Question of multicast and Microsoft NLB

Similar Questions

• Microsoft NLB question

  Hello

  Had a first go at NLB configuration. I have it configured in the same manner as my colleague did

  physical boxes.

  I have it configured as multicast and everything looks ok in the NETWORK Load Balancing Manager. Unlike with physical servers.

  I can only connect to the cluster that is part of the same subnet. I can't ping from another subnet.

  What gives? According to VMware should not require changes to the host.

  I tried placing virtual machines on a host and different hosts. The results remain the same.

  works only part of the same subnet.

  see you soon

  The key here is that the multicast MAC address is not captured by the routers in question.  That's why you can only ping locally in the same VLAN.  To resolve this problem, you need to create a static ARP entry on your 8.

  Page 2 of NETWORK load balancing guide:

  Some routers do not support the resolution of IP addresses unicast to multicast MAC addresses and they don't answer ARP. Thus, an administrator must add a static ARP entry in the router, mapping of the IP address of the cluster in its MAC address.

  -KjB

• Microsoft NLB and after vMotion network connections

  We have several hosts ESXi (4.0) one of them containing a virtual member of a NETWORK 8 Server Load Balancing cluster.

  When I migrate all servers to host containing the Member of NLB cluster virtual that I can no longer connect to one of the other 7 members. But the strange thing is I can reach any other machine on this host as well as not been transferred there recently (I don't know what triggers it)

  The migrated machine can reach any other machine not in the NLB cluster.

  The cluster is located in multicast. and is in the same subnet as the other servers.

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1006525

• How many questions is to review Microsoft 070-659?

  How many questions is to review Microsoft 070-659?

  Hello

  You can ask your question about training and Certification on the following forums.

  Training and Certification Forum:
  http://social.technet.Microsoft.com/forums/en-us/CertGeneral/threads

  Concerning

• Replacement for "Microsoft.vsa.dll" and "Microsoft.VisualBasic.vsa.dll" in Visual studio 2005

  Hi all

  I am in the process of migrating a Visual studio 2003 project in Visual studio 2005.While recompilation of code with VS2005, I'm getting below error-

  ' 1. ' Microsoft.Vsa.IVsaEngine ' is obsolete: ' use of this type is not recommended because it is is deprecated in Visual Studio 2005; There is no replacement for this feature.

  ' 2 ' Microsoft.VisualBasic.Vsa.VsaEngine ' is obsolete: ' use of this type is not recommended because it is is deprecated in Visual Studio 2005; There is no replacement for this feature.

  Could someone please suggest me any solution for this problem?

  Any replacement is available for the files 'Microsoft.vsa.dll' and 'Microsoft.VisualBasic.vsa.dll '?

  Thanks in advance

  Arpita

  Hi Arpita,

  If I understand correctly you have a problem with Microsoft Visual Studio 2003, I suggest you send the same question in the Microsoft MSDN forums for assistance.

  http://social.msdn.Microsoft.com/forums/en-us/category/VisualStudio

  Hope the information is useful.

• Update for Windows XP (KB2718704) and Microsoft SQL Server 2005 Express Edition Service Pack 4 (KB2463332) will be without installation

  ORIGINAL TITLE: updates XP

  Update for Windows XP (KB2718704) and Microsoft SQL Server 2005 Express Edition Service Pack 4 (KB2463332) will BE WITHOUT INSTALLATION

  Please answer each of the following [admittedly tedious] diagnostic questions in a numbered list type in your very next answer (no need to quote this post):

  1. What is the full name of your application or the installed antivirus security suite and when (date about) is your subscription current expires?  What (other than Defender) anti-spyware applications are installed?  What third-party firewall (if applicable)?

  2 a Norton or McAfee application ALREADY installed on the computer?

  3. do you have a free trial Norton or a test of free McAfee [CHOOSE ONE ANSWER] come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

  4. open Add/Remove Programs and make sure that Show updates at the top is checked (and leave it checked); then select the name in the box sort by on the right. Now do scroll down & tell me if ALL the other updates following up-to-date are listed?

  (a) KB2676562,262, KB2686509 & KB2695962KB2659;

  (b) KB2675157, KB2653956 & KB2621440;

  (c) KB2661637, KB2598479, KB2631813 & KB2585542;

  (d) KB2633171, KB2393802 and especially KB971029

  Most will appear as Windows XP security update , followed by the number in brackets.

  If IE8 is installed, two 2 will appear as a security for Windows Internet Explorer 8 update , followed by the number in brackets.

  5. is Firefox, Chrome or any other alternative browser installed?

  6. what version of Java is installed?  TEST HERE in USING IE (only!)-online http://java.com/en/download/installed.jsp

  7. are you familiar with "Registry cleaners" (e.g., Registry Mechanic;) System Mechanic; RegCure; RegClean Pro. Advanced SystemCare. Registry Booster; McAfee QuickClean. AVG PC TuneUp. Norton Registry Cleaner; PCTools optimizer; SpeedUpMyPC; Advanced System Optimizer. TuneUp Utilities; WinMaximizer; WinSweeper; CCleaner)?

  8 have you ever had the opportunity to do a repair install or clean install of Windows XP for some reason any?

  Note: KB2463332 is a update optional, not security. Feel free to hide it.

• What to do to change my windows and microsoft install t

  I have a new computer as a gift for my birthday. I need to know how I can put all my windows and softwear microsoft I have on my old computer to my new computer. I don't have the disc more or the key acrivation all of this information was lost omost a year ago now wen I moved. I don't want to have to pay for all my windows and microsoft softwear that i own and have had it for a long time a gen and I have no belivie I should have. Really, I don't want to change by using windows and microsoft but if there any way for me to be accepted to have all my stuff that I had during the year and paid because then I belivie I have to find a different softwear to use I won't have problems with changing to a diffrenet computer or having to pay a whole generation for the software I have all ready own on a computer. I really hope there is a solution to my QUESTION. I really enjoy using windows and microsoft softwear, that I use a lot of your softwear for work and at home, with all my brothers lil for school projects and pritty much of what I need to use it. Software I have on my computer is Windows XP and I belivie his 2007 to but I have a lot of windows for windows meida, Windows movie softwear, search Windows, the window message, all the product I own is all microsoft 2007 and I am owner pritty much all the, I list some of them here to help you see a lil of what I have and I have more to microsoft office , word of microsoft, PowerPoint, excel, accsesor, info path, outlook so I listed some of the softwear I your compony, so I really hope that there is a way to keep all cela and transfer it to a different computer, so that I won't have to pay back or changing software. Thank you for your time hope you can help me.

  Hi Falecya Sarmiento,

  There is nothing we can do without the disks of software and purchase details.

  For all questions related to the Microsoft office products, I suggest that you post your question in the forums of Microsoft Office.

  http://answers.Microsoft.com/en-us/Office

  How and when to contact Microsoft and support Customer Service

  http://support.Microsoft.com/kb/295539

• Impossible to install the software to receive error message like "16-bit MS-DOS subsystem config.nt msiexec.exe file system not suitable for running MS-DOS and Microsoft Applications."

  Hello

  Original title: problem installing the software
   
  When my wife tries to install software (for example the updates of Windows or Itunes) on his Dell laptop (Windows Vista Home Premium), she gets this error developed box.
  "the 16-bit MS-DOS subsystem
  The msiexec.exe config.nt file this system is not suitable for running MS-DOS and Microsoft Applications. »
  Grateful for any ideas on how to fix this problem!

  Hello

  1. what 16-bit or software program you try to run? Should I use the CD Rom drive?

  2 - is the question also appear during the installation of Windows updates?

  3. have you made changes on the computer before this problem?

  Follow the methods and check them out below:

  Method 1: Perform a clean boot and check.

   

  To help resolve the error message, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  
  Please note:  After troubleshooting, be sure to start your computer in normal mode by following step 7.

  Method 2:

  Run an analysis of auditor of system files on your computer and check for the issue.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3: Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Hope the above information is helpful.

• After uninstalling printer Windows Installer and Microsoft Office error "this update package not could be opened"

  Original title: Windows Installer and Microsoft Office problems after you have uninstalled the printer

  I tried to install more than one printer, a HP Photosmart C4280 by downloading the drivers and updates on the HP site. I uninstalled the printer after it failed to scan a document and I had no more use for it. Then the trouble started. When I tried to open some programs (iTunes, Skype, etc.) for the first time after the uninstall of the printer, a window "Windows Installer" popped up. After you have configured Windows Installer, the program would open normally. However, when I try to open any Microsoft Office programs (Word, Excel, etc.), Windows Installer appears, but it turns into a window that reads:
  "This patch package could not be opened. Verify that the patch package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer update package. »

  Microsoft Office programs are open at all, and I desperately need my programs of Microsoft Office to work even faster. I would appreciate it if Windows Installer will stop trying to configure when I open a program also. Can someone help me please?

  Hi Jennifer7,

  It is sufficient to indicate the complete error message you receive.

  Method 1: To solve the problem of Windows Installer, follow the steps

  http://support.Microsoft.com/kb/2438651#reso1

  Method 2: Follow the steps mentioned in the article below which addresses Office question

  You receive an error message when you try to install or run an Office program: "this patch package could not be opened" or "" the installation source for the product is not available".

  http://support.Microsoft.com/kb/932857

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

  If the question of the Office has not changed, you can post your request in the Office forums for more specialized help.

  Office forums

  http://answers.Microsoft.com/en-us/Office/Forum/office_install?page=1

• Windows live one care and microsoft security essentials

  I use a windows live care and now it time to renew a subscription so I want to know what is the different between Windows Live one care and microsoft security essentials? should I stay with windows live care?

  Windows Live One care is discontinued.

  http://OneCare.live.com/standard/EN-AU/default.htm

  Read the above info.

  WLOC uninstall it before installing MSE.

  Two AVs installed may cause blockages of the system, etc..

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://www.Microsoft.com/security_essentials/

  Microsoft Security Essentials offers protection in real time to your PC at home that protects against software viruses, spyware and other malicious software.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Microsoft Security Essentials questions should be directed to the MSE Forums:

  http://social.answers.Microsoft.com/forums/en-us/msestart/threads

  Installing and upgrading Microsoft Security Essentials program.

  http://social.answers.Microsoft.com/forums/en-us/msescan/threads

  Analysis, detection and removal of threats

  http://social.answers.Microsoft.com/forums/en-us/mseupdate/threads

  Update the definitions of spyware and viruses

  See you soon.

  Mick Murphy - Microsoft partner

• using Vista and Microsoft Works 9. Trying to create a word processing document.

  Using Vista and Microsoft works 9. Trying to create a new document in word processing. I want to copy and paste the text of an email or a newspaper article. I did it in the past with XP and a previous version of Works. This time, the system hangs.

  I can copy from document to document.

  I tried Notepad or something similar, could not find it and try it, even if I don't like the extra step.  Of course I can't find anything with Vista anyway.  Thank you!!!

  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.works.win&cat=en_us_9804e2ac-c762-44C9-9c6f-90e45f32d772&lang=en&CR=us

  Discussions in microsoft.public.works.win

  They will help you with your question of work in the work above Newsgroup.

  At soon Mick Murphy - Microsoft partner

• When I connect to the internet, servads pop up. I ran malwarebytes anti malwalre and microsoft security analysis. Not found the problem of servads in their analyses.

  When I connect to the internet, servads pop up.  I ran malwarebytes anti malwalre and microsoft security analysis.  Not found the problem of servads in their analyses.  How can I get rid of the servads.

  Hello

  1. what web browser do you use?

  2 have had any changes made to the computer before the show?

  If you use Internet Explorer, please follow the methods.

  Method 1:

  If you see pop-ups suspicious, bars unwanted tools, redirects, strange results or other unexpected behavior on your computer, you may have been deceived by installing malicious software (also known as 'malware') on your computer. This behavior is known as the browser hijacking.

  To correct your hijacked browser I suggest to follow the steps outlined in the article below and check if it helps to solve the problem:

  http://www.Microsoft.com/security/spyware/browserhijacking.aspx

  Method 2:

  Step 1:

  Start the computer in safe mode with network and perform antivirus analysis.

  See the link.

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Step 2:

  Perform an online virus scan.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  Method 3:

  Follow the steps in the link.

  http://Windows.Microsoft.com/en-NZ/Windows7/Internet-Explorer-pop-up-Blocker-frequently-asked-questions

  Method 4:

  optimize Internet Explorer and check.

  NOTE: The Reset Internet Explorer Settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  http://support.Microsoft.com/kb/936213/ro

• Is Windows 8 Pro and Microsoft Office 2010 license Transferrable to new PC (during the withdrawal of the old PC)

  Hello

  I had bought Windows 8 Pro as part of the upgrade offer in 2012.

  My current desktop PC gives signs of imminent failure. So I intend to mount my own PC and all ignoring the old one.

  My question is if I can transfer the current licence to the new office.

  What is the procedure for the transfer of the Windows 8 Pro and Microsoft Office license to new PC?

  Thank you and best regards,

  UNNI

  Yes, you can transfer the two as long as they are copies of the retail sale and do not come pre-installed on the machine.

  To waive the license of the machine, you can just format the machine or uninstall the license of Windows 8.

  To proceed to reinstall Windows 8 on the new computer and restart phone.

  Please note:

  To install a Windows 8 upgrade version, you must already have Windows 7, Windows Vista, or Windows XP installed on your PC.

  If you have formatted the drive until the upgrade of Windows 8 version has been installed, you will not be able to use your upgrade product key to activate Windows 8. To activate Windows 8, you will need to install your previous version of Windows, and then reinstall Windows 8. Help with the activation process, contact technical support.

  You can reinstall of Office 2010 and also reactivate by phone:

  Microsoft Office Activation number:
  http://support.Microsoft.com/kb/950929

• Question on vCOPS and Exchange

  Hi guys.

  I just read that vCops can follow MS Exchange DAG, with visibility of the app too, and I want to migrate from 5.6 to 5.8.

  VMware vCenter Operations Management Suite 5.8 announcement | VMware - VMware items Cloud management

  The version of vCenter 5.8 operations includes increased support for Microsoft SQL Server and Microsoft Exchange

  Question

  If I want the vCops can see Exchange, it is necessary to have installed vfabric? I don't like vFabric :|

  Thank you.

  The ability you are referring is the one offered by integration of Hyperic with vC Ops. Hyperic collects the necessary information of Exchange and SQL Server, which is then collected by vC Ops. vC Ops dashboards, which is presented in this article, you made reference, by virtue of having the Management Pack Hyperic installed and configured to collect data of Hyperic.

  If you want your data in vC Ops of Exchange or SQL Server application, you must deploy vFabric Hyperic. You can also get these data in other products such as SCOM, however integration of 3rd party is not under discussion here. The emphasis on the article you mentioned was integrate Hyperic with vC Ops, since you get Hyperic and rights vC to the Ops product with the property of the CV Ops.

• Hi me Mamadou Moustapha I bought apple that i phone 6s a few days find out who the best phone of the world, because the day I bought it, I had questions on screen and when I went to the service center, they said they're going to update they have updated o

  Hi me yedess apple that i 6 s phone few days back knowing have the best phone in the world since the day I bought that I have questions on screen and when I went to the service centre they said they're going to update, I bought they updated after that I have the same problem now they say they're going to fix very terrible situation for apple this new product which has manufacturing defect they will repair, I asked to change device they deny because they want to fix m single i face the problem of the first day of the customer are powerless and that they only make just crazy.

  It's what warranties are for. If you bought the phone from Apple or an Apple authorized reseller, iPhone, you have 14 days to return it for a refund. After that the Bank should replace the phone. If you did not buy from Apple or a shop authorized, you must respect the terms of this store. However, Apple will always replace the phone, if you contact them directly.