Backup size seems too big, then save too little...

Similar Questions

• Hi, Firefox does create backups of autmatic of bookmarks, then save them in a default location?

  I had to reset my PC & re - install FF without first using a manual backup of bookmarks. The reset process apparently retains all data files, but does not keep Apps. I hope I can do my new Firefox to the old bookmarks file and... Hey presto... I retrieve my favorites?
  (Thanks in advance for your suggestions)

  The usual kind of reset in recent versions of Windows keeps your old user folder but it moving here:

  C:\Windows.old\Users\your-user-name\
  

  You will find this file? If so, your Firefox data are probably here - and here's how I suggest to access:

  First of all, it would be useful to set windows to display the hidden files and folders. This article has the steps: http://windows.microsoft.com/en-us/windows/show-hidden-files

  Then click in:

  Username\AppData\Roaming\Mozilla\Firefox\Profiles C:\Windows.old\Users\

  Note: you may find a cache under AppData\Local folder, but everything important is under AppData\Roaming.

  Here you can find one or several folders named random semi. Who has most recently updated content is probably the one you want to restore from.

  Bookmarks only

  Go down the old bookmarkbackups folder and copy the last two backups in a location such as the desktop.

  The restore feature will replace the bookmarks in Firefox by default (and what you added since the reset) with all like bookmarks. If you want preserve newly added bookmarks, use the first, export function before the restore, then the import function later. The following articles have details:

  • (Optional) Export Firefox bookmarks to an HTML file for backup or transfer bookmarks
  • Restore bookmarks from a backup or move them to another computer - to access backups on the desktop, use the command 'Choose file' menu
  • (Optional) Import bookmarks to an HTML file

  Success?

  Complete restoration

  This post has my suggested procedure to resurrect your old wide profile in your new installation of Firefox. Please note the use of the copy instead of move throughout the process. This allows you to try again if it fails somewhere along the way.

  https://support.Mozilla.org/questions/1024189#answer-638319

  A little luck?

• Cropping creates the HUGE file - too big to save

  Hi-

  I am running PS CS3 and have developed a problem with trimming using the crop tool.

  When I crop an image like this:

  4368 x 2912 pixels (size in pixels 72.8 M)

  12.133 8.089 x inches, 360 ft

  size 250 960 KB

  I get a file like this:

  5760 pixels x 4320 (142.4 M dimension in pixels)

  16 x 12 inches, 360 ft

  size 2 145 800 KB

  This file is too big for the PS, then save.

  What is going on? I have not changed anything with the PS, except RAM adjusted according to reviews of Tim Grey.  I found an ad that says to reset preferences, so I tried, but it did nothing.

  Thank you!

  Press the clear button in the Options bar for the crop tool and make sure you enter the correct units in each field!

• Several VSS writers fail and my backups are failling too. Need help!

  Several VSS writers fail and my backups are failling too. Need help:

  I have a desltop installed SP3 x 64 XP and a laptop with seven x 64 SP1. In both the machine that my backups fail. I'm trying to back up data by using boats to storage, backup Windows also is failling. I'm taking a full backup on a USB external drive (2 TB).

  I did "vssadmin list writers" and showing several writers are in the failed State.

  I've done SFC/scannow, it did not help. There is no error in the disk and Chkdsk.

  I don't know how VSS works and how to solve the problem. Help, please!

  A lot of people told me they found this informative article. That's why I upgraded that and display back again.

  -------------------------------------------------------

  Before you stat is working on this issue make sure that the volumes have no system disk/file error. Run Chkdsk and ensure.

  (1) in the case of a failure of backup/writer, we first check the drivers associated with the VSS backup.

  These drivers are:

  VOLSNAP. SYS

  NTFS. SYS

  SWPRV. DLL

  -Check the version of above mentioned MS 3 files and update using MS Hotfix.

  If we have installed other suppliers, who might be the supplier of StorageCraft, Symantec suppliers and suppliers of Acronis, he must ensure that their files are also updated.

  Note: You can see the list of suppliers using this command: VSSADMIN LIST PROVIDERS

  Some of the DRIVERS PROVIDER commonly find are:

  stcvsm.sys

  symsnap.sys

  snapman.sys

  (2) this step is performed only when we find him

  VSS writers in a failed State. If we find the stable writers and backups still fail, or we get errors, do not perform this step if you please.

  In this case, the VSS writers fail, we can delete the following registry key, after of course saving and restart the server.

  HKLM/Software/Microsoft/EventSystem/{26c.../Subscriptions.

  This key will be automatically recreated when you restart and writers should return to the stable state.

  The writers pending the completion status is not a problem. It's also good that Stable.

  We can do on the Server 2003, 2008 and 2008 R2 OS as well.

  However, in Windows Server 2003, after you delete and restart the "vssadmin list writers" server cannot display all the writers, in this case must register the dll:

  For a list of the dll files to register, please check KB: http://support.microsoft.com/kb/940184

  Note: The reinstatement of dll in Windows Vista/2008 and especially is NOT recommended.

  (3) if we have only one / specificwriter (s) in a State of failure, which would always be SQL, EXchange, IIS or NTDS, then we have need to revive their respective service Console of service.

  If they fail repeatedly, then make sure that the application and its components are updated. See their respective engineers immediately. Make sure that the latest service packs and patches are installed.

  (4) make the foregoing, resolves generally 80 to 90% of the questions. If we believe that the issue is occurring, or we have VSS event errors, it may be the providers, the origin of the problem. If the creation of the snapshot does not properly, it can affect writers and other components involved.

  Please check providers using "vssadmin list providers. If we find any other provider, other than the Microsoft software shadow copy provider, we have to remove from the list.

  To do this: start the registry editor.

  HKLM/System/CurrentControlSet/Services/VSS/suppliers/GUID.

  One GUID would be for Microsoft Software Shadow Copy provider. The other GUID would be for other providers such as StorageCraft. We will save the GUID, and then delete it. Then restart the machine.

  Now when we do vssadmin list providers, we will see only the default Microsoft provider.

  I have seen in many cases where our supplier of StorageCraft may not work properly and continue of not not the authors. In such

  case, if we get rid of the supplier, then the issue is resolved and not re occurs.

  -However this would impede the functionality of StoaregCraft or any other similar to this backup software.

  That's why to engage respective software tech support for further assistance.

  (5) If a shadow copy is enabled on the volume, make sure that the storage area is set to the default location.

  For example:

  If we take a snapshot of C: then the storage area should be C:

  We are changing that, if we do not have enough free space (at least 300 MB) free.

  We can click with the right button on the volume, goto the cliché tab and change it accordingly.

  Also note that the minimum value of the storage area should be 300 MB and maximum can be 3000 MB.

  We can also set any value between the two, which is a multiple of 300, 600, 900, 1200, 1500 etc... According to the available space.

  In the cases where errors in the event viewer on wait times (event id: 12298, 12310, 2004, 12290) then we also need to put the MinDiffArea in the registry.

  HKLM/System/CurrentControlSet/Services/Volsnap

  Right side, new DWORD VALUE - "MinDiffAreaFileSize" - change and set the value between "300-3000 Mo" or any multiple

  300 between the two. Ideally, we can define it on 3000 MB which works even better if we have space.

  Ref: http://support.microsoft.com/kb/826936

  (6) also, please make sure we have plenty of free space. If we go by the book, a snapshot requires at least 10% of the volume

  to be free.

  Storage controllers (SCSI/RAID controllers) could also be a problem and may need to be updated.

• my "next back up" currently reads 105 MB, but when I save the backup size is 4.6 GB

  This has happened to me for a while, I hope that someone out there have an idea!

  I save only AN app in iCloud, so my 'next to the top' currently (and usually) 105 MB, but THEN when I backup the backup size is 4.6 GB! I'm 39.3 KB Notes, Documents and data currently as well... there a any sense to anyone? What Miss me?

  < re-titled by host >

  I think it is normal.  The same thing happens to me.  In my view, once make you a first backup to iCloud, other "backups" are incremental.  Only changed data on the device (since the last backup) are added to the existing backup.  If I am wrong, perhaps someone could correct me.

• for some programs screen size is too small and I can't expand. This is especially true for some programs of online games like bridge base online.

  Some programs to fill only a part of the space available on the monitor (maybe 25%).  The size is too small to use more easily.  I notice it especially with some of the online training programs.

  Hello

  • This happens to you with a game or all games?

  Do a right click and go to the shortcut properties and find the box where it says 'run' pass the value normal in full screen.

  If this does not help, configure the following setting and check:

  (1) right-click on the game shortcut icon, click on properties.
  (2) on the shortcut tab, go to run.
  (3) in the drop-down list, select expand.
  (4) click on apply to apply the setting.
  5) click Ok to confirm the change.

  Also, I suggest you try changing the hardware acceleration, here are the steps to change the hardware acceleration.

  1. Select start > Control Panel
  2. in the window of the Control Panel, click appearance and personalization
  3. click on personalization > display settings, and then click Advanced settings.
  4. go in the Troubleshooting tab, and then click on change settings.
  Note: The settings will be disabled if the graphics card driver does not support disabling hardware acceleration.
  5. move the hardware acceleration slider until it is one notch to the right of None. It is the basis of acceleration.
  6. click OK twice, and then close the window.

• vSphere - KS.cfg: line31: virtualdisk size is too large for vmfs volume

  Can someone tell me what the problem with my script KS.cfg? It contains the following information, but I get an error stating "...". line 31: virtualdisk size is too large for vmfs volume (needed size 27176 MB > size available 26184MB)... »

  He complains, I increase the size of what he said and then, he complained again and again and again and again each time...

  • BEGINNING of KS.cfg *.

  AcceptEULA

  keyboard us

  AUTH - enablemd5 - enableshadow

  bootloader - location = mbr

  clearpart - overwritevmfs - firstdisk

  1. Uncomment the esxlocation line and comment out the clearpart

  2. and physical partitions to do a non-destructive reinstall.

  #esxlocation - uuid = 41cff7dd-4dd9-400D-a262-9ebb06565cc9

  install the cdrom

  rootpw - iscrypted bonnefin

  time zone "America/Vancouver".

  network - addvmportgroup = true - device = vmnic0 - bootproto = dhcp

  part "/ boot" - fstype = ext3 - size = 1100 - onfirstdisk - asprimary

  the part 'none' - fstype = vmkcore - size = 110 - onfirstdisk

  part "Storage1" - fstype = vmfs3 - size = 26184 - grow - onfirstdisk

  VirtualDisk "esxconsole" - size = 26176 - onvmfs = 'Storage1.

  part 'swap' - fstype = swap - size = 1600 - onvirtualdisk = "esxconsole" - asprimary

  the part "/ var/log" - fstype = ext3 - size = 4096 - onvirtualdisk = "esxconsole".

  part ' / var' - fstype = ext3 - size = 4096 - onvirtualdisk = "esxconsole".

  a part "/ home" - fstype = ext3 - size = 2048 - onvirtualdisk = "esxconsole".

  part ' / tmp' - fstype = ext3 - size = 2048 - onvirtualdisk = "esxconsole".

  part "/ opt" - fstype = ext3 - size = 2048 - onvirtualdisk = "esxconsole".

  part ' / ' - fstype = ext3 - size = 10240 - push - onvirtualdisk = "esxconsole" - asprimary

  % post - interpreter = bash

  • END of KS.cfg *.

  VMFS needed his own space for metadata, and you have not left a lot to her (26184-26176 = 8 MB).  You need a minimum of about 500 MB - is better around a gig or 2.

  -Matt

  VCP, vExpert, Unix Geek

• "The new page size is too small": how?

  The width of the page in my book was 4,125 "with 0.25" margins on the sides. The title pages of each section have tabs to purge, and I needed to increase the size of the page to remove a text which was on the tabs, but off the page. I increased the width of the page 6 "and deleted text, but now I can't change to 4,125" wide. FM said: "new page size is too small for some custom column layouts. Why? It was 4,125 "before...

  I checked my master pages, and there are no pages that have columns that are too wide for one page 4,125 ". None of the text boxes exceeds 3.625 ".

  Sometimes I can bypass this message by reducing the width of page in smaller increments, but in this case the message happens even if I reduce the width to 5.99 ". I also tried to decrease all the text boxes to 3.5 "but get the same message.

  Any ideas?

  Thank you

  Tami

  What specific version of FM (help > about) and o/s?

  I often met this already too, in all versions of FM. It seems that there is some routine check who comes in is that after we resize the pages and it won't let go.

  You mention the title pages have tabs to purge, but you did not say specifically, is to know if the text off page is serving on a page of the body or on a master page?

  When you deleted the text in the tab, you also remove the frame, the text was? If this isn't the case, it's probably what FM complains, because he "knows" now on the block of text off-page.

  I'm racking my brain to remember what solutions I found...

  Sheila

• "Backup restore" will restore the backup iOS version too?

  "Backup restore" will restore the backup iOS version too?

  Laughing out loud

  It will always restore the latest version of the software available

• Mobile site seems too small and on the left of the page

  When I implemented a mobile site and put a picture on it, the live version seems too small and on the left side of the screen.

  I checked if there are objects outside the framework, but it does not exist.

  I tried everything: a fairly small image, adjusting the with, remove anything that might be outside the framework from scratch and put a small random image in it, etc.

  What can be the problem?

  

  You can have a box that is wider than the margin of page and overlaps the right margin or something empty to the right... Check your muse file to make sure that nothing is right margin of page on the schema model or the page for the version of your phone.  CTRL + A to select the entire document... This will highlight all boxes and components. My guess is that you have a box hidden in the right margin.

• Why backup size don't add up?

  I have a problem to backup my phone.

  If I'm going to manage storage

  Documents and data: 43.6 MB

  Mailing address: 17.5 MB

  If I go into my iPhone

  Backup size: 3.7 GB

  Then back up size: 0 bytes

  I have most of the applications off including photo library.

  What is eating up 3.7 GB for backup for iCloud?

  I also tried to delete the backup to my phone.

  When I save, the size was 3.7 GB.

  Thank you!

  I thought that partially the problem.

  I have an iPhone, iPad and Macbook which use the same space to iCloud. Apparently the messages take place backup, and there is no way to turn it off unless you remove all the messages.

  I deleted all of the messages on my Mac, iPad and iPhone, and I was able to free 3 GB space iCloud.

  Even after deleting my messages, it did not free space immediately. I had to delete the backups and backup fresh spring. Then the size reflects the changes.

  I guess that if send you / receive a lot of picture messages and you have multiple devices using the same iMessage, you end up losing iCloud spaces. I could be wrong, but they seemed all backed up separately, even if they are the same messages.

  Anyway, there is always a mystery. After you delete the messages, iPhone and iPad now only mix 800 MB. However, if I go to iCloud on my Mac, it says I have 600 MB of documents.

  I have almost nothing on my player iCloud, less than 30 MB. Where are the documents of this mystery? I also deleted all my messages on my Mac, and photo library is not checked.

  Now my iPhone uses 600 MB, iPad use 200 MB and mystery documents use 600 MB. Full use is 1.4 GB and I have 3.6 GB free.

  Someone know where I can find the documents of mystery?

  Thank you!

• I'm new to Lr, can someone tell me if there is a limit of size PRACTICE to a Lightroom catalog file? Should I keep the file size within a certain range of size of GB and then create a new? Thank you I would be grateful of any advice.

  I'm new to Lr, can someone tell me if there is a limit of size PRACTICE to a Lightroom catalog file? Should I keep the file size within a certain range of size of GB and then create a new? Thank you I would be grateful of any advice.

  He has no such limit, and in fact some users in this domain and other forums report catalogues over 1/2 million pictures works well.

  The idea to create multiple catalogs because you don't want to get too big catalog file size is a bad idea that you should never think of it again.

• Help with opening of CD disc too little fear of support against the laptop pin HP Pavilion dv2617us

  Learn to use the laptop just wanting to play the CD. The tree seems too big for the CD to fit above him. Is there something I need to do first?  I see the teeth around the axis should they compress the CD we slump on it?

  Thanks for your response in advance.

  Hello

  Normally, it has 3 small latches, they are there to keep the CD sit properly. Should be ok, just press the CD, you may be able to hear a 'click '.

  Kind regards

• Why when I try to print a web page only offers save the page and then save it not?

  Up to two web days ago pages printed fine for me, now, I only gave the option to save as a print job. XPS file - and then save it. If I cancel, it tells me that there is an unknown printer failure but testing printer just fine.

  Hi sofg777, when you're on a page you want to print try to press ctrl + P, and then select a different printer than the Microsoft XPS Document Writer, who seems to be set as the default printer in firefox at the moment.

• Too little of the format specifiers.

  Hello someone can help me format this correctly? It keeps giving me the error too little the format specifiers.

  At some point, you mixed up of your string format and you put the string name. Wire directly your group name in the name of Group on the TDMS VI entry. And then thread the pipe name format string in the format string driveway. See here:

  

  You must do this to 3 loops.