Questions about running the XP on Vista Games

Similar Questions

• Cannot run the CD DVD-R games

  Separated from this thread.

  I have not optiarc driver DVD - RW DVD - RW AD - 7201 S 5 ATA but I have Optiarc DVD + R AD - 7700H ATA Device driver fully implemented at level and so I am unable to run the CD DVD-R games. And when I open the driver CD, it's just writtern y drag files to these folders to add to the disc and I drag the files it says please insert a writable disc.

  Looks like you have a bad CD player and need a new.

• Satellite A100-334: Question about upgrading from XP to Vista

  I need help to upgrade my A100-334 to vista!
  I use the disks provided by toshiba. It is said that the new Bios is already installed (vers.5.60).

  After running the second drive it says I need to uninstall Driver driver/BD DVD-RAM and Toshiba configfree.

  Then he said that the following issues will not prevent the upgrade of the execution but that some applications or elements may not work properly. The list is long.

  Here are some examples:
  Diagnostic tool for TOSHIBA, Sun Java Scheduler, TOSHIBA controls, Bluetooth TOSHIBA Power saver settings and so on.

  It is recommended to uninstall all of these objects?
  What can I do?

  I appreciate any help thanks - Detlef

  Hi Detlef

  Well, what to say if I understand your question you didn t make a new, clean install Vista, but you tried to upgrade the full XP to Vista.

  I don't wonder that this doesn't update good conduct and that you get notifications on the tools and driver compatibility issues.

  The fact is that many drivers, tools and utilities that are designed for the operating system XP don t run on the Vista operating system. That is why it s necessary and desirable to remove any programs that are not compatible with Vista!

  In my opinion, you must perform a clean installation of Vista, and then you can download and install all the drivers Toshiba Vista required and utilities.

  Best regards and greetings to Germany ;)

• vCo question UAC "run the program in comments.

  Hi all

  I fight on a question to vCo 'Running the program as a Guest' workflow by default.

  In fact I use it to call some Powershell Scripts on a network share because WinRM is not enabled on my VMs.

  The question that I myself is scripts are intended to be run from a "privileged" powershell prompt (right-click-> run as administrator when the interractive mode), otherwise does not work.

  But by default when I start powershell call scripts using the "program in the operating system performance invited', apprently it does not use the"privileged"mode.

  I tried to call one using powershell: start-process - runAs verb - ArgumentList ".ps1 file path" but does not work.

  UAC is enabled, it is perhaps the issue (when you do start-process-verb runAs - ArgumentList "path to the .ps1 file" in an interactive session, I got warning of validation UAC popup).

  Does someone had the same problem about UAC / run the program in comments feed?

  Any idea how I could get rid of him?

  Thanks in advance.

  Best regards

  Shane

  Unfortunately UAC DO blocks calls to run as a Guest that require elevated privileges. I have not found a way past this other than having disabled UAC. This might be acceptable during the deployment of virtual machines in a secure area "landing" of the network, allowing many operations comments that will take place, as a final step, then go VM OR appropriate to apply the strategy group that forces the UAC and then move VM out of the landing zone to its permanent home on the network.

• I can run the store bought Xbox game

  If I buy a game from the store I can return it

  Hello

  Your Question is beyond the scope of this community...

  I suggest that repost you in the Xbox Forums.

  "Xbox a Preview program FAQ.

  http://support.Xbox.com/en-us/Xbox-one/system/Xbox-update-preview-FAQ

  'Home'

  http://forums.Xbox.com/

  "Xbox forums.

  http://forums.Xbox.com/xbox_forums/general_discussion/f/3817.aspx

  _________________________________________________

  "Xbox Forums directory.

  http://www.Xbox.com/en-us/forums

  General

  • Home/FAQ/Forum policy

  • Community general discussion

  Material & Discussion Services

  • Equipment & Services

  Xbox support
  Agent hours: M - F 09:00-17:00 PT

  • Xbox 360 support

  • Xbox 1 support

  • Xbox on supported mobile devices

  • Xbox on Windows support

  • Networking of hardware information

  • Material information TV

  Law enforcement forums

  • Xbox 360 account Suspensions & Console bans

  • Account Xbox one & measures Console application

  • Announcement
    PLEASE READ. Introducing changes of case review & forum

  Technical support of Xbox Live rewards
  Xbox Live rewards Squad hours: M - F 09:00-17: 00 PST

  • Xbox Live rewards program announcements

  • Xbox Live rewards Questions

  See you soon.

• question about cleaning the sensor of the A57

  Dear community of Sony,

  I have several questions about the cleaning of the sensor of the A57.

  Recently, I noticed several dark specs appearing on images when shooting at low opening (F20, F22), especially when there are high for them (like the sky in a landscape photo) contrast. To my knowledge, I've categorized as possible of dust on the sensor. I have read the section of the manual about cleaning the sensor and followed the procedure. However, the problem remained. I have previous experience with cleaning of the more resistant the probe of a Sony NEX dust particles, so I applied it to the A57. I used the specialized sensor cleaning tools combining two parts kit - wet and dry. Noted little dust on translucent mirror as well, so I cleaned up afterwards. Later, I considered this mirror could have some specialized coatings.

  So my first question is: should I have done some permanent damage the mirror or the sensors? Currently, the camera works OK, although some features of dust still remain. It seems that I had pushed some of them to the edges of the sensor.

  I'm not so happy with the tool that I used. I'm thinking about this one for a more thorough cleaning:

  http://www.digitaltoyshop.co.UK/Eyelead_sensor_cleaning_kit_SCK-1_Sony_Alpha_A57_t2836_6789

  It is marketed as a tool for A57. Should I use it?

  Thank you in advance?

  Best regards Angel Marinov

  PS: I'm really happy with my Sony A57 and the NEX. They made me a fan of Sony. So, I want to use this topic to also say thank you to the developers of Sony.

  Hello Angel!

  Read the following steps carefully and let us know if you have any other questions.

• Question about importing the roles of users through LCM HSS 11.1.2.1 MSAD

  Hello

  We use Hyperion Planning version 11.1.2.1. I tried to export user and group provisioning to prod environment and migrate there in the dev environment.

  The following steps have been

  1 open Hyperion Shared Services Console

  2 expanded Application groups

  3. scope of the Foundation

  4. click on Shared Services. I got a list of artifact on a new tab on the right side of the screen

  5 expanded native Directory. Some groups (Checked), roles and users

  6 click on define Migration and then did then, then, then on the following screens until I got a popup asking to "run the Migration.

  7 enforce Migration, I received a folder created under admin@NativeDirectory with 2 subfolders (info and resources)

  I saw 3 csv files is created - Groups.csv, Roles.csv and Users.csv.

  Groups.csv contains all the groups and users in each group.

  Users.csv contains all the users belonging to the Native directory

  Roles.csv was surprisingly an empty file (don't know why)

  My question is

  1. how to export that 'Aboriginal group' has been implemented to what roles?

  2. how to export what Directory user external user (i.e. MSAD) has been put into service for what role?

  I need to import roles provided to the 'MSAD users' and 'Indigenous' of Prod to Dev env env. Since I'm not able to export to MSAD user roles and groups... I don't know how to do in this regard. Please help me with this. Thanks in advance.

  Assigned roles:

  http://www.Oracle.com/ocom/groups/public/@OTN/documents/digitalasset/103849.gif

  http://docs.Oracle.com/CD/E40248_01/EPM.1112/epm_migrate_planning_app/images/graphics/export_from_source_1.gif

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Question about running a test in a network things.

  Hello

  How do you do when you need to run/debug things connected to the network. It is only by connecting a device or use the Simulator?

  Fredrik

  The Simulator must make use of the network connection on the computer that is running the VMWare image.  You will not see a network icon, however since it is not actually connected to a cellular network or WiFi.

• Equium P200D - Question about running out of space on the HARD disk

  First of all, let me say that I am a Silver Surfer and don't know much about how works laptop or where it stores information!
  I don't am not in the least HI - TEC so please be gentle with me.

  I use an older Equium P200d for 1 year with two 40 GB hard drives each.
  My C drive has only 2 GB of memory left available while my E drive still has 30 GB.

  I have only 3.7 GB of programs loaded (according to the research of control panel) and I know that I have 4 GB of music.

  My query is - where is the other 30 GB missing?

  I made the Scandisc option and deleted all the stuff from there and a defragmentation procedure.

  Y at - it searches I can run to find junk I have more need?

  Any advice you can offer would be appreciated.

  Mikstan130143

  Hey Buddy

  If you are using Vista, then you should consider that Vista creates an additional partition on the HARD drive.
  It s hidden and it contains backup files in order to repair the operating system if something goes wrong.

  In addition HARD drive must also contain HARD drive recovery files (image).
  These files are required to recover the laptop HARD drive.

  So the hidden partition and the recovery of HARD drive that could be the main reason why you noticed smaller amount of space available on the HARD disk

  See you soon

• Question about running from two cameras at the same time with MAX

  Hello

  I have two cameras attached to NI PCIe-1430 frame grabber card (Atmel Aviiva M2 CL and Fairchild 2 K LS) IRLS. It's ok when I run two cameras individually, but I can't run them at the same time.

  This is the step that simultaneously run two device:

  1. open MAX, select the port and start image acquisition by pressing the 'Grab' button, I can see the image at this point.

  2. open another MAX session, select the other port and press "enter". I got following error:

  "Error 0xBFF60021".

  Unable to perform request; acquisition in progress'

  Sometimes, I got this error too:

  "Error 0xBFF60022".

  A timeout error occurred while you wait for the specified event. If you expect a picture, check the video data is acquired in the period. If in the meantime the signal, check that the assertion of signal has occurred within the period. »

  I already give enough timeout Fame to the tab settings of Acquisition.

  The MAX version used is 4.5.

  You have an idea on that? Makes simultaneous Imaging MAX support?

  Thank you

  -polarfox

  Thanks for the quick response Bruce.

• Question about running a filter on the service of the Complutense University of MADRID

  OK so I started almost in front of the finish line which understand me is: /.  Uh, I tried to learn how to use filters and I met an obstacle that confuses me.  OK, so I wrote a filter to just add "This is a test" to xComments, it is a simple test to prove a point before I push forward with a request.  If everything seems to be set up, made the file (compiled without any problem) class, the component and changed the .hda to point to the class file (I think); However, I get the error message "the content item was not verified successfully. Impossible to filter "filterFile' of type 'validateStandard '. java.lang.NoClassDefFoundError: filter/filterFile: filterFile (fake name filter/filterFile). »

  Here is the information about the filter

  Path of the class:.../custom/filterFile/classes/filterFile.class

  HDA file:

  classpath = $COMPONENT_DIR/classes

  Filters @ResultSet

  4

  type

  location

  parameter

  loadOrder

  validateStandard

  filterFile

  null

  1

  @end

  It seems that the filter cannot find class file, even though I said classpath is "$COMPONENT_DIR/classes" and put the location as "filterFile.

  Try to open your component in the component wizard.

  There are two things that you need to configure:

  (1) according to Build - build settings you should have defined an entry of the type Component class or Classes that will connect the additional component or directory linking to .jar (if your classes are packaged in a jar)

  (2) pursuant to Build - build settings - advanced should have defined the path of custom class

  From what you write, I guess 2) is (classpath =... in the name of the component.hda), but 1) might be gone (it is stored in manifest.hda)

  If these two work, check the package name and the name of the class. Note that you need both in your definition - package_name.filter_class_name

  In fact, it is not related to filters as with the use of Java custom in a custom component.

  If you think that you have done everything, but it still does not work, create a hello_world as a component which will print classpath for you, as it is visible from your JVM, for example by: String classpath = System.getProperty ("java.class.path"); and then, if your device classes are really there.

• Question about changing the refresh frequency for the perf of run-time statistics

  Hello

  I would like to know if there is no API or refresh rate of orders to change the provider.

  For example when I train to recover PerfProviderSummary.getRefreshRate () disk performance statistics, I see that the refresh rate is set at 20 seconds (by default). Call of PerfProviderSummary.setRefreshRate (5) has no effect on future calls and the refresh rate remains at 20 seconds.

  ESXTOP however to change the refresh rate up to 2 seconds.

  Thank you and best regards,

  Prashanth

  Hi Julie,.

  It is not possible to change the frequency of refresh in real time of 20 seconds. The vim. PerformanceManager interface is limited to a minimum of 20 seconds sampling period.

  In addition, it is always recommended to call the QueryPerfProviderSummary API on the entity to verify the refresh rate and use this query for performance statistics refresh rate.

  I hope this answers your concern!

  -Angela-

• Satellite X 200-219: Question about updating the display driver?

  Sad tales I've heard talk about manufacturers of laptop never updated to gfx card drivers apply to toshiba?

  Any info on the question of whether an update for their SLi systems drivers display is on the horizon?

  see you soon-

  The fact is that display driver cannot be updated daily as for desktop computers. Priority by the manufacturers of cell phones is worrying about the operation of the equipment. Using new graphics card drivers will be forced to run faster and better that offers better graphics performance. The result is essentially an overheating and may end with a faulty graphics card.

  In this case, the card mother together must be exchanged and it costs a lot of money. So, I think that no one can say with certainty when the next pilot will be available.

• Satellite A100-599 - question about updating the display driver

  Hello

  I have a Satellite A100-599 with a NVIDIA 7600go graphics card and I like most of you Bioshock game crashes because of some problems with the graphic card drivers, no pb... Meanwhile, NVIDIA has released some new patches for the Forceware and after I double checked the database of the Toshiba driver support I've seen a new version in the list of display driver for WinXp.

  One of them seems to be 13/09/2007. I have downloaded the drivers, installed them and then I checked the details of the driver in the Device Manager list and to my surprise the details say that the drivers are since 2006. I reinstalled the drivers and the same thing appeared. I checked the XML that was in archive of drivers and surprise... the drivers really are the 'old' of 2006. So my question is this: you have the display drivers for my model that work for Bioshock :D

  Best regards, Marian

  I Don t know if we. I think it would be took a long while to ask every single user: Hey, you have a few drivers for blackmodjo? Ah, come on, please. Some of them... ;)

  No, I have a better idea. It s like to cook a meal. Ingredients: DriverCleaner Pro and the www.laptopvideo2go.com site and... your your your TAAA patience

  To get a good 'bio' meal shocked just follow this recipe:

  Reach
  http://www.laptopvideo2go.com/
  read before doing anything (YES, even before you continue to BREATHE) the FAQ section on this site (RECOMMENDEDRECOMMENDEDRECOMMENDED)
  and then download the drivers. Do it, Yes...

  Then download drivercleaner by searching on www.google.com and THEN read their manual before doing anything else (Ok, you can continue to breathe..)
  After reading the manual you will be something like:

  1. program start, do something, restart the machine
  2. start in safe mode, from this program, deleting... yadayadayada
  3. install the new driver
  3. reading of Bioshock
  4...
  5. No... 6 thank. me and give me your first born... ;)

  So by cutting about 40% of my humorous things and following the constructive technical instructions from me, you will be able to play bioshock.

  Welcomes :)

• You try to run the backup under Vista, error 800704 3

  My computer uses windows vista Home premium. When I try to run a backup I get error code 800704 3. I don't know what is this error, anyone know and how to fix it.

  Hello

  make backups on an external hard drive or DVD

  see if this information helps you

  How to make a backup of your data (all Vista versions)

  http://www.vista4beginners.com/how-to-backup-your-data

  How to restore your files

  http://www.vista4beginners.com/how-to-restore-files

  the 1st link below is how do the backup complete pc (Vista, full and professional company)

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  and that is how do to recover the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial144.html

  and here is the information of microsoft in restoring a system image backup

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

  If you have problems with the repost of process above in forum microsoft link that is specific to the backup below questions

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads