Question of packaging Flash Mobile IOS

Similar Questions

• development of mobile iOS without possible Apple/Mac?

  Hello

  Is it possible to develop/deploy an application mobile iOS (for iPad) on a PC?

  I have already developed an Android using Flash Builder application and now I would like to build the app for iOS also. I found conflicting information on the web. On the site of the iOS developer program, I found the following: "You need a Mac with Intel processor running Mac OS X Snow Leopard or later to develop iOS for the App Store applications."

  Is this correct? Or can I use my Flash Builder (4.6) running under Windows to create a package for iOS? Finally, download it in the App Store?

  Any comments would be appreciated.

  Kind regards

  Wim.

  Wim,

  For complete information on iOS using Flash Builder development process, please visit http://help.adobe.com/en_US/flex/mobileapps/WS064a3073e805330f6c6abf312e7545f65e-8000.html. This topic contains detailed information about how to obtain a certificate from developer, to generate a configuration profile, create and deploy the application.

  Hope this helps,

  Mallika Yelandur

  Adobe Community Help & learning

• Can I gift my app iTunes purchase mobile iOS?

  Unlike on my iMac desktop, I can't seem to find a way on my iPhone or my iPad running the iTunes app mobile iOS to gift (do not buy) a song from iTunes. Am I' something missing?

  Send gifts iTunes - Apple Support

  As explained in the link above, you don't present unique song of iOS devices. You can offer only entire Albums.

• Cannot sync picture added to the collection on Lightroom Mobile iOS 2.4 (with the last RAW support)

  Hello

  I have the following timing problem:

  1. I created the new collection of event using Lightroom Office and added some photos to my DSL
  2. And then synchronize this collection with my last Lightroom 2.4 Mobile iOS (last with RAW support)
  3. Using LR Mobile has added some photos to the additional event captured by my iPhone to the same previously synchronized collection
  4. It seemed that everything worked ok... the new picture has been added to the collection on LR Mobile, it is also visible in LR Web... but
  5. ... when I run Desktop LR he tries to synchronize this 1 photo indefinitely... it never stops and my LR Office is the synchronization...... synchronization synchronization... showing 'Sync 1 photo.

  When I create new collection of my Mobile LR (and the first step in office), then add picture... then everything works well... but it isn't I wish I had. The ideal situation is when I normally treat most of the photos of the event, coming for example from my DSLR and then could be added to the collection even some additional shots of the iPhone directly in LR Mobile so it could appear in LR Desktop collection with photos DSLR.

  Any help will be much appreciated.

  Kind regards

  Alex

  Have you double checked the status of clouds within the application Mobile of Lr. are still pending downloads listed. If so, the County gets down when you have Lr Mobile running for a few minutes in the foreground? -Guido

• What is the name of the Mobile IOS app?

  Good afternoon Oracle initiated:

  I like the new look JIVE & feel @ My Oracle Community.  Great job integrating social media & giving developers a chance to interact in a creative way.  In the email that details the new features, a mobile IOS app is mentioned.  What's his name?  This mobile application will be an extension of the Oracle Community web?

  Maybe I can you guys make networking with me now ;-)  Accept applications for my network?  Send me yours?

  Truly,.

  TreeStrepek

  Do you mean https://itunes.apple.com/us/app/oracle-now/id392079209?mt=8

  Timo

• Difference between package flash.events and mx.events?

  Hello

  Can someone please let me know why there are two packages for flex events is flash.events and mx.events package?

  Please tell me what is the difference between a package flash.events and mx.events?

  Thanks in advance

  More generally, as far as I know, flash.events contains events associated with Flash Player (Flash and Flex joint) while mx.events contains the events in connection with the Flex framework.

• Flash loading packages in Mobile?

  Dear all,

  I'm created site LINK I received the email from our client as our web page flash does not load in the mobile or iphone. How can I rectify this?

  (1) I don't have an Iphone, how can I check my site for friendly game for Iphone all free online service

  Concerning

  Maury

  You can load SWF files on iOS, but they cannot contain any code.

• Standard package freezes on iOS

  Hello

  I meet a very odd behavior of my application (using Starling): after installing the final version of Flash Builder 4.7 this week

  commercial versions (using the Standard packing method) freeze after startup on my iPhone 4 (iOS 5.01 and 6.01).

  With Flash Builder 4.7 beta 2 that everything worked well.

  The funny thing is that the app works fine on Android devices and even when the debug output or build using the quick packaging

  method on iOS.

  To me, it seems that the ENTER_FRAME event does more properly in this situation. I don't think it's a problem of Starling

  because I didn't update anything.

  I use the latest AIR SDK 3.5.

  No matter who also have this problem or knows what I need to edit in Flash Builder or a release build also source code

  works well on iOS?

  Thanks for your help.

  Concerning

  Valley of

  So, we both have just posted this question in the forum of Starling!

  I'm happy that I'm not the only one who has these problems.

  Thanks a lot for your efforts, sinious, I hope that the creators of Starling

  get an idea of what's going on here and can fix it quickly.

• Flex [mobile] iOS app refuses to connect to a self-signed SSL server: error 2032. Ring the bells?

  Hello everyone, thank you for reading this and I hope you could help me with this problem.

  I'll cut to the Chase. I am currently working on a mobile app in Flex for Android and iOS and the app has to get a few HTTP requests and retrieve information from a server, which is currently developing a teammate.

  Everything had to be working very well until we decided a few days before when we have integrated a SSL self-signed certificate in order to make connections more secure, etc.

  On the side of the app, this change, lying just to replace the http with https url and it seems to work perfectly, or that's what we thought.

  Tests on the Simulator or on an Android device worked well, he just showed the warning provided access to a server that had a rogue certificate that could be ignored without any problem. But when we tried to test a Release on a camera of the iPhone version, it would not just work more. A connection every time trying to be established with the server, error 2032 flash is triggered and it fails miserably does not display not warning about certificates not approved at all. For me, it's really confusing that it works on Android devices, but not on the iPhone device.

  I searched on the Web for people having the same problem but I couldn't find an answer to this specific issue of Flex-iOS-Self-signature-SSL. I found this post unanswered questions: http://forums.adobe.com/message/3359072#3359072 but nothing much.

  I tried to create a crossdomain.xml file on the server with guaranteed set to false, and some other stuff to avoid crossdomain policies, but it changed nothing and the problem persists.

  I'm really out of clues, sort of desperate and have no idea how fix it. If anyone knows something related to this problem, please, help me, I'll be less grateful.

  Thank you!

  We decided to buy a verified SSL certificate, and it worked. We can say that the problem is solved, but it wasn't actually because the connection must be established and that the invited user to accept or decline the self-signed certificate, not only do not make the connection.

• Portege R830 - Win 8.1 Value Added Package (Flash cards)

  Hello.

  First of all I would like to say that I used my Toshiba Portege R830 with all the operating systems since Windows 7 and I have never installed fresh OS.
  That said, I could not use Intel WiDi on Win10 and had to return to Win8 (DVD which I happily bought as well as the upgrade).

  I installed all the software Toshiba using Upgrade Wizard and for the first time since the 2011', there was no Flash cards available (drop-down menu shown with use of the Fn keys). I used to like 2.5 years on Win 8/8.1 and now his party and is not available to the installation...

  WTF? After a week, I discovered that cards Flash is not present in VAP 1.6 (only in 1.5.X.X or earlier).
  Unfortunately I can't install only stand-alone Flash cards (or can I?).

  And here my question: if I install VAP 1.5 (with Flash cards), can I (ANYHOW) strengthen certain elements (such as system driver) without uninstalling the previous version of VAP?

  From my experience when I run VAP 1.6 installer first thing it does is an uninstall complete previous versions.

  Please help me! I can't imagine who thought that removing the 1.6 flash cards would be a good idea...

  Driver Toshiba UE page provides the Key Utility for Windows 8 Upgrade feature Toshiba v1.00.6626.03.

  So, if you have installed Value Added Package 1.6.0130. You must also install the key function Toshiba utility

  

• Error when packaging app for iOS - Undefined symbols for armv7 architecture

  First time trying to package an AS3 Air application for development.

  App works fine on Android and is available on the Google/Amazon etc. store. The version I try to package a all references to DONKEY I use removed for simplicity.

  I use Flash Builder 4.7, AIR v4.0 and developed on a PC in Windows 8.

  When you use fast packaging no error is thrown, but the app shows just a black screen on my test Ipad (v3).

  Using standard packaging, I get the following error at 57%:

  Error occurred during the application of packaging:

  For architecture armv7 httpd Undefined symbols:

  "__Z15abcOP_nullcheckIPN7avmplus6AbcEnvEEvPNS0_9MethodEnvET_", referenced from:

  _abcMethod_builtin_2_2_function public::global21.describeType in AOTBuildOutput - 3.o

  _abcMethod_builtin_3_3_function public::global21.describeTraits in AOTBuildOutput - 3.o

  _abcMethod_builtin_6_6_function public::global21.describeParams in AOTBuildOutput - 3.o

  _abcMethod_builtin_5_5_function public::global21.describeMetadata in AOTBuildOutput - 3.o

  _abcMethod_builtin_4_4_function public::global21.finish in AOTBuildOutput - 3.o

  _abcMethod_builtin_26_26_function public::Object$ ._dontEnumPrototype in AOTBuildOutput - 3.o

  _abcMethod_builtin_30_30_null IŠ¬:_init. in AOTBuildOutput - 3.o

  ...

  LD: symbol not found armv7 architecture

  Compilation failed during execution: ld64

  Any help you can offer would be very welcome.

  Please try with the latest version of the AIR 15 Download Adobe AIR beta 15 - Adobe Labs , as it contains many corrections of bugs for the new quick links Manager. Let us know if you still faces questions.

  -Nimisha

• How to make Player Mobile (IOS/Android) to fill the shape cells based on the entry in the other cell?

  Hi, is there a way to make Acrobat Reader Mobile (Android/IOS) to fill the shape cells based on entry into another cell?

  I did a time sheet were based on a code entry activity in a description drop-down list box that matches the activity code is displayed automatically in another cell. (see below)

  This works perfectly as long as I'm on a PC, however, does not work on any phone. (I guess that this feature is not yet supported on Acrobat Mobile)

  My question is if anyone can suggest an alternative method for characteristic mentioned that also works on phones?

  Any suggestion would be appreciated

  In the Format field:

  If (Event.willCommit)

  {

  Console.println (Event.value);

  Switch (Event.value)

  {

  case ' 1 01 ":

  this.getField("REMARK1").value = "unloading".

  break;

  case "2 01":

  this.getField("REMARK1").value = "preparing."

  break;

  .

  .

  .

  case "19 44":

  this.getField("REMARK1").value = 'Support-3rd part insp/contract.';

  break;   case "": ""

  this.getField("REMARK1").value = "";

  break;

  }

  }

  Sincerely: Robert

  Try to get rid of this console.println statement. If this does not help, it should work if you convert that from a script from the drop-down list format in a calculation of the field REMARK1 script.

• 4.6 mobile iOS SoftKeyboard hide

  Hey everybody,

  So, I'm new to not only this community but also Flex programming. I'm working on a project of the app to my work using FB. My question is, on the same discount ahead Softkeyboard, that the event has been canceled. We were recently using FB 4.5 and the following Textinput would call a custom keyboard we did and prevent the softkeyboard to come:

  < s:TextInput width = '175' id = 'txtICDOB' limit = "" 0-9 / "maxChars ="10"softKeyboardActivating =" preventActivate (event) "/ >"

  ////

  ////

  private void preventActivate(event:SoftKeyboardEvent):void

  {

  Event.preventDefault ();

  numericPad.buttonsHolder.visible = true;

  numericPad.buttonsHolder.addEventListener (FlexEvent.HIDE, resizeScreen);

  scrollbar.percentHeight = 75;

  }

  ///////

  //////

  We have recently upgraded to 4.6 and the Event.preventDefault (); is no longer supported. Now the custom numericPad and softkeyboad pop up and I can't figure out why even.preventDefault (); no long works. Any help would be appreciated.

  "< s:TextInput width = '175' id = 'txtICDOB' returnKeyLabel = 'next' enter =" changeField (txtICAddress) "limit =" 0-9 / "maxChars ="10"softKeyboardActivating ="preventActivate (event)"/ >

  ////

  ////

  private void preventActivate(event:SoftKeyboardEvent):void

  {

  Event.preventDefault ();

  numericPad.buttonsHolder.visible = true;

  numericPad.buttonsHolder.addEventListener (FlexEvent.HIDE, resizeScreen);

  scrollbar.percentHeight = 75;

  }

  ///////

  //////

  For textinput in Flash Builder 4.6, you should change skinclass as below use Event.preventDefault (); code. I had this problem and solved in this way.

  skinClass = "spark.skins.mobile.TextInputSkin"

  Hope this will help you.

• QUESTION ABOUT ADOBE FLASH

  On the top of my screen, I get a notice every time that I'm looking for a Web site. According to him, «ALLOW to RUN ADOBE FLASH...» CONTINUE TO BLOCK... ALLOW. "I don't know what that means. How can I remove this notice for good?

  Why would you remove your questions? They are in the forums to help other users with similar issues that come to the research.

• question of package ID for an existing application

  Hello
  I can't update my version of the application because of the question 'ID of Package must match ID of Package in the bundle of original file.

  I recently updated my laptop and after the upgrade, I published an update and it has been accepted by the world of BB. Its a few months since my last update. I have a new update to my candidacy and now I'm stuck in the question above.

  My BBIDToken has expired, so I'm a new to the dev site. saved in a location, and then run the script of "blackberry-signatory" to connect my bbid with KSB files. running the script says ' Info: CSK connected successfully to BBID' but after cleaning and re - compile, file bar is not always be accepted by the world of BB.

  I checked my name-package and it corresponds, however, package-id is not, that is the question. I have files from previous bar, can be used in some way to extract the information needed to get the update?

  Also, I used 'restore' option in the Configuration of signature BlackBerry with a zip file consisting of barsigner.csk, barsigner.db and author.p12.

  BTW, I followed the steps on http://supportforums.blackberry.com/t5/Native-Development/Help-Package-ID-must-match-Package-ID-in-o... but no luck.

  Please suggest.

  Step 3 must be done once, before starting to use a token created in your BlackBerry ID account  Do you have applications using key method (CSJ) that is earlier than chips BlackBerry code signing ID?  Initially link to your BlackBerry ID Token when you installed everything first he?

  By default, the tools uses a BlackBerry ID token if it is present, ignoring the code signing key.  If you have installed the token, signed, and then linked to your previous code signing keys, it would change the package author Id of the BlackBerry ID account to match the original code signing key account.  This could have happened?

  Send me a private message with your package-author-Id of your original file BAR and I can watch the account used to sign.