Question of ML350 G5 with creating a 2nd table
Happens the following thing:
We have 2 servers, two ML350 G5. Both with 1 3 equal to HARD drive HARD drive Bay. It's the primary system partition.
Now, we wanted to add another disk HARD table in both servers (in 2 equal HDD).
It doesn't matter if we do this BIOS pit or berries HP management. The result is the same if restart us: NO OPERATING SYSTEM FOUND.
We do not seem to pass the 2 different tables. Is there someone who knows this problem?
It will be directed toward the business section
Tags: Notebooks
Similar Questions
-
Cannot create the 2nd partition
OS x 10.8.5
attempted to create a 2nd partition for El Capitan
Started in recovery partition
open disk utility
Click on the (+) sign to create a new partition
partitioning began
says the disk that shrink
crashed - had to force reboot
Started in single-user mode
Run fsck - fy
disc repaired
I tried partitioning again
After a long time, a message says that it na not create partition
of course now I have even more afraid of putting at level m...
is there something wrong with my HARD drive? If she wrote on the site of data?
(OS X 10.8 was a clean install after a failed upgrade)
in any case, is it possible to divide this drive? (clean install of El Cap would be nice but is not worth it because it might be too slow for me - early 2009 iMac)
How much free disk space do you have?
-
Hi, my, library, has been damaged, so I have, open, a, FCP BU library and this worked well, so my, question, is, what, do, with, the, old, library,?, is, always, workin g throughout, with, a, I have used?, or, well, I have, open, BU, one, i, used, each, times, I, open, my, project?
Rename your backup library in order to take account of the original, and then delete the original.
FYI: Identification will facilitate a slightly different name.
Al
-
I'm looking to move from Windows/Apple/Logic Pro X and Cubase Cubase.
My questions have to do with the current (2014) Mac mini, specifically the i5 $999 2.8 GHz with 8 GB of RAM.
This computer will be powerful enough to run Logic Pro X DAW and Cubase 8 courses without any problem?
I would say yes, but I post here too:
-
On my Mac Book Pro to always stop get question "continue application"? with the boxes option to cancel or continue the request.
Selection of abandonment does not prevent the following message appears when closing next down.
Activity monitor shows all the applications that you have
installed, running in the background? Something can be...
If you open the force quit, are there topics other than the Finder
and maybe a browser?
You repaired the disk from disk utility permissions lately?
We could also see other boot options on the use in
Recovery of OS X to use the "OS X Utilities" in there. Be careful.
Is there more than one user account on your computer? If you
Start in another user account and have auto login for
the fact that it is one that rises at the start, a piece
similar issues or is it just works fine on shut down?
The question may take some trial and error troubleshooting. This
may include some basic startup keyboard shortcuts for
the computer to start in Safe Mode, to do more test, etc.
If you have access to an official Apple store, you can be
able to set up an engineering appointment & have someone closer.
Good luck anyway...
-
I read this topic (I have a lot of questions about Xperia Z2 with lollipop)
Hello world. I read this topic (I have a lot of questions about Xperia Z2 with lollipop) and I have posted a question, but it seems that no one saw him. That means the following: (how can I install the source application unknown to other users in my phone because it is to the unknown source menu is disabled in the settings-> Security)? This means that I can not install all the apps if I switch to the lollipop? Can someone tell me please the exact meaning of this?
Thank you.
It's true, but game store will not need this option checked - loading of a file manager will - but which is not say that the application will work once installed
-
. Hello everyone, I need help with creating a dynamic region in jdeveloper 11.1.2.3 version
What JDK you are using?
You are probably using an old version of the JDK, that class while compiled under JDK 1.7.0
For example, work with the correct version, and it will be fine...
-
HP ML350 G5 with processor E5430
I am looking at buying a server to run ESXi on some rights reduced
VM when I look at the HCL, I see as a HP ML350 G5 with an E5440
processor is supported, but not an E5430. Although, if I click on the
E5440, it lists it as a "E5400 Series" chipset. Should I expect
To work on the E5430 just as well as on an E5440 ESXi? How much of a
risk that I am running in getting do not something that is explicitly registered on
in the HCL database?
Thank you!
Hello.
I use the 5430 on Dell PE2950 III processor. This processor work worked well for months and is very very good.
-
Problem with create table as select (DEC)
Hello
We try to data cleaning of huge tables. And a customer of guise is reanme main table to the backup table. Then create a master table in select * backup table with some test.
Now the problem with create table select, is that it creates the table without indexes and constraints. Is it possible to use the ETG (create the select table) with the same structure that he was the (all index, constriaints).
Or any other solution to solve this problem?
Thanks in advanceSweety wrote:
HelloWe try to data cleaning of huge tables. And a customer of guise is reanme main table to the backup table. Then create a master table in select * backup table with some test.
Now the problem with create table select, is that it creates the table without indexes and constraints. Is it possible to use the ETG (create the select table) with the same structure that he was the (all index, constriaints).
Or any other solution to solve this problem?
Thanks in advance
No, this is not possible. You need to get the manuscript of dependent object and create it manually.
-
Hi all
I created the following table:
Now, I want to write a query that returns the names that consist only of letters. So I wrote:CREATE TABLE names( name VARCHAR2(10)); INSERT INTO names(name) VALUES('dariyoosh'); INSERT INTO names(name) VALUES('John'); INSERT INTO names(name) VALUES('Peter'); INSERT INTO names(name) VALUES('Frank'); INSERT INTO names(name) VALUES('Bernard250'); INSERT INTO names(name) VALUES('Jack12');
However, this also returns alphanumeric names. I don't understand why, because I know (please, correct me if I'm wrong)SELECT name FROM names WHERE REGEXP_LIKE(name, '[[:alpha:]]+');
refers only to letters, no?[[:alpha:]]
You kindly could guide me where I made a mistake in my query?
Thanks in advance
:)Hello
Connected to Oracle Database 10g Express Edition Release 10.2.0.1.0 Connected as hr SQL> SQL> SELECT NAME 2 FROM names 3 WHERE REGEXP_LIKE(NAME, 4 '^[[:alpha:]]+$'); NAME ---------- dariyoosh John Peter Frank SQL>
Kind regards
-
I have a problem with a CS6 dynamic table creation
I have 2 tables, 1 of them is caled 'user', the other a "cars" they are inked with a foreign key in the table of cars there is a column called UserID and takes the value of "user", so my question is I tried to make it dynamic table when the user is connected to display its cars that have his Userid on them only unfortunetly when I do this I get a blank table with nothing in it anyone can help me solve this problem. This is the code I use:
<? php require_once('Connections/MyConnection.php');? >
<? PHP
initialize the session
If (! isset {})
session_start();
}
* Log out the current user. **
$logoutAction = $_SERVER ['PHP_SELF']. » ? doLogout = true;
If ((isset & & ($_SERVER ['QUERY_STRING']! = "")) {})
$logoutAction. = '& '. htmlentities($_SERVER['QUERY_STRING']);
}
{If ((isset($_GET['doLogout'])) & & ($ {_GET ['doLogout'] == "true"))}
to completely disconnect a visitor, you must delete the session varialbles
$_SESSION ['MM_Username'] = NULL;
$_SESSION ['MM_UserGroup'] = NULL;
$_SESSION ['PrevUrl'] = NULL;
unset($_SESSION['MM_Username']);
unset($_SESSION['MM_UserGroup']);
unset($_SESSION['PrevUrl']);
$logoutGoTo = "/ cars/LogOut.php";
If {($logoutGoTo)
Header ("Location: $logoutGoTo");
"exit";
}
}
? >
<? PHP
If (! isset {})
session_start();
}
$MM_authorizedUsers = '1', 2;
$MM_donotCheckaccess = "false";
Restrict access to Page: grant or deny access to this page
Function isAuthorized ($strUsers, $UserGroup, $strGroups, $UserName) {}
For safety, first assuming that the visitor is NOT allowed.
$isValid = false;
When a visitor is connected to this site, the MM_Username of Session variable value equal to their username.
So, we know that a user is NOT logged if this Session variable is empty.
If (! empty ($UserName)) {}
In addition to being connected, you can restrict access to only certain users based on a created ID when they connect.
Analyze the channels in the tables.
$arrUsers = explode (",", $strUsers);
$arrGroups = explode (",", $strGroups);
If (in_array ($UserName, $arrUsers)) {}
$isValid = true;
}
Or, you can restrict access to only certain users based on their user name.
If (in_array ($UserGroup, $arrGroups)) {}
$isValid = true;
}
If (($strUsers == "") & & false) {}
$isValid = true;
}
}
return $isValid;
}
$MM_restrictGoTo = "/ cars/Home.php";
If (!) {(((isset($_SESSION['MM_Username']))) & & (isAuthorized ("", $MM_authorizedUsers, $_SESSION ['MM_Username'], {$_SESSION ['MM_UserGroup']})))}
$MM_qsChar = ';?
$MM_referrer = $_SERVER ['PHP_SELF'];
If (strpos ($MM_restrictGoTo, "?")) $MM_qsChar = "&";
If (isset($_SERVER['QUERY_STRING']) & & strlen($_SERVER['QUERY_STRING']) > 0)
$MM_referrer. = « ? ». $_SERVER ['QUERY_STRING'];
$MM_restrictGoTo = $MM_restrictGoTo. $MM_qsChar. "accesscheck =". UrlEncode ($MM_referrer);
Header ("Location:".) $MM_restrictGoTo);
"exit";
}
? >
<? PHP
If (! function_exists ("GetSQLValueString")) {}
function GetSQLValueString ($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
{
If (via PHP_VERSION < 6) {}
$theValue = get_magic_quotes_gpc()? stripslashes ($TheValue): $theValue;
}
$theValue = function_exists ("mysql_real_escape_string")? mysql_real_escape_string ($TheValue): mysql_escape_string ($theValue);
Switch ($theType) {}
case 'text ':
$theValue = ($theValue! = "")? « " ». $theValue. "" "": "NULL";
break;
case "long":
case "int":
$theValue = ($theValue! = "")? intval ($TheValue): 'NULL ';
break;
case "double":
$theValue = ($theValue! = "")? doubleVal ($TheValue): 'NULL ';
break;
case "date":
$theValue = ($theValue! = "")? « " ». $theValue. "" "": "NULL";
break;
case "set":
$theValue = ($theValue! = "")? $theDefinedValue: $theNotDefinedValue;
break;
}
Return $theValue;
}
}
If (! function_exists ("GetSQLValueString")) {}
function GetSQLValueString ($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
{
If (via PHP_VERSION < 6) {}
$theValue = get_magic_quotes_gpc()? stripslashes ($TheValue): $theValue;
}
$theValue = function_exists ("mysql_real_escape_string")? mysql_real_escape_string ($TheValue): mysql_escape_string ($theValue);
Switch ($theType) {}
case 'text ':
$theValue = ($theValue! = "")? « " ». $theValue. "" "": "NULL";
break;
case "long":
case "int":
$theValue = ($theValue! = "")? intval ($TheValue): 'NULL ';
break;
case "double":
$theValue = ($theValue! = "")? doubleVal ($TheValue): 'NULL ';
break;
case "date":
$theValue = ($theValue! = "")? « " ». $theValue. "" "": "NULL";
break;
case "set":
$theValue = ($theValue! = "")? $theDefinedValue: $theNotDefinedValue;
break;
}
Return $theValue;
}
}
$maxRows_cars = 10;
$pageNum_cars = 0;
If (isset($_GET['pageNum_cars'])) {}
$pageNum_cars = $_GET ['pageNum_cars'];
}
$startRow_cars = $pageNum_cars * $maxRows_cars;
$colname_cars = "-1";
If (isset($_SESSION['MM_Username'])) {}
$colname_cars = $_SESSION ['MM_Username"];
}
@mysql_select_db ($database_MyConnection, $MyConnection);
$query_cars = sprintf ("" SELECT * FROM cars WHERE UserID = %s ", GetSQLValueString ($colname_cars,"int")");
$query_limit_cars = sprintf ("%s LIMIT %d, %d", $query_cars, $startRow_cars, $maxRows_cars);
$cars = mysql_query ($query_limit_cars, $MyConnection) or die (mysql_error ());
$row_cars = mysql_fetch_assoc ($cars);
If (isset($_GET['totalRows_cars'])) {}
$totalRows_cars = $_GET ['totalRows_cars'];
} else {}
$all_cars = mysql_query ($query_cars);
$totalRows_cars = mysql_num_rows ($all_cars);
}
$totalPages_cars = ceil($totalRows_cars/$maxRows_cars)-1;
$colname_user = "-1";
If (isset($_SESSION['MM_Username'])) {}
$colname_user = $_SESSION ['MM_Username"];
}
@mysql_select_db ($database_MyConnection, $MyConnection);
$query_user = sprintf ("SELECT * FROM 'user' WHERE Email = %s", GetSQLValueString ($colname_user, "text") ");
$user = mysql_query ($query_user, $MyConnection) or die (mysql_error ());
$row_user = mysql_fetch_assoc ($user);
$totalRows_user = mysql_num_rows ($user);
$colname_user = "-1";
If (isset($_SESSION['MM_Username'])) {}
$colname_user = $_SESSION ['MM_Username"];
}
@mysql_select_db ($database_MyConnection, $MyConnection);
$query_user = sprintf ("SELECT FirstName, LastName FROM 'user' WHERE Email = %s", GetSQLValueString ($colname_user, "text") ");
$user = mysql_query ($query_user, $MyConnection) or die (mysql_error ());
$row_user = mysql_fetch_assoc ($user);
$colname_User = "-1";
If (isset($_SESSION['MM_Username'])) {}
$colname_User = $_SESSION ['MM_Username"];
}
@mysql_select_db ($database_MyConnection, $MyConnection);
$query_User = sprintf ("SELECT * FROM 'user' WHERE Email = %s", GetSQLValueString ($colname_User, "text") ");
$User = mysql_query ($query_User, $MyConnection) or die (mysql_error ());
$row_User = mysql_fetch_assoc ($User);
$colname_User = "-1";
If (isset($_GET['MM_Username'])) {}
$colname_User = $_GET ['MM_Username"];
}
@mysql_select_db ($database_MyConnection, $MyConnection);
$query_User = sprintf ("SELECT * FROM 'user' WHERE Email = %s", GetSQLValueString ($colname_User, "text") ");
$User = mysql_query ($query_User, $MyConnection) or die (mysql_error ());
$row_User = mysql_fetch_assoc ($User);
$colname_User = "-1";
If (isset($_SESSION['MM_Username'])) {}
$colname_User = $_SESSION ['MM_Username"];
}
@mysql_select_db ($database_MyConnection, $MyConnection);
$query_User = sprintf ("SELECT * FROM 'user' WHERE Email = %s", GetSQLValueString ($colname_User, "text") ");
$User = mysql_query ($query_User, $MyConnection) or die (mysql_error ());
$row_User = mysql_fetch_assoc ($User);
$colname_User = "-1";
If (isset($_SESSION['MM_Username'])) {}
$colname_User = $_SESSION ['MM_Username"];
}
@mysql_select_db ($database_MyConnection, $MyConnection);
$query_User = sprintf ("SELECT * FROM 'user' WHERE UserID = %s", GetSQLValueString ($colname_User, "int") ");
$User = mysql_query ($query_User, $MyConnection) or die (mysql_error ());
$row_User = mysql_fetch_assoc ($User);
? >
< ! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" > ""
" < html xmlns =" http://www.w3.org/1999/xhtml ">
< head >
< link href = "CSS/Layout.css" rel = "stylesheet" type = "text/css" / > "
< link href = "CSS/Menu.css" rel = "stylesheet" type = "text/css" / > "
"< link href="/Cars/CSS/VerticalMenu.css "rel ="stylesheet"type =" text/css"/ >
< meta http-equiv = "Content-Type" content = text/html"; charset = utf-8 "/ >"
< title > Untitled Document < /title >
< / head >
< body >
< div id = 'Holder' >
< div id = "Header" >
< div id = "HeaderContentRight" >
< table width = "0" border = "0" align = "right" >
< b >
< td > logged in as: <? PHP echo $row_user ["FirstName"];? > <? PHP echo $row_user ['name'];? > < table >
< td > < a href = "<?" PHP echo $logoutAction? > "> sign out < /a > < table >"
< /tr >
< /table >
< / div >
< / div >
< div id = "NavBar" >
< nav >
< ul >
"< li > < a href="/Cars/HomeAccount.php "> home < /a > < /li >
< /ul >
< / nav >
< / div >
< div id = "Content" >
< div id = "PageHeading" >
Welcome < h1 >, <? PHP echo $row_user ["FirstName"];? > <? PHP echo $row_user ['name'];? >! < / h1 >
< / div >
< div id = "ContentLeft" >
Control Panel < h6 > < / h6 >
< p > < / p >
< ul id = "MyMainMenu" >
< li > < a href="/Cars/Account.php" > account < /a > < /li > ".
< li > < a href="/Cars/UpdateAccount.php" > update account < /a > < /li > ".
< li > < a href="/Cars/CarManagment.php" > car management < /a > < /li > ".
< /ul >
< / div >
< div id = "ContentRight" >
< table border = "1" align = "center" >
< b >
CarBrand < td > < table >
CarModel < td > < table >
YearOfProduction < td > < table >
< /tr >
<? PHP {? >}
< b >
< td > <? PHP echo $row_cars ["CarBrand'];? > < table >
< td > <? PHP echo $row_cars ["CarModel'];? > < table >
< td > <? PHP echo $row_cars ["YearOfProduction"];? > < table >
< /tr >
<? PHP} while ($row_cars = mysql_fetch_assoc ($cars));? >
< /table >
< / div >
< / div >
< div id = "Footer" > < / div >
< / div >
< / body >
< / html >
<? PHP
mysql_free_result ($CARS);
mysql_free_result ($User);
? >
Thank you for your time!
Nowhere on this page I see that you have found the "UserID" variable that is used to query the database of cars everywhere.
You must get that table "user" when a successful connection occurred.
Go to your login page and find the code which queries the database (it will look something like the below, your request will be slightly different)
$LoginRS__query = sprintf ("SELECT username, password loginUsers WHERE username = %s AND password is %s",
MAKE SURE YOU add to THE QUERY "UserID" (see below.) This is the column of your 'user' table and the foreign key record unique identifier in your table 'cars')
$LoginRS__query = sprintf ("SELECT UserID, username, password AND password loginUsers WHERE username = %s is %s",
Then, find the lines of code below:
$LoginRS = mysql_query ($LoginRS__query, $MyConnection) or die (mysql_error ());
$loginFoundUser = mysql_num_rows ($LoginRS);
Include these two lines of code directly after the above code:
$row = mysql_fetch_assoc ($LoginRS);
$UserID = $row ['UserID']
Can find these lines of code:
If {($loginFoundUser)
$loginStrGroup = "";
Declare two session variables and assign them
$_SESSION ['MM_Username"] = $loginUsername;
$_SESSION ["MM_UserGroup"] = $loginStrGroup;
Add this line of code directly after the above code:
$_SESSION ['username'] = $UserID;
Now, go to the login page of success (whatever you call that)
Find the code at the top of the page below:
If (! isset {})
session_start();
}
Add the line of code below:
If (! isset {})
session_start();
$userID = $_SESSION ['username'];
}
Look for the query:
@mysql_select_db ($database_MyConnection, $MyConnection);
$query_cars = sprintf ("" SELECT * FROM cars WHERE UserID = %s ", GetSQLValueString ($colname_cars,"int")");
$query_limit_cars = sprintf ("%s LIMIT %d, %d", $query_cars, $startRow_cars, $maxRows_cars);
$cars = mysql_query ($query_limit_cars, $MyConnection) or die (mysql_error ());
$row_cars = mysql_fetch_assoc ($cars);
and replace with:
@mysql_select_db ($database_MyConnection, $MyConnection);
$query_query_cars = "SELECT * FROM cars WHERE userID ="$userID "";
$query_cars = mysql_query ($query_query_cars, $MyConnection) or die (mysql_error ());
$row_query_cars = mysql_fetch_assoc ($query_cars);
$totalRows_query_cars = mysql_num_rows ($query_cars);
Now, you can pass the details of the car associated with the user ID in the 'user' table and a foreign key in the table "cars."
You probably want to use a / while loop to get all the information from the database. With a DW repeat region behavior.
-
How triggers can be created in the table?
Hi all
How triggers can be created in the table?
is 12 or as far as we can?There is no technical limit to the number of triggers you set (or, at least, not one that any rational person has never touched). He usually would not make sense to have more than one trigger of a given type on a particular table, even if you can come up with situations where you can have multiple triggers of the same type on a single table.
Normally, when people ask this question, it is because someone (foolishly) he asked in an interview. Frequently, the interviewer is trying to determine if you know how many types of triggers there is no if you know if there are some esoteric limit on the number of triggers.
Justin
-
date max with multiple joins of tables
Looking for expert advice on the use of max (date) with multiple joins of tables. Several people have tried (and failed) - HELP Please!
The goal is to retrieve the most current joined line of NBRJOBS_EFFECTIVE_DATE for each unique NBRJOBS_PIDM. There are several lines by PIDM with various EFFECTIVE_DATEs. The following SQL returns about 1/3 of the files and there are also some multiples.
The keys are PIDM, POSN and suff
Select NBRJOBS. NBRJOBS.*,
NBRBJOB. NBRBJOB.*
of POSNCTL. Inner join of NBRBJOB NBRBJOB POSNCTL. NBRJOBS NBRJOBS on (NBRBJOB. NBRBJOB_PIDM = NBRJOBS. NBRJOBS_PIDM) and (NBRBJOB. NBRBJOB_POSN = NBRJOBS. NBRJOBS_POSN) and (NBRBJOB. NBRBJOB_SUFF = NBRJOBS. NBRJOBS_SUFF)
where NBRJOBS. NBRJOBS_SUFF <>'LS '.
and NBRBJOB. NBRBJOB_CONTRACT_TYPE = 'P '.
and NBRJOBS. NBRJOBS_EFFECTIVE_DATE =
(select Max (NBRJOBS1. NBRJOBS_EFFECTIVE_DATE) as 'EffectDate '.
of POSNCTL. NBRJOBS NBRJOBS1
where NBRJOBS1. NBRJOBS_PIDM = NBRJOBS. NBRJOBS_PIDM
and NBRJOBS1. NBRJOBS_POSN = NBRJOBS. NBRJOBS_POSN
and NBRJOBS1. NBRJOBS_SUFF = NBRJOBS. NBRJOBS_SUFF
and NBRJOBS1. NBRJOBS_SUFF <>'LS '.
and NBRJOBS1. NBRJOBS_EFFECTIVE_DATE < = to_date('2011/11/15','yy/mm/dd'))
order of NBRJOBS. NBRJOBS_PIDMWelcome to the forum!
We don't know what you are trying to do.
You want all of the columns in the rows where NBRJOBS_EFFECTIVE_DATE is the date limit before a given date (November 15, 2011 in this example) for all rows in the result set with this NBRJOBS_PIDM? If so, here is one way:with GOT_R_NUM as ( select NBRJOBS.NBRJOBS.*, NBRBJOB.NBRBJOB.* -- You may have to give aliases, so that every column has a unique name , rank () over ( partition by NBRJOBS.NBRJOBS_PIDM order by NBRJOBS.NBRJOBS_EFFECTIVE_DATE desc ) as R_NUM from POSNCTL.NBRBJOB NBRBJOB inner join POSNCTL.NBRJOBS NBRJOBS on (NBRBJOB.NBRBJOB_PIDM = NBRJOBS.NBRJOBS_PIDM) and (NBRBJOB.NBRBJOB_POSN = NBRJOBS.NBRJOBS_POSN) and (NBRBJOB.NBRBJOB_SUFF = NBRJOBS.NBRJOBS_SUFF) where NBRJOBS.NBRJOBS_SUFF != 'LS' -- Is this what you meant? and NBRBJOB.NBRBJOB_CONTRACT_TYPE ='P' and NBRJOBS.NBRJOBS_EFFECTIVE_DATE <= to_date ('2011/11/15', 'yyyy/mm/dd') ) select * -- Or list all columns except R_NUM from GOT_R_NUM where R_NUM = 1 order by NBRJOBS_PIDM ;
Normally this site does not display the <>inequality operator; He thinks it's some kind of beacon.
Whenever you post on this site, use the other inequality operator (equivalent), *! = *.I hope that answers your question.
If not, post a small example of data (CREATE TABLE and INSERT, only relevant columns instructions) for all the tables involved and the results desired from these data.
Explain, using specific examples, how you get these results from these data.
Always tell what version of Oracle you are using.
You will get better results faster if you always include this information whenever you have a problem. -
How to create a second table containing the first?
I have a table with data source. I would like to create a second table that feeds these data. I will use the second table for the filtered views, etc. I am currently copying a range of cells through, referring to table 1. However, if a new line is added to table 1, it does not table 2. How can I configure things so that any changes - including the new lines/columns would be automatically carried over to table 2?
Table 2 cannot automatically grow the new rows or columns. If you want it to be completely 'automatic', your second table must be as large or larger than your first picture will be never. In other words, there need to additional rows and columns to allow growth. If is not bigger than 1 table, when you add rows or columns to the table 1, you must also manually add rows or columns to the table 2. The problem is that all these lines/additional columns in table 2 will have formulas that are referred to non-existent rows/columns in table 1, which is a mistake. What you do next depends on what you do with table 2. If it is just for display of data and your existing formulas are all as = 1::A1 Table, you can change to = SIERREUR (array 1::A1, "") to get rid of the errors. To hide all blank lines, you can set up a filter to show only the rows where column A is not a space (for example) character. There is no filter to hide additional columns, however.
-
create an external table based on local drive
Hello world
Is it possible to create an external table and that it points to a file on my local drive?
It is perhaps a silly question. I'm sorry.
Thank you
Lydiea
In addition to the response of William Robertson (which is correct), if you do not have a way to make the server access to your local disk, you can use sql loader on your local computer to load the data into an actual table.
Maybe you are looking for
-
Won't start not satellite M300 - system on the disk volume is damaged
OK on the 1st...Today, I turn on my laptop but it just will not start until... stop just at the TOSHIBA LEADING INNOVATION he...and the drive light lit upwards or blink. After that I tried the several times, it starts.When I went into windows, IE ope
-
EliteOne 800: Generic Question to the restoration of the system
There are several tools installed on a new PC when I get it out of the box. I.e. the Manager of recovery or other pre-installed tools. My understanding is as follows: If I have at any point in time, I replace the hard drive with the NEW disk hard emp
-
To access the measured data measures
Hello Somewhere, in order, I do three tests by performing a loop of a group of steps using the ForEach/End statement. One of these steps is a numerical limit test which measures the data I would like to check/get later. If this had been a stage witho
-
My HP Deskjet 3070, model no B611a will not print black. New cartridges have been installed, this test prints made, cleaned print etc but black heads do any print. The HP diagnostic tool seems ocver connectivity issues and a web search has turned up
-
Need help getting reports significant chargeback
I'm trying to understand if there is a way to obtain Chargeback reports more meaningful than what comes out of the box with vFoglight 6.7.1. If I use flat on many levels, I have to create too many different levels and modules (and spend too much tim