Question about the code on top a sliced image

Similar Questions

• Question about the charging light on the venue Pro 11 (5130)

  I'm curious... read these discussions in recent weeks... found this work with the Tablet for about 2.5 hours after... I was up to 75% of battery. Connect the tablet to install a software... noticed 75%, not charging. Stop... removed the battery and put it back... He then read 75%, in charge. OK... so what's fixed now... a question about the manual of the system. Said that when the battery is charging, a white light is supposed to be on... where? When that I start, I see a momentary white light at the top of the screen, by the front camera... but when it is plugged and the loading and off... white light no.... No a - I misread? Thank you

  Light (color is white when the load) is located next to the power switch (top, right). Mine re-load very fast.

  White light goes off (or does not) when the Tablet is fully charged (the light on the charger is always on when it is plugged into the outlet)...

• An error occurred when DNS was questioned about the resource record (SRV) service location used to locate a domain controller Active Directory (AD DC) for the domain 'HAMI. LOCAL ".

  An error occurred when DNS was questioned about the resource record (SRV) service location used to locate a domain controller Active Directory (AD DC) for the domain 'HAMI. LOCAL ".

  The error was: "an existing connection was to be closed by the remote host".
  (0 x 00002746 WSAECONNRESET error code)

  The query was for the SRV record for _ldap._tcp.dc._msdcs. HAMI. LOCAL

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Forums TechNet Windows 7 Technet.

  Here is the link:
  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  Hope this helps

• The specific question about the placement of an image into text.

  Hello, I had a question about the placement of an image into text.

  I did the contours to create text to place the image inside. My text is 5 words and two lines inside the box.

  When I do create contours he gives me 2 transparent route separate layers for the top and the bottom line.

  How will I be able to do that in a single layer of compound to place image that expands to the two lines?

  First of all, there are two ways of describing the type. The default value creates anchored objects. You want a separate object, so hold down the Option/Alt key when you create outlines. Drag the new contours to separate the text block.

  It is useful to open the layers panel and view the contents of the layer. You have created a group which consists of two transparent traces. In the layers panel, expand the layer so you can see the structure. Shift-select the two transparent traces. (Make sure that the group is not selected.)

  

  Then choose object > tracks > make a compound path. This makes the two transparent tracks into one. Then, you can place or paste into the single compound path.

• Where should questions about the JDEV/ADF positions?

  Hello

  Where should questions about the JDEV/ADF positions?

  JDeveloper and ADF or

  JDeveloper and ADF?

  I found there may be some different advantageous:

  https://forums.Oracle.com/message/11109674?TSTART=0#11109674

  Thank you.

  Well, the other forum you mentioned is the Korean equivalent of the English forum.

  You have already discovered, it is not controlled to many users. I didn't know that it exists at all.

  In general it is to you where you ask your questions. All for one here are driven by the community and some employees of the Oracle, you cannot wait has answered all your questions. If you really need to answer you go through paid support.

  A tip for getting help is to provide a well-defined use cases, information relating to your environment and documented code showing what you have already tried.

  Timo

• A few Questions about the advanced Actions window

  Hello

  I have a few questions about the progress of the Actions (using the version of track CP7)

  1. What is the function of the action to "continue?"   Out of the peak action and advance the playback cursor?

  2. What does mean this comment "Nested calls to action advanced is a nice improvement."? Is the advanced decision at the top of a page of action tabs?

  3. What is the function of the option "custom" in the IF statement - "preform action if - custom", it doesn't seem to do anything for me?

  4. where can I get information about the timeline / playhead interaction with advanced actions, i.e. where the playhead is going again at the beginning of the slide. slide custom question - display button, e.g. verification of responses, comments - when all the objects are at the beginning of the timeline. I'm looking more for the read head of infromation functionality rather than how to implement this type of question.

  Thank you

  Donal.

  Continue: If an advanced standard action is triggered by a button, this will not trigger the playback head. If you want out, you can use continues. Continue can also be a choice in a conditional action, when one orders branching has nothing to special, but in advance. Continuous is also the "dummy" statement/command (this is the official name of a line in the dialog box advanced actions) If a statement has become unusable due to some reasons, it will be replaced by continue

  There is no nested call stocks advanced possible right now, one of my many feature requests. It would be sort of a subroutine that you can use over and over again, instead of having to create each time when necessary.

  A decision is one of the conditions to be an advanced conditional action. They allow to create more complex actions, as a loop or arrays are not possible. All decisions are executed in sequence and always.

  Custom: is a combination of or but it is rather limited, because you cannot use parentheses.

  I guess you'd better visit my blog if you want to learn more about the advanced actions.

  http://blog.lilybiri.com/

  I also did several Webinars on stocks advanced, last this afternoon (on the sharing of the actions) for Adobe. They are all available on request.

  Lilybiri

• Question about the interruptions and priming

  Hello

  I had a few questions about the startup and interruptions in a virtualized environment

  Assuming that, plenty of virtualization (no material assistance to virtualization of memory ).

  1 initialization: in an ordinary PC, the boot process starts with the BIOS, to expansion ROM, back to the BIOS and MBR secondary boot record, then grub (is it) and finally the operating system. In a virtualized environment with VMM running directly on top of hardware (Native VMM), how is the initialization of the different process, as I understand it takes BIOS-> Expansion ROM - > BIOS-MBR-> other record secondary-> VMM-> OS--> applications >. Am I right on that?

  2 breaks: VMM examines the source interruptions prior to the interruption, so in a multicore environment, assuming a 2 processor core, how the VMM decides on the kernel for which the interruption in intended, prior to shipment of the interruption. Interruptions are tag ID, said core ID?

  Thanks in advance

  -SC

  sidc7 wrote:

  1 initialization: in an ordinary PC, the boot process starts with the BIOS, to expansion ROM, back to the BIOS and MBR secondary boot record, then grub (is it) and finally the operating system. In a virtualized environment with VMM running directly on top of hardware (Native VMM), how is the different boot process, if I understand correctly to -> BIOS-> Expansion ROM BIOS-> MBR-> other documents-->--> OS--> requests VMM. Am I right on that?

  It is simplistic but essentially correct.  A metaphor would be a little better thinking that the hypervisor/vmm is an operating system, except that the process on this operating system are requests or comments OSes.  If the BIOS-> OPROM-> BIOS-> MBR-> hypervisor-> init process of the hypervisor-> reviews of fork () s operating systems.  This can become blurred by the design choices (for example Xen/Hyper-V init start a coded parent hard partition that makes hypercalls privileged to fork() guest OSes; ESXi init runs a very limited subset of applications directly on the hypervisor and ESX Classic is somewhere between these approaches).

  There is a subtle distinction between "hypervisor" and "www."  The "hypervisor" is the operating system of single root (e.g. ESX) who interacts directly with the hardware and has access to everything; a hypervisor is not to be used to run virtual machines.  When we talk about a "hypervisor", the tendency is to describe something which is a BONE (although usually a minimal OS designed only to run virtual machines).  The "www" is the layer that allows a virtual machine run: it provides the interposition, virtualization and emulation services and can be plural (for example a vmm by guest operating system).  Architecture of VMware deal with these two separate components, while most other virtualization platforms merge the two.

  sidc7 wrote:

  2 breaks: VMM examines the source interruptions prior to the interruption, so in a multicore environment, assuming a 2 processor core, how the VMM decides on the kernel for which the interruption in intended, prior to shipment of the interruption. Interruptions are tag ID, said core ID?

  Strictly speaking, the interruption is not transmitted to a guest operating system - receives the hypervisor (or rather the VMM it transmits to the hypervisor), the hypervisor drivers interpret the interruption (for example reading package of NIC, I/O process of HBA, the timer tick completion), then after a new appropriate break in the guest OS.

• Question about the pen tool (w / photo inside)

  Hi all! I have a question about the pen tool. I think that this picture is very useful for my question:

  

  So in this pic is an orange rectangle, and within this rectangle is a blue strip. I would like the blue band surface perfectly (not too much and not covered) the edge of the rectangle. For example, on the lower end of the blue band, you can clearly see that the band does not extend quite far to the edge of the orange rectangle. At the top of the band, he's a little more (a little hard to see). I work with some complex shapes when you use the pen tool and it's really slow me down to compensate for over/under Forms. If she could just snap to the borders of the other forms that would make my life a lot easier. Thanks for reading and please help!

  Duplicate the orange shape and change the fill color to blue. Draw your new shape on that layer, using the Intersect option.

• I have a simple question about the meta-data.

  Hello. It is a simple question about the meta-data. How can I get the video bitrate of a flv or mp4 (video playing via NetStream file) file

  right now I have this:

  Code
  var netClient:Object = new Object(); netClient.onMetaData = function(meta:Object) { for (var in meta props) {} trace (props + ":" + meta [props]); } MovieClip (root) .durations = meta.duration; trace (MovieClip (root) .durations); }; NS.client = netClient;

  And my output is:

  videocodecid: avc1
  audiocodecid: m4as
  aacaot: 2
  Width: 960
  AudioChannels: 2
  videoframerate: 23.976
  TrackInfo: [object Object], [object Object]
  moovposition: 32
  avcprofile: 77
  audiosamplerate: 48000
  avclevel: 31
  seekpoints: [object Object], [object Object], [object Object], [object Object]
  height: 540
  Duration: 221.312

  As you can see, there is nothing of video bitrate.

  I know that the video bitrate of my videos, but then I have to manually type each number of bitrate into my flash project, and it would be such a fuss when I have a lot of videos. Would be nice if flash can detect the video bitrate.

  It's for my online portfolio.

  Why you divide by 8?  If you want to convert bytes into bits, multiply by 8.

• A few questions about the difference between the Satellite P70, L70, S70

  Hello, I have a lot of questions about the P70, L70, S70 series that come with a 1920 x 1080 panel.

  (1) what are the differences between the L70 and S70 series? With the exception of the RAM and HARD drive capacity, books seem pretty identical.

  (2) P70, L70, S70 doesn't support a 2nd HARD drive or it's just the P70 series that support?

  (3) all the three (P70, L70, S70 series) come with the same TFT panels?

  (4) of the above series, which supports mSata?

  (5) all the model of each series are delivered with support from mSata? For example, it could be that L70 - a - 13 m supports mSata is not the case of the L70-a-146?

  (6) all the foregoing, are delivered with a S - ATA II or III S - ATA interface?

  (7) who is the best of these series listed? I'm trying to understand what makes the big difference of S70 to P70 except for the envelope for example.

  Thank you in advance.

  > (1) what are the differences between the series L70 and S70? With the exception of the RAM and HARD drive capacity, books seem pretty identical.

  What models Sat L70 and S70 do you mean exactly? There are different L70-xxx-xxx and S70 models on the market that supports different hardware specifications.

  (> S70 2) P70, L70, support a 2nd drive HARD or is - it just the series P70 that support?
  As you can see in this [Sam P70 HDD replacement document, | http://aps2.toshiba-tro.de/kb0/CRU3903II0000R01.htm] the P70 series supports the 2nd drive Bay HARD, BUT even if there is a 2nd HARD drive Bay, this does not mean that you can use the 2nd HARD drive. In the case where the 2nd HARD drive Bay are equipped with HARD drive connector, you can use the 2nd HARD drive

  I also found the [Sam L70/S70 HDD replacement | http://aps2.toshiba-tro.de/kb0/CRU3703HG0000R01.htm] the document on the Toshiba page and there I see this 2nd HARD drive Bay is not available

  (> 3) all three (P70, L70, S70 series) come with the same TFT panels?
  See point 1). Different P70, L70, S70 models were equipped with different material parts.

  (> 4) of the series above, which takes in charge mSata?
  As far as I know that some P70 models are equipped with an mSATA SSD of 256 GB.

  (> 5) do all the model of each series are delivered with support mSata? For example, it could be that L70 - a - 13 m supports mSata is not the case of the L70-a-146?
  See point 4) not all models supports the same hardware specifications

  (> 6) all of the above, come with a S - ATA II or III S - ATA interface?
  I don t think that SATA III is supported. I guess it would be SATA II

  (> 7) which is the best of these series listed? I'm trying to understand what makes the big difference of S70 to P70 except for the envelope for example.
  Not easy to answer because there are too many models released in Europea.
  And not all models are available in each country. So I guess you will have to look for the models that have been released in your country.

• A few questions about the upgrade on Satellite A300-144

  Sorry for the typos, English is not my mother tongue.
  I want to ask some questions about the upgrade of a300-144.

  * Some info first.*

  CPU: T2370 ([http://ark.intel.com/products/34445/Intel-Pentium-Processor-T2370-1M-Cache-1_73-GHz-533-MHz-FSB]).
  Chipset: GM965 ([http://ark.intel.com/products/29821/Intel-82GM965-Graphics-and-Memory-Controller]).

  * Questions.*

  1. my frequency of laptop memory at 533 MHz, supports 667 MHz memory controller, memory modules can work at 667 MHz. Is - this because CPU FSB 533 MHz frequency and new processor at 667/800 MHz FSB will fix it or it is hardcoded in the BIOS?

  2 Intel said that the size of max memory for my chipset is 4 GB (2 x 2 GB), but Toshiba says that only 2 GB (2 x 1 GB), who is right?

  3 I know, taken of my CPU is μFCPGA-478 aka socket P, max FSB 800 MHz, max 35 W TDP, so T9500 ([http://ark.intel.com/products/33918/Intel-Core2-Duo-Processor-T9500-6M-Cache-2_60-GHz-800-MHz-FSB]) is a compatible processor or there are some limitations in the BIOS?

  > 1. My frequency of laptop memory at 533 MHz, supports 667 MHz memory controller, memory modules can work at 667 MHz. Is - this because CPU FSB 533 MHz frequency and new processor at 667/800 MHz FSB will fix it or it is hardcoded in the BIOS?

  The speed of the memory is related on the material. This means that the FSB is responsible for the limitation.
  If the FSB would allow support 667 MHz then the memory would also at this speed.

  > 2. Intel says that the size of max memory for my chipset is 4 GB (2 x 2 GB), but Toshiba says that only 2 GB (2 x 1 GB), who is right?
  The memory depends on the chipset. So if the chipset supports 4 GB of RAM, you should be capable of this move to 4 GB of RAM

  > 3. I know, my CPU is? FC-PGA-478 aka socket P, max FSB 800 MHz, max 35 W TDP, so T9500 (http://ark.intel.com/products/33918/Intel-Core2-Duo-Processor-T9500-6M-Cache-2_60-GHz-800-MHz-FSB) will be a compatible processor or there are some limitations in the BIOS?

  It might be possible that the new processor would be fully supported by the BIOS, but in most cases it should not be a problem if the chipset would support the new processor.
  But as far as I know the upgrade of the CPU is not supported by Toshiba or any other manufacturers of portable and its your own risk to run laptop with the new processor.

• Question about the recovery partition

  Hello.

  I have a question about the recovery of HARD drive partition.

  If I do the operation to clear the hard disk option in the wizard it will remove * all * or it will keep my partition recovery in this way I can come back later. I want to know because I would like to put on a different OS.

  I know he said he would, but caution in the PDF, I found it says that on a normal recovery too (that he would remove each partition) and I'm a little confused about how the recovery actually worked.

  Thank you.

  Hey Buddy,

  To be honest I n don't know what you mean exactly with this option to erase.

  In General, Toshiba Recovery disk will wipe your entire HDD to restore factory settings correctly. This means that if you start from that disk and follow the instructions on the screen, everything will be removed.

  In addition, the recovery disk doesn t create a recovery partition. It is not available. Disk copy just the files on the second partition in folder HDDrecovery to start an installation of HARD drive recovery.

• A few questions about the Satellite A100 PSAANE

  Hi friends,

  I have a Toshiba Satellite A 100 - PSAANE with Vista Home Basic preinstalled in it.
  Now, I have a few questions... I mention below: -.

  (1) if I want to format my laptop, I need a CD to install for Vista Home basic... then I don't have this Toshiba CD when I bought the laptop. So how do? question: How can I format it?

  (2) can I change my Vista Home Basic to windows XP? I think it's much faster than this one. is it advisable?

  (3) I have a GB of RAM in the laptop. Increase the RAM? I think that my laptop has become to slow down. is it advisable?

  (4) and on my screen, everytime I try to change my profile screen to windows Classic view, my screen begins to blink. and after a while, the screen turns off. So I can't change that. I put the color scheme of windows vista only. What to do about that?

  Please help me friends. Thanks in advance.

  Kind regards
  Perkins

  Hello

  Here, a few questions about the number:

  (1) usually, you should get the Vista Toshiba Recovery DVD. If you didn t receive this DVD then you can order it here https://backupmedia.toshiba.eu/landing.aspx or you could install the disc of Microsoft Vista.

  (2) of course, you can do this. I think that Win XP drivers can be downloaded from the Toshiba driver page.

  (3) Yes, you can upgrade the RAM. For more information, see your manual or search on this forum for similar topics

  (4) maybe it s associated with the graphics driver. Check if you can update. I would recommend additional check if you are using the latest version of the BIOS

  Welcome them

• Re: Several questions about the recovery of the Satellite L750 features

  I have several questions about the recovery of Satellite L750 features available to it. Any help and answers would be useful.

  (1) when I started the laptop first, he asked me to create a recovery CD incase I need to reinstall the operating system. But he also said that he built in the recovery partition, so therefore, I have to make a recovery cd or not?

  (2) will be the recovery CD is exactly the same as the recovery on the system partition?

  (3) is the partion of CD or recovery includes all the integrated software pre-installed with the laptop?

  (4) also in the device manage management it shows watch partion recovery but it is empty, is it true?

  (5) in the second partition (drive D) system, he has a record with what looks like the recovery of files and folders. Is it safe to move/remove it?

  Hello

  I'll try to provide answers:
  1 - to ensure that everything works perfectly you don t need these discs, but if something goes wrong with the HARD drive you will not be able to do anything. When you have the recovery DVDs, you will still be able to install the recovery image and once again the factory settings. So my advice to you is: create these discs as soon as possible. Use only on DVD-R media and buy products of high quality (TDK or Verbatim).
  2 - Yes.
  3 - Yes.
  4 - No. Don t be confused with this.
  5. in a first time create restore DVD, and later you can do what you want. I put t know which files mean you but don t touch anything before that of the recovery disks to be created.

  In the past, many people have been experimenting with the structure of HARD drive and partitions and later was surprised when installing disk recovery HARD has been damaged. Don t make the same mistake.

  If you have any other questions you are welcome.

• Question about the new Yoga 10 HD +.

  Hello

  A few questions about the new Yoga 10 HD + that I hope you can answer.

  I bought the former model, last year. Love the design and long battery life, but a few major questions made me return.

  • Somewhere that I've read that it can not read NTFS on USB so I guess that's the same thing with a NTFS formatted microSD card?
  • Can it read exFAT formatted microSD cards?
  • Anyone who has questions about the audio via bluetooth?
    (I know that BT is not exactly High End HiFi but the old 10 Yoga for some obscure reason - most likely a driver problem which nobody cared to fix - rang * very * worst with visibly distortion while both my phone and a Tablet noname cheap I have zero about fidelity - any of my devices bluetooth audio) I tried aptX or not)

  So to avoid buying it back it also I really I would like to see if I can get my questions answered before buy you.

  While I love the form factor and long term issues above are only two Mayor dealbreakers for me. Bad audio quality = no joy listen to spotify, local etc. MP3s. not of NTFS or exFAT = some great movies.

  My old noname android Tablet really could use an upgrade so I'm really curious it may be, or I should watch the competition and will be form factor and battery LIFE.

  Thanks in advance.

  EDIT:

  If it does not support NTFS or exFAT on microSD card have someone at - he tried ext3 or ext4?

  I mean with Linux Android root, it should be a no-brainer to support at least when it comes to royalties unlike NTFS or exFAT where it * might * have some trouble with Microsoft.

  I used a USB through a USB OTG cable. NTFS or exFAT have been recognized by the Tablet PC. FAT32 is seems to be the preference.