Question about DVI on the Qosmio

Similar Questions

• Question about backup of the partition on the Qosmio G20

  Hi everyone, I was wondering is it possible to get the backup of your hard drive or the partition on qosmio g20? I tried the real picture, and ghost, but they could not get access to the qosmio scsi disks, when I ve checked toshibas recovery dvd I saw it is changed the version of norton ghost, so they must be necessary loading drivers on the start time of recovery disc, because I install a lot of software and change the config. I want to save my disk hard once everything is done.
  can anyone help?

  Hello

  Some time ago, I did some ghosting of Toshiba laptops, I have never had any problems. Perhaps there may be conflicts, if you are using RAID technology, or the Qosmio player on the first HARD disk area hurts.

  Sorry I can't give you more help.
  Good luck!

• where to post a question about iTunes on the iPhone?

  I have a question about a problem with iTunes on the iPhone (iOS), but I do not see a 'Community' with this title (or anything close;  I have no idea what "iTunes U" means).

  For lack of a better idea, I just posted to the community "iTunes for Mac", but I don't think that's true.

  Please let me know where I should post to an iTunes on iPhone issue.  Thank you.

  It should probably be posted in the community Using iPhone Apple Support communities. I'll ask a host spend your question in iTunes for Mac, if it has not already been moved.

  EDIT: Just read your message, and I think it's probably better where it is (because you need help syncing your songs via iTunes on your Mac). He should be fine here, but if the moderators believe that he should be somewhere else, they will move for you.

• Question about ActionBar on the first screen of the application

  Hi, I have a question about the actionbar behavior in the first screen of the application

  index.htm pushes immediately main.htm with actionbar. ActionBar clicks and responds correctly until I have add overflow on some buttons.

  When I click on the button of overflow, the overflow is displayed at the bottom of the page, the top of the overflow is put in correspondence with the upper part of the actionbar so buttons actionbar overflowing content is not visible.

  I reproduce this problem with the sample application.

  This is expected behavior? Is there a way around it?

  I was able to reproduce the problem and have connected it

  https://github.com/BlackBerry/bbUI.js/issues/329

• Question about to browse the lines of a viewobject

  I want to iterate over the lines of a viewobject. So, I use the following code snippet to do:

          String amDef = "model.service.TestAM";
          String config = "TestAMLocal";
          ApplicationModule am = Configuration.createRootApplicationModule(amDef, config);
          ViewObject vo = am.findViewObject("EmployeesView1");
          RowSetIterator iterator = vo.createRowSetIterator(null);
          iterator.reset();
   while(iterator.hasNext())
          {
              Row currentRow = iterator.next();
    System.out.println("Value: " + currentRow.getAttribute(1));
          }        
          
   iterator.closeRowSetIterator();
   Configuration.releaseRootApplicationModule(am, true);
  

  Now, I had a question about this code snippet. He get all records from the table of data to the model layer, that is, to the application server? If so, what part of the code for this? vo.createRowSetIterator maybe?

  Your example of code appears that I wasn't there. The default iterator and one that you get by vo.createRowSetIterator are different.

  And do not forget to close the iterator, you created as you lose in other resources.

  Timo

• Question about backing up the Lenovo factory

  Hi, I have an E530, I have a question about the Lenovo factory back, I'm a little unsure of the difference between the bootable media and just backup data.

  Is the bootable media just the equivalent to a disk of windows 7?

  the option data backup all currently installed on your laptop?

  I tried with the two checked options the other day and I got to the point where he solicited for disc DVD - RW 6 so I cancelled because I didn't know how much in total he would do, would be nice if he told me so I could better prepare.

  Also, if I was ever to use the data disks, would you boot from the startup disk you did first then also boot from CD 1 of the data disks?

  Hi James,

  We create these disks to customers of all time.  In our case we have Win 7 Pro, pre-loaded.  Win 8 discs are already included with the device.

  The process of factory recovery disks will create a set of disks [the E530 in the USA, to 4 DVD - Yes it would be nice to know how much to advance] will allow you to restore your machine out of the box.  The first disc it creates is a boot disk - you start from this when you start the recovery process - that's all it is. No file data/images for the restore process.  Other disks contain image files needed for restoration.  This does not save the user data. It is a different process.

  Since you started & cancelled the process, I'm not sure that it will allow you to re - burning the discs.  Because of the MS license restrictions, you are allowed to burn discs once.  We got all the way on the last drive and had the process fail [we don't know why - maybe bad disc?] and we cannot redo records because he thinks that we have successfully created their.  So, we have to call Lenovo support and ask them to send us a set of disks in Windows 7.

  I hope this helps...

  Al

• Question about mismanagement of the effects in the construction of sequence

  Hi all
  
  I read the BPEL 2.0 document and met a question about management failures and the normal flow of control in the < sequence > construction.
  
  For example, in the following code fragment:
  
  <>sequence
  < call...
  < catch faultName = gt; a.
  < / call >
  < receive... >
  < / sequence >
  
  If fault one is taken and processed by error handler, when the fault handling ends at will are receive > activity start or jumped?
  
  According to the document: < receive > will begin when < call > complements, but the 'complete' includes the 'ends in vain", (i.e. a fault is stuck inside the < call > and dealt with)?
  
  Hope you can help me and thank you very much.
  
  Published by: user8301699 on April 9, 2009 19:04

  Hello

  You have reason, 'full' includes the 'ends in vain", (i.e. a fault is taken inside the and treated).

  Hope this answers your Q.

  See you soon
  Rémy Pucha

• Question about graphics on the Satellite A200-1VO card memory

  Hello
  How do you assign more memory to the graphics card on laptop Satellite A200-1V0?
  Thank you

  Hello

  in your case it s not possible to change the size of graphics by yourself, memory as graphics memory in your machine is shared with main memory, so if you upgrade main memory and graphics memory should increase. But this question is governed by the chipset and the user has no influence on it.

  Welcome them

• Question about dual OS on Qosmio G20

  Have purchased a Qosmio G20 by the NHS. However the computer has been recreated to all machines include Win Xp, Office 2000, patches, check virus etc. to allow him to sit on the Exchange Server. Lost all data which however library, Qosmio Player. I don't know re-install by CD revovery discs. Can it work on dual OS, if I install on another partition? Help!
  HE says they can re-create the image to the characteristics of the original, but won't be able to sit through the network.

  Options?

  Hello

  If you want to recover your system first you must install the Qosmio Player, Media Center, and then the OS. The Qosmio player erased all your files on the HARD disk if you install the operating system first. In addition, you can use your laptop with dual operating system. You need to create a primary partition and you can install the second operating system. To create the partition, you can use partition Magic 8. It s interesting a tool.

  Good bye

• Question about 3D games on Qosmio F750 - 1013 X

  Hello

  Now that I look at 3D movies work very well for me... I think try 3D games.

  First of all... in order for me to play games in 3D, what I buy labeled games like 3D games or component of Nividia in the laptop can kind of convert all 3D games?

  Can someone guide me through the steps to play a 3D game?
  Examples of games that I can play 3D?

  See you soon!

  Hello

  Please take a look here.
  + Support of glasses free 3D mode for games on the Qosmio F750 +.
  http://APS2.toshiba-tro.de/KB0/TSB1C038G0000R01.htm

• QUESTION about to connect the calling WinsCard.dll drive

  could not get the list of player and connect the player successfully by call winscard.dll under C:\Windows\system32 folder in my local PC, but the other PC could do that.

  My PC environment: 2002 XP, SP3
  the version of winscard.ll is August 4, 2008

  Hi Yang Yu,

  1. Is the issue with the computer recognizes the card reader or the card reader can't read the card?
  2. What is you receive the exact error message?
  3. What is the number and the model of the card reader?

  Refer to the article below and try the steps mentioned, if you use Windows XP Professional x 64 edition.

  A universal serial bus smart card reader that is connected to a Windows Server 2003-based computer may not detect the smart card

  http://support.Microsoft.com/kb/919922

  Your question does contain all the required information necessary for us to help you. Please provide more relevant information to continue troubleshooting as a result.

  How to ask a question

  http://support.Microsoft.com/kb/555375

• Question about vMAC on the DLR LIF

  Hello

  Based on the design of NSX Guide: "every LIF has assigned an IP address, which represents the default IP for the logical segment L2 bridge, it connects to a vMAC address. The IP address is obviously unique by LIF, then that same VMAC is attributed to all LIF defined"

  This test in the HOL laboratories, I started a ping from 172.16.10.11-> 172.16.20.11.  I configured a mirror port with source such as app-sr-01 a (172.16.20.11) (not available on servers web/app HOL tcpdump!). Looking at the MAC addresses on the package 'in' GRE encapsulated packet (see below cliché) I have a few questions:

  1. whence the source MAC on the 00:50:56:f1:f7:a2 of ICMP request packets? What cli command would show this MAC address?

  2. If each LIF must have the same vMAC, "arp - a" output on the corresponding servers shows different MACs for 10.1 and 20.1 LIF.  Is this expected or a Nested lab thing or did I miss something?

  

  1 MAC SRC in the query is almost certainly a pMAC for the ESXi server where the web-sv-01 has. You should be able to see in "net-vdr - C-l" running on this host.

  2. "arp - a" output for your web-sv-01 a don't look right, you should see VMAC (02:50:56:56:44:52) for all DLR LIF. What version of NSX do you use?

• Tecra A2: Question about DVI and external monitor

  Hello
  I am trying to get a DVI Signal of the Tecra A2 using the Advanced Port Replicator III but without success. The A2 does support DVI anyway?
  Another question: is it possible to set up the main display to the external monitor using "extended Desktop"?

  Thank you
  Ralph Menon

  Hello Ralph

  Your unit doesn t support DVI port and you can't use it. As far as I know just the ports that you can find on the device, you can use in Port Replicator because the signal is just loop through.

  The problem with the screen is that mobile has the main value and it cannot be changed (on my Tecra M1 nor). The windows will be implemented on an external but password box will always be displayed on the screen of the laptop.

  Good bye

• Question about consumption on the Satellite A660-10W

  My A660-10W (new) was wrong and Toshiba (Mafil in Israel) has changed the hard drive.
  Now the computer acts differently that before when I got it like new.

  For example; and my question is:
  1. After about 15 minutes, it automatically goes into sleep mode.
  I understand that the setting can be changed, however I would like to know if this happens when something is running?
  either I left the WD external BACK-UP running, but he fell asleep...
  2. the same thing will happen if Im watching a movie, for example?

  Thank you

  Laptop can't handle in different way. I guess you are using the recovery of images (Toshiba original Win7) and parameters are exactly the same as before.
  # Yes, you can change it. Simply enter the change plan settings for the power plan that you use, and where you can change the time when the laptop should go to mode "Eve". You can also disable using Pétion NEVER.
  # I can't say with certainty, but on my computer laptop doesn t go "standby mode", when I watch the movie. Test it. Set for 2 minutes and put on a movie.

• Questions about some of the keys on the keyboard

  I have Windows 7 and some of the keys on the keyboard are unknown for me. I tried to get these stars, but I got about 30 different answers and didn't know we had the right answer.

  I have a Pavilion Elite HPE-450f

  The symbols following, unknown to me at the moment are 'Fn' next to the 'Ctrl' key on botton left; a symbol of the Crescent Moon on the "F2" key a left double-arrow on the F5; a symbol unique arrow right/pause press the F6; right double stop on the F7 and an arrow symbol on the F8 key. These are the only ones that I have questions on.

  Thanks in advance for your help.

  While pressing the fn key, the arrow keys serve as common controls of media player.

  FN more Moon puts the computer to sleep.