Question about the CS5 upgrade paths

Similar Questions

• Recently bought a laptop computer; A few questions about the offer Upgrade to Windows 8

  I have a few questions about the Upgrade of Windows 8 offer for new computers.  I recently bought a Toshiba Satellite S855-S5268 of amazon.com, which came with Windows 7 Home Premium.  Toshiba already has a beta version of drivers and utilities for Windows 8 for the S855 on their Web site.

  (1) I bought my laptop in July of this year, and I've not yet registered for 8 Windows Upgrade offer with Microsoft.  Am I still eligible to receive the upgrade, if I sign up soon?
  (2) if I buy the upgrade through this offer, I'll be able to download an ISO file so I can burn the installation media, or do I need to upgrade to Windows 7?
  (3) if I will be able to burn the installation media, I'll be able to erase my hard drive and do a clean install of Windows 8 (which I'd rather do, I have a lot of backups of my data).  I am aware that I would probably need to provide my product key Windows 7 Home Premium 64-bit OEM during the new installation, because it is an upgrade and not a full version; This isn't a big deal, because my Windows 7 Home Premium 64-bit OEM product key is stuck at the bottom of my laptop.
  (4) my current copy of Windows 7 is activated by seeing my BIOS (I have a traditional BIOS, not a UEFI).  If I had to switch to Windows 8 and decide then I'd rather back in Windows 7, for example, a few months later, I'll be able to do that (I burned recovery of Windows 7 with the Toshiba utility disks, which I did), and Windows 7 will continue to activate by seeing my BIOS, even after the installation (and later remove) Windows 8?
  Thank you very much!

  I have a few questions about the Upgrade of Windows 8 offer for new computers.  I recently bought a Toshiba Satellite S855-S5268 of amazon.com, which came with Windows 7 Home Premium.  Toshiba already has a beta version of drivers and utilities for Windows 8 for the S855 on their Web site.

  (1) I bought my laptop in July of this year, and I've not yet registered for 8 Windows Upgrade offer with Microsoft.  Am I still eligible to receive the upgrade, if I sign up soon?

   

  Yes, the registration period is between June 2, 2012 to January 31, 2013.

  (2) if I buy the upgrade through this offer, I'll be able to download an ISO file so I can burn the installation media, or do I need to upgrade to Windows 7?

   

  Yes, the Upgrade Wizard of Windows 8 will allow you to create a bootable DVD or you can grab the ESD file and save it.

  (3) if I will be able to burn the installation media, I'll be able to erase my hard drive and do a clean install of Windows 8 (which I'd rather do, I have a lot of backups of my data).  I am aware that I would probably need to provide my product key Windows 7 Home Premium 64-bit OEM during the new installation, because it is an upgrade and not a full version; This isn't a big deal, because my Windows 7 Home Premium 64-bit OEM product key is stuck at the bottom of my laptop.

   

  Yes and there are better ways to reinstall Windows 8 without using the installation disc, you can use the reset and refresh.

   

   

  These steps will take you through refreshing your PC:

  · Press the Windows key + C on your keyboard to show the charms (if you use a touch screen: touch the right edge of your screen and drag your finger to the left)

  · Click settings

  · Click change PC settings

  · Click general in the left column

  · Under refresh your PC without affecting your files, click Start

  Then follow the instructions that will be provided on-screen to cool your PC.

  (4) my current copy of Windows 7 is activated by seeing my BIOS (I have a traditional BIOS, not a UEFI).  If I had to switch to Windows 8 and decide then I'd rather back in Windows 7, for example, a few months later, I'll be able to do that (I burned recovery of Windows 7 with the Toshiba utility disks, which I did), and Windows 7 will continue to activate by seeing my BIOS, even after the installation (and later remove) Windows 8?
   
  As long as you have a recovery disk which you should create or use the construction in the recovery partition, Yes, it will self activate.
  Thank you very much!

• Questions about the OEM upgrade repository 10.1.0.4 to 10.2.0.1 db in

  Hi all
  
  Since we installed the 10g grid control in Windows 2003 server who and the agent have been upgraded to 10.2.0.5 see below:
  
  D:\Oracle\Ora10g_GC\agent10g\BIN > emctl agent status
  Oracle Enterprise Manager 10g Release 5 Grid Control 10.2.0.5.0.
  Copyright (c) 1996, Oracle Corporation, 2009. All rights reserved.
  ---------------------------------------------------------------
  Agent version: 10.2.0.5.0
  Version of the WHO: 10.2.0.5.0
  Protocol version: 10.2.0.5.0
  Agent home: D:\Oracle\Ora10g_GC\agent10g
  File binary agent: D:\Oracle\Ora10g_GC\agent10g
  Agent process ID: 2460
  ---------------------------------------------------------------
  Agent runs but not ready
  
  The repository db (on the same server) stayed in 10.1.0.4 so we tried to upgrade this db. This is the step we did:
  
  (1) installed oracle 10.2.0.1 in a new oracle home.
  (2) listener configured in this new database using the port 1522
  (3) Ran pre upgrade util: utlu102i.sql
  (4) Ran oracle dbua new home
  
  Looks like that the upgrade is executed successfully with the exception of the configurations of EM.
  
  Name of the step name log file
  PreUpgrade.log pre successful upgrade
  Oracle Server Oracle_Server.log successful
  Oracle_Server.log Oracle Workspace Manager successful
  Post PostUpgrade.log successful upgrade
  EmConfigUpgrade.log Enterprise Manager Configuration Failed *.
  Generate the successful generateSummary.log summary
  
  My questions are:
  
  (1) what does this failure?
  (2) how can I fix this?
  
  Thank you very much for your help in advance,
  
  Shirley

  EM is not configured for this database

  Which points to the control of stand-alone database (dbconsole). I'm not so familiar with DBUA, it could be THAT DBUA try to configure default dbconsole. But you have not need of a database repository gridcontrol, still more, such a data base should not have a repository dbconsole. So you can ignore the error message.

  He is the agent who speaks with the WHO and the repository database, so you should follow the instructions in the present note metalink inform the agent about the changes:

  How to: change the listening Port of the database that contains the repository of grid control
  DOC - ID: 369997.1

  Werner

• I have a question about the ESXi upgrade using Update Manager...

  This is probably a stupid question, but I've never played and update ESXi using Update Manager.  We need to update ESXi ESXi 4.1 4.1 servers before vCenter 5.0 U1 from U2 (there is a known issue where the ESXi 4.1 servers receive the GROUP after upgrading vCenter to 5.0 U1).  We used HP ESXi image to install ESXi on our servers for new installations.  This image contains ESXi.1 U2 as well as the drivers of HP and CIM.

  4.1_U2_Oct_2011_ESXi_HD - USB-SDImgeInstlr_Z7550 - 00241.iso

  Can this same image HP ESXi 4.1 U2 that we used to install to new ESXi servers, be used to upgrade our 4.1 4.1 U2 ESXi servers using the Update Manager?  Or, upgrade package should be used for the upgrade?  Also, if an upgrade package must be used, is it OK to use one provided by VMware, or will be losing our HP specific drivers and CIM to do this?

  Thank you

  Hello

  You can import custom HP ESXi 4.1 U2 ISO in Update Manager (don't forget to use the latest version of June 2012, available here: https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=HPVM06) and update the hosts with her.

  In a second step, you can then import the last custom HP ESXi ISO 5.0 (available here: https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=HPVM09) and update the hosts again with her.

  To be on the current ESXi 5.0 patch level you finally apply the latest patches from VMware via the Update Manager.

  -Andreas

• Question about the intersection of paths / tapered

  Hi all

  I have a question that I can't solve, and I thought that this would be the place to ask. I'm knowledgeable enough in Illustrator, but I'm self-taught so there may be things that I missed along the way and is the one who bugged the heck out of me.

  When you create a vector image from scratch and using the tools, I'm running on a problem of cleanliness at the intersection of the paths and the addition of pre-existing lines of paths...

  Here is a picture to show my frustration...

  

  I need advice on how to clean the lines like this? I can taper the end of the paths? is it possible to erase the lost end? How to change the angle of the end of the path? Any help of this solution would be beneficial.

  Thank you!

  enorthem,

  So, essentially, you think that the best thing to do for this angle is to create two separate parallel tracks and reteint against each other to imitate the desired thickness?

  It would be easier to object > path > Outline Stroke as suggested by Monika in the first post. My suggestion doubling path was a way to avoid describing them and creating the transition with only the contours.

  You can follow these steps to get precisely fitting/match, double or even triple, paths overlapping to avoid gaps:

  For a path to double:

  (1) create the upper and lower path with a race weight which is slightly more than half the projected apparent thickness and a length that is a bit large;

  (2) object > path > offset by a value equal to the difference between the projected apparent thickness and weight of the race;

  (3) with the scissors tool, cut the path offset to the ends of the piece to be used, and delete the rest;

  (4) adjust the lengths by clicking the scissors tool, capture off the coast of the surplus as required.

  For a triple path:

  (1) create the aisle with a race weight which is a bit more than a third apparent Thickness planned and a length that is a bit large;

  (2) object > path > offset by a value equal to half the difference between the projected apparent thickness and weight of the race;

  (3) with the scissors tool, cut the path offset to the ends of the two parties to use and delete the rest (short segments of straight lines between the two).

  (4) adjust the lengths by clicking the scissors tool, capture off the coast of the surplus as required.

  that this would make it easier would be if there was a way to add a point to a path and make it extend horizontally in a way completely different, but hey, me if I'm wrong, I don't think that is possible.

  Nothing to fix.

• Misunderstand the CS5 upgrade path.

  I have CS3 Design Premium. Try to install the upgrade to CS5, (just Photoshop). But "describing a product is not found. 10.6.4

  If you have more, you MUST upgrade ALL of the SUITE.  You can't pass the response to a single request.

  Contact Adobe customer service for instructions on how to request a refund, what you can do during the first 30 days.

• Question about the BIOS upgrade for Windows

  I tried to update my BIOS M200 of 1,20 to 1,80 using the Windows version. Error is telling me that I am not an authorized user. I am local and all administrator requirements ar fullfilled readme.
  What can be the problem? I don't want to use the upgrade disk.
  Thank you
  T

  Hello

  As far as I know you can only update the BIOS with the compatible reader.
  Check this Toshiba document which drives are compatible
  http://support.toshiba-tro.de/KB/40/TSB4800R70001R01.htm

  On the procedures of recovery on different units:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/FAQ.jsp?service=EU&FID=TRO0000000b07

  Good bye

• A few questions about the upgrade on Satellite A300-144

  Sorry for the typos, English is not my mother tongue.
  I want to ask some questions about the upgrade of a300-144.

  * Some info first.*

  CPU: T2370 ([http://ark.intel.com/products/34445/Intel-Pentium-Processor-T2370-1M-Cache-1_73-GHz-533-MHz-FSB]).
  Chipset: GM965 ([http://ark.intel.com/products/29821/Intel-82GM965-Graphics-and-Memory-Controller]).

  * Questions.*

  1. my frequency of laptop memory at 533 MHz, supports 667 MHz memory controller, memory modules can work at 667 MHz. Is - this because CPU FSB 533 MHz frequency and new processor at 667/800 MHz FSB will fix it or it is hardcoded in the BIOS?

  2 Intel said that the size of max memory for my chipset is 4 GB (2 x 2 GB), but Toshiba says that only 2 GB (2 x 1 GB), who is right?

  3 I know, taken of my CPU is μFCPGA-478 aka socket P, max FSB 800 MHz, max 35 W TDP, so T9500 ([http://ark.intel.com/products/33918/Intel-Core2-Duo-Processor-T9500-6M-Cache-2_60-GHz-800-MHz-FSB]) is a compatible processor or there are some limitations in the BIOS?

  > 1. My frequency of laptop memory at 533 MHz, supports 667 MHz memory controller, memory modules can work at 667 MHz. Is - this because CPU FSB 533 MHz frequency and new processor at 667/800 MHz FSB will fix it or it is hardcoded in the BIOS?

  The speed of the memory is related on the material. This means that the FSB is responsible for the limitation.
  If the FSB would allow support 667 MHz then the memory would also at this speed.

  > 2. Intel says that the size of max memory for my chipset is 4 GB (2 x 2 GB), but Toshiba says that only 2 GB (2 x 1 GB), who is right?
  The memory depends on the chipset. So if the chipset supports 4 GB of RAM, you should be capable of this move to 4 GB of RAM

  > 3. I know, my CPU is? FC-PGA-478 aka socket P, max FSB 800 MHz, max 35 W TDP, so T9500 (http://ark.intel.com/products/33918/Intel-Core2-Duo-Processor-T9500-6M-Cache-2_60-GHz-800-MHz-FSB) will be a compatible processor or there are some limitations in the BIOS?

  It might be possible that the new processor would be fully supported by the BIOS, but in most cases it should not be a problem if the chipset would support the new processor.
  But as far as I know the upgrade of the CPU is not supported by Toshiba or any other manufacturers of portable and its your own risk to run laptop with the new processor.

• Questions about the upgrade to the 4.0 unit

  Hi all

  I have a few questions before the server upgrade to 4.0 to 3.1.3 and install a new Server 4.0. We currently have 7 servers unit all current 3.1.3 running with digital networks. We are planning to upgrade a Server 4.0 and install a new server with 4.0 costs. This is the beginning of the upgrade of the entire company and my questions are the following:

  1 will update the AD schema during the installation/upgrade to 4.0 problems with the 3.1.3 other servers?

  2 since there isn't that one account of the unit currently with the 3.1.3 configuration, creating 4 new accounts unit cause any problem or should I / can I use the current to the unityadmin the unit account or one of the other 3 new accounts? I would like to start over again with 4 new accounts and not use the current service account and migrate to new accounts during the upgrade other servers.

  3. is there a problem to have 3.1.3 servers running jointly with 4.0 servers in general?

  My impression is that this is very well that I would no problem to start the 3.1.3 servers alongside with 4.0 servers, there should be no problem to use new accounts of the unit and this update of the AD schema should not be a problem for the old servers, but I want to make sure before doing the update/install.

  Oh, it's all run with Exchange 2000.

  Thanks for your time!

  Keith

  (1) it is backward compatible

  (2) creation of 4 new accounts will be fine.

  (3) you can run 3.1 (x) alongside with 4.x

  H. M.

• Questions about the export of PDF with India CS5.5

  Hey all,.

  A few questions about the export to PDF of the most recent version of India.

  First of all, I noticed it seems to take much more time to access a PDF file. Any suggestions about how to speed up the process? It took 8 minutes to generate a PDF low resolution (for printing) of a document of 24pp with placed images and vector graphics. Wow, that's a long wait, especially for evidence.

  Second, the background task... If I get it will make this PDF of 8 minutes and then more work on the document, which is exactly in the PDF? Usually, I have save before making a PDF or printing. Thus, the latest version is saved which will be in the PDF?

  (Either incidentally, this ability to work on the doc while generating a PDF file seems kind of weird. Generally, we do a PDF for proofing, or even for printing, when any changes have been made and that everything is "final". Therefore, I see no advantage in being able to work on my document while it is making a PDF file, I am probably once your revisions for the moment. I must say that I like the progress bar that you get when you perform an interactive PDF, as you know that you can not work on the document when it is on the screen...)

  Thank you as always.

  Good, people. Wanted to just follow this and post my results. It turns out that the problem is somewhere in the Illustrator file. I never had the time to guess what work plan was the culprit. Other India files PDF files is transparent and not a lot of time.

  No resolution, unfortunately, just good to know that it is not all India files on my system. Phew!

  THANK YOU for your advice.

• A few questions about the Satellite A100 PSAANE

  Hi friends,

  I have a Toshiba Satellite A 100 - PSAANE with Vista Home Basic preinstalled in it.
  Now, I have a few questions... I mention below: -.

  (1) if I want to format my laptop, I need a CD to install for Vista Home basic... then I don't have this Toshiba CD when I bought the laptop. So how do? question: How can I format it?

  (2) can I change my Vista Home Basic to windows XP? I think it's much faster than this one. is it advisable?

  (3) I have a GB of RAM in the laptop. Increase the RAM? I think that my laptop has become to slow down. is it advisable?

  (4) and on my screen, everytime I try to change my profile screen to windows Classic view, my screen begins to blink. and after a while, the screen turns off. So I can't change that. I put the color scheme of windows vista only. What to do about that?

  Please help me friends. Thanks in advance.

  Kind regards
  Perkins

  Hello

  Here, a few questions about the number:

  (1) usually, you should get the Vista Toshiba Recovery DVD. If you didn t receive this DVD then you can order it here https://backupmedia.toshiba.eu/landing.aspx or you could install the disc of Microsoft Vista.

  (2) of course, you can do this. I think that Win XP drivers can be downloaded from the Toshiba driver page.

  (3) Yes, you can upgrade the RAM. For more information, see your manual or search on this forum for similar topics

  (4) maybe it s associated with the graphics driver. Check if you can update. I would recommend additional check if you are using the latest version of the BIOS

  Welcome them

• Question about the new Yoga 10 HD +.

  Hello

  A few questions about the new Yoga 10 HD + that I hope you can answer.

  I bought the former model, last year. Love the design and long battery life, but a few major questions made me return.

  • Somewhere that I've read that it can not read NTFS on USB so I guess that's the same thing with a NTFS formatted microSD card?
  • Can it read exFAT formatted microSD cards?
  • Anyone who has questions about the audio via bluetooth?
    (I know that BT is not exactly High End HiFi but the old 10 Yoga for some obscure reason - most likely a driver problem which nobody cared to fix - rang * very * worst with visibly distortion while both my phone and a Tablet noname cheap I have zero about fidelity - any of my devices bluetooth audio) I tried aptX or not)

  So to avoid buying it back it also I really I would like to see if I can get my questions answered before buy you.

  While I love the form factor and long term issues above are only two Mayor dealbreakers for me. Bad audio quality = no joy listen to spotify, local etc. MP3s. not of NTFS or exFAT = some great movies.

  My old noname android Tablet really could use an upgrade so I'm really curious it may be, or I should watch the competition and will be form factor and battery LIFE.

  Thanks in advance.

  EDIT:

  If it does not support NTFS or exFAT on microSD card have someone at - he tried ext3 or ext4?

  I mean with Linux Android root, it should be a no-brainer to support at least when it comes to royalties unlike NTFS or exFAT where it * might * have some trouble with Microsoft.

  I used a USB through a USB OTG cable. NTFS or exFAT have been recognized by the Tablet PC. FAT32 is seems to be the preference.

• Question about the differences in commands

  Hey guys -.

  I just had a few questions about the differences between orders that seem to perform the same function.  Can you let me know if an order is more preferable to the other and what the difference is.  I would really appreciate it as it I currently practice some INE laboratories and I see that orders change from lab to lab.  Thanks advance!

  1. When you write a static NAT for specific host 1 - is - this important if I understand the 32 subnet?

  EX: static (inside, outside) 1.1.1.1, 2.2.2.2 VS static (inside, outside) 1.1.1.1 2.2.2.2 netmask 255.255.255.255

  2. when I'm setting up a router as a CA server and it is necessary to "export" the key, whatever my method of exporting the key?  If so, in which method call for which solution?

  EX: key export cryptographic rsa ciscox pem URL nvram: cisco VS. exporting key 3des cryptographic ciscox pem 3des rsa terminal cisco

  3. If I have to mark a packet with a DSCP of X value, matter if I use the 'set dscp' VS 'set ip dscp?  If so, what is the difference?

  FXY

  Policy-map X

  class X

  the dscp X value

  VS

  Policy-map X

  class X

  X ip dscp value

  I guess pertaining to 2, if i was speaking in terms of from a cisco router to another cisco router - would terminal be acceptable?
  
  

  Yes, the "Import cryptographic key" command can take a url and also from the terminal entrance. In this terminal case wil is much easier.

  --
  Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
  http://www.Kiva.org/invitedBy/karsteni

• The specific question about the placement of an image into text.

  Hello, I had a question about the placement of an image into text.

  I did the contours to create text to place the image inside. My text is 5 words and two lines inside the box.

  When I do create contours he gives me 2 transparent route separate layers for the top and the bottom line.

  How will I be able to do that in a single layer of compound to place image that expands to the two lines?

  First of all, there are two ways of describing the type. The default value creates anchored objects. You want a separate object, so hold down the Option/Alt key when you create outlines. Drag the new contours to separate the text block.

  It is useful to open the layers panel and view the contents of the layer. You have created a group which consists of two transparent traces. In the layers panel, expand the layer so you can see the structure. Shift-select the two transparent traces. (Make sure that the group is not selected.)

  

  Then choose object > tracks > make a compound path. This makes the two transparent tracks into one. Then, you can place or paste into the single compound path.

• A few Questions about the creative cloud

  I read that the Creator Cloud connection will be released in the coming weeks, which is great. I have a few questions about the download file and the creative connection program of cloud.

  I have a file which I will download. The contents of this file will be updated periodically locally. I want to do the files in this folder to stay updated between my desktop and laptop. The Creative Cloud connection program will be able to do?

  If a file is changed, which is already in the cloud program will recognize the change and stay the cloud?

  I guess just a little more information on exactly what will be the program Creative Connection cloud would be nice.

  On the topic of storage I will be able to upgrade the standard 20 GB of storage that is available when / if needed? And how much will that be?

  Another question:

  When Lightroom 4 will be available via CC and why is it not available when it was released?

  Creative Cloud connection will keep files between your desktop and the Web site synchronized. You will be able to add, edit and delete files from each end and that the changes are reflected in both.

  To see the connection creative cloud in action, you can watch this video of evangelist Paul Trani Adobe http://tv.adobe.com/watch/adobe-creative-suite-6-creative-cloud-launch-week/adobe-creative - cloud - tour-/.

  There will be a way to get more than 20 GB of storage. Adobe Creative Cloud http://www.adobe.com/products/creativecloud/faq.html FAQ has a question and an answer about it down:

  Buy extra creative Cloud storage?

  Additional storage will be available for purchase later in 2012. If you have reached your storage limit, contact Adobe Customer Service.

  Lightroom 4 will be available in a few weeks. Jeff Veen also tweeted this https://twitter.com/#! / veen/status/200810541550288896. Other Articles of Jeff on what comes to the Adobe Creative cloud here in his blog of Adobe http://blogs.adobe.com/creativecloud/coming-soon-to-creative-cloud/.