Question Equium L350 - 10L new HARD drive and recovery

Similar Questions

• Laptop HP Pavilion TS 15: QUESTION IMPORTANT HERE-new HARD drive and recovery on HP Pavilion Notebook TS

  Is it true that once you replace a new hard drive for your laptop, the recovery media will never work because of a chip in the motherboard?  I got a wonderful help here, but I just read on another post, that once you replace the disk, your screwed because of a chip in the motherboard and only HP can fix it.  Did I just waste my time and my money? Please, please, someone help. Now I'm all confused, thank you very much.

  2nd recovery disc was defective. Receipt again. Everything is great. Nothing to do with the motherboard. Thanks to all supporters HP volunteers, your the BEST!

• New hard drive and recovery disks

  Hello!

  I will replace my origianl HD with a new in a NC6400 laptop.  I have the recovery disks created when I received it.  Is it just a matter of changing the drive and running recovery disks?  Will be - this re-install all the drivers for the laptop as well?  I know that all data and installed programs will not be there, it's the drivers I'm worried.

  Thank you

  Wine

  Hello

  Your recovery disks will reinstall your operating system, all the drivers and all the software that originally came with your laptop.  They will also recreate the Partition Recovery D: on the new drive.

  I hope this helps.

  Best wishes

  DP - K

• Having trouble installing new drivers after installing a new hard drive and Windows Vista.

  I just installed a new hard drive on my computer of dell inspiron 1525. I managed to do it and it worked. I had a disc from dell to reinstall windows vista edition Home premium 32-bit and had drivers and utilities dvd. However I couldn't connect to the internet. I understand I'm missing some drivers but I rebooted the computer, but it goes to the black screen asking you to start in safe mode, safe mode with network, normally and something else. But after trying all of them, it goes straight to this same screen. What can I do? Or I can clear the new hard drive and start over? Any ideas?

  original title: new installation from hard drive problem

  Hello

  I suggest that you run the Startup Repair tool and check if it solves the problem:

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  I suggest Download driver network card on another computer, and then transfer the file using any flash drive and even install in the computer you have challenged.

• Bought a new hard drive and installed Windows 7. I then installed the old hard drive XP in a different machine and now I am told to reactivate Windows XP.

  Bought a new hard drive and installed win 7 to him to replace my old hd in xp. I then installed the old hd in xp to replace a system running under win2k, but I was prompted to save it. can I use the old license key that accompanies the xp or should I get a new license?

  original title: Win2K to XP

  Registration and "Activation" are two different things, registration is not required, the activation is and if the road that has XP on it done from another computer and a "Retail" version, then you will need to activate by phone using your existing product key.

  How to activate Windows XP
  http://support.Microsoft.com/kb/307890/en-us

  See the section titled: "how to activate Windows XP by phone.
  Also, make sure that you do not confuse the product key numbers and letters
  (number 8 for the letter B, etc.)

  Blank page to activate Windows in the wizard of Windows Product Activation
  http://support.Microsoft.com/kb/314935

  How to contact a Microsoft Product Activation Center:
  http://support.Microsoft.com/default.aspx/KB/950929/en=us

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Once Windows activated / Genuine Advantage Notifications:
  http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=afd45b36-3d77-4259-801c-d31a9a90cdcf
  (This tool will confirm that the copy of Windows installed on your PC is genuine and authorized)

  J W Stuart: Http://www.pagestart.com

• Hello, my parents computer came RAM volume0 has failed and not be able to start. We went and brought a new hard drive, and its always say the same thing. Any ideas?

  Hello, my parents computer came RAM volume0 has failed and not be able to start. We went and brought a new hard drive, and its always say the same thing. Any ideas?

  A message on the RAID 0 volume failed is a recognizable error message, but the news is not good.

  RAID, by its nature, requires 2 or more drives.  RAID = redundant Bay of independent (or inexpensive) disks

  RAID 0 is the worst of the different RAID choices.  It increases the performance of hard disk by spreading or striping, data on two disks so that he can read and write more quickly. Unfortunately, such a picture offers no protection of data - in fact, it increases the chances of loss of data since the failure of a disk in the array results in the loss of all data on both drives. RAID 0 configurations are standard on high-end and PCs graphics games and provide a performance gain measurable, albeit modest for games, graphics applications and other programs intense from the hard drive.

  In view of the foregoing, the best course of action for you and your parents is to take the computer to a local computer professional - not a type of place BigBoxStoreUSA or GeekSquad.

• My hard drive is damaged. I got a new hard drive and now I want to reinstall Windows. Can I use my existing product key?

  original title: my hard sucks

  my hard is damaged in some portion.can, I changed the new hard drive and reinstall Windows vista with the existing product key?

  Hello

  Yes, you can reinstall vista with your product key on the new hard drive

  Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  Here's how to do a clean install of Vista

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

• I INSTALLED A NEW HARD DRIVE AND FORGOT TO BACKUP MY DATA

  I INSTALLED A NEW HARD DRIVE AND FORGOT TO BACK TO THE TOP OF MY DATA IF I DON'T REMEMBER MY CODE TO SECURITY/PASSWORD OF THE WIRELESS ROUTER

  You need to reset your wireless router if you do not have access to it to retrieve your security code.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/189126

  "Microsoft's strategy concerning lost or forgotten passwords"

  Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.

  See you soon.

  Mick Murphy - Microsoft partner

• HDD problem IBM Thinkpad T42. I can't install NEW Hard Drive and NEW OEM Windows XP?

  Hi all

  When I turn on the notebook Windows XP starts up and everything is loaded. But after 5 or 10 minutes, the response is very slow. If I click on any window and try to open any folder, or open internet explore it takes about 1 or 2 minutes to respond. I tried several ways to scan disk and Defrag, but still that are of no use. I also tried 'Difficulty automatically File System Errors' and ' will search for and attempt recovery of bad sectors ", but this problem is still there. Even when I stop it takes too long to stop about 15 to 20 minutes.

  When I turn on again NEXT DAY Windows XP starts and everything loads quickly. After 5 or 10 minutes, the response is very slow. This problem occurs for a few days.

  I then used "IBM Rescue and Restore" to load fresh operating system. Still the problem does not get fixed.

  Can you get it someone please let me know if this is problem of hard disk or something else. I'm guessing it's related to the hard drive.

  If it is the drive hard problem how to save (clone) of this old hard drive AGAIN DISK (after buying) HARD.

  If I buy the NEW HARD DRIVE and CD/DVD of NEW OPERATING SYSTEM OEM VERSION it will work? Do existing mother board ALLOW to load a NEW VERSION of OS OEM?

  Thank you

  Contact the manufacturer of your computer, IBM and ask them to send a recovery disk/s XP set.

  Normally, they do this for a cost of $ small.

  Buy a new hard drive > Reinstall.

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• Hard drive crashed with CS5 on it. Has not been disabled before the collision. Desktopcomputer again loaded on the new hard drive and bu news updates do not work on the new computer.

  Hi, I hope I'm in the right forum! I have a laptop Aspire with Photoshop CS5 extended. The computer's hard drive crashed and so I had to get another hard drive! Obviously as the hard drive crashed, I was unable to disable CS5 extended before the crash. I have it charging on the new hard drive and in the meantime bought a desktop computer in which I loaded CS5. Updates have been working fine on the laptop. I tried to update the program on the new computer, but continue to receive error messages. I have read in any problems and think maybe computer laptop harddrive that crashed had CS5 yet on it, as I was unable to turn it off because I didn't know he was going to crash. I am only able to load CS5 on 2 computers and if it is still on the destroyed hard drive so I'm not able to turn it off and so I presume that is why I can not download the updates on my new computer. I hope someone can help me. I want to keep CS5 on both computers. Thanks in advance bunch Kara

  If you see excessive activation anomaly of counting, contact adobe for hourly pst support by clicking here and, when available, click on "still need help," https://helpx.adobe.com/contact.html and request an account reset activation.

  If you receive a different error, what exactly is this error?

• How can I reinstall Photoshop elements 7? I have the numbers series but bought 6 years ago. I have a new hard drive and the original link to reinstall but it doesn't work.

  I have a new hard drive and you want to reinstall Adobe Photoshop Elements 7. I know it's old but it works well for me. It of there in my orders with the serial number, but what do I do next?

  Buy a new, more up-to-date Photoshop elements?

  All the stuff sounds really complicated cloud creatives and seems very expensive.

  maureenart wrote:

  I have a new hard drive and you want to reinstall Adobe Photoshop Elements 7. I know it's old but it works well for me. It of there in my orders with the serial number, but what do I do next?

  Buy a new, more up-to-date Photoshop elements?

  All the stuff sounds really complicated cloud creatives and seems very expensive.

  Try to download from here:

  Download Photoshop Elements products | 9, 8, 7

• I just installed a new hard drive. and reinstalled a clean copy of Windows 8.1.  Windows 10 waiting to be installed. I have licensed copies of Photoshop CS6, Lightroom 5 and 12 elements with Acrobat Standard. The Adobe programs are now asking

  I just installed a new hard drive. and reinstalled a clean copy of Windows 8.1.  Windows 10 waiting to be installed. I have licensed copies of Photoshop CS6, Lightroom 5 and 12 elements with Acrobat Standard. The Adobe programs are now asking to be uninstalled and reinstalled I can understand. However, should I do before moving on to Windows 10?

  Yes

• I tried to reload a CS3 program previously downloaded on my new hard drive and this is the message when I click the English link for Mac products: HTTP ERROR: 404 /support/downloads/dlm/main.jsp RequestURI=/support/downloads/dlm/main.jsp

  I tried to reload a CS3 program previously downloaded on my new hard drive and this is the message when I click the English link for Mac products: HTTP ERROR: 404 /support/downloads/dlm/main.jsp RequestURI=/support/downloads/dlm/main.jsp

  Make sure you have cookies enabled for your browser.  Try using a different browser if the problem persists.

• HP G71: Install the new hard drive and the raw copy

  Hello

  My HP G71 is 64-bit, 4 GB RAM and hard drive WD320BEVT. The laptop has more than 5 years of service and I want to replace with a new hard drive while performing a raw copy of the current. I have a dual boot Win 7/Ubuntu installation I want to keep on the new hard drive.

  As I have not found a new HD of the same type and capacity, I would like to replace the current one with an another Western Digital 2.5 ", the IDE interface, but with a capacity of 0.5 to 1 TB (I choose one or the other).

  My questions:

  -can I install one of these hard drives on this laptop? They are compatible with the current BIOS/chipset?

  -If I make a raw copy of the 320 GB drive to the 0.5 or 1 TB, how would the current operating system partitions will be reflected in a higher capacity drive?

  -J' bought an IDE/USB interface adapter as well as to make possible the raw copy, could you recommend, if these questions have the THUMB, a good free to use software that I could use?

  Thanks for your help!

  Yes I use Kubuntu and tried several times to just the entire disk image and it does not reproduce partitions Linux and Grub, but when you try to start Linux it will hang and say can not find the prior specific hard drive. So now I just make a backup of Windows and reinstall Kubuntu from scratch. Much easier. I think there are also Linux backup programs you can use, but never really saw the need.

• New hard drive and try to reinstall the OS. Have discs of Hp recovery but fell in DVD player

  Hi all,

  I just put a new hard drive in my HP Dv7. I also ordered recovery disks. When I tried to put the disc in I discovered that my DVD drive is not working

  My question is can I transfer the recovery on a USB disk and then from there?

  I would be grateful for any ideas!

  Thank you in advance,

  Marc

  Don't know where you live, but any reputable computer store such as best buy, Staples, or even online at Amazon.com