question about technique

Similar Questions

• EBS 12.1.3: a few questions about cloning

  Hello
  
  We have EBS 12.1.3 on AIX 7.1.
  
  A few questions about the cloning of level shared environment of application layer non-shared application environment. We followed 'Cloning Oracle Applications V12 with rapid Clone [ID 406982.1]'
  
  Environment (shared application layer) source:
  -Two nodes in the active application and LBS
  -A database of active and a passive database configuration with Oracle Data Guard.
  -Terminate SSL at the load balancer
  -Updated CFP implementation
  
  Environment target (level app not shared):
  -A single node of the application active
  -One data node active
  -Without SSL
  -No PCP
  
  After the cloning was completed, we noticed the following problems in the target system:
  
  (1) home page is not available because application $CONTEXT_FILE layer always contains the endpoint "https" and ssl settings.
  
  Workaround solution:
  
  Change (with text editor) layer Application $CONTEXT_FILE as follows.
  < webentryurlprotocol oa_var = "s_webentryurlprotocol" custom = "yes" > http < / webentryurlprotocol >
  < sslterminator oa_var = "s_enable_sslterminator" > # < / sslterminator >
  < login_page = "s_login_page" custom = 'yes' oa_var > http://myhost.mydomain.com:8000/OA_HTML/AppsLogin < / login_page >
  < externURL oa_var = "s_external_url" custom = "yes" > http://myhost.mydomain.com:8000 < / externURL >
  
  Run the automatic configuration service and application layer.
  
  Is there a better solution and supported for this?
  
  (2) simultaneous managers do not work properly, because they still have old names of node (used in the CFP in the source system). The solution is used:
  
  1. connect to the EBS GUI web and delete all nodes of all concurrent managers.
  2 shutdown application layer. Check that all concurrent managers have been extinguished. If not, kill the process manually
  3. as a user apps run cmclean.sql
  4 restart the application layer
  
  Is there a better solution for this?
  
  (3) database ARCHIVELOG mode nonarchivelog mode changes in the target system. Is anyway to prevent this?
  
  (4) in addition, we would like to make a full clone (app + db levels) of production without closing the application. Is this possible? What would be the best documents to describe it? In Production, we have Oracle Data Guard physical standby installation as per "Note technique Oracle: Business Continuity for Oracle E-Business release 12 Using Oracle 11g Physical Standby Database [1070033.1 ID]. This can be used when executing a clone of warm for the database, right? What application layer? The steps in 406982.1 include AutoConfig in what application level should be running down. Must the application be broken when running "to maintain the Snapshot information?"
  
  (5) one last question (not related to cloning). Oracle Enterprise Manager console webUI has recently stopped working in IE8. For example, https://myhost.mydomain.com:5501 / em gives "cannot display the Page. It was working properly last week. In Firefox, the same link works fine. Any ideas how to solve this problem?
  
  Thanks for your replies in advance.
  
  BR,
  TH

  (1) home page is not available because application $CONTEXT_FILE layer always contains the endpoint "https" and ssl settings.

  Workaround solution:

  Change (with text editor) layer Application $CONTEXT_FILE as follows.
  http
  #
  http://myhost.mydomain.com:8000/OA_HTML/AppsLogin
  http://myhost.mydomain.com:8000

  Run the automatic configuration service and application layer.

  Is there a better solution and supported for this?

  No, you must modify the context manually and run the automatic configuration.

  (2) simultaneous managers do not work properly, because they still have old names of node (used in the CFP in the source system). The solution is used:

  1. connect to the EBS GUI web and delete all nodes of all concurrent managers.
  2 shutdown application layer. Check that all concurrent managers have been extinguished. If not, kill the process manually
  3. as a user apps run cmclean.sql
  4 restart the application layer

  Is there a better solution for this?

  You follow the best approach. You could update the details of the server node if you wish.

  (3) database ARCHIVELOG mode nonarchivelog mode changes in the target system. Is anyway to prevent this?

  By default, the quick Clone will create the target in noarchivelog mode database.

  (4) in addition, we would like to make a full clone (app + db levels) of production without closing the application. Is this possible? What would be the best documents to describe it? In Production, we have Oracle Data Guard physical standby installation as per "Note technique Oracle: Business Continuity for Oracle E-Business release 12 Using Oracle 11g Physical Standby Database [1070033.1 ID]. This can be used when executing a clone of warm for the database, right?

  Fix.

  What application layer? The steps in 406982.1 include AutoConfig in what application level should be running down. Must the application be broken when running "to maintain the Snapshot information?"

  You can copy the files from the application tier node, while demand is rising. And, there is no need to stop the application to run "to maintain the Snapshot information."

  (5) one last question (not related to cloning). Oracle Enterprise Manager console webUI has recently stopped working in IE8. For example, https://myhost.mydomain.com:5501 / em gives "cannot display the Page. It was working properly last week. In Firefox, the same link works fine. Any ideas how to solve this problem?

  If it works from a browser, then it should not be a problem of EM. Have you tried another client and see if it works? Have you changed a setting in your Internet Explorer browser? Please make sure you add the URL of the EM to the list of trusted sites.

  Thank you
  Hussein

• A question about type

  Okay, at the risk of exposing me like a complete jerk, I need to ask a question about type.

  I use Fireworks CS4 to design a website of 40 to 50 pages. Most of the site is composed of ten stories, each taking two to five pages of the site. I use ghraphic and pictures to break up the grey type and illustrate the words. I anticipate using 14pt Arial for my policy. The text will be displayed on a 'unique' (that is to say, not repetitive) texture.

  I put on my pages with photos and other graphics, and I glued the type of original stories around the images. (I don't use Lorem ipsum for text space booked because I wanted an accurate measure of the screw-the-page notice words.) In other words, I wanted to be sure that everything fit and don't let no troublesome space at the end).

  I know that I do not export the type with images in Dreamweaver. I'll remove the text in Fireworks when I export, then paste it in Dreamweaver so that the pages appear as I have originally designed the.

  However, my question is this: If a reader opens one of my pages with his default computer to, say, 12pt Verdana, if it screws up the layout of my page? As I said above, I have designed the pages at Arial 14 pt. If the type will flip off my pages - or type will inches less on a page - if the Player browser is set to a different font size or point? If Yes, what can I do to make my pages (or contraction) to adjust the reader his reading preferences?

  Thanks again for your help. Of course happy that I do not use my real name on it.

  When you write the HTML code, you place the images next to the paragraphs they are associated if the police or the window changes size, then the whole of the document is redéroule, but logically, everything to its planned place. This can be frustrating for people who are used to define exactly where the images appear with respect to the text and even kerning and spacing to make a line "so." You will have awkward gaps somewhere, let it go... let the way you free from this concern.

  Everything is in a box, however. In this box, you can put images repetitive or expandable. So yes, you can put a background behind the text, no repetitive image on each of your pages and you should be able to set the box so that duplication of the background image will not appear if it is larger than the active area. (I think it would be in the CSS overflow divs property... you'd have to check).

  Here are some tutorials using broad, non-repetitive background images for the page. You could adapt the technique to a content div:

  http://Line25.com/tutorials/basic-Web-page-background-techniques-with-CSS (scroll down)

  http://www.WebDesignerWall.com/tutorials/how-to-CSS-large-background/

  On the other hand, however, lines of text that are more than 2 to 2.5 wide alphabets are difficult to analyze. If your site is intended to be text-heavy, you might be better off with a fixed width for your text box.

  I think that the comment the blogger relates using Fireworks Slicing page to export HTML code, which gives you a fixed design, based on a table. The HTML code, you can export FW is not for live sites. It's just for prototyping. It is better to use CSS for layout, rather than tables, because the code is easier to maintain. I came across this interesting tutorial (the author uses Photoshop, but any graphic program works if you want to follow along):

  http://NET.tutsplus.com/tutorials/HTML-CSS-techniques/design-and-code-your-first-website-i n-easy-to-understand-steps.

  (I hope this helps you!)

• Where can I ask a handful of general order questions about Firefox OS as a consumer and get the answers? (a forum or something similar)

  I have about seven questions about Firefox OS. I'm potentially interested in opting for a tablet that works instead of Android or iOS. I couldn't find a place to ask questions like that. Thank you!

  https://support.Mozilla.org/en-us/forums/Firefox-OS-English-Forum

  There is another option.

• About a month ago I posted a question about iMovie and not being able to "share". I solved the problem thanks, so no more emails!

  About a month ago I posted a question about iMovie and not being able to "share". I solved the problem thanks, so no more emails!

  Hi Michael,

  If you want to stop receiving notifications by electronic mail, in the thread, that you have created, then I suggest that you follow the steps below:

  One time connected to the Apple Support communities, visit your mini profile and select manage subscriptions.

  

  Content

  To manage this content, you are currently subscribed and changing your preferences, select the content.

  Select next to see what content you are currently following.  Note that any thread you are responding you subscribe you automatically to this thread.

  You can select to terminate a subscription to a thread.

  

  Learn how to manage your subscriptions

  Take care.

• Where and how do I ask questions about Email?

  The Commission opening thingy is complicated, I have trouble finding my way around it.  I don't know where or how questions about email.  Is there an easier way than trawling through all these icons?  Like a list or something - as you get on all other forums on the internet?

  It would be a good starting point: Mac mini

  Or the appropriate under MAC Os and system software section.

  You might also find this useful: find answers and new questions

• Many questions about the HP 50 g

  I just ordered a HP 50 g graphic calculator! I have a few questions about this so hang on tight! What is the USB connector on the calculator? Mini-USB, micro USB, or is it a connector owner, "custom". Then, it would be possible to connect a keyboard to the HP 50 g by using the USB Port? Is there a program that would make this possible? (I doubt it would work if you plug it..) I have a Mini-USB to female USB 2.0 connector. So I could just plug the keyboard right, provided that the port on the calculator is a Mini-USB Port. If this is not so that I could use my female to female USB adaptor to connect the keyboard.

  Thanks for your help,

  Zekelegge

  Hi!, zekelegge:

  Welcome to Forum!

  The only printer I use, 50G calculators, 48GII, 39GS and 17BII +, as well as many former models, such as the 48 s/SX/G/G + / GX, 38 G, 39 G, 42, 41 C/CV/CX and 28 C/S, is the infrared printer HP 82240 b. If you can use the emulator HP50G, on the PC, the simulator of the printer, you can download, since... http://www.HPCalc.org/details.php?id=7386

  The printer... HP 82240 B

  

  The cable series...

  

  The description... http://www.allenwan.com/hpcalcserialcable/

  The original cable...

  

• Question about warranty after exchanges of RAM on Satellite module series

  Hello together,

  I have a question about the warranty. My laptop is 5 months old and now I want to improve it with more RAM. I want to do it myself, and now I'm wondering if the warranty will be getting hurt.
  Thanks in advance for your answers.

  Concerning

  TiG3r

  For new models of laptops the RAM upgrade described in s operating manuals. It is public act and it shows the owner of the notebook how do RAM upgrade only.

  If Toshiba offers something like this he won't have the negative influence of valid warranty.
  Buy a compatible module and RAM upgrade.

  Bye and good luck!

• A few quick questions about the Satellite P300 - 18 M

  Hello

  I am about to order a Satellite P300 - 18 M and have just a few questions about this:

  (Although these may apply for other similar Satellite/Equium P300.)

  Is the touchpad made by / to use the Alps or Synaptics driver?

  It has the Wireless N network card, is the map made by Intel or Realtec?

  And also, someone has experience with face recognition software to connect?

  If so, does it take a lot of time to initalise?

  Thanks in advance,
  Jack

  Hello

  The P300 - 18M belongs to the PSPCCE series.
  It uses the two touchpad drivers. Synaptics & Alps Electric
  There is an Intel 802.11agn minicards WLan installed

  The face recognition is a nice tool but local to be illuminated and you must take your face the right of the post sometimes it of not very easy

  But if you face is recognized correctly that the connection should work properly

  See you soon

• Questions about nb200

  I recently bought a mini nb200 with windows 7 and I have a few questions about it. How can you set up your email, I was willing to put up with Outlook Express, but I don't know if I can. Also, is there a way to get a paper copy of the user manual?

  You can download and install a new e-mail program when you download Windows Live via Microsoft Update. You can select the components of Windows Live, you want to include by checking a box for each you want. I installed all the. Or you can use Outlook, if you have Microsoft Office and you want to install it.

• A few questions about the difference between the Satellite P70, L70, S70

  Hello, I have a lot of questions about the P70, L70, S70 series that come with a 1920 x 1080 panel.

  (1) what are the differences between the L70 and S70 series? With the exception of the RAM and HARD drive capacity, books seem pretty identical.

  (2) P70, L70, S70 doesn't support a 2nd HARD drive or it's just the P70 series that support?

  (3) all the three (P70, L70, S70 series) come with the same TFT panels?

  (4) of the above series, which supports mSata?

  (5) all the model of each series are delivered with support from mSata? For example, it could be that L70 - a - 13 m supports mSata is not the case of the L70-a-146?

  (6) all the foregoing, are delivered with a S - ATA II or III S - ATA interface?

  (7) who is the best of these series listed? I'm trying to understand what makes the big difference of S70 to P70 except for the envelope for example.

  Thank you in advance.

  > (1) what are the differences between the series L70 and S70? With the exception of the RAM and HARD drive capacity, books seem pretty identical.

  What models Sat L70 and S70 do you mean exactly? There are different L70-xxx-xxx and S70 models on the market that supports different hardware specifications.

  (> S70 2) P70, L70, support a 2nd drive HARD or is - it just the series P70 that support?
  As you can see in this [Sam P70 HDD replacement document, | http://aps2.toshiba-tro.de/kb0/CRU3903II0000R01.htm] the P70 series supports the 2nd drive Bay HARD, BUT even if there is a 2nd HARD drive Bay, this does not mean that you can use the 2nd HARD drive. In the case where the 2nd HARD drive Bay are equipped with HARD drive connector, you can use the 2nd HARD drive

  I also found the [Sam L70/S70 HDD replacement | http://aps2.toshiba-tro.de/kb0/CRU3703HG0000R01.htm] the document on the Toshiba page and there I see this 2nd HARD drive Bay is not available

  (> 3) all three (P70, L70, S70 series) come with the same TFT panels?
  See point 1). Different P70, L70, S70 models were equipped with different material parts.

  (> 4) of the series above, which takes in charge mSata?
  As far as I know that some P70 models are equipped with an mSATA SSD of 256 GB.

  (> 5) do all the model of each series are delivered with support mSata? For example, it could be that L70 - a - 13 m supports mSata is not the case of the L70-a-146?
  See point 4) not all models supports the same hardware specifications

  (> 6) all of the above, come with a S - ATA II or III S - ATA interface?
  I don t think that SATA III is supported. I guess it would be SATA II

  (> 7) which is the best of these series listed? I'm trying to understand what makes the big difference of S70 to P70 except for the envelope for example.
  Not easy to answer because there are too many models released in Europea.
  And not all models are available in each country. So I guess you will have to look for the models that have been released in your country.

• Satellite L650-11R - a few questions about this

  Hello there :-)

  I have a few questions about my new L650.

  I've never had Toshiba notebook before so I apologize if some of these "quirks" are actually quite normal on this laptop. I really want to hear the views of other users L650.

  1)
  First of all, by the time I turned it on I saw gradient thin (1-2 mm) along the right edge of the screen that goes from the bottom up. Maybe "degraded" isn't the right word, but it seems that since two or three pixels are kind of discoloration or lose brightness/sharpness to the edge along the straight bezel. It is not really that visible, looks like the colors are desaturated a bit here or brightness is a bit lacking. He can be seen everywhere (bios or no color in Windows, but better in the lighter background).
  The left side (or other) seems ok, all this along the right edge is somewhat suspicious. If one can compare? I don't know if it's something to worry about or is just supposed to be like that.

  2)
  The other thing I noticed heating of the processor (Intel i3 330M) and GPU (ATi Mobility Radeon 5650). It's pretty hot here right now (I would say that the temperature is around 28 degrees Celsius when using cell phones). He is sitting on the hard surface (table) and nothing is blocking the vents.
  However, at "rest" (surf the web & regular light stuff), average CPU temp hovers around 58 ° C. It usually goes from 45 to 62 in just a few minutes after starting, and then I can hear and see (Toshiba PC Health Monitor) evacuate the kicks in. Temp goes back to 50 +, event stops and then the temp rises to 60 + until the vent is used again.
  During load full (Prime95 or some games), CPU is going all the way up to 75 degrees (the highest being 77). Fan runs at 75 to 77% during this time, never go faster.

  GPU idling is usually around 5 degrees above temp CPU (62-65). During full load (for example. Benchmark of Far Cry 2), I see a lot of stuttering with the latest drivers Catalyst and DX10 (not sure if the stuttering has something to do with heat), otherwise it is ok (no artifacts or anything like that). Temp of GPU during the loading goes up to 74-75, fan speed is locked at 30%, the frequency of the heart 5650 is 450 MHz. left side of the laptop (vent and below) is pretty hot, while the keyboard is warm (or slightly warmer who who).

  These time seems correct and safe in the long term? I'd rather events works all the time (they aren't really very strong) and keeping time less than 50, but there are just wishful pious bios control events and I can't control not the bios. :-)

  3)
  This is just General related products. :-)
  Official specifications of Toshiba L650 say ATi 5650 (between other low range GPU), but I saw a few specifications calling for there 5730 (same model 11R). Is there really a Satellite L650 with ATi 5730 GPU models?

  Sorry for the long post, I tried to include the best possible description that I could do. :-)

  Thank you in advance.

  Thanks for the additional info!

• Hi there, I have a question about storage, even if I have 2, 53GB, storage watch 21, 99GB usage, why this difference? I use an iMac 2009, thank you!

  Hi there, I have a question about storage, even if I have 2, 53GB, storage watch 21, 99GB usage, why this difference? I use an iMac 2009, thank you!

  Spotlight re-indexing.

• A few questions about the upgrade on Satellite A300-144

  Sorry for the typos, English is not my mother tongue.
  I want to ask some questions about the upgrade of a300-144.

  * Some info first.*

  CPU: T2370 ([http://ark.intel.com/products/34445/Intel-Pentium-Processor-T2370-1M-Cache-1_73-GHz-533-MHz-FSB]).
  Chipset: GM965 ([http://ark.intel.com/products/29821/Intel-82GM965-Graphics-and-Memory-Controller]).

  * Questions.*

  1. my frequency of laptop memory at 533 MHz, supports 667 MHz memory controller, memory modules can work at 667 MHz. Is - this because CPU FSB 533 MHz frequency and new processor at 667/800 MHz FSB will fix it or it is hardcoded in the BIOS?

  2 Intel said that the size of max memory for my chipset is 4 GB (2 x 2 GB), but Toshiba says that only 2 GB (2 x 1 GB), who is right?

  3 I know, taken of my CPU is μFCPGA-478 aka socket P, max FSB 800 MHz, max 35 W TDP, so T9500 ([http://ark.intel.com/products/33918/Intel-Core2-Duo-Processor-T9500-6M-Cache-2_60-GHz-800-MHz-FSB]) is a compatible processor or there are some limitations in the BIOS?

  > 1. My frequency of laptop memory at 533 MHz, supports 667 MHz memory controller, memory modules can work at 667 MHz. Is - this because CPU FSB 533 MHz frequency and new processor at 667/800 MHz FSB will fix it or it is hardcoded in the BIOS?

  The speed of the memory is related on the material. This means that the FSB is responsible for the limitation.
  If the FSB would allow support 667 MHz then the memory would also at this speed.

  > 2. Intel says that the size of max memory for my chipset is 4 GB (2 x 2 GB), but Toshiba says that only 2 GB (2 x 1 GB), who is right?
  The memory depends on the chipset. So if the chipset supports 4 GB of RAM, you should be capable of this move to 4 GB of RAM

  > 3. I know, my CPU is? FC-PGA-478 aka socket P, max FSB 800 MHz, max 35 W TDP, so T9500 (http://ark.intel.com/products/33918/Intel-Core2-Duo-Processor-T9500-6M-Cache-2_60-GHz-800-MHz-FSB) will be a compatible processor or there are some limitations in the BIOS?

  It might be possible that the new processor would be fully supported by the BIOS, but in most cases it should not be a problem if the chipset would support the new processor.
  But as far as I know the upgrade of the CPU is not supported by Toshiba or any other manufacturers of portable and its your own risk to run laptop with the new processor.

• Satellite A350D - 20K - Question about upgrade second HDD + Temperature

  I have a question about my laptop. I have notticed it is a second location of HARD disk on the bottom.
  Is it possible to use this to increase my storage?
  And if yes, how do I do that? I don't see all the connectors.
  What type of HARD drive to use in case it is possible to use this slot machine?

  My second question is on my laptop to be very hot after a short period of use.
  I installed speedfan to record the temperature. When I start the laptop, it already is between 45 and 50 degrees.
  He stayed there for half an hour and then it starts to get warmer. When I start to use the laptop for anything, it triggers to between 70 and 80 degrees.

  This does not seem normal to me. I tried to clean the vents with compressed air, but it has not made a difference.
  I searched on the internet how to take the laptop part for proparly cleaned TI.
  But I can't so I'm looking that destroy it.

  This could be the cause and more importantly, how can I solve this problem?

  Tom

  The second HARD drive bay contains the HARD drive connectors?
  If Yes, then you can use a SATA 2.5 HARD.
  If there are no connectors, then you will not be able to use the second HARD drive

  > I have installed speedfan to record the temperature. When I start the laptop, it already is between 45 and 50 degrees. He stayed there for half an hour and then it starts to get warmer. When I start to use the laptop for anything, it triggers to between 70 and 80 degrees.

  CPU and GPU produce a lot of heat. The heat dissipation is always created then there s nothing unusual that the temperature rose to higher level.
  You can change the settings in Win 7 power management. You can set the CPU to lower performance and can increase the activity of fan, which will help lower the temperature.