Question about the .vmx file created on ESXi

Similar Questions

• Question about the password file

  Good afternoon
  
  In document s/n 2 days, she says:
  
  >
  When you call DBCA as part of the installation procedure for Oracle, DBCA database
  create a password with a single input file: the user SYS.
  >
  
  I created the database using DBCA and it must have created a file password for me since I was able to connect to the database remotely.
  
  The question is: I can't locate the created password THAT DBCA, I don't know what his name. Can someone give me the name of THAT DBCA is using the password file?
  
  Thanks a lot for help.
  
  John.

  ORACLE_HOME/dbs/orapw * IX and ORACLE_HOME/database / PWD.ora under windows

  Kind regards
  Uwe Hesse

  http://uhesse.WordPress.com

• OCP: Question about the critical files on control and collision

  Hello

  I am currently a student at OCP certification exam 1z0-053.

  To do this, I bought the all-in-one fixed Oracle Press (http://www.mcgrawhill.ca/professional/products/9780071629188/)

  During his studies, I would like to test, to prove things and simulate the operation to get more familiar as possible with important concepts.

  The study guide covers the fact that when a critical file is damaged or lost, the proceedings will end. The critical files listed are: all copies of the controlfile, a data file that belongs to the SYSTEM table, a data file which is part of the current tablespace undo.

  As said here's the quote:

  Some of the files are important. Damage to a critical file means that the database instance will end if it is open and cannot be reopened until the damage is repaired.

  [...]

  Practically the moment where that the damage occurs, the instance will end. As always, first reaction of the DBA to an instance crashed should be to attempt a start. It will fail in NOMOUNT mode, with an error message appropriate. The alert log will show what controlfile copy is missing and also - in the section list of parameters to initialize default - controlfile how many copies there are actually is and where they are.

  A self-test at the end of the chapter, it is:

  1. loss of these files will cause a database open failed? (Choose all good answers.)

  A. a controlfile multiplex

  B. A multiplexed log file online

  C. a multiplexed log file archive

  D. an undo tablespace datafile asset

  E. a tablespace temporary assets tempfile

  F. Since the SYSAUX tablespace data file

  G. a file of data space of SYSTEM tables

  H. a data file containing the user's critical data

  [...]

  Answer:

  1. A, D and G. damage to any copy controlfile put an end to the proceedings, as damage to critical tablespaces: SYSTEM and break current tablespace.

  So, under the 11.2.0.3 when I delete or corrupt a control file copy, the instance is not crashing and the database continue to work. Alerts log is only regularly notifynig controlfile missing:

  Fri Aug 30 10:16:02 2013

  Errors in the /u01/app/oracle/diag/rdbms/ocp1/ocp1/trace/ocp1_m000_26767.trc file:

  ORA-00210: could not open the specified control file

  ORA-00202: control file: ' / u01/app/oracle/oradata/ocp1/control03.ctl'

  ORA-27041: could not open the file

  Linux-x86_64 error: 2: no such file or directory

  Additional information: 3

  I'm not really knowledge.

  I have to stick to what is said in the book or the experienced facts?

  Thank you

  Bruno

  The information contained in the Guide of the exam are not correct as written.  The Oracle instance would end on the loss of a single control file.  Oracle documentation on the management of the control files is here:

  Management of control files

  It says: "If a control file is damaged due to a disk failure, the associated instance should be stopped. Once the drive is repaired, damaged control file can be restored using the intact copy of the control of the other disk file and the instance can be restarted. »

  "Stop" means that the instance has become unstable.  Unstable case act differently depending on the situation this way, the book is not (cannot) document the specific behavior that may occur.  While the loss of a control file means that the DBA should be abandoned to the instance, it is a very different thing from the instance to the destination of its own.

  The ultimate source is always the Oracle documentation. I checked the page of errata for this book to McGraw-Hill.  I only see an extra.  Submit this to them and get your name on the page as a contributor.

• Question about the balloon pilot

  Hello

  I have a question about the balloon pilot in ESX/ESXi 4.x. When the pilot is "inflated" the reason is to reveal to the ESX host memory of comments in fact is not used and that memory could be recovered by the host. However, the driver must be loaded all the time for this memory to be used by the host, as in giving him another VM?

  Or is it just inflate and deflate so and there is no need to stay charged?

  Once that memory has been retrieved the pilot deflates on its own.

• A few Questions about the creative cloud

  I read that the Creator Cloud connection will be released in the coming weeks, which is great. I have a few questions about the download file and the creative connection program of cloud.

  I have a file which I will download. The contents of this file will be updated periodically locally. I want to do the files in this folder to stay updated between my desktop and laptop. The Creative Cloud connection program will be able to do?

  If a file is changed, which is already in the cloud program will recognize the change and stay the cloud?

  I guess just a little more information on exactly what will be the program Creative Connection cloud would be nice.

  On the topic of storage I will be able to upgrade the standard 20 GB of storage that is available when / if needed? And how much will that be?

  Another question:

  When Lightroom 4 will be available via CC and why is it not available when it was released?

  Creative Cloud connection will keep files between your desktop and the Web site synchronized. You will be able to add, edit and delete files from each end and that the changes are reflected in both.

  To see the connection creative cloud in action, you can watch this video of evangelist Paul Trani Adobe http://tv.adobe.com/watch/adobe-creative-suite-6-creative-cloud-launch-week/adobe-creative - cloud - tour-/.

  There will be a way to get more than 20 GB of storage. Adobe Creative Cloud http://www.adobe.com/products/creativecloud/faq.html FAQ has a question and an answer about it down:

  Buy extra creative Cloud storage?

  Additional storage will be available for purchase later in 2012. If you have reached your storage limit, contact Adobe Customer Service.

  Lightroom 4 will be available in a few weeks. Jeff Veen also tweeted this https://twitter.com/#! / veen/status/200810541550288896. Other Articles of Jeff on what comes to the Adobe Creative cloud here in his blog of Adobe http://blogs.adobe.com/creativecloud/coming-soon-to-creative-cloud/.

• I have a question about the time machine. I recently updated my Quicken 2015 and there was something wrong with the update. Can I go back in just the Quicken file and restore it until I downloaded the update do I have to restore the entire

  I have a question about the time machine. I recently updated my Quicken 2015 and there was something wrong with the update. Can I come back in all the Quicken file and restore from time Machine before I downloaded the update to do, I need to restore the entire computer?

  Yes, you can just restore this file or application. Use Time Machine to back up or restore your Mac - Apple Support

• Question about the recovery partition

  Hello.

  I have a question about the recovery of HARD drive partition.

  If I do the operation to clear the hard disk option in the wizard it will remove * all * or it will keep my partition recovery in this way I can come back later. I want to know because I would like to put on a different OS.

  I know he said he would, but caution in the PDF, I found it says that on a normal recovery too (that he would remove each partition) and I'm a little confused about how the recovery actually worked.

  Thank you.

  Hey Buddy,

  To be honest I n don't know what you mean exactly with this option to erase.

  In General, Toshiba Recovery disk will wipe your entire HDD to restore factory settings correctly. This means that if you start from that disk and follow the instructions on the screen, everything will be removed.

  In addition, the recovery disk doesn t create a recovery partition. It is not available. Disk copy just the files on the second partition in folder HDDrecovery to start an installation of HARD drive recovery.

• Re: Several questions about the recovery of the Satellite L750 features

  I have several questions about the recovery of Satellite L750 features available to it. Any help and answers would be useful.

  (1) when I started the laptop first, he asked me to create a recovery CD incase I need to reinstall the operating system. But he also said that he built in the recovery partition, so therefore, I have to make a recovery cd or not?

  (2) will be the recovery CD is exactly the same as the recovery on the system partition?

  (3) is the partion of CD or recovery includes all the integrated software pre-installed with the laptop?

  (4) also in the device manage management it shows watch partion recovery but it is empty, is it true?

  (5) in the second partition (drive D) system, he has a record with what looks like the recovery of files and folders. Is it safe to move/remove it?

  Hello

  I'll try to provide answers:
  1 - to ensure that everything works perfectly you don t need these discs, but if something goes wrong with the HARD drive you will not be able to do anything. When you have the recovery DVDs, you will still be able to install the recovery image and once again the factory settings. So my advice to you is: create these discs as soon as possible. Use only on DVD-R media and buy products of high quality (TDK or Verbatim).
  2 - Yes.
  3 - Yes.
  4 - No. Don t be confused with this.
  5. in a first time create restore DVD, and later you can do what you want. I put t know which files mean you but don t touch anything before that of the recovery disks to be created.

  In the past, many people have been experimenting with the structure of HARD drive and partitions and later was surprised when installing disk recovery HARD has been damaged. Don t make the same mistake.

  If you have any other questions you are welcome.

• Recently bought a laptop computer; A few questions about the offer Upgrade to Windows 8

  I have a few questions about the Upgrade of Windows 8 offer for new computers.  I recently bought a Toshiba Satellite S855-S5268 of amazon.com, which came with Windows 7 Home Premium.  Toshiba already has a beta version of drivers and utilities for Windows 8 for the S855 on their Web site.

  (1) I bought my laptop in July of this year, and I've not yet registered for 8 Windows Upgrade offer with Microsoft.  Am I still eligible to receive the upgrade, if I sign up soon?
  (2) if I buy the upgrade through this offer, I'll be able to download an ISO file so I can burn the installation media, or do I need to upgrade to Windows 7?
  (3) if I will be able to burn the installation media, I'll be able to erase my hard drive and do a clean install of Windows 8 (which I'd rather do, I have a lot of backups of my data).  I am aware that I would probably need to provide my product key Windows 7 Home Premium 64-bit OEM during the new installation, because it is an upgrade and not a full version; This isn't a big deal, because my Windows 7 Home Premium 64-bit OEM product key is stuck at the bottom of my laptop.
  (4) my current copy of Windows 7 is activated by seeing my BIOS (I have a traditional BIOS, not a UEFI).  If I had to switch to Windows 8 and decide then I'd rather back in Windows 7, for example, a few months later, I'll be able to do that (I burned recovery of Windows 7 with the Toshiba utility disks, which I did), and Windows 7 will continue to activate by seeing my BIOS, even after the installation (and later remove) Windows 8?
  Thank you very much!

  I have a few questions about the Upgrade of Windows 8 offer for new computers.  I recently bought a Toshiba Satellite S855-S5268 of amazon.com, which came with Windows 7 Home Premium.  Toshiba already has a beta version of drivers and utilities for Windows 8 for the S855 on their Web site.

  (1) I bought my laptop in July of this year, and I've not yet registered for 8 Windows Upgrade offer with Microsoft.  Am I still eligible to receive the upgrade, if I sign up soon?

   

  Yes, the registration period is between June 2, 2012 to January 31, 2013.

  (2) if I buy the upgrade through this offer, I'll be able to download an ISO file so I can burn the installation media, or do I need to upgrade to Windows 7?

   

  Yes, the Upgrade Wizard of Windows 8 will allow you to create a bootable DVD or you can grab the ESD file and save it.

  (3) if I will be able to burn the installation media, I'll be able to erase my hard drive and do a clean install of Windows 8 (which I'd rather do, I have a lot of backups of my data).  I am aware that I would probably need to provide my product key Windows 7 Home Premium 64-bit OEM during the new installation, because it is an upgrade and not a full version; This isn't a big deal, because my Windows 7 Home Premium 64-bit OEM product key is stuck at the bottom of my laptop.

   

  Yes and there are better ways to reinstall Windows 8 without using the installation disc, you can use the reset and refresh.

   

   

  These steps will take you through refreshing your PC:

  · Press the Windows key + C on your keyboard to show the charms (if you use a touch screen: touch the right edge of your screen and drag your finger to the left)

  · Click settings

  · Click change PC settings

  · Click general in the left column

  · Under refresh your PC without affecting your files, click Start

  Then follow the instructions that will be provided on-screen to cool your PC.

  (4) my current copy of Windows 7 is activated by seeing my BIOS (I have a traditional BIOS, not a UEFI).  If I had to switch to Windows 8 and decide then I'd rather back in Windows 7, for example, a few months later, I'll be able to do that (I burned recovery of Windows 7 with the Toshiba utility disks, which I did), and Windows 7 will continue to activate by seeing my BIOS, even after the installation (and later remove) Windows 8?
   
  As long as you have a recovery disk which you should create or use the construction in the recovery partition, Yes, it will self activate.
  Thank you very much!

• I need a way to search search all the .vmx files

  I have a problem with vMotions in vCenter 6.0 I migrant to ESXi 5.5 with standard switches to a vCenter 6.0 with distributive switches.  For your information, here is the process.

  (1) unplug the host to vCEnter 5.5

  (2) add a host to vCenter 6.0

  (3) migration of ESXI 5.5 to 6.0 ESXi host with the installation of a standard switch.

  4) migrate to 6.0 with standard switch ESXi ESXi 6.0 with D-switch.

  Full migration.  The reason for the double jump is that esxi 55 can't change host and network to a switch-d so I have to get to ESXi 6.0 first.

  It all works very well, but for some reason, the .vmx file doesn't change not the port group. She is always present the standard switch. How ever VMS are on the rise and connected, the web client shows the port of switch-D group.  But when I do a vMotion it changes again in the d switch and the VM crashes.

  I have a case open with VMware to solve this, but I need to get the other VMS migrate without failure.

  The explanation may have been a bit long-winded, but here's what I need.

  I'm OK with PowerCLI but it is a bit outside my experience.  Can we create a script for watching all the ethernet ports in the .vmx for all virtual machines files see what port on their group name?

  Thanks for any help

  Tree!

  Try like this

  Get - VM | Select Name,

  @{N = "PG"; E = {(Get-NetworkAdapter-VM $_ |)} {(Sélectionnez-ExpandProperty NetworkName) - join ' |'}}

• Questions about the process of cloning in Oracle Apps

  Hello..
  
  I'm trying to clone Oracle 11i (single node) Linux applications, but with some doubts in the process... could someone please help me...
  
  I ran preclone (adpreclone.pl) scripts on both layers of DB and APPL system source... then stop apps services and target the database copy in the system... but my question comes here... they say I should be copy only files of the SUMMITS as APPL_TOP, COMN_TOP, etc. and ORACLE_HOME, IAS_ORACLE_HOME... but these TOPS and HOUSES exist within a directory as...
  

  example:
  APPL_TOP - / dev/p01/oracle/devappl
  COMN_TOP - / devc/p01/oracle/devcomn
  ORACLE_HOME - /dev/p02/oracle/devdb/9.2.0

  by note metalink (230672.1), they say it's to copy...
  [APPL_TOP]
  [OA_HTML]
  [OA_JAVA]
  [OA_JRE_TOP]
  [COMMON_TOP] / util
  [COMMON_TOP] / clone
  [COMMON_TOP] / _pages (if this directory exists)
  [806 ORACLE_HOME]
  [iAS ORACLE_HOME]

  My question is should I be creating directories like (/ dev/p01/oracle/devappl) (/ dev/p01/oracle/devcomn) and copy the TOPS and HOMES in appropriate subdirectories or just simply copy... then run the process... postclone your ideas and suggestions are welcome... Thank you...
  
  Published by: Hart on June 11, 2011 03:13
  
  Published by: Hart on June 11, 2011 03:19
  
  Published by: Hart on June 11, 2011 03:21

  your right... that's the real way, manually create the directories and copy them from the source to the target by the metalink (230672.1) note... but I'm worried that I might miss some files in the copy process... I mean are below here are the the only ones required in the process postclone... because if you see the real $ORACLE_HOME (/ dev/p02/oracle/pixdb/9.2.0) to the user oracle is missing... What about the database files? .. .is there all I could mention to facilitate the creation of directories...

  You can just copy the files in the directories devdata, lolo, devappl, devdb, devcomn.

  Also all by creating the directories in this way... If I'm going to use a new name for the instance, do I have to replace the "dev" to the new name as 'edev' or something and then start the postclone process...
  /dev/P02/Oracle/pixdb/9.2.0
  /dev/P01/Oracle/pixora/8.0.6
  / dev/p01/Oracle/pixora/IAS
  / dev/p01/Oracle/pixappl
  / dev/p01/Oracle/pixcomn

  You can use any name for the main mount (it is-to-say/u01 /... or/edev /..), just replace dev with edev for five above mentioned directories.

  Thank you
  Hussein

• Question about the strength of password

  (do not ask questions about the recovery of the password, so please do not report this thread)

  OK, I heard that the virus can change the password on a computer.

  But if you have a password very complicated (for example, one with a lot of numbers and other things), it will be more difficult/less likely for the virus to be able to change your password?

  Yes.  A strong password is, it is more difficult to crack.  For more information, see create strong passwords on the Microsoft online safety site. Boulder computer Maven
  Most Microsoft Valuable Professional

• Questions about the management of specific nodes in different hierarchies

  Hi all

  I have a question about the specific management of some particular set nodes, which are located in different hierarchies within a same version.

  I want to know if there is any editing made to certain properties of these specific nodes or if the nodes are deleted/moved/edited approval to be triggered for the data manager.

  or should not allow users to edit (adding/moving/deleting/changing property values) or those specific members.

  
  

  According to my understanding of the nodes of domain prevents the removal of nodes, but I don't want my Member prefix/suffix, domain is the only way to prevent the change.

  
  

  
  

  
  

  Thanks and greetings

  Madhu
  

  We have an obligation to not allow a node to remove or deleted without the approval of the admin, so I created a Boolean property AllowDelete is false, which is substitutable, default and is available only in a category of property Admin, for which most of the users do not have access.  Then, I created a validation of PropRemove with an error message that tells the user to contact a user admin to remove or delete the node.  The admin can change the AllowDelete to true, then can either remove himself or to allow the user to do.

• HTML (Web), I have a question about the models.

  Hello CC animate developers.

  New features are really good.

  HTML (Web), I have a question about the models.

  <! DOCTYPE html >

  < html >

  < head >

  < meta charset = "UTF-8" >

  < title > $TITLE < /title >

  < meta name = "ad.size" content ="width = $WT, height = $HT" > "

  $CREATEJS_SCRIPTS

  $SCRIPT_START

  var canvas, stage, exportRoot;

  function init() {}

  $CJS_INIT

  }

  $PLAYSOUND

  $SCRIPT_END

  < script type = "text/javascript" >

  "clickTAG" var = "";

  < /script >

  < / head >

  < onload = "init (); the body"style =" background-color: #D4D4D4; " margin: 0px; ">

  < a href = "javascript:window.open (window.clickTag)" >

  < div style = "position: absolute;" cursor: pointer; box-sizing: border-box; border: 1px solid #000000; overflow: hidden; height: $HTpx; Width: $WTpx; Background: rgb (255, 255, 255.0); "> < / div >

  < canvas id = "$CANVAS_ID" width = "$WT" height = "$HT" style = "background-color: $BG" > < / canvas >

  < /a >

  < / body >

  < / html >

  In the example above, the model;

  < Meta name = "ad.siz of" content = "width = $ WTI height = $ HT" > "

  and

  < Div style = "position: absolute;" cursor: pointer; box-sizing: border-box; border: 1px solid # 000000; overflow: hidden; height: $HTpx; Width: $WTpx; Background: rgb (255, 255, 255.0); "> < / div >"

  I use labels. But these tags in the template and import, it gives an error does not occur.

  I think it was a mistake. I want to help in this regard.

  $ HT or Properties $WT , I get an error when I use elsewhere.

  I think I should be able to use anywhere I want.

  The same problem here - I worked around by some DRM models with different values of ad.size, but it's a solution quite short-seight

  Also - you are not able to create the model with transparent background by removing style = "" background-color: $BG ' as it also throws errors - is the only solution that I managed to get updates style = "background-color: $BG; background: none; ", but it's a really bad way of coding things.

  It would be really great to have freedom in changing patterns.

• The specific question about the placement of an image into text.

  Hello, I had a question about the placement of an image into text.

  I did the contours to create text to place the image inside. My text is 5 words and two lines inside the box.

  When I do create contours he gives me 2 transparent route separate layers for the top and the bottom line.

  How will I be able to do that in a single layer of compound to place image that expands to the two lines?

  First of all, there are two ways of describing the type. The default value creates anchored objects. You want a separate object, so hold down the Option/Alt key when you create outlines. Drag the new contours to separate the text block.

  It is useful to open the layers panel and view the contents of the layer. You have created a group which consists of two transparent traces. In the layers panel, expand the layer so you can see the structure. Shift-select the two transparent traces. (Make sure that the group is not selected.)

  

  Then choose object > tracks > make a compound path. This makes the two transparent tracks into one. Then, you can place or paste into the single compound path.