Question about the MERGE statement

Similar Questions

• Question about the merger of the RPD

  Hello

  I'm tring to full merger OBIEE 11 g RPD. There are 2 SPR: a.rpd & b.rpd

  a.RPD a domain under the form ABC & b.rpd a field like PQR, when I do a full merger, it does not show the two subject area.

  Can someone tell me problem. There is no conflict at the time of the merger as the two disciplines are different.

  Thank you

  Hello

  Create an empty RPD.

  Now open the A.rpd and click on merge in the repository.

  Now select the original White SPR and updated the RPD as B.rpd.

  You will get the merged RPD.

  It has worked well for me.

  Let me know if still face you the problem.

  Thank you

  Kathia

• Question about the update statement

  Hi all
  
  
  UPDATE table_name
  SET Column1 = value, column2 = value2
  WHERE condition;
  
  I have an update like this statement. What happens when I run the above statement, when there is no column named Column2 in the table? If it creates a column named column2 and value2 using?
  
  Instead should first create a new column named Column2 in the table first and then run this update statement?
  
  Please, someone good to explain.

  Hi, this statement (it is a dml statement) will give an error, because the Column2 does not exist in the table. You must add the Column2 by an alter (ddl statement) statement. Then, you can try to execute your statement.

  Kind regards
  Saby

  Published by: 793420 on September 7, 2010 14:48

  Published by: 793420 on September 7, 2010 14:48

• Question about the merger of the clips.

  I don't even know if what I'm trying to do so would be considered fusion of clips. Let me explain what I'm trying to do.

  I'm filming a car crashed to a horror movie that I do with friends. I have two clips. The first clip is a car running a red light, just directly through it. The second clip is an automobile coming from a different direction (the side where the light is green) without the car rolling red light in the shot. The camera is in the same place for two shots. I want it to look at the car in the red light is about to get T-boned in the second car.

  Is it possible that I can read the clip of the first car running red light and playing the second clip with the car coming from the other sense at the same time? There is no impact. The clip black Cup just before the first car gets T-boned.

  If this is possible, how do you? And is there a special word for this? It is very difficult to describe what I'm picturing in my head. I hope someone can help.

  Thank you.

  Put a video on track 1, put the second video on track 2 with a linear wipe added in the place of the collision. Add a border of feathers to the wipe to help hide the join.

• Question about the transition from string values to the Partition clause in a merge statement

  Hi all
  
  I use the code to update the data of specific secondary partition using oracle merge statements below.
  
  I'm getting the name of the secondary partition and pass this string to the secondary partition clause.
  
  The Merge statement is a failure, indicating that the specified secondary partition does not exist. But the partition under do exists for the table.
  
  We use a server Oracle 11 GR 2.
  
  Here is the code I use to fill in the data.
  
  declare
  ln_min_batchkey PLS_INTEGER;
  ln_max_batchkey PLS_INTEGER;
  lv_partition_name VARCHAR2 (32767).
  lv_subpartition_name VARCHAR2 (32767).
  Start
  
  FOR m1 IN (SELECT (year_val + 1) AS year_val, year_val AS orig_year_val)
  FROM (SELECT DISTINCT
  To_char (batch_create_dt, 'YYYY') year_val
  OF stores_comm_mob_sub_temp
  ORDER BY 1)
  ORDER BY year_val)
  LOOP
  lv_partition_name: =.
  () scmsa_handset_mobility_data_build.fn_get_partition_name
  nom_table_p = > 'STORES_COMM_MOB_SUB_INFO ',.
  p_search_string = > m1.year_val);
  
  FOR m2
  IN (SELECT DISTINCT
  'M' || To_char (batch_create_dt, 'MM') AS month_val
  OF stores_comm_mob_sub_temp
  WHERE TO_CHAR (batch_create_dt, 'YYYY') = m1.orig_year_val)
  LOOP
  lv_subpartition_name: =.
  () scmsa_handset_mobility_data_build.fn_get_subpartition_name
  nom_table_p = > 'STORES_COMM_MOB_SUB_INFO ',.
  p_partition_name = > lv_partition_name,
  p_search_string = > m2.month_val);
  
  DBMS_OUTPUT. Put_line (' lv_subpartition_name = > ' | lv_subpartition_name |' and lv_partition_name = > ' | lv_partition_name);
  
  IF lv_subpartition_name IS NULL
  THEN
  DBMS_OUTPUT. Put_line ("to the INTERIOR of FI = > ' |") M2.month_val);
  INSERT INTO STORES_COMM_MOB_SUB_INFO (T1)
  T1.ntlogin,
  T1.first_name,
  T1.last_name,
  T1.job_title,
  T1.store_id,
  T1.batch_create_dt)
  SELECT t2.ntlogin,
  T2.first_name,
  T2.last_name,
  T2.job_title,
  T2.store_id,
  T2.batch_create_dt
  OF stores_comm_mob_sub_temp t2
  WHERE TO_CHAR (batch_create_dt, 'YYYY') = m1.orig_year_val
  AND'M '. To_char (batch_create_dt, 'MM') =
  M2.month_val;
  ELSIF lv_subpartition_name IS NOT NULL
  THEN
  DBMS_OUTPUT. Put_line (' INSIDE ELSIF = > ' | m2.month_val);
  MERGE (SELECT *)
  OF stores_comm_mob_sub_info
  SUBPARTITION (lv_subpartition_name)) T1
  USING (SELECT *)
  OF stores_comm_mob_sub_temp
  WHERE TO_CHAR (batch_create_dt, 'YYYY') =
  M1.orig_year_val
  AND'M '. To_char (batch_create_dt, 'MM') =
  M2.month_val) T2
  WE (T1.store_id = T2.store_id
  AND T1.ntlogin = T2.ntlogin)
  WHEN MATCHED
  THEN
  GAME UPDATE
  T1.postpaid_totalqty =
  (NVL (t1.postpaid_totalqty, 0))
  (+ NVL (t2.postpaid_totalqty, 0));
  T1.sales_transaction_dt =
  LARGEST)
  NVL (t1.sales_transaction_dt,
  T2.sales_transaction_dt),
  NVL (t2.sales_transaction_dt,
  T1.sales_transaction_dt)),
  T1.batch_create_dt =
  LARGEST)
  NVL (t1.batch_create_dt, t2.batch_create_dt),
  NVL (t2.batch_create_dt, t1.batch_create_dt))
  WHEN NOT MATCHED
  THEN
  INSERT (t1.ntlogin,
  T1.first_name,
  T1.last_name,
  T1.job_title,
  T1.store_id,
  T1.batch_create_dt)
  VALUES (t2.ntlogin,
  T2.first_name,
  T2.last_name,
  T2.job_title,
  T2.store_id,
  T2.batch_create_dt);
  END IF;
  END LOOP;
  END LOOP;
  
  COMMIT;
  
  end;
  /
  
  
  
  Really appreciate your input here.
  
  Thank you
  MK.

  Hello

  You can use "immediate execution" what works.

  Thank you

• Error in the Merge statement using dblink

  Hello

  I am facing the following error when you use the merge statement using the dblink.

  ORA-02069: global_names must be set to true for this operation parameter.

  I can use the same dblink in my select insert and update statements but when I try to use merge then he invites the error said, is also not any syntax error as same statement can be used on the same tables of database instead of dblink.

  Please suggest any help will be much appreciated.

  Thanks in advance

  Hi Aqeel

  If insert and update statements work well through links db, then it should not be a problem with the merge statement. But if you are faced with the question, so please check the entire sql statement with tnsnames on both sides. Please share the tnsnames for the two dbs with dblink ddl.

  Concerning

  Jihane Narain Sylca

• A few Questions about the advanced Actions window

  Hello

  I have a few questions about the progress of the Actions (using the version of track CP7)

  1. What is the function of the action to "continue?"   Out of the peak action and advance the playback cursor?

  2. What does mean this comment "Nested calls to action advanced is a nice improvement."? Is the advanced decision at the top of a page of action tabs?

  3. What is the function of the option "custom" in the IF statement - "preform action if - custom", it doesn't seem to do anything for me?

  4. where can I get information about the timeline / playhead interaction with advanced actions, i.e. where the playhead is going again at the beginning of the slide. slide custom question - display button, e.g. verification of responses, comments - when all the objects are at the beginning of the timeline. I'm looking more for the read head of infromation functionality rather than how to implement this type of question.

  Thank you

  Donal.

  Continue: If an advanced standard action is triggered by a button, this will not trigger the playback head. If you want out, you can use continues. Continue can also be a choice in a conditional action, when one orders branching has nothing to special, but in advance. Continuous is also the "dummy" statement/command (this is the official name of a line in the dialog box advanced actions) If a statement has become unusable due to some reasons, it will be replaced by continue

  There is no nested call stocks advanced possible right now, one of my many feature requests. It would be sort of a subroutine that you can use over and over again, instead of having to create each time when necessary.

  A decision is one of the conditions to be an advanced conditional action. They allow to create more complex actions, as a loop or arrays are not possible. All decisions are executed in sequence and always.

  Custom: is a combination of or but it is rather limited, because you cannot use parentheses.

  I guess you'd better visit my blog if you want to learn more about the advanced actions.

  http://blog.lilybiri.com/

  I also did several Webinars on stocks advanced, last this afternoon (on the sharing of the actions) for Adobe. They are all available on request.

  Lilybiri

• Question about the interruptions and priming

  Hello

  I had a few questions about the startup and interruptions in a virtualized environment

  Assuming that, plenty of virtualization (no material assistance to virtualization of memory ).

  1 initialization: in an ordinary PC, the boot process starts with the BIOS, to expansion ROM, back to the BIOS and MBR secondary boot record, then grub (is it) and finally the operating system. In a virtualized environment with VMM running directly on top of hardware (Native VMM), how is the initialization of the different process, as I understand it takes BIOS-> Expansion ROM - > BIOS-MBR-> other record secondary-> VMM-> OS--> applications >. Am I right on that?

  2 breaks: VMM examines the source interruptions prior to the interruption, so in a multicore environment, assuming a 2 processor core, how the VMM decides on the kernel for which the interruption in intended, prior to shipment of the interruption. Interruptions are tag ID, said core ID?

  Thanks in advance

  -SC

  sidc7 wrote:

  1 initialization: in an ordinary PC, the boot process starts with the BIOS, to expansion ROM, back to the BIOS and MBR secondary boot record, then grub (is it) and finally the operating system. In a virtualized environment with VMM running directly on top of hardware (Native VMM), how is the different boot process, if I understand correctly to -> BIOS-> Expansion ROM BIOS-> MBR-> other documents-->--> OS--> requests VMM. Am I right on that?

  It is simplistic but essentially correct.  A metaphor would be a little better thinking that the hypervisor/vmm is an operating system, except that the process on this operating system are requests or comments OSes.  If the BIOS-> OPROM-> BIOS-> MBR-> hypervisor-> init process of the hypervisor-> reviews of fork () s operating systems.  This can become blurred by the design choices (for example Xen/Hyper-V init start a coded parent hard partition that makes hypercalls privileged to fork() guest OSes; ESXi init runs a very limited subset of applications directly on the hypervisor and ESX Classic is somewhere between these approaches).

  There is a subtle distinction between "hypervisor" and "www."  The "hypervisor" is the operating system of single root (e.g. ESX) who interacts directly with the hardware and has access to everything; a hypervisor is not to be used to run virtual machines.  When we talk about a "hypervisor", the tendency is to describe something which is a BONE (although usually a minimal OS designed only to run virtual machines).  The "www" is the layer that allows a virtual machine run: it provides the interposition, virtualization and emulation services and can be plural (for example a vmm by guest operating system).  Architecture of VMware deal with these two separate components, while most other virtualization platforms merge the two.

  sidc7 wrote:

  2 breaks: VMM examines the source interruptions prior to the interruption, so in a multicore environment, assuming a 2 processor core, how the VMM decides on the kernel for which the interruption in intended, prior to shipment of the interruption. Interruptions are tag ID, said core ID?

  Strictly speaking, the interruption is not transmitted to a guest operating system - receives the hypervisor (or rather the VMM it transmits to the hypervisor), the hypervisor drivers interpret the interruption (for example reading package of NIC, I/O process of HBA, the timer tick completion), then after a new appropriate break in the guest OS.

• A few questions about the difference between the Satellite P70, L70, S70

  Hello, I have a lot of questions about the P70, L70, S70 series that come with a 1920 x 1080 panel.

  (1) what are the differences between the L70 and S70 series? With the exception of the RAM and HARD drive capacity, books seem pretty identical.

  (2) P70, L70, S70 doesn't support a 2nd HARD drive or it's just the P70 series that support?

  (3) all the three (P70, L70, S70 series) come with the same TFT panels?

  (4) of the above series, which supports mSata?

  (5) all the model of each series are delivered with support from mSata? For example, it could be that L70 - a - 13 m supports mSata is not the case of the L70-a-146?

  (6) all the foregoing, are delivered with a S - ATA II or III S - ATA interface?

  (7) who is the best of these series listed? I'm trying to understand what makes the big difference of S70 to P70 except for the envelope for example.

  Thank you in advance.

  > (1) what are the differences between the series L70 and S70? With the exception of the RAM and HARD drive capacity, books seem pretty identical.

  What models Sat L70 and S70 do you mean exactly? There are different L70-xxx-xxx and S70 models on the market that supports different hardware specifications.

  (> S70 2) P70, L70, support a 2nd drive HARD or is - it just the series P70 that support?
  As you can see in this [Sam P70 HDD replacement document, | http://aps2.toshiba-tro.de/kb0/CRU3903II0000R01.htm] the P70 series supports the 2nd drive Bay HARD, BUT even if there is a 2nd HARD drive Bay, this does not mean that you can use the 2nd HARD drive. In the case where the 2nd HARD drive Bay are equipped with HARD drive connector, you can use the 2nd HARD drive

  I also found the [Sam L70/S70 HDD replacement | http://aps2.toshiba-tro.de/kb0/CRU3703HG0000R01.htm] the document on the Toshiba page and there I see this 2nd HARD drive Bay is not available

  (> 3) all three (P70, L70, S70 series) come with the same TFT panels?
  See point 1). Different P70, L70, S70 models were equipped with different material parts.

  (> 4) of the series above, which takes in charge mSata?
  As far as I know that some P70 models are equipped with an mSATA SSD of 256 GB.

  (> 5) do all the model of each series are delivered with support mSata? For example, it could be that L70 - a - 13 m supports mSata is not the case of the L70-a-146?
  See point 4) not all models supports the same hardware specifications

  (> 6) all of the above, come with a S - ATA II or III S - ATA interface?
  I don t think that SATA III is supported. I guess it would be SATA II

  (> 7) which is the best of these series listed? I'm trying to understand what makes the big difference of S70 to P70 except for the envelope for example.
  Not easy to answer because there are too many models released in Europea.
  And not all models are available in each country. So I guess you will have to look for the models that have been released in your country.

• A few questions about the upgrade on Satellite A300-144

  Sorry for the typos, English is not my mother tongue.
  I want to ask some questions about the upgrade of a300-144.

  * Some info first.*

  CPU: T2370 ([http://ark.intel.com/products/34445/Intel-Pentium-Processor-T2370-1M-Cache-1_73-GHz-533-MHz-FSB]).
  Chipset: GM965 ([http://ark.intel.com/products/29821/Intel-82GM965-Graphics-and-Memory-Controller]).

  * Questions.*

  1. my frequency of laptop memory at 533 MHz, supports 667 MHz memory controller, memory modules can work at 667 MHz. Is - this because CPU FSB 533 MHz frequency and new processor at 667/800 MHz FSB will fix it or it is hardcoded in the BIOS?

  2 Intel said that the size of max memory for my chipset is 4 GB (2 x 2 GB), but Toshiba says that only 2 GB (2 x 1 GB), who is right?

  3 I know, taken of my CPU is μFCPGA-478 aka socket P, max FSB 800 MHz, max 35 W TDP, so T9500 ([http://ark.intel.com/products/33918/Intel-Core2-Duo-Processor-T9500-6M-Cache-2_60-GHz-800-MHz-FSB]) is a compatible processor or there are some limitations in the BIOS?

  > 1. My frequency of laptop memory at 533 MHz, supports 667 MHz memory controller, memory modules can work at 667 MHz. Is - this because CPU FSB 533 MHz frequency and new processor at 667/800 MHz FSB will fix it or it is hardcoded in the BIOS?

  The speed of the memory is related on the material. This means that the FSB is responsible for the limitation.
  If the FSB would allow support 667 MHz then the memory would also at this speed.

  > 2. Intel says that the size of max memory for my chipset is 4 GB (2 x 2 GB), but Toshiba says that only 2 GB (2 x 1 GB), who is right?
  The memory depends on the chipset. So if the chipset supports 4 GB of RAM, you should be capable of this move to 4 GB of RAM

  > 3. I know, my CPU is? FC-PGA-478 aka socket P, max FSB 800 MHz, max 35 W TDP, so T9500 (http://ark.intel.com/products/33918/Intel-Core2-Duo-Processor-T9500-6M-Cache-2_60-GHz-800-MHz-FSB) will be a compatible processor or there are some limitations in the BIOS?

  It might be possible that the new processor would be fully supported by the BIOS, but in most cases it should not be a problem if the chipset would support the new processor.
  But as far as I know the upgrade of the CPU is not supported by Toshiba or any other manufacturers of portable and its your own risk to run laptop with the new processor.

• Question about the recovery partition

  Hello.

  I have a question about the recovery of HARD drive partition.

  If I do the operation to clear the hard disk option in the wizard it will remove * all * or it will keep my partition recovery in this way I can come back later. I want to know because I would like to put on a different OS.

  I know he said he would, but caution in the PDF, I found it says that on a normal recovery too (that he would remove each partition) and I'm a little confused about how the recovery actually worked.

  Thank you.

  Hey Buddy,

  To be honest I n don't know what you mean exactly with this option to erase.

  In General, Toshiba Recovery disk will wipe your entire HDD to restore factory settings correctly. This means that if you start from that disk and follow the instructions on the screen, everything will be removed.

  In addition, the recovery disk doesn t create a recovery partition. It is not available. Disk copy just the files on the second partition in folder HDDrecovery to start an installation of HARD drive recovery.

• A few questions about the Satellite A100 PSAANE

  Hi friends,

  I have a Toshiba Satellite A 100 - PSAANE with Vista Home Basic preinstalled in it.
  Now, I have a few questions... I mention below: -.

  (1) if I want to format my laptop, I need a CD to install for Vista Home basic... then I don't have this Toshiba CD when I bought the laptop. So how do? question: How can I format it?

  (2) can I change my Vista Home Basic to windows XP? I think it's much faster than this one. is it advisable?

  (3) I have a GB of RAM in the laptop. Increase the RAM? I think that my laptop has become to slow down. is it advisable?

  (4) and on my screen, everytime I try to change my profile screen to windows Classic view, my screen begins to blink. and after a while, the screen turns off. So I can't change that. I put the color scheme of windows vista only. What to do about that?

  Please help me friends. Thanks in advance.

  Kind regards
  Perkins

  Hello

  Here, a few questions about the number:

  (1) usually, you should get the Vista Toshiba Recovery DVD. If you didn t receive this DVD then you can order it here https://backupmedia.toshiba.eu/landing.aspx or you could install the disc of Microsoft Vista.

  (2) of course, you can do this. I think that Win XP drivers can be downloaded from the Toshiba driver page.

  (3) Yes, you can upgrade the RAM. For more information, see your manual or search on this forum for similar topics

  (4) maybe it s associated with the graphics driver. Check if you can update. I would recommend additional check if you are using the latest version of the BIOS

  Welcome them

• Re: Several questions about the recovery of the Satellite L750 features

  I have several questions about the recovery of Satellite L750 features available to it. Any help and answers would be useful.

  (1) when I started the laptop first, he asked me to create a recovery CD incase I need to reinstall the operating system. But he also said that he built in the recovery partition, so therefore, I have to make a recovery cd or not?

  (2) will be the recovery CD is exactly the same as the recovery on the system partition?

  (3) is the partion of CD or recovery includes all the integrated software pre-installed with the laptop?

  (4) also in the device manage management it shows watch partion recovery but it is empty, is it true?

  (5) in the second partition (drive D) system, he has a record with what looks like the recovery of files and folders. Is it safe to move/remove it?

  Hello

  I'll try to provide answers:
  1 - to ensure that everything works perfectly you don t need these discs, but if something goes wrong with the HARD drive you will not be able to do anything. When you have the recovery DVDs, you will still be able to install the recovery image and once again the factory settings. So my advice to you is: create these discs as soon as possible. Use only on DVD-R media and buy products of high quality (TDK or Verbatim).
  2 - Yes.
  3 - Yes.
  4 - No. Don t be confused with this.
  5. in a first time create restore DVD, and later you can do what you want. I put t know which files mean you but don t touch anything before that of the recovery disks to be created.

  In the past, many people have been experimenting with the structure of HARD drive and partitions and later was surprised when installing disk recovery HARD has been damaged. Don t make the same mistake.

  If you have any other questions you are welcome.

• Question about the new Yoga 10 HD +.

  Hello

  A few questions about the new Yoga 10 HD + that I hope you can answer.

  I bought the former model, last year. Love the design and long battery life, but a few major questions made me return.

  • Somewhere that I've read that it can not read NTFS on USB so I guess that's the same thing with a NTFS formatted microSD card?
  • Can it read exFAT formatted microSD cards?
  • Anyone who has questions about the audio via bluetooth?
    (I know that BT is not exactly High End HiFi but the old 10 Yoga for some obscure reason - most likely a driver problem which nobody cared to fix - rang * very * worst with visibly distortion while both my phone and a Tablet noname cheap I have zero about fidelity - any of my devices bluetooth audio) I tried aptX or not)

  So to avoid buying it back it also I really I would like to see if I can get my questions answered before buy you.

  While I love the form factor and long term issues above are only two Mayor dealbreakers for me. Bad audio quality = no joy listen to spotify, local etc. MP3s. not of NTFS or exFAT = some great movies.

  My old noname android Tablet really could use an upgrade so I'm really curious it may be, or I should watch the competition and will be form factor and battery LIFE.

  Thanks in advance.

  EDIT:

  If it does not support NTFS or exFAT on microSD card have someone at - he tried ext3 or ext4?

  I mean with Linux Android root, it should be a no-brainer to support at least when it comes to royalties unlike NTFS or exFAT where it * might * have some trouble with Microsoft.

  I used a USB through a USB OTG cable. NTFS or exFAT have been recognized by the Tablet PC. FAT32 is seems to be the preference.

• I have a question about the time machine. I recently updated my Quicken 2015 and there was something wrong with the update. Can I go back in just the Quicken file and restore it until I downloaded the update do I have to restore the entire

  I have a question about the time machine. I recently updated my Quicken 2015 and there was something wrong with the update. Can I come back in all the Quicken file and restore from time Machine before I downloaded the update to do, I need to restore the entire computer?

  Yes, you can just restore this file or application. Use Time Machine to back up or restore your Mac - Apple Support