Difficult question: keep model of FTP files

Similar Questions

• Why Windows Explorer (Windows 7 PC to the Server 2003 AD domain) keep crashing when accessing files on a network share.

  1. Why Windows Explorer (Windows 7 PC to the Server 2003 AD domain) keep crashing when accessing files on a network share.

  Hi John,.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the link below.

  http://social.technet.Microsoft.com/forums/en-us/w7itprosecurity/threads

  Hope this information helps.

• Of NI 9802 FTP file transfer

  Hi all

  I am trying to transfer files from data stored in a module NI 9802 (using maps of SD Transcend 2x2gb) mounted on a cRIO 9074 I am facing a problem, very frustrating with my FTP, TCP/IP connection. I will try to be as complete as possible.

  First of all, I know that I can save the data successfully in the SD card as I have full access via ftp://xxx.xx.xx.xxx/u :/, where u is the drive letter assigned to my card. While the ftp windows Explorer I can read, save, move, delete the files in my SD card with no problems at all.

  My problems when I try to do it programmatically using the intermediate features of Labview 2009 FTP. I have attached my test screws for your attention.

  The RIO.vi (running on my cRIO) is the mounting of the SD card, then waits until I press the stop, without disassembly of the map button. I'm pointing this out just to show that the Board IS mounted, while I'm trying to tranfer my files. The host.vi is one running in the local pc and is used to transfer my files via a TCP/IP connection. I put passive FTP connections (had this problem of the active-passive front). I'm in this VI after that I ran the RIO one... Note that while the RIO vi mounted the SD card, I can perform easily all kinds of operations on files in the SD card either windows FTP FTP MAX.

  My host.vi works very well when it comes to list just the files in my SD cards (using, FTP directory list VI, see attachments), however, if I try to copy my files (using FTP retrieve several VI, see attachments) from the SD card to my local PC, I get the following error.

  Error 66: Retrieve the TCP writing in NI_InternetTK_FTP_VIs.lvlib:FTP Command.vi:4-> NI_InternetTK_FTP_VIs.lvlib:FTP [TYPE] .vi-> NI_InternetTK_FTP_VIs.lvlib:FTP Open Data Connection.vi-> data NI_InternetTK_FTP_VIs.lvlib:FTP Receive.vi-> .vi [RETR] NI_InternetTK_FTP_VIs.lvlib:FTP-> NI_InternetTK_FTP_VIs.lvlib:FTP Multiple.vi-> Download_files_from_RIO.vi

  I searched for this error and people seem to be agree that this error is related to TCP/IP in Windows connection problems... Apparently, windows try to establish a connection, but after not get back all the data for a while they cling. However, why am I able to list my files without a problem?  

  It has to do with permissions? If Yes, then how I can change permissions for SD cards options in the NI 9802 module. Your help would be very appreciated...

  Thanks a lot for your time,.

  Harry

  Hi Mike,.

  Thanks for a quick reply. I just managed to solve my problem. I don't know if it was because of your suggestion. Here's how I solved it.

  Used for working with the intermediate FTP functions, I don't even worth as audit - is those. So basically using the 'library' FTP get several files function I now have a fully functional system. For future reference I added my final vi. Note that in this VI I'm everything first transfer my files using the library function of FTP files and then I use the sequence FTP intermediate FTP Open - Logon - delete files - FTP close to get rid of all the files in my card. For some reason, delete the works this way; but copy them does not...

  Thanks again, Mike.

  Harry

• HP 2540: 2540 very difficult Question.

  HP 2540 very difficult question!  Where to place a document on the glass before scanning/printing? (Upper-corner L, R, L corner, lower corner R, center top corner).

  Hello

  You find all brands (for paper formats) along the coast and a symbol that shows you where is the corner?

  Kind regards.

• Why Windows keep moving & hide my files with me?

  original title: make him stop, please stop! Why Windows keep moving & hide my files with me?

  Windows Vista using Media Player 11:

  I am way in music and want to have recorded and named in a certain way.  Sometimes in windows 'Explorer' I group songs into folders according to the albums I create (i.e. mixtures of burning); in this case, I'll keep the names from the same artist and change the name of the album (in properties) that I chose.  As soon as I click on the folder 'Explorer' moves it somewhere, I don't think.  Sometimes things end up in the trash that I know does not recycle.  It also renames my files.  For example, I had a song that I had saved the name of the file is: 01 History.wma; and the rest of the info has been saved in the properties (Album, artist, track number, etc.).  As soon as I turn my head the computer renames it to something that looks like this: 01HistoryAtmosphereSevensTravels - UndergroundRap.wma.  Why it does this and how can I stop it?

  Hello

  ·         It only happens with music files?

  ·         When the issue started?

  Step 1: Run Virus scan.

  Try to scan the computer using Antivirus software because this problem can occur if the computer is infected with the virus. You can do an online scan by clicking on the link http://onecare.live.com/site/en-us/default.htm and clicking on the analysis of a complete Service and accept the agreement.

  Step 2: Rebuild the data base of the media player.

  Follow the steps in http://support.microsoft.com/kb/925718

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Hello! I am a family oriented photographer and have a bit of trouble to keep the colors of files exported between lightroom and photoshop consistent. I edited my images on 5 Lightroom and export TIFF files after ProPhoto color space

  Hello! I am a family oriented photographer and have a bit of trouble to keep the colors of files exported between lightroom and photoshop consistent. I edited my images on 5 Lightroom and export TIFF files after changing color ProPhoto RGB space. Then, I opened a picture at once and changed the settings of Photoshop CC ProPhoto RGB color (under the workspace). When I was editing on photoshop, I tried to export the image, but the colors seemed different, a bit washed out and blue, from the color of the workspace, I was on. I don't know how to solve this problem. Please notify.

  Thank you very much for this! Color sorted

• CaI how hearing SAVE AS in a folder named it keeps saving my document files.

  How can I make hearing SAVE AS in a folder named my choice. It keeps saving my DOCUMENT files.

  When you make your backup, try to type in the path full explicit file in the name field and see if that resets the default file save as. "C:\Users\"yourname"\Desktop\My Sounds\audio.wav".

  There is also the possibility that hearing do not have a space in the name of your folder, when you a save as. try to rename the folder to MySounds without space.

• IP SCAN can be used for ftp files

  
  Hello

  I would like to know, if IP SCAN can be used by clients or applications for FTP files to one of the nodes in database?

  Thank you!

  Hello

  SCAN IP addresses can be used for the ftp, sftp and ssh connection for the cars already running cluster service . Because when the cluster services perform scan ip collage to the public network interface nic for example;

  In the RAC Node1

  Oracle @testdbrac1: / oracle: > ifconfig - a

  eth0 Link encap HWaddr 00:50:56:B8:40:B0

  INET addr:Address IP PUBLIC Bcast:xxx.x.x.xxx mask: 255.255.255.0

  ADR inet6: fe80::250:56ff:feb8:40 b 0 / 64 Scope: link

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  Dropped packets: 1006522 RX errors: 0:0 overruns: 0 frame: 0

  Dropped packets: 92530 TX errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:1000

  RX bytes: 99913091 (95.2 MiB) TX bytes: 32001574 (30.5 MiB)

  eth0:2 Link encap HWaddr 00:50:56:B8:40:B0

  INET addr:SCAN IP_1 Bcast:xxx.x.x.xxx mask: 255.255.255.0

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  In node RAC 2

  Oracle @testdbrac2: / oracle: > ifconfig - a

  eth0 Link encap HWaddr 00:50:56:B8:40:B1

  INET addr:Address IP PUBLIC Bcast:xxx.x.x.xxx mask: 255.255.255.0

  ADR inet6: fe80::250:56ff:feb8:40 b 1 / 64 Scope: link

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  Dropped packets: 1004162 RX errors: 0:0 overruns: 0 frame: 0

  Dropped packets: 69260 TX errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:1000

  RX bytes: 100817580 (96.1 MiB) TX bytes: 15328431 (14.6 MiB)

  eth0:2 Link encap HWaddr 00:50:56:B8:40:B1

  INET addr:SCAN IP_2 Bcast:xxx.x.x.xxx mask: 255.255.255.0

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  eth0:3 Link encap HWaddr 00:50:56:B8:40:B1

  INET addr:SCAN IP_3 Bcast: xxx.x.x.xxx mask: 255.255.255.0

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  You can also check the output of command 'ifconfig - a' when rac services are not running. If you are planning for failover scenarios, it is reasonable.

• When I click on 'File' and then 'new' it keeps open a new file as a layer and not a background. The RGB mode is selected.

  When I click on 'File' and then 'new' it keeps open a new file as a layer and not a background. The RGB mode is selected.

  With the new files to open as a layer and not a background, I'm not able to create multiple layers and it won't let me convert the background layer.

  How what happened. I've used PS yesterday and had no problem. Today, my computer did updates mandatory day and now this.

  Yes. You use the option of Pixel of the Ellipse tool. He's so setting pixels as it is supposed to do without creating a layer.

  Choose the option to the form:

  

  Also the menu layer > new layer creates layers and paper rolled up at the bottom of your layers palette also creates a new layer. I hope these work.

• Cause problem to keep PG and RN files in $JAVA_TOP?

  For simplicity, it is easy to keep PG and RN files in $JAVA_TOP, since I can put everything on the server at the time of time by simply copying the contents of MYCLASSES to JAVA_TOP. Also, I did turn the import XML on the GSP and RNS from this location.
  
  It causes problems to keep these files in JAVA_TOP? It's the kind of hassle to separate them and sort them in different places.
  
  Thank you
  Kurz

  I think that you may have about Custom Development.

  It causes problems to keep these files in JAVA_TOP? It's the kind of hassle to separate them and sort them in different places.

  No it should not have any problem. Just after the standard of Oracle and move the PG.xml, RNs.xml in the folder appropriate to top/webui on $JAVA_TOP

  and

  AM, VO in the appropriate top/server folder on $JAVA_TOP.

  http://oracleanil.blogspot.com/2009/05/disable-button.html

  Thank you
  -Anil
  http://oracleanil.blogspot.com

• I have question for models

  Bit of a rookie. I do not know if I go about it the correct way.  Any advice is all just great.

  I created a html Web page.  I used a lot of div and css to manipulate the content, images, and videos and position them correctly in my Web page.

  I need now about 4 other pages to clone the original.  I want the images and video to be modified on an individual basis, but I need the posts of css, menus and such update (sorry I don't know the right word) like a domino effect.  If I put on the page of the model, they are all up to date.

  I saved the original .html as model page and selected from all regions should I make can be changed on individual basis.

  However, I have a base level div that has a background image associated with it.  I want it to be a change 'domino '.  I want that it appears in each version based on a model of the original and remain the same as the original.  However, when I apply the model to an empty HTML page, the image not placed in the new Web page.  Everything else is OK.  The div and CSS seem good but not images.

  I chose not as an editable region.

  What I forget?

  I hope that all the senses.

  
  Thanks for any help in advance.

  -Drew

  If I create a Web page locally on my machine, DW keeps local address until I publish.

  No - is not correct.  If you make a Web page locally, DW written the correct path to the file target at the moment you save the new file in the site - at this stage DW can know what this track must be.  All files in your site MUST have one of the three types of links they contain-

  1. the parent document (that is, the path starts with the current location of the file)

  2. relative root (that is, the path starts at the root of the site)

  3. absolute (i.e. the path is a full URI)

  If you see a file:/// path in any link, then you have a problem.

  To make a model, you can use any workflow you want, but it should be generally A) create a new page, B) to build the base layout on the page and C) save the page as a template.  Having done this, you can then lay in the editable regions and resave before you start generating pages of your child.

  Then I have to create a model of a Web page that is already published?

  If you follow my previous reviews, you will know that the answer here is NOT (there are no value to a model published in any case).

  Is there a setting inside DW to DW to change all directories to be parent instead of local once published?

  N ° although you could build a search and replace that would do this for you (only if you changed links of root, however).

  I have about 10 pages child html which are all based on the parent template.  I was hoping that all THE items on the parent page would affect the child pages, if I so wish. I was hoping that if I add or remove images, css, html, video, flash of the parent and all the child pages would be updated as well (as far as these articles are editable

  Here, you are completely wrong.  The concept that escapes you is the following:

  EVERYTHING on a template page is editable.  Only the changes in the regions NON MODIFIABLES models will be spread child pages.  If such was not the case, you might have never contained unique on a page of the child!  Make sure you understand this before your work is further.

  The question that I am running is that the parent page works fine.  However, when I publish the child pages remain local directories...

  It is a problem with your site definition.  DW is the thought that your children pages are NOT in the folder root of your site.

• TV 39L4353D - 5.1 to pllaying question stereo USB flash drive files

  Hello

  have recently purchased the above model, and will have questions game 5.1 Blueray audio files from my USB drive on the TV...

  Basically, I can change the audio channels via the remote control, but the only channel I can operate is a horrible English dub!

  The correct language is selectable, but does not play at all... any ideas?

  Thank you

  Hello

  In my opinion, you should check first if the same question would appear from different sources.
  I mean, you should check 5.1 movies playing appearance of DVD and BD discs that support 5.1

  In addition, you should check the manual for the video/audio codec and file format supported by using the USB interface.
  To my knowledge, not all formats are supported!

• Model road CSV file deletes '0' field numbers called prefix Party

  I want to download more than 350 models of road using bat tool in CUCM 9.1. All models must have their field called prefix part numbers (outgoing calls) containing 10 numbers with "0" at the beginning. The problem is that the CSV file removes the dominant form of '0' figures. I tried to make the type cell in Excel as 'Text' and it worked and the '0' is held normally, but when I save and close the file and then open it again, the cell is set by default to the type "Général" and "0" is gone again! Change the format of CSV file to any other and download to CUCM system generates an error indicating that the file format is not supported.

  A sample entry in the CSV file is attached. I want to preserve the whole number '0541234567' in the field 'PREFIX_DIGITS_CALLED_PARTY '.

  Can someone help me how to download this large number of models of road while preserving the number "0" at the beginning?

  Yes, it's how excel works, so open again the file, adjust it, save, and run via BAT. I did deployment with extensions starting with 0 and it works very well as long as you keep it open.

  Chris

• Sony NEX raster question noise model

  I me in treatment of some files today and noticed the bottom half tone / model of armour in an area of my image.  I treated the same file in Sony Image Data Converter and the question isn't here then this is definitely an issue unique to Adobe raw converter.  Seems if poster only this transitional tonal area very smooth, nowhere else in the file.  It was pretty noticeable at the sight of 50% to get my attention in the first place.  The example linked below is enlarged 200% with the cab on the left and Sony IDC on the right. Seems to be rare because it first I encountered this.  This explanation was given to me by a member not adobe in another forum:

  "There is a setting in camera DNG ACR/LR green channels profiles called"BayerGreenSplit", which tells the engine to tween to wait a small gap between the two and does not build"grid-patterns"like the ones you see here.  For some reason any, that I can't understand, they declined / to zero this parameter for several Sony cameras in the latest version 6.2/3.2. You can set the parameter between 0-5000. This is an arbitrary value, I don't know what it means in fact of a top scientific - except that no difference is '0' and '5000' a very big difference. »

  Is this the cause and this bug will appear in the next version of ACR and Lightroom? The file is not underexposed or extremely manipulated.

  Larger version here, is to cut and paste into the browser to see the whole picture as it appears at 200%: http://www.gibranstudio.com/adobenex.jpg

  Below the embedded version is what image culture looks like 100% on screen when clicked:

  

  Known problem with the NEX and ACR/Lightroom.

  Unfortunately, STC profiles have BayerGreenSplit in them, so you can't set this way.

  However, until Adobe fix it, there is a solution for the model of labyrinth, if you don't mind some extra steps to your workflow: http://sites.google.com/site/cornerfix/using-cornerfix/maze-patterns-1

  The PCF file '500' seems to work on the images of NEX, I tried.

  Sandy

• Yet another question of model

  Recently, my model started inserting his own repertoire of all the URLs in the site when I update the pages, so:
  
  href = "site/index.htm"
  
  became:
  
  href="site/templates/index.htm".
  
  The links in the site are enterred like this:
  
  href = "Stories.htm"
  
  For a page that is located in the directory of the site. The model transformed into:
  
  href = ' templates/Stories.htm'
  
  This just started happening. Before that, there was no problem. No idea why this happens and what to do about it?
  Of course, none of the work of the image or the links of the CBC.
  
  Help
  
  -Kenoli

  Thanks for your quick response. I'm helping a friend here and what threw me was that it works and then suddenly wasn't. Of course, I don't know what she could do to cause that, even if she is not conscious of having anything other than make a small change and update related files to the model. I discovered that inserting a "... / ' from each link solved the problem. Here are answers to your questions:

  > Are these pages * in * the Templates folder?

  NO.

  > Are you put these links of coding, or by searching for the target files?

  I don't know, but try the method browse inserts the "... / 'syntax in front of the link." (should have tried it immediately)

  > Can we see your template page?

  I think this is resolved, so...

  > DW did only what you tell it to do...

  Gotcha, although, as in life, sometimes we don't know exactly what we said.

  Thank you

  -Kenoli