Question about memory timmings on the Qosmio F50-10

Similar Questions

• Question about memory upgrade and warranty - Qosmio G20

  I'm looking to upgrade the RAM in my Qosmio G20, but if I buy little ram in a store and fix myself (replacing the old RAM) void my warranty? (it is still covered by the extended warranty now)

  Don t worry! You can upgrade the memory and the guarantee will be cancelled not!
  You can do it yourself. It is very easy and I presume that the detailed statement is in of the Qosmio G20 user manual.

  Best regards

• Cannot install Windows XP on the Qosmio F50-108

  I got the Qosmio F50-108 with Vista.

  I dislike Vista so I tried to install XP.
  Unfrtunatelly, I get a BSOD every time XP takes over for the first time (startup). Usually, when there is a problem of sata, XP tells you while there's no HARD drive, but I do not get this message, I get a BSOD.
  I don't know why there is no support for XP in fact I know that Microsoft paid toshiba to stop supporting Windows XP.

  Is the thing that drives me crazy, YOU CAN INSTALL WIN XP ON EVERY APPLE COMPUTER MACINTOSH, but you can't do it with a Toshiba.

  I know that there is a possibility, I know that an update of the bios might help, but toshiba does not.
  Dear Sirs to Toshiba, I know you know what I have to do in order to get XP running on a Toshiba computer, so please, help me.

  Hi guys

  You can install XP on each laptop Toshiba. But you knew how! : D

  Your Windows XP CD must contain the SP2. This is important because the new laptops no matter which manufacturer need SP2 patches due to some hardware compatibility issues!
  Without the SP2, you will receive a BSOD!

  Then, the new notebooks support SATA drives hard and new SATA controllers!
  Windows XP and Vista operating systems do not contain the SATA drivers, and therefore you must include first before running the installer of the OS.
  Or you can disable the SATA in the BIOS. You will need to switch from AHCI to compatibility mode.

  Then, you must install the XP window successfully.

  So finally, I must say that I really don't understand these comments like this:
  > Is the thing that drives me crazy, YOU CAN INSTALL WIN XP ON EVERY APPLE COMPUTER MACINTOSH, but you can't do it with a Toshiba.
  OK, I see you're frustrated because you cannot install the operating system, but he must know that this is not a problem of laptop, but it is only a case or a knowledge!
  So maybe you should learn more about new technologies and you'll know how things are working. ;)

  To all here-> greetings & peace;)

• When the Qosmio F50 come out?

  I waited for the new Qosmio F50 for ages - all Toshiba information seemed to indicate he should be out, but it is impossible to find anywhere - and cannot all other info!

  The X 300 (who appeared in all the ads to launch the F50 and G50) now seems to be available.
  But there is now news, no reviews or anything on the F50.

  Everyone has heard about why it was delayed, or when it may be available (I'm in England)?

  Thanks in advance!

  Hello

  Already, the Qosmio F50 turned out!
  For example, the Qosmio F50 - 10 M was released on the German market.

  The Qosmio, Qosmio F50 - 10Z PQF55E-01J026EN there are already on the British market.

  Maybe you should Xbox a bit.

  See you soon

• How to configure the buttons on the Qosmio F50 - 12J LED?

  I've recently upgraded to Vista with Windows 7 Ultimate edition. I downloaded the drivers of value added package and it seems to work, but I can not configure some of the buttons because when I press the LED button and the support of key Toshiba starts there is not some options for the buttons that were there in Windows Vista...

  Is there a way I could add the same button options I had with Windows Vista?
  My laptop is the Qosmio F50 - 12J and I use Windows 7 Ultimate 64 bit.

  You installed a driver of Flashcard support? You can download it from:

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

• Webcam on the Qosmio F50-126 error

  Hey... I'll try to keep this as short as possible:

  I used to use my webcam on the Qosmio F50-126 regularly. Until a few days ago the media key won t open camera assistant software Toshiba.
  Weird - I decided to go in the program file and open it from there. When I got tired running the application, an error message appears, said, I don't remember the exact words, but it was something like: "could not create the main/c, please reinstall the software I thought OK, I uninstalled all apps, rebooted, downloaded the installer and ran again the application.»

  I still get the same error... Help, please

  Nice! Great that you share it with us!
  Thank you!

• Satellite C660-1F1 - Question about newer drivers and the speed of the memory

  Some of the drivers for this laptop are outdated compared to the most recent drivers on peripheral manufacters website. Is it safe to use these new drivers or is it recommended to stick with the old drivers that are on the Toshiba site?

  And second question: is it possible to make the fastest possible working memory supported? Don t BIOS options include options for the parameters of memory. Why the memory is running as low mhz in case of default? CPU - Z shows that the current frequency of dram is 532, 2 mhz. What is the maximum, it is at 667 mhz? Probably she can´t be 1 066 MHz as promised in the specs?

  Hi cryogenized,.

  > Some of the drivers for this laptop are outdated compared to the most recent drivers on peripheral manufacters website. Is it safe to use these new drivers or is it recommended to stick with the old drivers that are on the Toshiba site?
  Why you want to update your drivers? Do you expect a gain of performance with newer drivers?

  Way General, with official Toshiba drivers you are on the safe side because they are pre-tested. If you can make sure that they work properly and don t cause property damage. Install the other drivers happens on your own risk!

  > And second question: is it possible to make the fastest possible working memory supported? Don t BIOS options include options for the parameters of memory. Why the memory is running as low mhz in case of default? CPU - Z shows that the current frequency of dram is 532, 2 mhz. What is the maximum, it is at 667 mhz? Probably she can´t be 1 066 MHz as promised in the specs?
  The laptop is equipped with modules of DDR3 1066 MHz and the RAM speed is dependent on the FSB of the processor. If your CPU is throttling down, RAM modules will work also on low speed. On a high utilization of the processor (100%) the RAM modules must run with speed of 1066 MHz I think.

• Upgrade memory and disk SSD Qosmio F50-108

  Hello!

  After 3 years, I decided to upgrade my [Qosmio F50 | http://eu.computers.toshiba-europe.com/innovation/jsp/SUPPORTSECTION/discontinuedProductPage.do?service=EU&PRODUCT_ID=1 055727 & DISC_MODEL = 1] new SSD and additional memory.

  With a drive, I'm pretty well agreed the [Intel 320 120 GB SSD | http://www.intel.com/content/www/us/en/solid-state-drives/solid-state-drives-320-series.html], unless you recommend something different maybe?

  But I have the problem before deciding what size memory to take. Now, I 3 072 (2 048 + 1 024) MB DDR2 (800 MHz), and CPU - z says it runs in mode dual channel with timings 6-6-6-18(on memory stick it says 6-6-6-12?). I watched [Patriot DDR2 SO-DIMM 4 GB 800 MHz | 787 http://patriotmemory.com/products/detailp.jsp?prodline=3&catid=33&prodgroupid=59&id= & type = 5], and he said just in time of latency case 6. I have not found on the internet what timings there so I have a question:

  If I buy 1 (one) memory stick (Patriot) and replace it with 1 GB stick in laptop, old 2 GB + 4 GB new work in dual channel, or do I have to buy 2 x 4 GB (Patriot)?

  If this does not work, you rather 6 GB with channel single or dual channel 4 GB.

  Thanks for all the answers!

  > I pretty much agreed with drive, Intel 320 120 GB SSD, unless you recommend something different maybe?

  I think it shouldn't be a big problem with the compatibility because the HARD disk controller supports the SATA interface and the SATA SSD drive should also be compatible.

  > If I buy 1 (one) memory stick (Patriot) and replace it with 1 GB stick in laptop, old 2 GB + 4 GB new work in dual channel, or do I have to buy 2 x 4 GB (Patriot)?

  Dual Channel does not require two execatly the same memory modules.

  So, theoretically, you can use a module of RAM 2 GB and 4 GB RAM module.
  I advise to use 4 GB of RAM in A slot and 2 GB of RAM in slot B

  But the two modules must supports the same speed (800 Mhz), otherwise the module more quickly would be pointing down.

• Problem on the Qosmio F50 - 10Z card reader

  I had this problem for a while, he started with the original OS Vista 32-bit, so I decided to buy the cd to upgrade toshiba for windows 7, after the update level, everything worked fine, except for the card reader, regardless of how many times I have installed/uninstalled, installed the driver, it wouldn't work!

  So I used the recovery cd, not once BUT TWICE, and nothing helps I sent to repair.
  I received a message on a piece of paper telling me that it would work on the original operating system, I thought that they had something fixed.
  Then I used the recovery cd AGAIN and to my excitement thrown short to see any yellow explanation points I put a micro sd card (2 GB) that worked when I bought this laptop first and got no response.
  The biggest problem is that my warranty is now closed!, so basically, I've been HIT MORE, cause the memory card slot does NOT WORK and it wasn't a software problem!

  Any reccomendations?

  Hi karimtarek,

  Which driver version you are using on Vista and Windows 7? My Qosmio F50 is running Windows 7 and I m using the version of the driver on Toshiba page 1.00.29.02.
  You use the same version?

  In addition, it would be interesting to know if the SD card has worked once you have received the notebook service center back. Have you tested before or did you start installation recovery immediately?

  Have you tried different brands of SD cards? I always use the SanDisk Extreme cards because they did not no problem.
  In addition, you could try updating the BIOS. Maybe this works if you are using an older version

  Last but not least if it s does not always work and you think that it s a hardware malfunction, ask at the center of service again. If you speak a bit with technicians, maybe they can fix it as a gesture of goodwill.

  Good luck! :)

• Wake up the Qosmio F50 - 10G system mode 'sleep' and boots account locked window

  Why when the laptop is put to sleep and left for a while, flashing light and stops when you press the power button / laptop will wake up showing the BIOS screen then boots in the window account locked?

  Why I get this is event viewer? Source ACPI
  The embedded controller (EC) data returned when none was requested.
  The BIOS may try to access the European Community without synchronization with the operating system.
  These data will be ignored. No further action is necessary; However, you should check with the manufacturer of your computer for an updated BIOS.

  When Windows 7 starts, the icons on the desktop, menu start and records are white then start then normal fill when seen once again, any reason why?

  I used Windows 7 drivers.

  Thank you

  Hey mate,

  I have too many Qosmio F50 and you can change the option if, after hibernate or stand-by the account should be locked or not. As far as I know that this can be changed in power management.

  About this window of Event Viewer, I never heard talk about this and my Qosmio F50 works fairly well with Windows 7. You have installed all the drivers for it? You have yellow exclamation marks in Device Manager?

  I also used Windows 7 drivers, but did you download from the Toshiba page? These drivers are pre-tested and normally should work pretty well.

• Not possible to install the printer on the Qosmio F50

  I have a Qosmio F50 - 10 M, running on Vista 32 bit SP2.
  I tried several times to install a new color printer HP Laserjet MFP276nw 200 without success. The error text is not specific...
  The installation software, I should contact my provider of system support.
  Well, I'm here...

  Does anyone have any ideas how to install this printer on my system?

  Kind regards
  Kai

  To be honest with this problem. If your laptop works well, and the OS is stable why laptop of the manufacturer must be responsible if there is a problem with the installation of the software of third party?

  In my opinion, you should contact the printer manufacturer software and ask why you cannot install their software on many working Windows System. I use HP 120 Envy with my machine and I had no problem at all (win7 64 bit).

• Need some guide to the Qosmio F50-108

  Hello

  I was wondering if I can get a guide how on my qosmio F50-108... my fan makes a big noise really.
  I want to check what is going on... my warranty has expired 4 months ago... So can I get a guide please?

  Problem is that the "Maintenance manuals" are not a public document and cannot be downloaded.
  You want to disassemble your laptop and clen it upward?

• Screen not switch on the Qosmio F50 - 10Z

  Hello

  Recently, I received my laptop Toshiba Qosmio F50 - 10Z (yesterday), I am very pleased with. However I seem to have a problem with the screen does not reverse when you start the laptop in sleep or hibernation mode. I tried to change the output screen (Fn + F5) but it makes no difference, and the laptop screen is always off. I need to cut my machine (5 seconds by pressing the button / stop) and restart manually. Then, the screen lights up again.

  It doesn't seem to be drivers updated compared to those I already have / preinstalled.

  I hope someone can help solve my problem.

  Thank you

  The story is really strange for me also
  I'm 100% sure that Toshiba provides new laptops and if you bought a laptop with a few scratches then you should blame your laptop for the same problem dealer

  Maybe the dealer of the laptop used this camera for a show or similar

  Welcome them

• Boot from the disk ESATA on the Qosmio F50 - 10Z

  Hello

  is it possible to boot from an external drive using the ESATA port?
  I have BIOS 1.60 installed but I don't see an option for ESATA?

  What a USB? Laptop is a Qosmio F50 - 10Z

  Thank you

  I think that it of not possible to start from eSATA. The BIOS should provide this type of functionality.
  I've never tried, but I think that's not possible.

  As far as I know, it must be possible to boot from a USB device.
  The BIOS does not support this then try it.

• Slot PCMCIA (Express card) does not not on the Qosmio F50

  I have a new notebook from Toshiba Qosmio F50.
  I am in the express card slot allows you to display images on a CF card, but it does not work, it does not detect anything.

  Any idea? Should it be turned on at all?

  Do you use an adapter to view the photos on a CF card?
  Maybe this card will not take in charge the laptop.

  And do you see anything in the Device Manager?

  What happened when you use the CF card with a USB card reader? Similarly?