Satellite L650-11R - a few questions about this

Similar Questions

• Satellite L650 - 1 M 0 - Question about LED control using a writing software? in C++

  Hello

  Is it possible that a console program written in C controls the State of the led on the computer?
  I speak not here the LED keyboard, but the led corresponding to such a State of hard disk, power state.

  It's at all the possibility to 'take control' over these diodes? Or rather, it controls a separate computer system?

  Most of the care on the State of control module LED WiFi adapter. I replaced the network card, but my laptop is not the end of support. Start the computer, but you can't control adapter to function keys. When you disable the card in Device Manager, the light does not turn off.

  If I could create a program that will control the LED, if I could take a supplement (separate second program) for the function keys, which does not support the new card.
  Laptop is a Toshiba Satellite L650 1 M 0.

  I think that computer security is not strong because it is not protected from the BIOS. If it was, wouldn't at all. Only the lack of logic LED WiFi.
  By taking the scientific program caught can control the LED.

  Please be patient with me and write in plain English-the two shows (I'm a novice programmer C++ programming language) and English.
  I don't know English well, so I took the Google Translate. Sorry for my bad language...

  [b] compiler: [/ b] Microsoft Visual C ++ 2010 Express
  [b] software language: [/ b] C++
  [b] type emission: [/ b] console (maybe later I'll try Windows Form...?)
  [b] system: [/ b] Microsoft Windows 7 x 64

  I know that this forum is no longer on the problems associated with technical problems, but none of you can know what is "address" LED WiFi that is already associated with the knowledge of the equipment.

  Hi Krzysiolek

  I guess that no member of the community would be able to help you in this case very particular.
  I guess you should ask for a person with good knowledge of C++ programming.
  Here you can meet people and enthusiasts who talk technology, share their knowledge and trying to solve some common problems of the laptop.

  However, good luck

• Sides - a few questions about this generation of switching

  Well, I'm here... A user of Final Cut Pro, building a new box for CS5 of Prime Minister. He would you believe? I mainly work with AVCHD / H.264 if all goes well in native mode depending on how the system behaves. Mostly just first edit and convert it to MPEG and H.264 for web and blu ray.

  This is the build I have came with. I love the case, it seems huge.

  Antec twelve hundred black steel ATX Full Tower computer case

  GIGABYTE GA-X58A-UD3R

  Intel Core i7 - 930 Bloomfield 2.8 GHz

  Mushkin Enhanced Redline 6 GB (3 x 2 GB) 240 - Pin DDR3 SDRAM DDR3 1600

  EVGA 012-P3-1470-AR GeForce GTX 470 (Fermi) 1280 MB

  Series HX of CORSAIR CMPSU - 650HX 650W ATX12V v2.2

  
  I have a few questions if you guys don't mind:

  (1) the RAM I have listed is speed 6. But it's only 6 GB. I could spend more and get 12 GB, but it would be much slower (9 speed). I am using only the Prime Minister, encoder and again. Little, or even no AE, etc. The performance gain will be worth investing in slower 12 GB of ram?

  (2) any experience with the Matrox card? Everything I do is exported to blu ray and some of them online (h.264). Looks like the $500 would be well spent.

  (3) what is the cheapest version of Windows 7 that has the characteristics that a person like me would need?

  (4) POWER supply is enough @ 650w? I intend it power hard drives 6 +.

  I have a lot of help apprechiate! Thank you very much!

  1. download both sets of 3 x 2 GB, arrive at 12 GB total.

  2. a complete waste of money. The Matrox cards are great as one doorstop, not much else.

  3. at least Home Premium, but better Pro.

  4. go to eXtreme Power Supply Calculator Pro v2.5 and download the Pro version. The value of CPU load to 100% and the ageing of capacitors to 30% and add 10 to 15% for safety. Don't forget to add a BR burner, fans, USB etc devices

  Discover the impact of memory on the system performance on base here information page: Référence PPBM5

  For other items of interest possibler, click on the preview at the top of the forum Hardware tab and go to the menu drop down.

• A few questions about the Satellite A100 PSAANE

  Hi friends,

  I have a Toshiba Satellite A 100 - PSAANE with Vista Home Basic preinstalled in it.
  Now, I have a few questions... I mention below: -.

  (1) if I want to format my laptop, I need a CD to install for Vista Home basic... then I don't have this Toshiba CD when I bought the laptop. So how do? question: How can I format it?

  (2) can I change my Vista Home Basic to windows XP? I think it's much faster than this one. is it advisable?

  (3) I have a GB of RAM in the laptop. Increase the RAM? I think that my laptop has become to slow down. is it advisable?

  (4) and on my screen, everytime I try to change my profile screen to windows Classic view, my screen begins to blink. and after a while, the screen turns off. So I can't change that. I put the color scheme of windows vista only. What to do about that?

  Please help me friends. Thanks in advance.

  Kind regards
  Perkins

  Hello

  Here, a few questions about the number:

  (1) usually, you should get the Vista Toshiba Recovery DVD. If you didn t receive this DVD then you can order it here https://backupmedia.toshiba.eu/landing.aspx or you could install the disc of Microsoft Vista.

  (2) of course, you can do this. I think that Win XP drivers can be downloaded from the Toshiba driver page.

  (3) Yes, you can upgrade the RAM. For more information, see your manual or search on this forum for similar topics

  (4) maybe it s associated with the graphics driver. Check if you can update. I would recommend additional check if you are using the latest version of the BIOS

  Welcome them

• A few questions about Toshiab reocvery disk for Satellite P300-133

  Hello guys,.
  I had a few questions about unpleasant surprises of recovery:

  (* 1) * I just make recovery DVD using Toshiba Recovery Disk Creator and he asked initially for 2 DVDs - but when one has been done it does not require a second blank DVD. Is it possible all the Windows Vista system files to write on 1 DVD?

  (* 2) * if I could reinstall Windows Vista using recovery of HARD drive option (by pressing F8) without using the recovery DVD?

  (* 3) * HARD drive partitions that will be formatted (just system C: or C: and E :) using HARD drive recovery?

  (* 4) * what is DVD - Image of the hard drives or the installation of Vista recovery files?

  Its pretty bad idea to not include BONES on DVD when I paid for it.
  Thanks for all the Toshiba problems :(

  1. I think the recovery disk creator means 2 CDs. I also have a Portege M700 with Windows Vista and a DVD. I got it and after that, I have a clean install of Vista with all the drivers and tools of Toshiba. Nothing is missing.

  2. Yes, you can reinstall Vista using recovery of HARD drive option when you press F8 at startup. You don't need the recovery DVDs, but you should create a when your HARD drive get some errors or something else. If you need a new recovery DVDs, you paid for one.

  3 HARD drive and complete partitions will be formatted, so backup your data first on a DVD disk external DRIVE, USB stick or something else.
  After the reinstallation, you have factory settings.

  4. the recovery DVDs is an image of the HARD disk on the factory settings. If you perform a recovery, there are all the drivers and tools are already installed. Of course, on the disk are files of installations of Vista, but you can use this DVD on your Satellite P300. The disc cannot be used on another Satellite or on a PC.

  If you have any other questions, take a look in the user manual. There are a number in the formations of the recovery. It s in Chapter 3.

• Recently bought a laptop computer; A few questions about the offer Upgrade to Windows 8

  I have a few questions about the Upgrade of Windows 8 offer for new computers.  I recently bought a Toshiba Satellite S855-S5268 of amazon.com, which came with Windows 7 Home Premium.  Toshiba already has a beta version of drivers and utilities for Windows 8 for the S855 on their Web site.

  (1) I bought my laptop in July of this year, and I've not yet registered for 8 Windows Upgrade offer with Microsoft.  Am I still eligible to receive the upgrade, if I sign up soon?
  (2) if I buy the upgrade through this offer, I'll be able to download an ISO file so I can burn the installation media, or do I need to upgrade to Windows 7?
  (3) if I will be able to burn the installation media, I'll be able to erase my hard drive and do a clean install of Windows 8 (which I'd rather do, I have a lot of backups of my data).  I am aware that I would probably need to provide my product key Windows 7 Home Premium 64-bit OEM during the new installation, because it is an upgrade and not a full version; This isn't a big deal, because my Windows 7 Home Premium 64-bit OEM product key is stuck at the bottom of my laptop.
  (4) my current copy of Windows 7 is activated by seeing my BIOS (I have a traditional BIOS, not a UEFI).  If I had to switch to Windows 8 and decide then I'd rather back in Windows 7, for example, a few months later, I'll be able to do that (I burned recovery of Windows 7 with the Toshiba utility disks, which I did), and Windows 7 will continue to activate by seeing my BIOS, even after the installation (and later remove) Windows 8?
  Thank you very much!

  I have a few questions about the Upgrade of Windows 8 offer for new computers.  I recently bought a Toshiba Satellite S855-S5268 of amazon.com, which came with Windows 7 Home Premium.  Toshiba already has a beta version of drivers and utilities for Windows 8 for the S855 on their Web site.

  (1) I bought my laptop in July of this year, and I've not yet registered for 8 Windows Upgrade offer with Microsoft.  Am I still eligible to receive the upgrade, if I sign up soon?

   

  Yes, the registration period is between June 2, 2012 to January 31, 2013.

  (2) if I buy the upgrade through this offer, I'll be able to download an ISO file so I can burn the installation media, or do I need to upgrade to Windows 7?

   

  Yes, the Upgrade Wizard of Windows 8 will allow you to create a bootable DVD or you can grab the ESD file and save it.

  (3) if I will be able to burn the installation media, I'll be able to erase my hard drive and do a clean install of Windows 8 (which I'd rather do, I have a lot of backups of my data).  I am aware that I would probably need to provide my product key Windows 7 Home Premium 64-bit OEM during the new installation, because it is an upgrade and not a full version; This isn't a big deal, because my Windows 7 Home Premium 64-bit OEM product key is stuck at the bottom of my laptop.

   

  Yes and there are better ways to reinstall Windows 8 without using the installation disc, you can use the reset and refresh.

   

   

  These steps will take you through refreshing your PC:

  · Press the Windows key + C on your keyboard to show the charms (if you use a touch screen: touch the right edge of your screen and drag your finger to the left)

  · Click settings

  · Click change PC settings

  · Click general in the left column

  · Under refresh your PC without affecting your files, click Start

  Then follow the instructions that will be provided on-screen to cool your PC.

  (4) my current copy of Windows 7 is activated by seeing my BIOS (I have a traditional BIOS, not a UEFI).  If I had to switch to Windows 8 and decide then I'd rather back in Windows 7, for example, a few months later, I'll be able to do that (I burned recovery of Windows 7 with the Toshiba utility disks, which I did), and Windows 7 will continue to activate by seeing my BIOS, even after the installation (and later remove) Windows 8?
   
  As long as you have a recovery disk which you should create or use the construction in the recovery partition, Yes, it will self activate.
  Thank you very much!

• Satellite L650-11R - broadcom WLan 802.11n does not

  Hello!

  I had some problems with my internet and everything trying to solve this problem, somehow I uninstalled my network card and its drivers.

  After that (I reinstalled several times), unit is here, but it says in Device Manager that is activated, but when I go to the device in network settings, it says that it is diseblaed and its painted in grey (I clicked, window opens saying "enabaling"... but nothing happens after that). Also, I know that of not work beacause it does not find my home WIFI network and other devices in the House are connected to the home network. In the right corner of the screen there is red ' x'.

  Also, when I run windows repair to see what is the problem of network it says that my network card is probably bad drivers and I should change that.

  I tried a lot of drivers for broadcom 802.11n on the internet, but nothing seems to work.

  My laptop is Toshiba satellite L650-11R
  network card: broadcom 802.11n
  am on Windows 7 64 bit home edition

  Help me to find drivers or tell me how to install correctly with corect NIC drivers.

  Please help, thanks in advance!

  I solved my problem. All the drivers that I tried to install worked

  The real problem was antivirus, I uninstalled Zone Alarm security and now I have internet!

• Satellite L650-11R - its is trolling when the screen is off

  Hello people.

  I have an interesting problem. In fact, I have a Satellite L650-11R and TV Panasonic TX P42X10Y.

  When I connect the laptop and TV via HDMI and everything works as it should be, games, movies, but everything works fine until the screen of the laptop is open. While it is closed or if you switchmake the TV your main screen or the office, the sound in the movies is bad.
  And not every 30 seconds or minutes rather than continuous. Picture is great, but the sound is a disaster, even a few seconds do not hear a thing.

  The laptop is not even a week, codecs are concerned probably not because the sound works in the movies when the laptop is open.

  Any help appreciated

  PS Sorry for the English

  Hey,.

  To be honest, I never heard such a problem. For example if I connect my laptop to TV cable HDMI I always have good sound quality, even I use two monitors or monitors only.

  In any case, what operating system you have? You use the version preinstalled Windows or another?

  First of all I would update the audio driver. His most recent driver, you can download from the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

• Satellite L650-11R - updated graphics card drivers

  Hello!

  I have a Satellite L650-11R(that's what's written on the box) and my problem is that I found the latest drivers for my Mobility Radeon HD 5650 series and when well even as the site of AMD says that this driver is mobility graphics cards when I want to install the computer tells me that these drivers support not my graphic instrument and if I go to Device Manager the only card that appears is the VGA! So now the only drivers that I can install are outdated (8.753.0.0)
  And im wondering why I am condemned to use these wwhen out-of-date driver clearly there's more recent avalible?

  I hope some1 reading this!

  Hi yusty,.

  Why you are looking for on the AMD Web site directly to the latest drivers? All drivers for your computer is located on the Toshiba official European driver download page:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  And I don t understand why it s a problem with older drivers. Not always the most recent driver is the best.
  In addition, only the drivers provided on the official website of Toshiba are pre-tested and designed for your laptop. Install the other drivers that happens on your own risk

• Hello Mr President! I have a few questions about the Word report generation please.1.How can I add a border to a page in word? 2. How can I add gridlines to a table generated related word?. Can 3. how I add a border to a picture of the Word report?. Thank

  Hello!

  Sir, I have a few questions about generating word reports using (C language in labwindows) please.

  1. How can I add a border to a page in word?

  2. How do I add border lines and grid to a table generated in Word report (not "cvi control table"inserted from gui, I wonder about the table generated in Word report)?

  3. How can I fill a table cell of report word with the data type other than 'character '.

  And sir a question on the use of the timer in labwindows cvi please.

  Sir, I'm trying to set a time minimum interval timer to 1millisecond (0.001 s), that I have set, timer cares about the interval set by me he only meets the minimum default time interval which is, I think as 10milliseconds (I'm using windows xp service Pack 3 version 2002).

  Concerning

  Imran

  Pakistan

  Have you read this statement ? It explains how to set the registry value:

  If the REG_SZ useDefaultTimer does not already exist, you must create it under HKEY_LOCAL_MACHINE\SOFTWARE\National Instruments\CVI Run-Time Engine\cvirte. "" This can be done navigate to the appropriate folder, and then click Edit "New" string value. Then, click on means the name of the new value created, select Rename, and then specify useDefaultTimer as the name. Finally, double click on the name and specify the value True or False.

• A few questions about the use of data and Cliq

  I have the cliq, however I chose to not get 3G (so I bought full fare). So I have a few questions about the phone and the use of 3G / 2 G/Edge:

  1 - is possible to disable completely the 2G / 3 G/Edge? I know you can switch between them, but are anyway just tell the phone to stop using them altogether since I'm not subbed to the service?

  2. when the update takes place, I guess we'll have to reconnect motoblur and etc, but if I don't have 3 G will I have motoblur connection problems after the update? Or he keeps the latest wifi settings so that it would connect to wifi to connect. When I first got my phone it was not a problem b/c I had 3G for the first month.

  I hope that makes sense, thanks!

  To stop all the data, I would like to download an application called APNDroid. He cut them all down. When you log on to blur you have 3G or WIFI doe this without getting a timeout error. During the process of setting up your Blur account, you can press the menu button and set up your wifi to work, this will connect you to Blur and your phone will be connected to the blur. If I were you I would be rethinking to do a data plan since you are really losing out on most of your main features of phones. It's your choice, however.

• Hello, I have a few questions about the affiliation of creative cloud

  Hallo,

  I have a few questions about the affiliation of creative cloud:

  1. There is an Adobe offer up to 27.11. : the price offered is 47.59 euros per month including MWSt (VAT) or €568,20 / year.

  For what is this offer period/how many years valid?

  2. after the period of the offer, the membership will cost the standard-price: €59,49 / month or €713,86 / year (seen on the Adobe Web site).

  For how many years this standard - the price is fixed?

  Is the standard-prices include MWSt. (VAT) too?

  Thank you

  Thomas

  Hello

  I advise you to contact Adobe sales for queries on pricing.

  Contact us | Adobe

  Kind regards

  Sheena

• a few questions about vcloud

  I have a few questions about vcloud.  Currently, we use labmanager and are testing vcloud to see how we can apply it to our environment.  The current labmanager serves the following purpose:

  -create dev and QA 'environments' (configurations) that are copies of production servers so that the changes can be tested

  -environments deploy everything from models that are clones of production servers that we update as required

  -We have several models of "database" that freshen production according to the needs in order to provide a current recuree version of the database of production for these environments

  -computers in virtual environments are able to talk to each other using their 'production' IPs, because IP addresses are closed and accessible only internally within the

  -Each VM has an "external IP" that we can use to access the virtual machines from outside the environment.  for example, access a Web site through the front-end server within the environment, or RDP to a windows virtual computer within an environment.

  I am trying to determine how this translates into vcloud configuration, and I think I have a rough idea.  However I have a few questions:

  As I understand it, has no way to RDP to a virtual machine in a paralytic 'environment' unless the virtual machine is directly routed, correct?  In other words, we cannot copy the configuration that we have above, where the virtual machine has an internal IP address that corresponds to the IP address of the server in production and is used to refer to other virtual machines in the same environment of vApp, however there is also one external IP address, we can use to access this virtual machine via RDP or access its site Web etc.?

  I have 2 servers windows 2008, I imported as models, and each time I deploy a virtual using the VAPP model computer, the server seems to restart after 15 minutes be on is, and it seems to go through a windows installation, where it says "preparing your system for a first use" etc.  And when it arrives, the administrator password I put is no longer correct (so I have no idea why / what it changes the administrator password).  At this point, the virtual machine is useless since I can't connect to it.  No idea why this happens each time I have deploy a model VM?

  We talk here: http://www.yellow-bricks.com/2010/09/15/vcd-networking-part-3-use-case .  Not exactly a step by step for your case to use, but you should be able to get this up and running and configure NAT in the opposite direction.

  -KjB

• EBS 12.1.3: a few questions about cloning

  Hello
  
  We have EBS 12.1.3 on AIX 7.1.
  
  A few questions about the cloning of level shared environment of application layer non-shared application environment. We followed 'Cloning Oracle Applications V12 with rapid Clone [ID 406982.1]'
  
  Environment (shared application layer) source:
  -Two nodes in the active application and LBS
  -A database of active and a passive database configuration with Oracle Data Guard.
  -Terminate SSL at the load balancer
  -Updated CFP implementation
  
  Environment target (level app not shared):
  -A single node of the application active
  -One data node active
  -Without SSL
  -No PCP
  
  After the cloning was completed, we noticed the following problems in the target system:
  
  (1) home page is not available because application $CONTEXT_FILE layer always contains the endpoint "https" and ssl settings.
  
  Workaround solution:
  
  Change (with text editor) layer Application $CONTEXT_FILE as follows.
  < webentryurlprotocol oa_var = "s_webentryurlprotocol" custom = "yes" > http < / webentryurlprotocol >
  < sslterminator oa_var = "s_enable_sslterminator" > # < / sslterminator >
  < login_page = "s_login_page" custom = 'yes' oa_var > http://myhost.mydomain.com:8000/OA_HTML/AppsLogin < / login_page >
  < externURL oa_var = "s_external_url" custom = "yes" > http://myhost.mydomain.com:8000 < / externURL >
  
  Run the automatic configuration service and application layer.
  
  Is there a better solution and supported for this?
  
  (2) simultaneous managers do not work properly, because they still have old names of node (used in the CFP in the source system). The solution is used:
  
  1. connect to the EBS GUI web and delete all nodes of all concurrent managers.
  2 shutdown application layer. Check that all concurrent managers have been extinguished. If not, kill the process manually
  3. as a user apps run cmclean.sql
  4 restart the application layer
  
  Is there a better solution for this?
  
  (3) database ARCHIVELOG mode nonarchivelog mode changes in the target system. Is anyway to prevent this?
  
  (4) in addition, we would like to make a full clone (app + db levels) of production without closing the application. Is this possible? What would be the best documents to describe it? In Production, we have Oracle Data Guard physical standby installation as per "Note technique Oracle: Business Continuity for Oracle E-Business release 12 Using Oracle 11g Physical Standby Database [1070033.1 ID]. This can be used when executing a clone of warm for the database, right? What application layer? The steps in 406982.1 include AutoConfig in what application level should be running down. Must the application be broken when running "to maintain the Snapshot information?"
  
  (5) one last question (not related to cloning). Oracle Enterprise Manager console webUI has recently stopped working in IE8. For example, https://myhost.mydomain.com:5501 / em gives "cannot display the Page. It was working properly last week. In Firefox, the same link works fine. Any ideas how to solve this problem?
  
  Thanks for your replies in advance.
  
  BR,
  TH

  (1) home page is not available because application $CONTEXT_FILE layer always contains the endpoint "https" and ssl settings.

  Workaround solution:

  Change (with text editor) layer Application $CONTEXT_FILE as follows.
  http
  #
  http://myhost.mydomain.com:8000/OA_HTML/AppsLogin
  http://myhost.mydomain.com:8000

  Run the automatic configuration service and application layer.

  Is there a better solution and supported for this?

  No, you must modify the context manually and run the automatic configuration.

  (2) simultaneous managers do not work properly, because they still have old names of node (used in the CFP in the source system). The solution is used:

  1. connect to the EBS GUI web and delete all nodes of all concurrent managers.
  2 shutdown application layer. Check that all concurrent managers have been extinguished. If not, kill the process manually
  3. as a user apps run cmclean.sql
  4 restart the application layer

  Is there a better solution for this?

  You follow the best approach. You could update the details of the server node if you wish.

  (3) database ARCHIVELOG mode nonarchivelog mode changes in the target system. Is anyway to prevent this?

  By default, the quick Clone will create the target in noarchivelog mode database.

  (4) in addition, we would like to make a full clone (app + db levels) of production without closing the application. Is this possible? What would be the best documents to describe it? In Production, we have Oracle Data Guard physical standby installation as per "Note technique Oracle: Business Continuity for Oracle E-Business release 12 Using Oracle 11g Physical Standby Database [1070033.1 ID]. This can be used when executing a clone of warm for the database, right?

  Fix.

  What application layer? The steps in 406982.1 include AutoConfig in what application level should be running down. Must the application be broken when running "to maintain the Snapshot information?"

  You can copy the files from the application tier node, while demand is rising. And, there is no need to stop the application to run "to maintain the Snapshot information."

  (5) one last question (not related to cloning). Oracle Enterprise Manager console webUI has recently stopped working in IE8. For example, https://myhost.mydomain.com:5501 / em gives "cannot display the Page. It was working properly last week. In Firefox, the same link works fine. Any ideas how to solve this problem?

  If it works from a browser, then it should not be a problem of EM. Have you tried another client and see if it works? Have you changed a setting in your Internet Explorer browser? Please make sure you add the URL of the EM to the list of trusted sites.

  Thank you
  Hussein

• A few questions about the colors of Patone

  I have a few questions about patone color since it is the first time that I use. I want to use them to create a paper letterhead and business cards in two colors.

  1)

  I don't understand that no sex is more than coated patone washed out colors. I heard that it's because the way paper absorbs the inkt. That is why the same results inkt in different colors on different papers (right?). My question is why is the patone black no sex so different than black normal (c = 0 m = 0 y = 0, k = 100) or black intense:

  

  When I print a normal document with cmyk, I can get pretty dark black color. How is it that I can't have this dark with patone color black color? Even text documents printed on a cheap printer can get a darker color than the color of Patone. He looks way too grey for me.

  (2) a first model, I want to print of patone in CMYK color (since I have like 10 different colors on a page of quick comparison). I know these CMYK colors distinguish the colors of patone and I can't get a representation of 100%. But is there a way to convert patone CMYK values?

  I hope some of you can help me with my questions.

  Thank you.

  You can get shades CMYK Pantone in Illustrator, (Swatches Panel > Open Swatch Library > color books > + PANTONE Color Bridge Coated or lying) but in my opinion, what's the point?  If you print to a digital printer, just use RGB (HSB) or CMYK. Personally, I never use CMYK called "equivalents." from Pantone

  Pantone colors are all mixed pigmented inks, which are fluorescent beyond the limits of the range of RGB and CMYK in particular. The original Pantone Matching System (PMS) was created for the printing industry. He described formulations of ink pigmented for each of its colors.

  Most digital printers (laser or inkjet) use CMYK. The range of CMYK is MUCH SMALLER than many mixed inks, printed on papers either paved or unpaved can deliver. When you specify no sex Pantone ink in artificial intelligence, according to Pantone conversion tables, HAVE "about" what will look like this color on a sheet no bed, try using CMYK. -In my opinion, this has little relevance to the real world conditions and should be avoided in most situations.

  If your project must be printed on a press printing with Pantone inks spots, then by all means, use Pantone colors. But don't trust the colors of the screen; rather get a Pantone swatch book and watch real inks on paper lying and uncoated, depending on the stock you will use on the press.

  With printing decreases rapidly for inkjet and web printers, Pantone has attempted to expand its relevance beyond the traction-date of publication (in the books and software alliances, with one such as Adobe) his old PMS inks and their supposed equivalent LAB and CMYK. I say "supposed" because even once, monitors RGB and CMYK inks can never be literally equivalent to many Pantone inks. But if you go to your project on a printing press printing, Pantone inks are still very relevant as of the "tones".

  I also put my preferences I > appearance of black both display all blacks accurately and output all blacks accurately. The only exception to this may be when you print on a digital printer, where there should be no problem checking.

  Rich black in artificial intelligence is a phenomenon of the screen, at least in the Prefs > appearance of Black, you specify also "out all inks like Rich Black"-something I'd do it EVER do so out for a real printing press. Still, I put my black people in artificial intelligence at the "output All Blacks Acurately" during a press release. If you fail to do so, then the press you will see any minor issue registration, with C, M and look at the back, especially around black characters.  UGH!

  Good luck!  :+)