Question about RAM on Satellite P100-186 extensions

Similar Questions

• Question about video drivers Satellite P100-257

  Hello.
  Question about video driver. Version 14.25... Works (tells... 945 GM chipset); 14.27--works but with ocassional problems (tells... 945GM/GU); version 14,29... (said 945GM/GU) - does not work at all - black screen, but you can hear sounds which tells that XP does all right.

  Why that? And what is GU? Pilot info says it is for 945GM, pilot says he's for 945GM/GU.

  All kinds of three said they are for Mobile Intel 945 GM Express chipset. Who initially my machine have said there. In section "video card" my machine said no Intel - some Calg... - don't remember exactly the name.
  Thank you very much.

  Hello

  As much as I know Satellite P100-257 supports the graphics card Mobile Intel 945GM. The code name of Intel's GM Calistoga
  This is not the same thing as the chipset Intel 945GM/GU. Both are different and so the graphics drivers are not totally compatible!

  The Intel page provides some interesting info on these chipsets:
  Mobile Intel Express Chipset 945GM

  Unfortunately, I have not found anything on the 945GM/GU.

• Question about graphics on Satellite P100

  I have a question, I want to buy the toshiba satellite p100-188, but I don't know if I can change gf 7600 GF 7900 or 7800gtx? Thanks ;) because in france is available in p100-198 with gf 7900 is it possible to order this wersion to the United Kingdom? Thank you once more: P

  Hello

  You can order the Satellite P100 of the United Kingdom, but in this case you will have keyboard UK and WXP on the English language.

  Graphics card fair exchange is not possible.

• Re: Question about RAM on Satellite M60-135

  Good evening

  SRY for my English in advance ;)

  I intend to increase the RAM of my M60-135 Satellite. On the home page, I found two corresponding modules.
  One is PA3411U-2M1G and the other is PA3411S-2M1G. The descriptions for the two modules are exactly the same (1024 MB (1 GB) memory PC2-) 4300 DDR2 (533 MHz).

  Can someone tell what is the difference between them?

  Thank you very much for your answers. :)

  Always it is that you should be able to use all modules of memory manufacturers of different modules that supports the specifications on the right;
  The Satellite M60-135 supports the DDR2 533 MHz (PC2-4200) 200-PIN SODIMM memory modules.
  Details can be found here:
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=20096&ft=m&St=3

  Best regards

• Question about RAM for Satellite A100

  No standard memory pa3412u - 2M 51 (512 MB 533 MHz) with PA3411U-2M1G (1 GB 533 MHz) will work properly?

  My laptop is satellite A100-847

  Hello

  Both modules must support the same specifications! But you can mix sizes of 512 MB and 1 GB module
  DDR2 533 MHz PC2-4200 modules are compatible with the Satellite A100.

• Question about RAM in Satellite 1100

  My son has a laptop only 128MB RAM module installed. I want to improve this at least 512 MB.
  I don't know if I should order HIGH or LOW DENSITY RAM?

  Hello

  I Don t understand what you mean with 'HIGH' or 'LOW' RAM density. To upgrade your machine you need only SDRAM PC133 and that's all you need.

  No ram special xxx-density, only "PC133 SDRAM" and something like this-> http://www.memorysuppliers.com/144pinpcsod.html

  I hope I could help

  Welcome them

• Question about RAM in Satellite A100-192

  Hello! Help me please. I can replace standard Ram (512 MB, 533 Mhz) on nine with frequency 667 Mhz? So also, will it work?

  Theoretically, you can do this, but there is no sense because the motherboard works with 533 MHz front bus and it is better that you can use the compatible memory module:
  512 MB DDR2-533 PA3412U - 2 M (51)
  1 GB OF DDR2-533 (PA3411U-2M1G)

• Question about Directdraw on Satellite P100-429 (pspa3e)

  When I try and play a game on the phone he said he "could not initialize graphics. Make sure that the video device and driver are compatible with direct sampling. »

  Are there any drivers out there? I think that the graphics card to an nvidia geforce 7600 128 MB.

  When I use the website of nvidia drivers do not seem to work with the laptop!

  Hello

  Please check if DirectX has been installed on the laptop.
  As far as I remember the most recent version is 9.0 C.

  After installing DirectX, please start the application with the dxdiag command. Then the DirectX must begin and there you can activate the Directdraw acceleration.

• Question about RAM

  Hi, I have question about ram because I'm so confused how this works.

  on my computer it says quad core and 6 GB of ram doesn't mean it all to combine them is 6 GB of ram? or each one is 6 GB?

  on my system config it says 6 GB so it means that each of them is 6 GB?

  and could you explain how to work this thing of hearts?

  Hello

  If your laptop is 6 GB of ram, it will mean that it is a 4 GB module in a slot and a 2 GB module in the other.  You can always refer to download and install the application at the link below.

  http://www.CPUID.com/softwares/CPU-z.html

  One time installed, launch the application, click the SPD tab and you will see the size of the memory card in the location selected in the drop-down list.

  More info on multi-core processors can be seen here.  Details in this regard are visible in the CPU tab on the above application.

  Kind regards

  DP - K

• Question about RAM CL

  Hi guys. I'm finalizing my PC build and I have a question about ram CL I can't find answers for hackers page here. http://ppbm7.com/index.php/news/planning?showall= & start = 3

  I would use these two RAM sticks for example.

  Module 240 pin DDR3-1333 transcend JetRam™ 8 GB High Performance: CL9, layer 6 circuit board

  Transcend JetRam™ High - Performance 8 GB DDR3-1600 240-Pin Module: CL11, 6 layer PCB, ultimate card stability and cross-platform compatibility

  My question is, what is the best for video editing? On the one hand we have 1333 mhz to with a CL of 9. On the other hand, we have RAM 1600 mhz faster, but at a higher CL of 11. Now, I'm not one to get caught up in the technical aspects as it may seem, but I don't understand so I can make decisions, especially when price is a factor. In this case however, they are at the same price...
  

  Well good for video editing, important criteria for RAM is:

  • Never, never crashes - it is very important; choose only RAM sticks (certified QVL) certified provider and do not use unmatched sticks
  • Speed; faster is better - while true also, past at the speed of the RAM, or lowering of the CASE wait cycles (latency) contribute to the speed, but the gains are very low; Faster RAM is hardly perceptible vs CPU speed more fast which is very sensitive (I played with it a lot on some versions overclock and test first with PPBM speed and speed up the processor 5% performance contributes to 5% where speed RAM about 30% can speed up about 1%)

  Google "what is the CASE for the RAM" and one week at self-teaching yourself if you want to even begin to really understand speed RAM! I know enough to know there is a lot to learn about the subject. The good news is that you don't need really to know a lot to build a reliable, excellent for running Adobe products, including the first, Photoshop and After Effects:

  • Use only RAM who has certified the seller of memory for your motherboard; do not assume that if the seller indicates a set 4x8Go of sticks that will work with your motherboard that two sets of such RAM will work with a card mother 8 locations either! (too late to discuss here, but various factors may override the controller memory in the processor itself - factors include voltage RAM, number of sticks, RAM clock, status of CASE of waiting settings speed, voltage of the cpu memory controller and maybe more)
  • Increasing the speed of the RAM always helps if slightly for first speed up to 1600 MHz (for x 79 in any case) and wins the speed of RAM which are still lighter

  Now, back to why both sets of sticks are the same cost. They most likely use the same chips of RAM, which is an important factor for what it costs to build the RAM sticks. While the Asus motherboard you buy allows full customization of many, many, many things, unless you are an extreme Overclocker and plan to spend a few weeks to fine-tune a new simple version you in the bios of motherboard and it say to use XMP settings. This indicates the motherboard, how to set the speed of the RAM and sticks of timings CASE for your particular RAM with the settings the seller intended.

  You really know a lot about what you are doing to set the timings RAM in any way other than the simple choice of XMP settings safely. And, you can easily burn your CPU if you don't know what you're doing and you choose some really bad parameters.

  Kind regards

  Jim

• How often has RAM of Satellite P100-324?

  Hello

  I ' am, thinking about to upgrade my Satellite P100-324 (PSPA6E) 4 GB of RAM, but did not know which one to choose.
  Initially, I have installed memory 533 MHz. My question is - 533 MHz limit for this model?
  or I can install memory 667 MHz and it will work on 667 MHz?

  Also if I install 4 gb - I'll see 3 GB, but will it still runs dual channel mode?

  Thanks for you help in advance.

  Hi guys,.

  This thing with 4GB-> / 3GB is not uncommon. The chipset is just to take a portion of system memory and turns to shared kept. Unfortunately, the manufacturer of the chipset does not tools release or someone set up a function to decrease/increase the shared video memory.

  So, in the case of 4 GB of RAM you have then 1 GB shared video memory.

  And what about dual channel: Yes it will still work on two channels.

  Greetings

• Upgrading RAM on Satellite P100-286

  Hello, I'm looking to upgrade the RAM on my laptop Toshiba Satellite P100-286. I did some research but have resulted in conflicting reports.
  RAM DDR2 RAM right or is it So DIMM DDR2 RAM? According to the Toshiba site, it is not, but when I go to one of the sites Web "Upgrade your Ram" and enter my brand and model, he suggested the So-Dimm type...

  I'm looking for a little clarification. Thank you.

  http://UK.computers.Toshiba-Europe.com/innovation/JSP/SUPPORTSECTION/discontinuedProductPage.do?service=UK&DISC_MODEL=0 & ACTION = PRINT_WITH_BACK & com .broadvision decided .do w = Yes & PRODUCT_ID = 125204

  See this page:
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=28328&ft=m&St=3

  You will find details on the compatible RAM modules:
  You need DDR2 533 MHz (PC2-4200) 200 - PIN SODIMM

  Of course, you could choose another manufacturer like Kingston but I m using Kingston modules in my other laptop and it s ok.

• Questions about TV Tuner Satellite A500/040

  Hi all

  I'm new to the Tuner of TV analog digital hybrid and I'm sorry if my questions seem as stupid.

  I have two questions about the of digital TV Tuner analog integrated hybrid in the Notebook Toshiba Satellite A500/040. My understanding is that the TV tuner hybrid integrated able to decode TV signals high definition and their display on TV via its HDMI port. I wonder if I could watch TV shows on your laptop without connecting to a TV. If so, is the software needed? There are several USB TV tuners for desktops and laptops on the market, A500 hybrid TV tuner works differently these USB TV tuners?

  Thank you

  Young

  > I think I know that the TV tuner hybrid integrated able to decode TV signals high definition and their display on TV via its HDMI port.

  N ° this s tv tuner not a HD!
  It s a digital tuner that provides digital video signal 576i and not 1080i.

  Of course, you can use the HDMI port to connect the laptop to the LCD HDMI port but you will not get the quality video full HD as blueray for example.

  I found this Australian page from Toshiba:
  http://www.MyToshiba.com.au/products/notebooks/satellite/A500/psam3a-04000e

  You will find this passage short text:
  + With tuner TV built-in, you can even watch analog or digital TV everywhere where you travel, while the HDMI ports make connecting high definition on your TV screen and sound system. +

  You can also watch TV on mobile phones display! It's a key reason why the TV tuner built in ;)

• Question about temperature internal Satellite A300 ND1

  Hello

  I have a question about the temperature of the standards it of ok for my laptop and what is the normal temperature and how can I keep it low?

  Thank you.

  Hello

  It's not easy to say what a normal temperature could be.
  The temperature is not always the same and it depends on the use of the laptop.
  Usually, the temperature would increase while gaming or running applications high performance. Why? Because all devices such as the CPU and GPU would focus the heat dissipation and this leads to a higher temperature.

  > How can I keep it low
  Very simply, you can keep still low level, but you can make sure there is enough free space around the laptop to ensure good air circulation.
  Also don t use the laptop on your knees etc in order do not obstruct cooling fans.

  It s also advised to clean the fans from time to time using the jet of compressed air. These sprays are really useful and could buy in the stores of different computers.

• Question about upgrading RAM on Satellite P100-423

  Hello

  can someone reassure me I'll buy the correct RAM and the best for my 2 Satellites. One is the P100-423.
  The other is Satellite Pro P100.

  (1) can I use modules of PC2 5300 DDR2 SO-DIMM 200 pin - 667 Mhz on both computers.
  I want to buy chips to 4 x 1 GB (all the same), so both will have 2 Gig ram PC.

  (2) I saw the bullets above with 533 Mhz, but told me I can use or 667 Mhz. Is this correct?
  667 Mhz would be faster and better is not it?

  (3) some chips are also designated PC2 - 4200 - instead of PC2-5300. Again, I can use either?

  (4) Finally, I always thought that it was better for if adapt to 2 memory chips to live the same size - that is why I want to use 2 x 1 GB chips.
  Yet, I was recommended to mount 1 x 1 and 1 x 2 GB in each pc.
  I know that IE a total of 4 GB is theoretical only 3.25 GB is possible.
  But asymmetric training will offer much greater performance on balance training 2 x 1 GB. ?

  Thank you very much for all the advice offered

  Robert

  With the help of RAM slower is possible. I have another laptop to work with the iso 4200 5300. It works ok.

  However, using the exact speed is better because it gives the best performance. Your system calendar is set on those memories.

  However slower modules, but more RAM still will give you better performance.

  3G seems to be the max for Vista-32. The imbalance is obviously not optimal, but I expect that the performance is better with 2 GB.