question from newb on 6100 fabrics

Similar Questions

• Question from newb on Application.cfc vs .cfm

  Sorry for the newb question total which is probably covered a bazillion times, but I have some difficulty to get things to work.  I know this, because I got the CF9 advanced training, but when you have 60,000 pages worth of content back to the office waiting to be converted into a new design, there is not much time to practice what you have learned in class .

  A lot of my Office Web site is rest when we were running CF 6.1, so what use the Application.cfm files.  Now that we have run CF8 (and could soon move to something even more recently), I would get everything upgraded, including obtaining my Application.cfm stuff in an Application.cfc file.  One of the reasons why I want to do this is because I have a few apps I want to use the OnRequestStart() methods for.

  My problem comes from the fact that our Application.cfm file done many things such as global variables, queries, and other things that I can't get to work within an Application.cfc file.  Particularly strange is the fact that I've recently implemented a CF10 site to the Web sites of the company of my wife and got done Application.cfc work without much trouble, leading me to suspect a problem installing with my office.

  I tried following the guide on the Hostek forum, but nothing helped.  I can't include the content of our old Application.cfm file in the new cfc.

  Any tips?

  BreakawayPaul wrote:

  If you want these variables (included in the Application.cfc) is available to each requested page, then you must store them in the scope of the request instead.

• Question from newbie GPIB on multiple devices

  Hello, I'll work on the reproduction of a test bench that communicates through GPIB. I've never worked with GPIB and I'm looking for a list of hardware to buy to reproduce this system and have a question. I'm having 2 GPIB devices, one on the address 9 address the other 22. One device is a voltmeter of HP and the other is a HP (3488 (A) switch unit. The old test bench has 2 GPIB cards for that but my question is should I really 2 GPIB cards to communicate with these 2 devices? From what I've read up to 15 devices can be connected on the same port, GPIB. Is how software should be written is different because of the Garland of devices?

  Hello

  GPIB addresses up to 15 devices and you don't need two gpib cards.

  Addresses of software always using an address, so the only thing you need to take care of is to assign different addresses to instruments and to ensure that all calls are sequential, not parallel because it's just a bus.

• Questions from Newbie to Smartphones blackBerry re: BIS (but not a newbie to BB)

  I had BB phones since the 8320 came out.  Now have 9700.  I make use of BB intl e-mail when overseas.  (I think BB is in 90 countries - I have used it in at least 15).

  1. I'm not really well informed about all this.  All I know is that BB treats my email is transferred from gmail, Yahoo, etc.  I send my email in gmail (single company)...

  BB will continue this service for phones that work on OS 5, 6 and 7?  I think it has been discontinued on OS 10?

  2 suitable service BES a businessman solo who needs to manage the e-mail?  It would seem that maybe that's only for mega-companies.   Are there companies out there that would bundle small users together in order to access the BES?  (Is it possible.?)

  And finally, if small users will, in fact, to be cut utilities to BB - why should stay us (just 2 lines)?

  Suddenly cut Google Google Voice of all BB users last month.  Google Maps still work on everything but OS10 - but Google could cut that as well (although I doubt it because I think it's a money maker for them.)

  Except for the fact BB may be the last regulation. should w. a physical keyboard - only BB offer do not have Android or other systems of the OS?   Due to a slight hand tremor recently acquired - I need a physical keyboard.  I have trouble using a virtual keyboard.

  Thank you.

  miketha wrote:

  Just a follow-up question, if you don't mind.    TMobile (US), and I think that ATT offers unlimited e-mail for international travel to 67 cents per day.  This feature/option seems to disappear, we continue to use a phone with BIS.

  I have no idea... the companies control plans and the services that they have, and I found it quite impossible to make up the differences among the hundreds of carriers supporting the BB in the world. You ask them about it.

  miketha wrote:

  And thank you to confirm WHAT BES is suitable for large organizations.

  Is not at all what I said, and I do believe that it is true. Internal full BES, Yes, is oriented to companies that can achieve economies of scale. But there are services of BES-level (e.g., hosted) available pretty much anyone.

  Good luck!

• Question from Newbie blackBerry Smartphone memory card

  I have recently entered the world of BB and am happy with my curve 8330 from Sprint. I am down encryption and have scoured all the online info, I can find as well as the manual. I'm barely scratching the surface of all uses and features, and while I am old guy when it comes to computers (50) and am not an expert, I'm not afraid of technology either and am eager to learn. I have a few simple questions (I hope) that I could use some help/advice for.

  (1) the BB came with a 1 GB card and I also bought a 2 GB card. If I want to change the 2 GB card, I have to do and what items/app will be affected by the swap? I'm not sure if the BB has an internal memory and the memory card, and what exactly is used to by the BB memory card. And what are the benefits to upgrade me to the 2 GB card;

  (2) If an email I rec'v has an attachment which is a video, I can't play (although no problems with photo attachments) is at - it an app I want to download on the BB for videos, and if so how can I do this and where to get the application? I've never downloaded an app on the BB before and am not sure exactly how do;

  (3) is at - he an advtage to connect to a Wifi hotspot from your mobile operator in some cases and my 8330 allows a wifi connection and how do I configure it if so.

  Thanks for anyadvice and help that you can lend... I'm new to this but am fascinated by the possibilities.

  Joel

  If media files are on your device memory, it just load Media Manager into the Desktop Manager and move on.

• Question from newbie Javascript RE: Actionbar

  I'm a newbie to all this, so I apologize.

  I use the Sub checklist.js for the creation of checklists.  Can someone show me what command I would put in the section onclick of the script to run a clear list bar action?

  Based on the literature, it does not appear that it is a standard feature (that is to restore all the unchecked boxes.)
  http://dealancer.github.IO/checklist.js/

  The Github page would be a good place to request for it to be added.

  I did some Web Inspectoring on the example provided here:
  http://dealancer.github.IO/checklist.js/

  And although it seems that you can display the individual items via Checklist.checklist.models, it does not appear that there is no built-in feature to change the values such that she is also reflected in the user interfaceprogrammatically, or reset the list.

  Change in blue.

• Question from newbie on get - vm.

  I'm just getting started with the tool kit and am trying to set up a script for our VDI environment.  I have a pretty basic question, which so far is the stumping me.  I need to empty a list of all the reviews on each of my hosted ESX connected to my VC server.

  Sounds easy and I don't know that it's when I try to specify the VIServer target with the command Get - VM, it maintains were reluctant to tell me the name of the server is incorrect.  I ran Get-VMHost just to ensure that I was typing the name of the ESX Server correctly but nothing helped.  If I do a Get - ESX instead of a Get - Get - VM VC works for the specific server I did Get - ESX for but I was hoping that I could just do a Get - VM with my credentials of VC and dump the results into a variable for each ESX host.

  Any help would be greatly appreciated!

  I made a mistake with the previous example. Here is a better:

  Connect-VIServer "YourVC.domain.local"
  Get-VMHost "ESXServer.domain.local" | Get-VM
  

  To loop through all the ESX servers:

  Connect-VIServer "YourVC.domain.local"
  ForEach ($VMHost in Get-VMHost)
  {
  Write-Host "========="
  Write-Host $VMHost.Name
  Write-Host "========="
   $VMHost | Get-VM
  }
  

  Post edited by: hugopeeters: man, I must be tired

• Question from newbie on license information

  I don't have a team, but I don't have two offices with two different computers. To be able to used creative cloud in these two places on two different computers, that I have to get a monthly subscription 79 or I can do with a monthly subscription of 49? Thanks for your help in advance!

  Tim

  You don't need the team level only the individual level membership. With membership at the individual level, you will be able to activate on two computers.

  The differences with members of the team are:

  1. Have an administrator who manages the payment and then gives "seats" to the members of the team.
  2. File storage of cloud increased from 20 GB to 100 GB.
  3. Two expert services call per seat.

• Question from newbie to PL/SQL.

  Hi all
  
  Although having programmed and made with different db dba work, I've never done much PL/SQL
  
  I use Oracle XE 10 on Linux with SQLDeveloper and SQL * more like my dev tools.
  
  I have a package that compiles, but I can't seem to run. It is very short and simple. I'm probably just
  missing something easy. The code compiles, but when I run it, I get no output from my
  dbms_output.putline. What I would like, in the first instance is to see my production coming in SQLDeveloper.
  
  Also, when I log into SQL * as the user I'm connected to SQLDeveloper as, and I'm trying to
  exec call_business_hours (Sysdate - 1, Sysdate); I get an error 'identifier 'CALL_BUSINESS_HOURS' must be declared.
  This intrigues me, I created the package and compiled successfully using this user.
  
  Any help appreciated - I looked to texts and google and despite having already managed to
  Download '3rd party' substance and running upward, it beat me.
  
  

  CREATE OR REPLACE PACKAGE DATE_PKG AS 
  FUNCTION Business_Hours
  (      
    in_start_dt  IN          DATE     DEFAULT SYSDATE,
    in_end_dt        IN          DATE     DEFAULT     SYSDATE
  ) RETURN NUMBER;
  
  PROCEDURE Call_Business_Hours(start_date  Date DEFAULT Sysdate - 1, end_Date Date DEFAULT Sysdate);
  END DATE_PKG;

  And the body is as follows
  

  CREATE OR REPLACE
  PACKAGE BODY DATE_PKG AS
  
  FUNCTION Business_Hours
  (      
    in_start_dt  IN          DATE     DEFAULT SYSDATE,
    in_end_dt        IN          DATE     DEFAULT     SYSDATE
  )
  RETURN NUMBER
  AS
  
       d                 NUMBER;                                -- Hours of either start_dt or end_dt after midnight
       end_dt           DATE    := GREATEST (in_start_dt, in_end_dt);  -- In case dates were in wrong order
       return_val NUMBER;                                      -- Total number of working hours
       start_dt      DATE    := LEAST    (in_start_dt, in_end_dt);  -- In case dates were in wrong order
  
  BEGIN
  
   WITH     all_days     AS
   (
     SELECT     start_dt + LEVEL - 1     AS a_dt
     FROM     dual
     CONNECT BY LEVEL <= 1 + TRUNC (end_dt) - TRUNC (start_dt)
    )
       SELECT     SUM (12) INTO     return_val
       FROM     all_days
       WHERE     TO_CHAR ( a_dt, 'Dy', 'NLS_DATE_LANGUAGE = ''ENGLISH''')       
      NOT IN ('Sat', 'Sun');
   
   
       -- Adjust hours from start_dt, if necessary
    
    IF  TO_CHAR ( start_dt, 'Dy', 'NLS_DATE_LANGUAGE = ''ENGLISH''') NOT IN ('Sat', 'Sun')
        THEN
             d := 24 * (start_dt - TRUNC (start_dt));
             IF  d >= 18
               THEN       -- Don't count start_dt itself
                     return_val := return_val - 12;
             ELSIF d > 6
             THEN    -- Don't count part of start_dt
                  return_val := return_val - (d - 6);
        END IF;
      END IF;
   
   
       -- Adjust hours from end_dt, if necessary
       
     IF  TO_CHAR ( end_dt
                    , 'Dy'
                , 'NLS_DATE_LANGUAGE = ''ENGLISH'''
                ) NOT IN ('Sat', 'Sun')
       THEN
            d := 24 * (end_dt - TRUNC (end_dt));
            IF  d <= 6
            THEN       -- Don't count end_dt itself
                 return_val := return_val - 12;
            ELSIF  d < 18
            THEN    -- Don't count part of end_dt
                 return_val := return_val - (18 - d);
            END IF;
       END IF;
   
       IF  in_start_dt > in_end_dt
       THEN
            return_val := -return_val;
       END IF;
   
       RETURN     return_val;
  END Business_Hours;
  
  PROCEDURE Call_Business_Hours(start_date Date DEFAULT Sysdate - 1, end_Date Date DEFAULT Sysdate) 
  AS
   businessHours integer;
  BEGIN
    dbms_output.put_line('Coming into Call_Business_Hours');
    businessHours := Business_Hours(start_Date, end_Date);
    dbms_output.put_line('Date in numbers ' + businessHours);
  END Call_Business_Hours;
  
  END DATE_PKG;

  Paul...

  Paulie says:

  No - businessHours is indeed a number - it should be blah... | TO_CHAR (businessHours);

  Or am I wrong?

  Yes and no. Concatenation operator operands are strings, so any concatenation non-chaine operator will be implititly converted to a string. If the only difference between

  "Date in numbers | businessHours

  and

  "Date in numbers | TO_CHAR (businessHours)

  is implied against the explicit conversion.

  SY.

• question from newbie on livecycle data services are

  Hi all.

  I downloaded the virtual appliance VMware of LiveCycle ES2, place it upward on an esxi server, workspace content, all space are running, but here's my question, how to install here livecycle data services? How do I put in place to start work with the rest?

  I have read the documentation on how to install, but I'm a bit confused.

  can someone give me guidance on this subject?

  help would be appreciated

  Thanks in advance

  (1) in the Workbench ES2 create a process to create a new user. If you need create a group there is also a service to create the group. Create a short lived process using the Avoka service > Create User operation. The Create User operation has the following entries.

  

  (2) create a process variable called 'newUserXml' to type 'xml' and declare the variable as input. Ideally, create a schema of the XML.

  (3) the operation create a string containing the user ID, a user has a single output. Create a process variable called "userID" of type "string" and declare the variable as an output.

  (3) economy, Express check-in and deploy process.

  (4) in order to test the process, call the process of the Workbench. For the input variable, plug data into an xml like this structure...

  (5) if the test is successful, you are ready to create the Flex application. If not, figure out why.

  (6) building a Flex application. Once you have deployed the process, the remote end point is automatically created and can be accessed by Flex. This is a draft.

  http://www.Adobe.com/2006/mxml"creationComplete =" initChannelSet () ">"

  Import mx.messaging.channels.AMFChannel;

  Import mx.messaging.ChannelSet;

  Import mx.rpc.events.ResultEvent;

  Import mx.rpc.events.FaultEvent;

  private function initChannelSet (): void {}

  var cs: ChannelSet = new ChannelSet();

  cs.addChannel (new AMFChannel ("my - amf","http://localhost: 8080/access remote/messagebroker/amf" "));

  ro.channelSet = cs;

  }

  private function submitRequest (): void {}

  var newUser:XML = new XML (getXmlData ());

  ro.setCredentials ("administrator", "password");

  RO. Invoke({newUserXml:newuser});)

  }

  private void remotingResultHandler(event:ResultEvent):void {}

  var userID:String = event.result.userID;

  ...

  }

  private void remotingFaultHandler(event:FaultEvent):void {}

  Alert.Show (Event.Fault.faultDetail.ToString ());

  }

  private function getXmlData (): String {}

  var xmlStr:String = "".

  + "" + login.text + ""

  + "" + password.text + ""

  + "" + commonName.text + ""

  ....

  + ">";

  return (xmlStr);

  }

  ]]>

  "result =" remotingResultHandler (Event) "fault =" remotingFaultHandler (event) "/ >

  IU goes here...

  Steve

• Question from newbie on masking/extraction

  Hello

  I'm relatively new to Photoshop and tries to extract an image of a face from its background. Unfortunately, the image that I use is extremely difficult. It is definitely not for beginners. I have attached to this email. I wonder if sometimes the best strategy is to simply pass on the photo and not even attempt it. In other words, pick your battles. How advanced users would attempt to extract or hide this photo? I started with the usual and then entered tools in the troubled world of masks, but I dropped. Any tips? See attached picture.

  I work in CS4.

  Thank you.

  You can duplicate any channel, or image > calculations to improve the difference between her hair and the background. You can adjust the levels of the mask as a result, as painting on masks with a brush in overlay to tease mode contrast in the mask. There are four quadrants in the background (right, left, up-right, at the top left), and each may have a separate mask.

  You can use a brush in color mode to help bring back the color of any fringe to color her hair. A quick assessment, I would say that this mask will be very difficult to do, especially if you hope to print the results. If you just need to seem him for good in a web picture 400 px, it's different.

  See here for a bunch of tut links: http://forums.adobe.com/thread/370974

  Good luck.

• Hey guys, this is a question from newb regarding my Skype username.

  Hello, everyone. I have been using Skype for more than a decade. All the accounts I had included a user name, which was connected with my e-mail address for password recovery. Now, I decided to register with Skype by Microsoft, so my login is now my e-mail address, not a "username" (name of Skype). When I give my Skype info to other people, I don't want to give my e-mail address for them to find me on Skype, I would give them a "username" as I have done all these years. I looked through the options on my PC and on my Android phone, and I can't find a way to create or view the user name (if it still exists, without taking into account my e-mail address). Is someone can you please help me understand this? I would be very happy.

  Thank you.

  -Buddha

  If you create your account using the Microsoft account option and say an email that looks like this: @outlook.com, then the generic username will be Live:.

  Your friends should be able to find using this generic name.

• Question from Newbie Total of blackBerry Smartphones

  I have just purchased my first Blackberry (a sim-free Curve 9300) and I'm trying to configure it to use on my Orange Bill.

  Facilities only with the fact that I have a problem are email and MSN... When I try to connect to MSN, I am told that the 'Service not enabled for this pocket' and email seems to suggest that I need to activate a company account (whatever it is)

  What should I do now to get these to work? My provider needs to change something on their end or what. Any help gratefully received.

  Thank you. All resolved and everything works fine now.

• Question from newbie to Lightroom purchase

  Hi guys,.

  Without trawling pages trying to get an answer, can I just buy Lightroom on its own, or do I have to buy Creative Cloud? I want only LR, so this is my first choice.

  I used the trial and enjoyed some of the features, but there is no 'upgrade to the full version"that I can find, other than buying CC.

  Thanks in advance...

  Matt

  You can buy the stand-alone version of Lightroom products

• Question from newbie Flash (swf open warning)

  I am just learning Flash CS4 Pro, and I am a bit confused by something.

  I created a swf file after going through some tutorials Adobe.TV.

  When I fall into my Firefox window, it opens and reads, but it gives me the following warning:

  

  I do not understand why he would try to communicate with the Internet, I have only a few forms, a swf animation, and a button.

  Please notify.

  Thank you

  The problem isn't your .swf or .fla file. Local content Flash Player Security limited network communication for certain types of content that is stored on your local computer, unless you give permission.

  You need to change your security settings for flash.

  ... If you want to test .swf locally which have links with the internet... buttons are usually...

  http://kb2.Adobe.com/CPS/135/13530cdd.html

  http://kb2.Adobe.com/CPS/093/4c093f20.html