Question about support export using predefined option 'Match Source - broadband'

Similar Questions

• Questions about the export of PDF with India CS5.5

  Hey all,.

  A few questions about the export to PDF of the most recent version of India.

  First of all, I noticed it seems to take much more time to access a PDF file. Any suggestions about how to speed up the process? It took 8 minutes to generate a PDF low resolution (for printing) of a document of 24pp with placed images and vector graphics. Wow, that's a long wait, especially for evidence.

  Second, the background task... If I get it will make this PDF of 8 minutes and then more work on the document, which is exactly in the PDF? Usually, I have save before making a PDF or printing. Thus, the latest version is saved which will be in the PDF?

  (Either incidentally, this ability to work on the doc while generating a PDF file seems kind of weird. Generally, we do a PDF for proofing, or even for printing, when any changes have been made and that everything is "final". Therefore, I see no advantage in being able to work on my document while it is making a PDF file, I am probably once your revisions for the moment. I must say that I like the progress bar that you get when you perform an interactive PDF, as you know that you can not work on the document when it is on the screen...)

  Thank you as always.

  Good, people. Wanted to just follow this and post my results. It turns out that the problem is somewhere in the Illustrator file. I never had the time to guess what work plan was the culprit. Other India files PDF files is transparent and not a lot of time.

  No resolution, unfortunately, just good to know that it is not all India files on my system. Phew!

  THANK YOU for your advice.

• Questions about support

  Dear community of cloud!

  I have a few questions about the service of adobe support.

  First of all, I would ask which includes the support service. I am also curious about the length of the reaction and the way they treat the problem can occur. Receive problem reports directly into the program I use, or do I have to write a separate message in a service address or Skype etc are decent ways to communicate with them?

  Thanks in advance for your answer!

  Service varies down the line insofar as this support is provided and when/how quickly it is provided.  Some people are very satisfied with the support that they get and others are not.  These user forums are one of the support options and usually you will get a response fairly quickly, and if you provide a detailed problem statement you can usually get a solution.  If a solution is to contact Adobe customer service, there is not much anyone can do here in the forums except to the provide information to contact. To contact Adobe Customer Support...

  To the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )

• Question about support for LabVIEW DLLS and Unicode

  Hello

  I have a question about LabVIEW and DLL functions calls.

  I use a DLL (sorry, I can't share it) that was written in C. It was written to support Unicode and non-Unicode function calls.

  The Unicode function is valid, then FunctionNameW is called if FunctionNameA is called.

  I am building a few VI to access the library. I have the regular functions of FunctionNameA work.

  My question is, does LabVIEW support versions of function FunctionNameW Unicode, and if so is it necessary Although LabVIEW is already working with the standard function call?

  Am I being redundant or what should I build in Unicode support?

  The first time I tried to test the Unicode functions, I had an error, and I guess this is a system setting.

  Thank you for your time in advance.

  DB_IQ wrote:

  I don't think I have TO implement the Unicode, but I want if I can.

  For what I do, I think almost it is not serious. But I wanted to know if it could be used.

  The short answer is "Yes, you can do it."  However, it may open a new Pandora's box.  If you're not careful, problems and complications that can still spread to other projects that are not using Unicode!  It is better not to summon this monster unless there is absolutely no other way to do the job.

• Question about the possible use of MSVC 2008 Express as an external compiler CVI 9.0

  I was looking for these messages looking for information on the use of the ICB with external compilers, especially from MSVC 2008, and I came across this ad are about 4 months:

  "CVI 9.0 and MSVC 2008 express.

  The title of this announcement means that the freely downloadable 'express' version of MSVC can be used with CVI 9.0, but the body of the message is not in the details.  But I would really like to know if this is possible, and I'm guessing there are others here who could be very interested as well.  Page 8 of the CVI 9.0 release notes does not indicate that the Express version is supported, which makes sense.  I say this because I always thought that "express" versions of the MSVC were only to create .NET applications (C + c++ / CLI) and applications not native to Windows.  Or does change with the release of MSVC 2008 Express?

  There is no hurry to answer...

  JB

  If you have a CVI 9.0 FDS(I'm not sure about the BDS)

  Select Options/Build Options

  Select the Select button to the right of 'compiler active'.

  Click 'new' to create a new configuration of external compiler

  Select MSVC 9.0 as a model.

  Choose a configuration name (what you choose to CVI) and a destination file (where the external compiler settings will be stored).

  Click OK

  After that, you can easily select the optimizing level and the level of warnings that you need through the "Edit" in the box "compile to realease configuration.

  Kind regards

  Nicolas

• A few Questions about the export of Animations Formats in and interactive PDF

  Hi people

  According to my previous ramblings, I just go CS5.5 and am very interested in the animation and the side of interactive documents of things.

  I created a document as a test that has a video (mp4) and a slideshow (using the buttons to the previous step and the next step of stacked images).

  I can export it as a swf file, all perfectly, but the first few people I sent there do not have flash player.  I thought that most of the people would be able to open it but apparently not.  Is there a better format for export?

  I tried to export as an interactive pdf, but my slide show button does not work then.  I don't quite see the element of interaction of one interactive pdf other than being able to put in a video (which I have not yet tried).  Im sure someone can enlighten me!

  Any help?  Are swf is intended primarily for Web sites where people can see it this way rather than be sent by electronic mail?

  See you soon

  Animations and slideshow features are available only in a SWF file, which, as you have discovered, requires Flash.

  Workaround: select only the slideshow and the buttons that are associated and export to SWF format using the option on the export dialog box. Then replace the SWF file in InDesign. Use the media panel to create an image of the poster. Can export to PDF.

  Sovereign wealth funds expect to be read in most web browsers.

• Question about Support for creative cloud

  I think I have about 20 days left of the original support provided with my subscription to creative cloud. How to use this support? I do not think that I talked to support others in the product help questions yet. I also need to know what kind of support I should buy after that is exhausted. I am a designer who started to build websites with Muse. I also try to understand the Business Catalyst accommodation. "Thank you", in advance!

  You should post your questions in the forum Business Catalyst here http://forums.adobe.com/community/business_catalyst. They will be able to help you.

• Satellite R830: Question about power for battery usage options

  Hello world

  I recently bought a R830-182 (detailed configuration below).
  I had to update Windows 7 Home Premium Ultimate because I need to use it on my university network.

  My University gives us an upgrade to windows 7 ultimate edition, but I had to do a clean install (from inside Windows 7 Home Edition, copy the upgrade you can do).
  The key, with what they gave me would not work with the Windows anytime upgrade utility.

  I think that I have installed everything that I need to get the laptop to work, but I'm not sure of the configuration of the battery. The cooling fan seems to be always on, and when the battery reaches 100% charge that he also said that he is in charge.

  My questions are:
  1. is there another program I have to install to allow the computer manage settings of the battery?
  2. do I need to change some settings in the power options?
  3 should. what settings I change in power options?

  Any help would be welcome
  Kind regards
  Alex

  Toshiba Satellite R830-182
  Install Windows 7 Ultimate, clean (because my University product key does not work with the windows anytime upgrade)

  Toshiba programs installed
  * EcoUtility
  * HDD Protection
  * Resolution + Plugin
  * Sleep utility
  Value of additional package

  Programs running in the taskbar
  * Dropbox
  * TwoFingerScroll
  * Avast antivirus Home edition
  * Intel HD Graphics
  * Synaptics pointing device
  * The Bluetooth Manager
  * Drive optical autolock
  * EcoUtility
  * HDD Protection
  * Programs standard windows 7, Center of Action, battery, speakers, wifi.

  Hi mate

  I think this Toshiba document should help you get the best power settings

  + How to manage Windows 7 power management features.
  http://APS2.toshiba-tro.de/KB0/HTD12017W0001R01.htm

  Usually if the battery is fully charged, the battery indicator should move from orange to blue (or green).
  If it does not then it means that the battery still in charge.

• Question about ESXi 5 use cases

  Hello

  My name is David Baldock, and one of the IT guys here at work suggested that with the help of VMware ESXi 5 could allows me to accomplish what I need to do on my system, without having to close and restart between Linux and Windows 7 for different tasks.

  I recently upgraded my PC to a processor Intel Core i7 - 3930K on a motherboard ASUS X 79 Sabertooth (VT - d support in BIOS) with 32 GB memory DDR3-2133 2 NIC and an AMD HD graphics 7970.  While I have not a card SCSI or SAS in there, I have a 256GB SSD OCZ Vertex - 4 2 x 120 GB OCZ Vertex 3 Max - SSD IOP, a 600 GB 10 K RPM Raptor H/D and a Blu - Ray SATA writer.  The SSD & H/D is on SATA 6 Gb/s ports, and the Blu - Ray is on a SATA 3 GB/s port.

  I normally run Linux on my PC, but the photo post-processing software that I use (DxO Optics Pro 7.5) works on Windows 7 and using OpenCL to take advantage of the computing power of 7970 HD.

  I understand that the VMware ESXi 5 installs as a hypervisor directly on the hardware and then allows multiple VMs to be run simultaneously on the system.

  Read on ESXi 5 (see courses and link below), I don't know if I should add a SCSI or SAS card, or if I can install and run VMware and OS on the SSD Client, using the large Raptor H/D to common storage?  There is a 2 to drive Iomega NAS connected to my network (and I have several external drives with SATA or USB-3 interfaces), with future plans to add in addition to stand-alone drives NAS or a big NAS RAID Array.

  The main question I have is if the material resources are dynamically reassignables between Virtual Machines?  For example, if I'm normally running Linux, then I would most of the CPU cores and the video card to "assign" to this virtual machine - but when I need to process the photos, I want to be able to boot Windows 7 and "reallocation" most of the hearts of processor and Passthrough the 7970 HD for this virtual machine to provide the computing power for the DxO Optics Pro.

  Is it possible to use VMware ESXi like that, or I'm better stop the PC and reboot between operating systems?

  Thanks for your ideas and suggestions.

  
  Take care
  David Baldock

  =====
  Quote from 'ESXi hardware requirements:

  For Serial ATA (SATA), a drive connected through taken SAS controllers supported or supported integrated SATA controllers. SATA drives will be considered remote, non-local. These discs will not serve as a partition to scrape by default because they are too far away.

  Note
  You cannot connect a SATA CD-ROM device on a virtual machine on a host ESXi 5.0. To use the SATA CD-ROM device, you must use the IDE emulation mode.

  Note
  ESXi does not support using SATA internal disks local to the host server to create VMFS stores of data that is shared between multiple ESXi hosts.

  =====
  Citation of "VMware Articles 10/05/11 06:51:
  VROOM! : GPGPU Computing in a VM

  Regularly on the forums I see people asking if GPGPU computing is supported by ESX, prompting me to write a brief message on the subject:

  YES! VMware ESX supports GPGPU computing. Applications can access the GPGPU CUDA or OpenCL in exactly in the same way that when running in native mode - no changes are necessary for the application.

  =====
  http://communities.VMware.com/community/VMTN/CTO/high-performance/blog/2011/11/21/SC11-virtualized-GPU-compute

  =====

  Install ESXi 5u1 on the system, then upward, setting it up as a host server. Then use another computer (Yes, you need to have another system actually configure/use the host) to configure passthrough and others. I don't know if it's available in the free version, so you don't have to try it and see. Be aware that you will be able to use the video adapter on a virtual machine single at some point.

  I just activate DirectPath of e/s on my own host (a nVidia Quadro NVS 290) video card. It requires a restart until it's available, however.

  So, if this works (for you too) enable you, reboot the host and then attach one of the virtual machine to the video card to use. You will then be able to use your other system to open a console window in this VM (from the Client vSphere connect directly on the host server) to do what you want / need.

• Question about support of Ubuntu host platforms

  According to the user's guide, the latest version of vmware server-supported Ubuntu is 8.04, which becomes a bit long in the tooth.

  -Are there a plan in the near future to support a newer version of ubuntu?

  -people run vmware server 2 on the latest versions of ubuntu without any significant problems?

  Hello

  You must run vmware server 2 on Ubuntu 8.04 without problems. It works very well because it is fully supported.

  Anyway people running vmware server 2 on Ubuntu 9.04 and 9.10. It is not supported and sometimes some questions (weird), but it should work.

  If you want to install vmware server on ubuntu 9.04 or 9.10, I recommend you visit the "VMWare server 2 install problems" section in this post.

  Hope this helps

  Best wishes / Saludos.

  Pablo

  Please consider providing any useful answer. Thank you!! - Por favor considered premiar las useful responses. ¡¡MUCHAS gracias!

  Virtually noob blog

• Questions about the export of the files (tab out, location of export file and preferred Format)

  Hello

  I exported just my first movie PrPro test.

  Three questions.

  1. I'm a little worried because before I exported it, no picture was visible in the tab out of the export settings panel.  I wanted to use to check beforehand that I had no black bars, but all that I had was a black screen, as seen immediately below:

  

  2. my sequence has been properly exported.  But where it has been exported to?  How can I learn where?

  3. Finally, I would like to present my film 100 trees, which hopefully completed by April 19, a handful of middle and high level film festivals.  I turned it in 1920 x 1080 24 p.  What export format would probably work for the largest percentage of film festivals?

  Thank you!

  Matt Dubuque

  Matt,

  I can't comment on # 2 and # 3.

  2.) exported the file will be located where you chose for the destination folder. If you did not note that, just go through the process to redo the export, but note the destination folder (should be a sticky, so that it won't change until you change), but do not go through the complete export - cancel just, once you see the destination folder. Otherwise, you can search your system for the name of the sequence, or anything that chose you as the name of the export file.

  3.) there is not one answer for this. I communicate with each festival and ask for them plug complete standard for presentations. They all have the same maybe, but you may need to make several exports, one for each festival. Let them tell you what they want. When you get their spec sheets, if you have any questions, come back to this thread and post their requirements, and someone will be able to help interpret the requirements.

  Good luck and good luck to the festivals!

  Hunt

• Question about the installation of XP options

  Hello

  I have a brand new M50, I really like. However I didn't know when I bought that it didn t equipped with XP discs. I saw the little green book XP s user and assume that the disc was inside.
  Now, I want to install "backup", which does not automatically include the home edition, but is contained on the disk. Is it possible to install this option?

  Thanks for the replies!
  David

  Hi David,

  You are quite right in what Windows XP Edition does not include the usefulness of "Backup" as standard family.

  However, check if you have a folder called "Valueadd" on your system. The inside should be another folder called "MSFT" and inside that should be setup NTBACKUP. This will allow you to install the Microsoft Backup utility.

  HTH

• Question about the photo (using the folders and Photos app)

  Hello

  I am new on the app Photos - aperture used briefly but never really liked. I used to manage/sort all my photos with simple folders on the hard drive. Now, I would like to move the direction of the Photos app.

  A few questions:

  1.) if I add images, are they duplicated on my hard drive when I import them from Photos?

  2.) how to delete images permanently? I need to do a cleanup, which is easier in the Photos. If I delete the images here (and also delete the "recently deleted" album), why they remain in their original on my hard drive folder?

  Any help is appreciated - thanks!

  1 - Yes by default which is highly recommended, as was the case with iPhoto you then delete the photo source since it is safe in the library

  2 - pictures works just like iPhoto - nothing outside the library is not affected by what you do in the application - see 1

  LN

• Two questions about the export to EPUB...

  I have a document I want to set up as an epub.  This is a book for children, so I need to do two things that it does not currently when I export.

  1. I need the text remains on the image associated with it.  Is there a way to anchor the text to an image, so it never leaves this image, even when the text resizes?

  2. There are some sounds and animations that are currently available on each page.  Those used to EPUB, because, so far, they disappear when I export in this format?

  Thanks for your help.

  Kevin

  1. the text and the image of the Group and make then anchored object.

  2. don't know what to do with that with CS5, but you should be aware that the use of audio and video in epub is very limited at present.

  For the work of the Epub, you're much better upgrade to CS5.5. In the meantime, I suggest a copy of the excellent Epub directly from Liz Castro to the Point of purchase: http://amzn.to/rqNwkp

  and check videos of Anne-Marie Concepcion on Lynda.com. You can get a free one week trial using this link: http://bit.ly/fcGpiI

  Bob

• Two Questions about the export in PDF format

  When I export my document of a book in PDF format, I met two problems, I was still not able to understand.

  1. one is that bookmarks are not binding when I click on them. I tried a number of different recording options.

  Document book pop up menu I tried to export both print and interactive and the next document window options, I tried selection and de-selection of almost everything, but still no change.

  2. the second Issos is I want the PDF book to open in a different display size, but no matter what setting I chose when exporting, PDF file always opens the same size: great! The reader has to zoom in to get a good read size. Is it possible to have the PDF open in different size repel?

  Yes