Question of the application of other machines access

Similar Questions

• Why some items in 'Open an existing project' have just the name of the project and others have access to the entire file path?

  I have SP1 2012 LabVIEW and on the main screne of LabVIEW selecrt "show projects".

  Why some elements of 'Existing Open' (project) have just the name of the project and others have access to the entire file path?

  Examples of two lines in the list of projects.

  Ping.lvproj (with a path: C:\Users\mlevine\Documents\MPCE EQT\EQT Software\Ping.lvproj)

  C:\Users\mlevine\Documents\Common package Mission trainer (CMPT) \SUW Surface Warfare\Weapon permission Panel (WAP) \WAP LabVIEW Software\WAP fire authorization server 28 April 2015

  No chance, it's because I made a copy of this software and stored on a network drive power off and it went out of this network drive?

  So if LabVIEW sees two or more versions of the same software, he decides to use the name to differentiate between full path?

  I'd still rather it shows just the name of the project and if you hover over the name it shows the full path.

  Thank you

  Mark

  If you have opened a project of the same name from a different location, it is when it shows the full path both - in this case showing just the name of the project would not help because it would be the same thing!

• XP loses the visibility of other machines on my network to "My Network Places" after plugging in USB audio dongle.

  I have a XP Home Edition laptop with defective onboard sound, so I bought a sound card USB (dongle). Before using the dongle, I could still access the shared files on my other machines through "My Network Places" (NPM). However, when I plug the audio dongle (which uses the driver USB audio generic Microsoft) other machines on my network are accessible to only a few minutes, after which they are no longer visible through MNP. I can still map remote shared folders to a drive letter in Windows Explorer, and Internet access is not affected. Once the remote computers have disappeared from the NPM, they don't come back again after a reboot, or even after you use the System Restore tool to return to a State before that the dongle is connected. The only way I can get MNP working again is to restore the c: full since a backup of the image. (Fortunately, my personal files are in a separate drive of the Windows operating system partition.)

  Apart from the use of the dongle, are there other ways to get the NPM in order to see the other machines on my network in a consistent way?

  I don't have a solution to the problem of MNP, but I have a possible workaround.  To access another computer when MNP is not running, click Start > run , type the name of the computer in the box as shown below and click OK :

  \\computer

  Boulder computer Maven
  Most Microsoft Valuable Professional

• Question on the application of web camera

  Recently, I started my laptop Toshiba, as it does so, I became aware that the application of Web camera that is part of the installed software/hardware tools, has appeared on the desktop screen, as usual, but on this occasion, he disappeared again, I tried to locate and determine what had happened, but without success, to solve the problem or retrieve the application of the Web camera as a tool of the laptop It is rather limited and miserable as I video link with my daughter, London and is essential, apart from talk, see visually and vice versa.

  No advice and no information would be more appreiciative

  In general, default webcam app starts with Windows as small window pop up on the left side of the desktop.

  Unfortunately I didn t understand what happens with this application on your laptop but you can start it manually.
  Otherwise, if you use the webcam with other applications like Skype, webcam application must not start with Windows.

  The bottom line is this webcam is properly installed and listed in Device Manager.

  If there is a problem with the webcam in general please describe in detail what is wrong with that and we can try to help you.

• How to import the structure of the catalog in other machines.

  Hello

  I have two requests. :-

  (1) I have a clothing catalog on my machine that I created in VAC. How to import this catalog structure in the other machines as well.

  (2) how to specify CatalogId in my project if I have multiple catalogs in my project.

  A single catalog, I used to mention catalog Id in catalogTools.properties in /atg/commerce/catalog/catalogtools.properties as:--

  defaultCatalogId = catalog30001

  How to make for several catalogues.

  Please advice.

  Thank you

  1. Go to the path of Jacks dyn/admin

  say in this case u created the ACC catalog data, go to/atg/commerce/catalog/productCatalog jacks

  Run provide name of descriptors section. under the section "operation tags XML on the repository.

  It will export all the data for some component and it is dependancies.if u wan to disable dependencies specify skiP-references = 'true '.

  To import and export data, you can use/ATG_HOME/bin/startSQLRepository command only in dev envirnoment.

  startSQLRepository-m ModuleName-import/export export_file_name-repository repository_component_full_path

  for example: -.

  startSQLRepository m Votre_module-export export.xml - repository/atg/commerce/catalog/ProductCatalog

  startSQLRepository m Votre_module-import export.xml - repository/atg/commerce/catalog/ProductCatalog

  Please make sure that you module is able to connect to the database, otherwise jtdatasource exception will come, not saying do not able to connect Datasouce atgmysqldb (default db configured in the jtdatasoruce property)

  Also if you want to export full db, use all the argument.

  startSQLRepository m Votre_module-export all the export.xml

  2. you have several options for setting catalogid in profile.

  • Use multisite and assign the default catalog to individual sites,
  • Set catalog to the user regiestered profile.
  • Usage scenario to assign the catalog profile based on rules.

• Question on the application of the worksheet

  A simplified version of what I want to do: I in cell A1, enter a number such as 3. In cell A2, I want to be able to write a text such as "the value is 3. In Excel, I could do with = CONCATENATE ("the value is", A1). Will there be a similar option in the application of spreadsheet of HP? In the example, you see below, I want that every line of p (x) to show the real value instead of the letter x x.

  

  If cell A1 contains 153 cell A2 = cat ("the price is $", a1), the rocker CASE is enabled for cell A2, then A2 appears as "the price is $153,0.  You can use the formatting options of the command (a STRING) to further customize how incorporated the numbers appear.  For example, = cat ("Price is $", STRING (a1, 2, 2)) is displayed as "the price is $153,00" because the first 2 selects fixed display mode, and the second 2 specifies 2 decimal places.  See help screen integrated in the CHAIN for details.

  

  Please note that CASES toggle (second button from menu when editing) must be turned on and 'chat' must be spelled in lowercase, and "STRING" must be uppercase.  The chat function () can contain any number of arguments of any type in any order, so it is very powerful for the creation of any expression you want.

  DISCLAIMER: I do not work for HP; I'm just another user first HP happy.

• question of the application background ~ ~

  my application is a background thread and the auto-run app, now I have the qustions on click the application icon

  my application have no any screen, but it has an icon of the application,

  now, I want to show the default browser, as I click on the application icon. How to do?

  Use the alternate entry point. to find out how set up another point of entry, check your blackberry dev guid.

• Question of the application process

  +(First OFF, we're using ApEx 4.0 through IE8) +.
  I have a report that serves as a "shopping bag" of sorts, with a "Delete" button to cancel the Articles of him. But the button 'Delete' is not to go to the page, it leaves just a blank white page. (Fortunately, the process works in the removal of the element)
  
  The link to the column in the report Page 11 goes back to Page 11. (I tried to change to a new Page 12, including a few branches immediately back to the 11 Page, but it does not solve the problem) The link name is APPLICATION_PROCESS = REMOVECART, clears the cache on Page 11 and sets the value of a hidden element (P11_ITEMCODE) to be referenced in the App.Process.
  The REMOVECART process is a SQL/PL block running On-Demand"that says:
  
  DELETE FROM INFO_CART WHERE ITEMCODE =: P11_ITEMCODE;
  UPDATE the STATUS value INFO_INDEX = 'In', ORDEREDBYUSERID = '0' where ITEMCODE =: P11_ITEMCODE;
  
  There is no Conditions, permissions or authentication on the process or the link in the column. Ideas, why the process is not back to the Page based on its execution?

  It appears when you run the application process of the URL which deal with the application will run and that's it. You will need to provide a code in the process of redirection request to the url of the page you want to go.

  Another option is to create a process to run the application process and make it conditional to a certain request value that you can set in your link. Look at the page 4 ("basket 2") for an example.

• BlackBerry, Blackberry Q5 Q5: Verbal announcement of what is on the screen, can not close the applications by typing, cannot access settings

  Hello

  This mornign I had a surprise. For some reason the phone seems to freeze when I open facebook. I thought who would be corrected by restarting, but facebook would be available temporarily and then it would freeze. The same thing happened with everything I opened on the Q5.

  In the end, the phone seems to be put in place for people with a visual impairment. Whenever I touch the screen, and then even when I want to reconnect, there would be verbal instructions and descriptions of what is on the screen. For example, I received the instruction to slide up to open a session, and then whenever I touched one of minimized applications the phone would be such which program it is and what number it is out of the apps on screen.

  Is there a shortcut on how to disable this setting?

  Or what I can do to regain access?

  Thank you

  Hello

  From what you describe, it seems that somehow you have turned on the functions of "accessibility". Go to settings > accessibility and check all those involved to be sure of anything you want.

  Good luck!

• Cannot run the application: Java Virtual Machine cannot be loaded. Class not registered

  I want to launch the TI Flash Studio program on my computer windows 7, but the above error when I try to open the program, when I download the suggested 'Virtual Machine' I get another error message that says that the 'Virtual Machine' is not compatible with windows 7, how can I solve this problem?

  Hello hallaman3,

  I did not find TI Studio listed in the Windows 7 Compatibility Center. I suggest that you contact TI to see if they have an updated version.
  I found a new version of TI connect to be compatible with Windows 7. Not sure if you need it for TI Studio.

  You can also try compatibility mode.

  If the program is not compatible, then you try to install and run the program in compatibility mode.

  Use the following steps:

  (1) right click on the program

  2) click Properties

  3) click on the Compatibility tab

  (4) select run this program in compatibility mode and select Windows Vista or other operating system, the program has been run successfully.

  Check out the link here: make sure to run older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  If compatibility is not successful, then try and run the program compatibility problems:

  1. open the troubleshooting program compatibility Troubleshooter by clicking the Start button.

  Then click on Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under programs, click on run programs for previous versions of Windows.

  2. follow the instructions in the troubleshooting.

  If you are unable to install a program, insert the installation disc for the program and, using the Troubleshoot utility, navigate to the program setup file, usually called Setup.exe, Install.exe, or something similar. This utility is not designed to work on programs that have an .msi file name extension.

  I hope this helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Oral question to the Lorien or other experts MSFT

  Below, I followed Loriens feedback when I get a blue page and recycle just the start. Under safe mode I dsckchk & smf is run at the command prompt, no problem... MRG device - no red flags, etc... AVG antivirus ran scan - no problem.

  So, I resorted to reinstalling my Dell Inspiron 531 computer OEM DVD. I noticed during the installation it tells me that I stil would file under old windows with files. It was working fine I saved my photos.

  Computer worked fine for a day or two and I reinstalled some software. But tonight, when I restarted the PC after the installation of the updates of windows PC Gets the same blue page with some of the info:

  Stop: nvlddmkm.sys - address 8bbdb240Base at 8baee000, Date stamp 4ba95a19

  Try to reset the display driver and recover from timeout failed. Clear the options of memory of the Bio for the implementation of cache & concealment.

  I restarted and went into setup via F2 mode. I've looked under all possible options to disable bios caching and shadowing and could find nothing to resemble this info.

  I will try to restore the PC to before the last problem/windows update to see if it works. Any help much appreciated.

  Charlie

  Thanks for the compliment in your title of the thread, but I am not associated with Microsoft (although I have some certifications) and another person here volunteer my free time trying to help others.  There are many with lots more expertise I have - although I am learning.

  In my opinion, only a system restore is the first action appropriate to resolve the situation, as you have described.  Make sure that you not download on Windows Update device drivers. In fact, you must disable automatic updates in Windows Update driver as follows:http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/.

  Once you're running, you must verify and update your video card driver. Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get drivers (and you should be for at LEAST your video card), get the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  Follow these steps to get the drivers:http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows:http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html...

  I'm not sure what the hell memory options for caching and shadowing using BIOS (and I don't have your BIOS to check).  Like you, I just need to scroll through ALL the options provided to see if I could find the options.  If you have done this, they are probably not here (despite the message).  It is possible that the pilot expects that these options are available in the BIOS.  You can consult your computer manufacturer to see if they have an updated BIOS available for your specific system (ONLY to get them from the manufacturer and make sure that they are appropriate for your system specifically - even if you need to talk to someone there to confirm).

  If you continue to have problems caused by Windows updates, then please post in the Windows Update forum: http://social.answers.microsoft.com/Forums/en-US/vistawu/threads.  Include the exact version of Windows you are using (32-bit Vista Business SP2 or other) as well as the names of the updates of the problem and their numbers KB.  Also include the problems you encounter when you install these updates in all the information you can provide.  They will help you to get the updates installed correctly - they are the real experts in this (not us).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Question on the Application Google Talk blackBerry Smartphones

  When you use Google Talk to IM with someone appear on your Bill as do normal texts?

  My Verizon bill shows what time each of these texts has been sent and to which they were sent.

  Given that Google Talk program is based on the internet I can't imagine he would show a monthly statement as phones texts would be but would like to be sure before using it.

  Thank you for your time.

  Hello! With the help of Google Talk uses data that are different from a text message that is sent using the same gateway as a phone call.

  You will not see specific information on the use of data on your Bill. Depending on your data plan, it will show you how much data you used for this period of fact.

  Hope that answers your question!

• Newbie question: list the Configuration of virtual machines and data warehouses

  Hello

  I'm new on using powercli how to list all virtual machines in a certain data center, their memory, Procs and what data warehouses they are on.

  I know you can use get - vm | Select-object name, NumCPU MemoryMB but if I add DatastoreIdList as well, it doesn't seem to work.  What Miss me

  Thank you very much

  Laurence

  That's right, you could do

  Get-VM MyVM | Select Name,@{N="DS";E={[string]::join(',',($_.datastoreidlist|%{(Get-View -Id $_).Name}))}},Description |
      Export-Csv "C:\test.csv" -NoTypeInformation -UseCulture
  

  Just look at whether the separator for CSV is be a comma in your culture, you probably need to adjust the separator in the Join method!

• Question on the application of a patch PeopleTools (PT 8.50.18)

  I'll apply the PeopleTools 8.50.18 patch and ran into an issue in the doc of patch. Can I run the Setup program on Windows and Unix? I'm misremembering probably something transfer on installation on windows and do a server under UNIX.
  
  4.1.2 step says to use the license code to install the base DVD PeopleTools. Because I'm not the one who did this, I can get this code in the PSOPTIONS table, or does the product license code?
  
  Thank you.
  
  Published by: Roger Baker on May 10, 2011 15:55

  Roger,

  You must apply the hotfix to tools to each PS_HOME.

  Server transfer that remember you is probably for the objects of application such as sqr and cobol source code. For current releases, if you applied a patch package, bundle or maintaining applications, these transfers would be done through the wizard to change.

  License codes are available at:

  [url http://www.oracle.com/us/support/licensecodes/peoplesoft-enterprise/index.html] PeopleSoft Enterprise License Product Codes

  Kind regards
  Bob

• question of the application of patches.

  Jin
  
  I have a couple of one - out of app my 11.5.9 apps approx.
  I have CM at the db level.
  
  So I need to apply patches to applications on the two first on the db layer.
  
  a stop just have sql and odf to download. do I still need to apply these patches twice?
  
  Thank you.

  Hello

  So I need to apply patches to applications on the two first on the db layer.

  Yes.

  a stop just have sql and odf to download. do I still need to apply these patches twice?

  What is the patch number? If the readme says to apply on the CM/DB node then comes to do otherwise, you should apply on all nodes.

  Kind regards
  Hussein