Tecra A2: Question about DVI and external monitor

Similar Questions

• Satellite L555-10R: Question about using an external monitor with 1920 x 1200

  Hello

  I have this toshiba laptop: L555-10R

  I want to buy a screen external 24 "to use for CAD

  Please can you tell me, my graphics card composed with run at 1920 x 1200 monitor, and a second screen 1600 x 900 at the same time see my cell phone?

  I really want the 1200 vertical height of the external display for CAD work such as size of the screen vertically made a big difference.

  If not, is there anything I can do about it to update the graphics card from the laptop?

  If not, can you suggest a new laptop that would support this? I am looking for excellent performance for rendering using 3DS Max, autocad, sketchup, etc.

  Thanks in advance
  Christopher

  > Please can you tell me, my graphics card composed with run at 1920 x 1200 monitor, and a second screen 1600 x 900 at the same time see my cell phone?

  I think that this should not be a big problem
  The graphics chip is expected to provide support for 1920 x 1200.
  The question is whether the graphics card driver contains such special resolution of 1920 x 1200

  However, you can certainly choose two different resolutions for the screen internal and external monitor.

• HP ENVY 5830 HDMI / DVI and external monitor not detected

  I have a HP Envy 15 with the ATI 5830.  I want to connect an external monitor.  The outside is a Samsung SyncMaster P2770HD and has a DVI (also has HDMI, but poor quality when used from a PC). My laptop has only HDMI.  When I use a DVI - D HDMI converter / my laptop does not detect that there is an external monitor.  I've lived all my settings and updated the Bios and video drivers.  I'm missing something. Appreciate any help.

  Hmmm... Looks as HDMI / DVI - D adapter for me, like the HDMI port problem works well insulated... I don't remember any problems, I've heard of HDMI to DVI - D and untimely on Envy 15...

• Tecra A5: Question about usage and warranty

  Once again, Hej
  Thanks a lot for your responses to my previous threads.
  I saw the Toshiba Tecra A5 only in photos, some of you have one of these?
  My Toshiba model (A5) favorite cams with 2 years warranty and support, but what happened after these two years?
  Can I expect to use a Toshiba for more than two years, as I would like?

  In fact, I expect to use this laptop for three years and have no problem with him :)

  Hi Liviu

  Please see the second section where you posted the same question:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=12546

  You will find a big answer for your question.

• Question about business and Service of Proxy

  Hi friends,
  I have a question about services and proxy services business IE I need to find the time it takes to call an operation on multipoint business of proxy service, how can I do in oracle service bus (OSB)? You can help quickly

  If your question is only about the performance analysis,
  try to activate the 'monitoring' on the 'operational' of the Service Proxy Service/Company tab.
  For the Proxy Services, if you activate at the level of the 'Action' you get a lot of information about each individual action in a power of attorney.

  See http://www.javamonamour.org/2011/06/osb-profiling-your-proxy-service.html

• About a month ago I posted a question about iMovie and not being able to "share". I solved the problem thanks, so no more emails!

  About a month ago I posted a question about iMovie and not being able to "share". I solved the problem thanks, so no more emails!

  Hi Michael,

  If you want to stop receiving notifications by electronic mail, in the thread, that you have created, then I suggest that you follow the steps below:

  One time connected to the Apple Support communities, visit your mini profile and select manage subscriptions.

  

  Content

  To manage this content, you are currently subscribed and changing your preferences, select the content.

  Select next to see what content you are currently following.  Note that any thread you are responding you subscribe you automatically to this thread.

  You can select to terminate a subscription to a thread.

  

  Learn how to manage your subscriptions

  Take care.

• Tecra A10 - BSOD with Port Replicator Port and external monitor

  Hello

  I have a Tecra A10 PTSB0A 05C023 with XP SP3 on an Express Port Replicator, running to an external monitor (1280 x 1024) on VGA. Works fine for a while then seems BSOD spontaneously when not in service - possibly when screensaver or powersaver comes into play.

  BSOD is a STOP 0x0000007E in igxpmp32.sys

  I downloaded and installed the latest video drivers intel from the Web from Toshiba - 6.14.10.4953 site

  Any help or advice by eliminating the BSOD would be greatly appreciated.

  Kind regards

  Rhys.

  Hi mate,

  I asked Google to igxpmp32.sys and this file belongs to the Intel display driver. In your case, I recommend the page Intel searching for the latest display drivers.
  [www.intel.com]

  Also have a look on the Toshiba site for a BIOS update, or you have already installed the latest version of the BIOS?

  In addition, it would be interesting to know what Port Replicator you use exactly. Can you post the model number?

• Portege M800 and external monitor Dynadock question

  I have a M800 connected to a U Dynadock docking station.
  I have problems when I try and put my external monitor as the primary device and have the cell phone as the extension to monitor.

  I am running Windows XP.

  Are the only options it will allow: Clone, Extended (laptop is main and external is the extended option)

  If I use the WIndows graphic option it does not put the external monitor as the main display (I check this option and click on apply and it remains unchecked)

  If someone could help that would be great.
  Otherwise, I would recommend is not to use the dynadock

  Sorry mate but I still don t understand what you are talking about what problem do you have?

  Is the Dynadock video drivers give you the ability to view a total of three screens.
  -L' screen of the laptop.
  -external monitor connected to the video port on the laptop (if available)
  -ewxternal monitor connected to the Dynadock

  In addition, you can use mirror Mode and Extended Mode.

  Mirror Mode creates an identical view between your computer screen and the external monitor
  Extended mode extended Mode lets you split your display on multiple monitors.

  These are the features that you can use with Dynadock

• Question on the docking station and external monitor support

  Hello

  Can you please let me know of the docking station (name, model number, etc.) I need to connect to two external monitors to my hp laptop 8560w (not the laptop screen).

  Thanks in advance

  rogers7942

  This allows 2 additional monitors in addition to the laptop screen:

  http://h30094.www3.HP.com/product/SKU/10432932

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Tecra M11-LaTeX runs slow on external monitor using Express Port Replicator

  Hi all

  I am having trouble with my Tecra M11 with an external monitor, through an Express Port Replicator II.

  It is very accurate, but I am running texlive 2010 on my laptop to write a thesis. Whenever I use my laptop screen feature is very good, and it works very fast, no lag when I compile my document. As soon as docking it into my docking station at work to use it on a big screen, whenever I use the same program, it slows down a lot, finally causing the crash program. Its frustrating to lose a lot of your thesis like this! When I connect the external monitor directly to the laptop, it works fine again.

  Something goes wrong in the docking station. Anyone know how I can fix this? Im a little confused and ideas. Maybe I pilot or something im unaware of. My docking station is maybe defective?

  Thank you

  Jake

  Port replicator port on which do you use? VGA or DVI?

  It won't be easy to provide the answer to your question. It is not possible to test all the software available with docking station and research solutions.
  I would say: bad luck.

• Tecra S1 - black screen even on external monitor

  Hello

  I'm not sure if this is the right thread for this, but here goes: I have a tecra s1 who was working fine then one day. I turned it on all I get a black screen. I suspect that it's the hard drive but not 100%.

  I tried to connect to an external monitor as the same just a black screen. My question is this laptop does not start if the hard drive is bad I think it would be at least got to the bios screen, but I get nothing but a black screen.

  any help would be appreciated thanks.

  Hi cracypcguy,

  For me, this looks like a hardware malfunction if on an external monitor, you can see a white screen also. In addition, I doubt it has something to do with the HARD drive. In this case you should see the screen of the BIOS at least.

  Anyway, in your case, I'll ask a maintainer approved assistance. Technicians can check your laptop parts and the exchange of defective material.

  I hope I could help you! :)

• Tecra Z50 - need to connect two external monitors

  I think to buy Tecra Z50, but one of the features that I need is the ability to connect two external monitors.

  Is it possible to have a monitor connected to the HDMI and a VGA (with computer laptop lid closed)?

  * Hi-speed III Port Replicator is not an option, because it is not available in my country (Croatia).

  Hello

  I don t think you will be able to connect two external monitors to this laptop using HDMI and RGB port at the same time because of different types of signals.

  The RGB/VGA port supports analog signal.

  The HDMI port provides the digital video output and when the external monitor is connected to the HDMI port the device is set to HDMI.

  > * Hi-speed III port replicator is not an option because it is not available in my country (Croatia).
  What of the Dynadock? Its an external device connected to the s for computer laptop USB port.
  It supports own graphic unit and you can connect to another external monitor such Dynadock 2nd.

• Tecra S1 - display problem, even on external monitor

  One day I was using the laptop, surfing the net normally, everything was fine and suddenly the screen went bad... (photo below). I tried using an external monitor and still the same, so I'm sure that my monitor is fine and it is probably a problem of display card?
  I tried to update my display card driver and no luck, so I decided to use the recovery CD to restore the system and no luck once again.

  Here is a screenshot after the system restore... y at - there a way to fix this without taking it to a service center?
  Thank you
  Link: [http://i130.photobucket.com/albums/p262/ctb205/mon.jpg]

  Hi borist,

  It s really great that you could post a picture of your problem. Thank you!
  In addition, you have already tried a lot of as the recovery facility and an external monitor.

  Unfortunately, it seems to be a hardware malfunction of graphics card. :(

  This means that you will need to swap the motherboard because the graphics card is fixed on it. Motherboard is a party quite expensive and Tecra S1 is old notebook then maybe you can get a second hand or laptop motherboard on eBay and swap it out.

  Good luck! :)

• Satellite U300-113 and external monitor use

  I have, what I thought until very recently, a very simple need: I would like to connect an external monitor on my laptop, but on the continuation of the investigation things seem much more complicated about resolutions natives and elongation.
  Is there anyone who could recommend an acceptable quality monitor that is proven to work?

  I think that you should check the resolutions supported for external monitors and I think you can find answer in user manual s on page 119. To have a perfect image on external screen, you should buy external display with a native resolution listed in the table of user s manuals.

  Also talk to your local dealer. Perhaps you can test the functionality in the store before buy you.

• Portege M400: Port Replicator support DVI and analog monitor

  Hello

  I use my Toshiba M400 in the duplicator.
  The duplicator has two outputs to a DVI and an external analog output display.

  I would use both screens at the same time under Windows Vista RC1.
  The port replicator manual mentions that this should be possible depending on the connected computer.

  "According to the computer connected to the port replicator, you can connect external monitors to DVI port and the port external monitor and display on both screens at the same time."

  Someone he knows the M400 which supports? I only get the external DVI monitor or at work.
  (He used to work with my old others and this function was just great).

  A big thank you in advance.

  Rogier

  Hello

  I'm not sure but pretty sure you cannot connect two external displays at the same time due to the restriction of graphics card for laptop to 100%. You can stretch relative to your office for two screens (one internal and external) or have the same image on laptop LCD and external TFT connected DVI or RGB port.

  If I read the sentence you have posted I realized you can use two ports (according to specifications) and use two screens on the same time screens (laptop screen and an external).

  All available modes to switch the display to the external one, you can check with the combination of keys FN + F5 or in change of display tab tool mobile extension of Toshiba Service.