question about room no., or order No. Apple!

Similar Questions

• 3 questions about the REGISTRATION of order Web

  To save a jpg file:

  To SAVE TO the WEB: what is the difference between optimized Type & Art Optimized? BOTH GIVE THE SAME SUSPICION OF THE CORRECT TOOLTIP.

  WHAT IS sRGB and why should I use that?

  What is an ICC profile. What would use it?

  Thank you very much!

  Karen,

  Optimized type is for specific optimization of direct Type (unnamed) that contain pointers, especially important in small sizes.

  Optimized art is the work of General vector, including the type indicated.

  You can actually get the best (use) of both at the same time, but in a different way.

• Question about the differences in commands

  Hey guys -.

  I just had a few questions about the differences between orders that seem to perform the same function.  Can you let me know if an order is more preferable to the other and what the difference is.  I would really appreciate it as it I currently practice some INE laboratories and I see that orders change from lab to lab.  Thanks advance!

  1. When you write a static NAT for specific host 1 - is - this important if I understand the 32 subnet?

  EX: static (inside, outside) 1.1.1.1, 2.2.2.2 VS static (inside, outside) 1.1.1.1 2.2.2.2 netmask 255.255.255.255

  2. when I'm setting up a router as a CA server and it is necessary to "export" the key, whatever my method of exporting the key?  If so, in which method call for which solution?

  EX: key export cryptographic rsa ciscox pem URL nvram: cisco VS. exporting key 3des cryptographic ciscox pem 3des rsa terminal cisco

  3. If I have to mark a packet with a DSCP of X value, matter if I use the 'set dscp' VS 'set ip dscp?  If so, what is the difference?

  FXY

  Policy-map X

  class X

  the dscp X value

  VS

  Policy-map X

  class X

  X ip dscp value

  I guess pertaining to 2, if i was speaking in terms of from a cisco router to another cisco router - would terminal be acceptable?
  
  

  Yes, the "Import cryptographic key" command can take a url and also from the terminal entrance. In this terminal case wil is much easier.

  --
  Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
  http://www.Kiva.org/invitedBy/karsteni

• A few questions about in-app apple purchases

  Hello

  I would like to ask you a few questions about in-app purchases from the itunes store.

  I would like to create an application and put this app on the itunes store.

  The application itself will be a 'container' and contain 1 pound. The app will be free.

  So far so good. Now, I want to use shopping app from apple to sell the other books in the application.

  So that they will see a new book in the app and will be able to buy it.

  Now to my question:

  I would like to have books available in the form of separate .swf files (.swf files because I want to add an animation). If people can go to the itunes store and the swf will be downloaded on their device.

  Apple will actually allow this? And if not, anyone know how I could get what I want?

  Yes, that's what it means... Remember that you are not playing in the classic environment of Air, so your application will be just impossible to run any code from any SWF loaded. The reason is obvious: Apple doesn't want that any developer to extend applications or provide additional content without to have approved by Apple / earn money with it.

  In your case, I recommend you to include all the books hard connected by the swcs and then just unlock everytime the user pays.

• A question about the order of COLUMN sqlplus and PL/SQL

  Hello everyone.
  
  
  
  I would like to ask a question about sqlplus command COLUMN that I use in order to define the length of my queries of output columns. So, for example, I run something like:
  

  COLUMN market FORMAT a20

  That is why any column with the name 'the market' will be composed by sqlplus as 20 characters.
  
  Currently I'm working on a PL/SQL script that makes this automatic procedure, in other words, instead of manually write for each column in the above COLUMN order, it uses the DBMS_SQL. He read first as input the name of the table and then inside a loop, it detects the maximum length.
  
  For those interested, here is the Oracle documentation page that I found (example 8)
  http://download.Oracle.com/docs/CD/B19306_01/AppDev.102/b14258/d_sql.htm
  
  If everything worked well enough I managed to recover the maximum of each column in my table length, except that I don't know how to use the COLUMN sqlplus command in my PL/SQL block. I would like to do something like that (it's just a pseudo-code)
  

  FOR colIndex in 1 .. numberOfColumns LOOP
          currentColumnName = getColumnName(tableDescriptionObject, colIndex);
          currentColumnLength = getColumnLength(tableDescriptionObject, colIndex);
          
          COLUMN  currentColumnName FORMAT a -- and here after 'FORMAT a' I have to write currentColumnLenth but I don't know how to proceed.
  
  END LOOP;

  I would like to know is there a command in PL/SQL to define the appropriate column typeset in sqlplus length?
  
  
  Thanks in advance,
  Dariyoosh

  Hi, Dariyoosh,

  Sory, I don't think that there is a simple way to publish SQL * most orders fom PL/SQL.
  PL/SQL runs in the database (back-end); There isn't any direct contact with SQL * more at the front end.

  The best way I know is that PL/SQL script (myfile.sql) with orders of the COLUMN, and then have SQL * more run the script (@myfile).

• Where can I ask a handful of general order questions about Firefox OS as a consumer and get the answers? (a forum or something similar)

  I have about seven questions about Firefox OS. I'm potentially interested in opting for a tablet that works instead of Android or iOS. I couldn't find a place to ask questions like that. Thank you!

  https://support.Mozilla.org/en-us/forums/Firefox-OS-English-Forum

  There is another option.

• About a month ago I posted a question about iMovie and not being able to "share". I solved the problem thanks, so no more emails!

  About a month ago I posted a question about iMovie and not being able to "share". I solved the problem thanks, so no more emails!

  Hi Michael,

  If you want to stop receiving notifications by electronic mail, in the thread, that you have created, then I suggest that you follow the steps below:

  One time connected to the Apple Support communities, visit your mini profile and select manage subscriptions.

  

  Content

  To manage this content, you are currently subscribed and changing your preferences, select the content.

  Select next to see what content you are currently following.  Note that any thread you are responding you subscribe you automatically to this thread.

  You can select to terminate a subscription to a thread.

  

  Learn how to manage your subscriptions

  Take care.

• Messages/questions about this mac

  I have a late 2008 macbook unibody. A few months ago I updated and it worked find. 8g memory on El Capitan. My wife has a macbook 2009 (white) and he has had some problems. It is currently running 10.5.8 (Leopard?). I decided that it would be a good idea to create a profile on my computer because it is higher and actually works. So, I took out his hard drive and used the migration assistant to move its data to a profile on my computer. Everything seemed to work very well and everything going on above.

  Now, I learned today that I can't use Messages. For some reason, I think he's trying to open its version which may have migrated from his computer. I don't know why he would do that and I can't understand how to solve. I can't remove it because it tells me that it is used by OS X and cannot be deleted. I've attached screenshots of the error I get. I have since deleted his user profile to try to remedy, but it did not help. I'm still stuck with all applications and files that came with the migration. I don't know how to remove one of these.

  There is another question. Since I migrated the data, I was no longer able to open "about this mac". Or from the top menu, or the finder by using system information. Really at a loss here.

  Any help would be appreciated.

  

  

  System profiler does not open on my iMac. Apple support communities

  OS X: about system information and System Profiler - Apple Support

• Many questions about the HP 50 g

  I just ordered a HP 50 g graphic calculator! I have a few questions about this so hang on tight! What is the USB connector on the calculator? Mini-USB, micro USB, or is it a connector owner, "custom". Then, it would be possible to connect a keyboard to the HP 50 g by using the USB Port? Is there a program that would make this possible? (I doubt it would work if you plug it..) I have a Mini-USB to female USB 2.0 connector. So I could just plug the keyboard right, provided that the port on the calculator is a Mini-USB Port. If this is not so that I could use my female to female USB adaptor to connect the keyboard.

  Thanks for your help,

  Zekelegge

  Hi!, zekelegge:

  Welcome to Forum!

  The only printer I use, 50G calculators, 48GII, 39GS and 17BII +, as well as many former models, such as the 48 s/SX/G/G + / GX, 38 G, 39 G, 42, 41 C/CV/CX and 28 C/S, is the infrared printer HP 82240 b. If you can use the emulator HP50G, on the PC, the simulator of the printer, you can download, since... http://www.HPCalc.org/details.php?id=7386

  The printer... HP 82240 B

  

  The cable series...

  

  The description... http://www.allenwan.com/hpcalcserialcable/

  The original cable...

  

• A few quick questions about the Satellite P300 - 18 M

  Hello

  I am about to order a Satellite P300 - 18 M and have just a few questions about this:

  (Although these may apply for other similar Satellite/Equium P300.)

  Is the touchpad made by / to use the Alps or Synaptics driver?

  It has the Wireless N network card, is the map made by Intel or Realtec?

  And also, someone has experience with face recognition software to connect?

  If so, does it take a lot of time to initalise?

  Thanks in advance,
  Jack

  Hello

  The P300 - 18M belongs to the PSPCCE series.
  It uses the two touchpad drivers. Synaptics & Alps Electric
  There is an Intel 802.11agn minicards WLan installed

  The face recognition is a nice tool but local to be illuminated and you must take your face the right of the post sometimes it of not very easy

  But if you face is recognized correctly that the connection should work properly

  See you soon

• Question about temperature internal Satellite A300 ND1

  Hello

  I have a question about the temperature of the standards it of ok for my laptop and what is the normal temperature and how can I keep it low?

  Thank you.

  Hello

  It's not easy to say what a normal temperature could be.
  The temperature is not always the same and it depends on the use of the laptop.
  Usually, the temperature would increase while gaming or running applications high performance. Why? Because all devices such as the CPU and GPU would focus the heat dissipation and this leads to a higher temperature.

  > How can I keep it low
  Very simply, you can keep still low level, but you can make sure there is enough free space around the laptop to ensure good air circulation.
  Also don t use the laptop on your knees etc in order do not obstruct cooling fans.

  It s also advised to clean the fans from time to time using the jet of compressed air. These sprays are really useful and could buy in the stores of different computers.

• where to post a question about iTunes on the iPhone?

  I have a question about a problem with iTunes on the iPhone (iOS), but I do not see a 'Community' with this title (or anything close;  I have no idea what "iTunes U" means).

  For lack of a better idea, I just posted to the community "iTunes for Mac", but I don't think that's true.

  Please let me know where I should post to an iTunes on iPhone issue.  Thank you.

  It should probably be posted in the community Using iPhone Apple Support communities. I'll ask a host spend your question in iTunes for Mac, if it has not already been moved.

  EDIT: Just read your message, and I think it's probably better where it is (because you need help syncing your songs via iTunes on your Mac). He should be fine here, but if the moderators believe that he should be somewhere else, they will move for you.

• Satellite U405D - several questions about overheating/disassembly/upgrading etc.

  Hello

  I have several questions about my old one by Satellite U405D-S2910

  1. when it works, after 2-3 hours (I run usually small programs such as safari, msn messenger and bsplayer) CPU gets 85 to 90 C (178-188). When I play age of Empires 2 (come on, its an old game) like 2-3 hours, it stops. What could be the possible reason? Furthermore, let me inform you about the climate of the city I live, 30 c temperature - humidity 25-35% (today).
  PS. CPU is AMD Turion 64 X 2 Dual-Core Mobile Processor. Model RM-74

  2. I'm going to disassemble my laptop in order to clean its cooling units (I think at the rate of overheating is this). It does seem like a desktop computer, so complicated. Ive seen a disassembly not to not (btw, its so difficult to spell dismantling :) I think Im going to do this. What are your suggestions on this subject? experiences could help me?

  3. my laptops is Ram 2x2gb PC5300 DDR2 667 MHz SDRAM memory, I want to replace RAM memory 2x2gb MACH XTREME DDR2 1333 MHZ CL9 NOTEBOOK. Should I do it? Fit my portable, stable work? any suggestions?
  PS. motherboard chipset AMD M780V

  4 - Finally :), should I use OS 64 - bit or 32-bit OS (win7)? what OS would you use if you were me?

  Thank you.

  Hey Buddy,

  1 + 2. I think everything is related to a higher internal temperature and you must clean your laptop using a jet of compressed air. That is why it s not necessary to remove, just blow softly and soon the air through the laptop. You can buy such compressed air which squirts of each computer store I think and it takes only 5 minutes.
  You can find a useful article about this here:

  3. in my opinion he should forget this update! The speed of the RAM is related to the FSB of the CPU and as much as I know about Satellite U405D it s 667 MHz so it s already the RAM faster than you can have. Save your money and buy a larger HARD drive or in the best case a SSD that can really improve the performance!

  4. in my view, the answer is clear: Windows 7 64-bit.
  Only a 64-bit OS supports full 4 GB of RAM. ;)

• A few questions about the Satellite A100 PSAANE

  Hi friends,

  I have a Toshiba Satellite A 100 - PSAANE with Vista Home Basic preinstalled in it.
  Now, I have a few questions... I mention below: -.

  (1) if I want to format my laptop, I need a CD to install for Vista Home basic... then I don't have this Toshiba CD when I bought the laptop. So how do? question: How can I format it?

  (2) can I change my Vista Home Basic to windows XP? I think it's much faster than this one. is it advisable?

  (3) I have a GB of RAM in the laptop. Increase the RAM? I think that my laptop has become to slow down. is it advisable?

  (4) and on my screen, everytime I try to change my profile screen to windows Classic view, my screen begins to blink. and after a while, the screen turns off. So I can't change that. I put the color scheme of windows vista only. What to do about that?

  Please help me friends. Thanks in advance.

  Kind regards
  Perkins

  Hello

  Here, a few questions about the number:

  (1) usually, you should get the Vista Toshiba Recovery DVD. If you didn t receive this DVD then you can order it here https://backupmedia.toshiba.eu/landing.aspx or you could install the disc of Microsoft Vista.

  (2) of course, you can do this. I think that Win XP drivers can be downloaded from the Toshiba driver page.

  (3) Yes, you can upgrade the RAM. For more information, see your manual or search on this forum for similar topics

  (4) maybe it s associated with the graphics driver. Check if you can update. I would recommend additional check if you are using the latest version of the BIOS

  Welcome them

• I have a question about the time machine. I recently updated my Quicken 2015 and there was something wrong with the update. Can I go back in just the Quicken file and restore it until I downloaded the update do I have to restore the entire

  I have a question about the time machine. I recently updated my Quicken 2015 and there was something wrong with the update. Can I come back in all the Quicken file and restore from time Machine before I downloaded the update to do, I need to restore the entire computer?

  Yes, you can just restore this file or application. Use Time Machine to back up or restore your Mac - Apple Support