question of model creation / insertion

Similar Questions

• Yet another question of model

  Recently, my model started inserting his own repertoire of all the URLs in the site when I update the pages, so:
  
  href = "site/index.htm"
  
  became:
  
  href="site/templates/index.htm".
  
  The links in the site are enterred like this:
  
  href = "Stories.htm"
  
  For a page that is located in the directory of the site. The model transformed into:
  
  href = ' templates/Stories.htm'
  
  This just started happening. Before that, there was no problem. No idea why this happens and what to do about it?
  Of course, none of the work of the image or the links of the CBC.
  
  Help
  
  -Kenoli

  Thanks for your quick response. I'm helping a friend here and what threw me was that it works and then suddenly wasn't. Of course, I don't know what she could do to cause that, even if she is not conscious of having anything other than make a small change and update related files to the model. I discovered that inserting a "... / ' from each link solved the problem. Here are answers to your questions:

  > Are these pages * in * the Templates folder?

  NO.

  > Are you put these links of coding, or by searching for the target files?

  I don't know, but try the method browse inserts the "... / 'syntax in front of the link." (should have tried it immediately)

  > Can we see your template page?

  I think this is resolved, so...

  > DW did only what you tell it to do...

  Gotcha, although, as in life, sometimes we don't know exactly what we said.

  Thank you

  -Kenoli

• Question about the creation of the recovery disc

  Hello
  I bought the new laptop Lenovo G500S (model 20245).
  My licensed Version of Windows is Windows 8 Version 6.2 Build 9200.
  Here are my questions:
  1. when I started to create the recovery disk, mentioned initial information display the image size estimated at 27.6 GB.
  However, the size of recovery disk that was created in my external HARD drive is 16GB only.
  Please let me know what is the size of the expected recovery.
  2. How will I know if I have a recovery partition on my system. The D partition size is 22.4 GB. The contents are Application and drivers.
  Thank you
  Naren

  Hi Naren,

  To create a disc of recovery of the minimum disk space required is 16 GB. Recovery media is a general term for media containing a backup of the original factory condition or a favorable condition for a computer configured by an equipment manufacturer (OEM) or an end user. OEM media allows you to reformat the hard drive and reinstall the operating system and preloaded software, that it was when it was shipped. Typically, if you create a recovery disc, it will have drivers and other applications.

  You can check the link below.

  Methodology to create a recovery media and recharge a Lenovo Think with Microsoft Windows 8 system preload

  http://support.Lenovo.com/en_CA/downloads/detail.page?docid=HT076024

  You can also reference the link below.

  Create a recovery USB disk

  http://Windows.Microsoft.com/en-us/Windows-8/create-USB-recovery-drive

  For further assistance, I suggest you to connect with the community of Lenovo. You can contact them on the link below.

  Lenovo community.

  http://forums.Lenovo.com/

  Email us if you have any other issues related to Windows.

• Question of model clause

  Hello
  
  I was looking oracle documentation but can't find a clear answer. Question under works properly - existing lines are updated, no new documents created.
  

  With T as (
       Select 1 As Person_Id, 'Andrew' As Person_Name, 'HR' As Department From Dual union all
          Select 2 As Person_Id, 'John' As Person_Name, 'SALES' As Department From Dual     
  )
  Select Person_Id, Department, Person_Name, Salary
  From T
  Model          
       Dimension By (Person_id)
       Measures (Department, Person_Name, Cast(null As number) Salary)
       Rules upsert(         
            Salary [1] = 5000,
            Salary [2] = 7000       
       )
  Order By Person_id;

  The same query when person_id is changed to digital text form rather than update the existing lines, creates new ones.
  
  

  With T as (
       Select '1' As Person_Id, 'Andrew' As Person_Name, 'HR' As Department From Dual union all
          Select '2' As Person_Id, 'John' As Person_Name, 'SALES' As Department From Dual     
  )
  Select Person_Id, Department, Person_Name, Salary
  From T
  Model          
       Dimension By (Person_id)
       Measures (Department, Person_Name, Cast(null As number) Salary)
       Rules upsert(         
            Salary ['1'] = 5000,
            Salary ['2'] = 7000       
       )
  Order By Person_id;

  The only remedy is to throw the person_id as varchar2. Below query works correctly again (without new records created).
  
  

  With T as (
       Select cast('1' as varchar2(1)) As Person_Id, 'Andrew' As Person_Name, 'HR' As Department From Dual union all
          Select cast('2' as varchar2(1)) As Person_Id, 'John' As Person_Name, 'SALES' As Department From Dual     
  )
  Select Person_Id, Department, Person_Name, Salary
  From T
  Model          
       Dimension By (Person_id)
       Measures (Department, Person_Name, Cast(null As number) Salary)
       Rules upsert(         
            Salary ['2'] = 5000,
            Salary ['1'] = 7000       
       )
  Order By Person_id;

  If anyone knows the reason for this behavior, please let me know.
  
  Thanks in advance
  
  MJ

  Given that this has worked properly for me in the same version, can guess us maybe it could be something like a settiing parameter.
  For example, something like OPTIMIZER cursor_sharing, query_rewrite_enabled or query_rewrite_expression?

• How to decrease the spacing between shapes and move the form to the top, what model creation brush?

  Hello world

  I am trying to create an external border for some tires and have a few questions about the model of brush.

  I created a solid form and then, with her, a brush model. But I don't want all this spacing between shapes, so is there a way to get rid of the spacing or DECREASE spacing altogether. Currently, it is set at 0%.

  Also, is there a way to raise the forms so that the basic lines of form are placed outside of the ellipse that is drawn? See first image below in the middle of forms at the intersection with the outline of the ellipse drawn.

  Thanks in advance :)

  

  Return to the brush model.

  1. drag the brush from the Panel forms.

  2. with the direct Selection tool or in, select the Panel layers no filling / n ° rectangle race which is located at the back of this group of brush.

  3. adjust (reduce) the width of the rectangle until you find a size that produces the desired gap.

  4. Select the shape of the brush and the no fill / no rectangle STROKE, Opt/Alt-drag on top of the original brush in the Panel shapes.

  Trial and error is valuable here until you see how it works. or you can use specific values.

  To align the bottom edge of the brush with the path:

  With no filling/no STROKE rectangle selected, as indicated above, move it down so that its horizontal axis coincides with the lower edge of the shape of the brush, then Opt/Alt-drag the brush and rectangle again in the Panel forms.

  

  

  Edit: As says Monika.

• Question related to the INSERT statement

  Imagine this scenario:
  
  -table_a has 5 000 000 records at time t1
  
  -table_b is empty at time t1
  
  -At time t1, I execute the following statement:

            insert into table_b
              select * from table_a;
      

  -L' insert statement ends in time t2
  
  -Between t1 and t2, say 3 000 new records have been added to the table_a (by OLTP processes).
  Thus, at time t2, table_a has 5 003 000 records.
  
  My question is, at time t2, the number of records will be in table_b? Will it 5,000,000 or
  5 003 000 or somewhere between these two counts?
  
  I guess it will be 5,000,000 because that is the number when the insert statement
  has started to run.
  
  Any comment is appreciated.

  Syed Ullah says:
  Imagine this scenario:

  -table_a has 5 000 000 records at time t1

  -table_b is empty at time t1

  -At time t1, I execute the following statement:

  insert into table_b
  select * from table_a;
  

  -L' insert statement ends in time t2

  -Between t1 and t2, say 3 000 new records have been added to the table_a (by OLTP processes).
  Thus, at time t2, table_a has 5 003 000 records.

  My question is, at time t2, the number of records will be in table_b? Will it 5,000,000 or
  5 003 000 or somewhere between these two counts?

  I guess it will be 5,000,000 because that is the number when the insert statement
  has started to run.

  Any comment is appreciated.

  At time t2, it is possible that the answer is 0. Once the insert operation finishes (can be any time after t1 in your example, possibly before t2, possibly after) and assuming you checked in the same session where you run the insert, you would see 5 000 000. In other sessions you would continue to see 0 up to what the session who made the done insert one COMMIT.

  http://docs.Oracle.com/CD/E11882_01/server.112/e25789/consist.htm#CNCPT121

  Is something that you should read. He described these concepts much better than what you'll probably find in a few posts on the forum.

• Questions about the creation of a foreign key on a table

  Hello @ll,
  
  during an update of the database, I lost a foreign key between two tables. The tables are called werteart and werteartarchiv_pt. Because of its size, werteartarchiv_pt is a partitioned table. The missing foreign key was a constraint on werteartarchiv_pt table referencing werteart.
  
  Some statistics on the size of the mentioned tables:
  werteart 22 MB
  werteartarchiv_pt 223 GB
  werteartarchiv_pt (Index) 243 GB
  
  I tried to create the foreign key again but it failed with the following error (apologies for the German error message):
  
  sqlplus ORA-00604: Fehler auf rekursiver SQL-ebony 1
  sqlplus ORA-01652: Temp-Segment kann nicht um 128 in Tablespace TEMPS00 judgements
  
  The statement that I used:
  
  ALTER table werteartarchiv_pt
  Add constraint werteartarchiv_pt_fk1
  foreign key (rail, werteartadresse, merkmale)
  Reference werteart (rail, werteartadresse, merkmale)
  on delete cascade
  at the delayed start can be delayed;
  
  So, the problem seems to be that Oracle needs a lot of temporary tablespace to generate foreign key and I do not know how and why.
  
  My questions now are, and I hope that someone is there who can answer all or part of it:
  
  (1) why Oracle should temporary tablespace to create the foreign key? The foreign key uses the same columns as the primary key.
  
  is 2 (a) possible to change the statement without using the temporary tablespace?
  
  2 (b) if it is not possible to avoid the use of temporary storage space, is there a formula how to calculate the necessary temporary tablespace?
  
  (3) is it possible to modify data in tables while the foreign key is created or is the whole table locked during the process?
  
  Any help or advice is appreciated.
  
  Kind regards
  Bjoern

  RollinHand wrote:
  My questions now are, and I hope that someone is there who can answer all or part of it:

  (1) why Oracle should temporary tablespace to create the foreign key? The foreign key uses the same columns as the primary key.

  Because it is data validation to ensure that the foreign key are violated. If you had specified NOVALIDATE ACTIVATE in its creation then the existing data in the table should be checked and the statement must fill out instantly (future data added is enabled by the constraint).

  http://download.Oracle.com/docs/CD/B28359_01/server.111/b28310/general005.htm

  Search for "Enable Novalidate constraint State"

• Difficult question: keep model of FTP files

  First of all, I want to say hello to anyone reading this thread, I'm new to the forum and I hope to help as much as I can in getting the help I need!

  With that issue aside, here is my problem.

  I took during the development of a corporate Web site and have just learned that the previous developer had very little to transfer through.  I could catch pretty well everything what I needed once I had FTP access.  However, I can't locate or get their hands on the model files used to create the site.

  The site was created in goLive, which I don't think there is more.  I see the template file used on all htm pages, but I can't find the file anywhere on the server.

  I was under the assumption that you need the templates on the server, perhaps that this was not the case in the days of goLive?

  The only thing I noticed COULD be the reason why they are not required is all pages (htm file) use the full coding of the template at the top of the page (in the footer). It's grayed out and not editable, but it seems to compile.

  My questions are,

  (1) someone can enlighten me on this question (should I look elsewhere for model files)?

  (2) would be bad practice if I took one of the pages, it detaches the model, deleted content then produced a model from this file?

  Sorry if my problem is confused, I tried to explain it the best I can!

  Thanks for reading and look forward to your response,.

  Robbeh

  Hi Robbeh,

  1. Template files (DWT) are only required in the production environment, no need to be online
  2. It's not bad practice in this case, in fact, this is the recommended method.

  GRAMPS

• I have question for models

  Bit of a rookie. I do not know if I go about it the correct way.  Any advice is all just great.

  I created a html Web page.  I used a lot of div and css to manipulate the content, images, and videos and position them correctly in my Web page.

  I need now about 4 other pages to clone the original.  I want the images and video to be modified on an individual basis, but I need the posts of css, menus and such update (sorry I don't know the right word) like a domino effect.  If I put on the page of the model, they are all up to date.

  I saved the original .html as model page and selected from all regions should I make can be changed on individual basis.

  However, I have a base level div that has a background image associated with it.  I want it to be a change 'domino '.  I want that it appears in each version based on a model of the original and remain the same as the original.  However, when I apply the model to an empty HTML page, the image not placed in the new Web page.  Everything else is OK.  The div and CSS seem good but not images.

  I chose not as an editable region.

  What I forget?

  I hope that all the senses.

  
  Thanks for any help in advance.

  -Drew

  If I create a Web page locally on my machine, DW keeps local address until I publish.

  No - is not correct.  If you make a Web page locally, DW written the correct path to the file target at the moment you save the new file in the site - at this stage DW can know what this track must be.  All files in your site MUST have one of the three types of links they contain-

  1. the parent document (that is, the path starts with the current location of the file)

  2. relative root (that is, the path starts at the root of the site)

  3. absolute (i.e. the path is a full URI)

  If you see a file:/// path in any link, then you have a problem.

  To make a model, you can use any workflow you want, but it should be generally A) create a new page, B) to build the base layout on the page and C) save the page as a template.  Having done this, you can then lay in the editable regions and resave before you start generating pages of your child.

  Then I have to create a model of a Web page that is already published?

  If you follow my previous reviews, you will know that the answer here is NOT (there are no value to a model published in any case).

  Is there a setting inside DW to DW to change all directories to be parent instead of local once published?

  N ° although you could build a search and replace that would do this for you (only if you changed links of root, however).

  I have about 10 pages child html which are all based on the parent template.  I was hoping that all THE items on the parent page would affect the child pages, if I so wish. I was hoping that if I add or remove images, css, html, video, flash of the parent and all the child pages would be updated as well (as far as these articles are editable

  Here, you are completely wrong.  The concept that escapes you is the following:

  EVERYTHING on a template page is editable.  Only the changes in the regions NON MODIFIABLES models will be spread child pages.  If such was not the case, you might have never contained unique on a page of the child!  Make sure you understand this before your work is further.

  The question that I am running is that the parent page works fine.  However, when I publish the child pages remain local directories...

  It is a problem with your site definition.  DW is the thought that your children pages are NOT in the folder root of your site.

• Sony NEX raster question noise model

  I me in treatment of some files today and noticed the bottom half tone / model of armour in an area of my image.  I treated the same file in Sony Image Data Converter and the question isn't here then this is definitely an issue unique to Adobe raw converter.  Seems if poster only this transitional tonal area very smooth, nowhere else in the file.  It was pretty noticeable at the sight of 50% to get my attention in the first place.  The example linked below is enlarged 200% with the cab on the left and Sony IDC on the right. Seems to be rare because it first I encountered this.  This explanation was given to me by a member not adobe in another forum:

  "There is a setting in camera DNG ACR/LR green channels profiles called"BayerGreenSplit", which tells the engine to tween to wait a small gap between the two and does not build"grid-patterns"like the ones you see here.  For some reason any, that I can't understand, they declined / to zero this parameter for several Sony cameras in the latest version 6.2/3.2. You can set the parameter between 0-5000. This is an arbitrary value, I don't know what it means in fact of a top scientific - except that no difference is '0' and '5000' a very big difference. »

  Is this the cause and this bug will appear in the next version of ACR and Lightroom? The file is not underexposed or extremely manipulated.

  Larger version here, is to cut and paste into the browser to see the whole picture as it appears at 200%: http://www.gibranstudio.com/adobenex.jpg

  Below the embedded version is what image culture looks like 100% on screen when clicked:

  

  Known problem with the NEX and ACR/Lightroom.

  Unfortunately, STC profiles have BayerGreenSplit in them, so you can't set this way.

  However, until Adobe fix it, there is a solution for the model of labyrinth, if you don't mind some extra steps to your workflow: http://sites.google.com/site/cornerfix/using-cornerfix/maze-patterns-1

  The PCF file '500' seems to work on the images of NEX, I tried.

  Sandy

• ASA question routing models!

  Hello!

  I have a question about the routing function in ASA 5500. Scenario: the asa (inside int 192.168.1.1) is in default gateway for all inside nodes. We also have another network (192.168.2.0) inside, the asa route traffic to the net via only inside interface (192.168.1.1) can I know the pix dose NOT load this routing scenario, the asa will do?

  Cordially /Jonny

  Hi Jonny,

  It clarifies your question? If so, close the post, which may be useful to others.

  Concerning

  REDA

• Model creation of wsdl error

  Hello world
  
  I'm new user for JDeveloper, I use Oracle JDeveloper 11.1.1.2g to consume a web service deployed the repository for the integration of E-Business Suite.
  
  I have a WSDL for the service. I can see the wsdl document and I tested it in the SOAPUI also, WSDL works.
  
  However, when I create a new Web Service Proxy in JDeveloper, it presents us with the following error:
  ===============================================================================
  ##########################
  The title of the error:
  ##########################
  Validation failed
  
  ##########################
  Text of the error:
  ##########################
  
  oracle.jdeveloper.webservices.model.WebServiceException: error creating the model of wsdl "http://host.domain.com:port / webservices/plsql/SOAProvider/per_absence_record /? WSDL': org.apache.xerces.impl.xs.XMLSchemaLoader.loadGrammer (Lorg/apache/xerces/number/Analyzer/XMLInputSource ;) V
  
  ##########################
  Error stack:
  ##########################
  
  oracle.jdeveloper.webservices.model.WebServiceException: error creating the model of wsdl "http://host.domain.com:port / webservices/plsql/SOAProvider/per_absence_record /? WSDL': org.apache.xerces.impl.xs.XMLSchemaLoader.loadGrammar ([Lorg/apache/xerces/number/Analyzer/XMLInputSource ;) V
  at oracle.jdeveloper.webservices.model.java.JavaWebService.createPortTypes(JavaWebService.java:1635)
  at oracle.jdeveloper.webservices.model.WebService.createServiceFromWSDL(WebService.java:2846)
  at oracle.jdeveloper.webservices.model.WebService.createServiceFromWSDL(WebService.java:2611)
  to oracle.jdeveloper.webservices.model.java.JavaWebService. < init > (JavaWebService.java:509)
  to oracle.jdeveloper.webservices.model.java.JavaWebService. < init > (JavaWebService.java:461)
  to oracle.jdeveloper.webservices.model.proxy.WebServiceProxy$ ProxyJavaWebService. < init > (WebServiceProxy.java:2268)
  at oracle.jdeveloper.webservices.model.proxy.WebServiceProxy.updateServiceModel(WebServiceProxy.java:1701)
  at oracle.jdeveloper.webservices.model.proxy.WebServiceProxy.setDescription(WebServiceProxy.java:525)
  at oracle.jdevimpl.webservices.wizard.jaxrpc.proxy.ProxyJaxWsSpecifyWSDLPanel.setDescription(ProxyJaxWsSpecifyWSDLPanel.java:238)
  at oracle.jdevimpl.webservices.wizard.jaxrpc.common.SpecifyWsdlPanel.buildModel(SpecifyWsdlPanel.java:1109)
  to oracle.jdevimpl.webservices.wizard.jaxrpc.common.SpecifyWsdlPanel$ 5.run(SpecifyWsdlPanel.java:661)
  at oracle.ide.dialogs.ProgressBar.run(ProgressBar.java:655)
  at java.lang.Thread.run(Thread.java:619)
  Caused by: oracle.jdeveloper.webservices.tools.WsdlValidationException: error in creating the model of wsdl "http://host.domain.com:port / webservices/plsql/SOAProvider/per_absence_record /? WSDL': org.apache.xerces.impl.xs.XMLSchemaLoader.loadGrammar ([Lorg/apache/xerces/number/Analyzer/XMLInputSource ;) V
  at oracle.jdevimpl.webservices.tools.wsa.WsaAdaptor.newWsdlValidationException(WsaAdaptor.java:825)
  at oracle.jdevimpl.webservices.tools.wsa.WsaAdaptor.getSeiInfo(WsaAdaptor.java:515)
  at oracle.jdeveloper.webservices.tools.WebServiceTools.getSeiInfo(WebServiceTools.java:523)
  at oracle.jdeveloper.webservices.model.java.JavaWebService.getSeiInfo(JavaWebService.java:1741)
  at oracle.jdeveloper.webservices.model.java.JavaWebService.createPortTypes(JavaWebService.java:1496)
  ... 12 more
  Caused by: oracle.j2ee.ws.common.tools.api.ValidationException: error in creating the model of wsdl "http://host.domain.com:port / webservices/plsql/SOAProvider/per_absence_record /? WSDL': org.apache.xerces.impl.xs.XMLSchemaLoader.loadGrammar ([Lorg/apache/xerces/number/Analyzer/XMLInputSource ;) V
  at oracle.j2ee.ws.tools.wsa.jaxws.JaxwsWsdlToJavaTool.getJAXWSModel(JaxwsWsdlToJavaTool.java:664)
  at oracle.j2ee.ws.tools.wsa.WsdlToJavaTool.createJAXWSModel(WsdlToJavaTool.java:475)
  at oracle.j2ee.ws.tools.wsa.Util.getJaxWsSeiInfo(Util.java:1357)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  to oracle.jdevimpl.webservices.tools.wsa.Assembler$ $2 1.invoke(Assembler.java:218)
  to $Proxy35.getJaxWsSeiInfo (Unknown Source)
  at oracle.jdevimpl.webservices.tools.wsa.WsaAdaptor.getSeiInfo(WsaAdaptor.java:505)
  ... 15 more
  Caused by: java.lang.NoSuchMethodError: org.apache.xerces.impl.xs.XMLSchemaLoader.loadGrammar ([Lorg/apache/xerces/number/Analyzer/XMLInputSource ;) V
  at org.apache.xerces.jaxp.validation.XMLSchemaFactory.newSchema (unknown Source)
  at com.sun.tools.xjc.reader.internalizer.DOMForest.weakSchemaCorrectnessCheck(DOMForest.java:487)
  at com.sun.tools.xjc.api.impl.s2j.SchemaCompilerImpl.bind(SchemaCompilerImpl.java:227)
  at com.sun.tools.xjc.api.impl.s2j.SchemaCompilerImpl.bind(SchemaCompilerImpl.java:85)
  at oracle.j2ee.ws.common.tools.databinding.jaxb20.JAXB20TypeGenerator.generateJavaTypes(JAXB20TypeGenerator.java:117)
  at oracle.j2ee.ws.tools.wsa.SchemaTool.genValueTypes(SchemaTool.java:186)
  at oracle.j2ee.ws.tools.wsa.jaxws.JaxwsWsdlToJavaTool.getJAXWSModel(JaxwsWsdlToJavaTool.java:647)
  ... 24 more
  
  
  ===============================================================================
  
  Please suggest your advice.
  
  With respect,
  KSD

  Hello

  It is a recommended approach to have proxies in separate projects. When keep you them in the same project, in some corner cases, the generator (try) replaces files and this can cause inconsistencies. If you must have multiple proxies in the same project, and then try to keep the package root for the generated only types and see if that helps. Otherwise, you will need to separate.

  Thank you
  Vishal

• Acrobat 9.3.4 question: unique PDF creation of several PDF

  Hey all,.

  My configuration:

  • Mac OS 10.6.4 / Mac Pro dual / 6 GB of RAM

  • Adobe CS5 Master Collection

  • Acrobat 9.3.4 Pro

  Just came across the (critical) question, I have not met before, but it is terribly reminiscent of the problem of the "policies of the Document" file issues and small caps Caps/All InDesign CS5. Here's the scenario:

  1. in a document of IDCS5 I used the command "Uppercase" to give a position this feature (font is future 95 black; type 1).

  2 export to PDF (Print) and receive a correct PDF, with the designation of all caps display/printing correctly.

  3. open in Acrobat 9.3.4 and Adobe Reader 9.3.4, and the file is correct (see attachment 1, below).

  4. I then do several other single-page PDF documents and keep them all in a new folder.

  

  After you create these PDF files single page to review the customer, the customer asked that a random number of these PDF files be compiled into one PDF, which isn't a problem - it's a common request, we do all the time. The steps to do this are:

  1. launch Acrobat 9.3.4 Pro

  2. Choose file > create PDF > merge files into a single file PDF. dialog box appears.

  3. click on the 'Add files' button in the upper left corner of the dialog box (the single PDF button is selected at the top right of the box).

  4 navigation window opens, allowing me to choose the folder created in step 4, above, that contains PDF files, I need.

  5. turn on highlight PDF files you want and arrange them in the order you want. Click the 'Combine files' button in the lower right corner of the dialog box. 6 PDF files is generated, and I save the file PDF. I then open it in Adobe Reader 9.3.4 or Acrobat Pro 9.3.4 to check that all is well and to my great disappointment, note the misinterpretation of the line type "All Caps" (see attachment 2, below).

  

  I checked a PDF file that is exported through IDCS5 works correctly, and making the PDF "combined" by a new document IDCS5 and add the necessary pages and export a single PDF works fine, as well. The problem is that the function of «Combine...» "in Acrobat Pro is our workflow, because it allows for a PDF one being combined into one WITHOUT having to set up a new IDCS5 specially for the final PDF document. to do this would require countless file IDCS5 in order to get the pages selected randomly in a single PDF.

  If someone has encountered this problem, and if I forgot one post, my apologies. Thanks in advance...

  See you soon!

  Mikey

  The problem is related to incorporations of fonts. If all of the PDF files contained the game rather than subsets of fonts fonts this would not be a problem. How to approach the problem is to use the PDF optimizer to remove all embeddings of fonts. Then use the preflight to re - integrate fonts.

• Same question different results when insert into one table.

  Hello
  
  I have an insert statement as below.
  
  insert into mid_table_name
  Select seq.nextval key1, Field1, Field2,...)
  Select Field1, Field2 b.test2 a.test1...
  tab1 tab2 a and b
  where a.key1 = b.key1
  and...
  ...
  )
  
  When I run the present, it's inserting less files that actually, the subquery returns.
  
  I noticed that
  
  (1) when I run the subquery, illustrated below, it returns more than 60 lines of k which is what I expect.
  (select Field1, Field2 b.test2 a.test1...
  tab1 tab2 a and b
  where a.key1 = b.key1
  and...
  ...
  )
  
  (2) However, when I run including the outer query, showb below, it returns only about 8 k; the same is get inserted into the table.
  
  Select seq.nextval key1, Field1, Field2,...)
  Select Field1, Field2 b.test2 a.test1...
  tab1 tab2 a and b
  where a.key1 = b.key1
  and...
  ...
  )
  
  
  Any help will be greatly appreciated.
  
  Thank you
  Prep

  You can try this one.

  Select seq.nextval, ff.*
  Select * from)
  Select Field1, Field2 b.test2 a.test1...
  tab1 tab2 a and b
  where a.key1 = b.key1
  and...
  ...
  )
  FF

• Questions concerning the creation of a database of physical intelligence 10 gr 2

  I'll set up a physical standby database in a test environment using both windows 2003 servers. I was wondering if anyone could answer a few questions, on which I do not really understand. I have been through the manual of data protection and as much information I can find online. I may work but wanted to post things that I'm not sure I did quite right.
  
  My tnsnames.ora files.
  
  On my primary database server:
  
  tnsnames.ora # Network Configuration file: F:\oracle\product\10.2.0\db_1\NETWORK\ADMIN\tnsnames.ora
  # Generated by Oracle configuration tools.
  
  PRIMARY =.
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP) (HOST = SERVER1)(PORT = 1521))
  )
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = PRIMARY. Mydomain.com)
  )
  )
  
  STANDBY =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP) (HOST = SERVER2)(PORT = 1521))
  )
  (CONNECT_DATA =
  (SERVICE_NAME = STANDBY. Mydomain.com)
  )
  )
  
  
  On my physical server to the standby database:
  
  tnsnames.ora # Network Configuration file: f:\oracle\product\10.2.0\db_1\NETWORK\ADMIN\tnsnames.ora
  # Generated by Oracle configuration tools.
  
  STANDBY =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP) (HOST = SERVER2)(PORT = 1521))
  )
  (CONNECT_DATA =
  (SERVICE_NAME = STANDBY. Mydomain.com)
  )
  )
  
  PRIMARY =.
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP) (HOST = SERVER1)(PORT = 1521))
  )
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = PRIMARY. Mydomain.com)
  )
  )
  
  My Listener.ora files:
  
  On my primary database server:
  
  listener.ora # Network Configuration file: F:\oracle\product\10.2.0\db_1\NETWORK\ADMIN\listener.ora
  # Generated by Oracle configuration tools.
  
  SID_LIST_LISTENER =
  (SID_LIST =
  (SID_DESC =
  (GLOBAL_DBNAME = PRIMARY. Mydomain.com)
  (ORACLE_HOME = f:\oracle\product\10.2.0\db_1)
  (SID_NAME = primary)
  )
  )
  
  LISTENER =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = server1.mydomain.com) (PORT = 1521))
  )
  
  On my physical server to the standby database:
  
  listener.ora # Network Configuration file: f:\oracle\product\10.2.0\db_1\NETWORK\ADMIN\listener.ora
  # Generated by Oracle configuration tools.
  
  SID_LIST_LISTENER =
  (SID_LIST =
  (SID_DESC =
  (GLOBAL_DBNAME = standby.mydomain.com)
  (ORACLE_HOME = f:\oracle\product\10.2.0\db_1)
  (SID_NAME = sleep)
  )
  )
  
  LISTENER =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = sever2.mydomain.com) (PORT = 1521))
  )
  
  
  I'm not sure I call after creating the control for use in standby file.
  
  A primary server that I created using the:
  
  change the database create controlfile as 'sbcontrol01.ctl ';
  
  I copied the database pfile primary I had created earlier to the standby server, renames and edited.
  
  Initially, I left the CONTROL_FILES = parameter pointing to the control01.ctl, the control02.ctl and the control03.ctl that I restored. But I was getting the error ORA-01665: control file is not a standby control file
  
  So I copied the sbcontrol01.ctl to sbcontrol02 and sbcontrol03.ctl and stressed the CONTROL_FILES = setting at home.
  
  The error disappeared and the database came. I still need to test it even more, but I wanted to see if I was doing the correct or a stroke of luck.
  
  Edited by: tjohnson on March 23, 2009 14:26

  This seems correct, you could have also just named Eve controlfiles to control01, as your principal is 02.etc.