Question of the loading Animation

Similar Questions

• Add-ons Manager will not open watch just the loading animation

  Try to look and check out the modules using the Manager of modules as follows:
  Tools - modules leading to new tab opening, but all that is displayed is the loading with the timer animation icon. I've now left on for more than 45 minutes before writing this information.
  The problem arises after the upgrade from Version 4 to Version 5 earlier this year.

  I had this problem a few hours ago. It acts like the Add-ons Manager is "stuck" loading all Extensions and Plug-ins.

  Try this "correction". (It worked for me.)
  Restart Firefox in Mode safe (go to help-> restart with modules disabled...)
  In Safe Mode to display the Manager of modules again. It should take over.
  Verify that you can see the list of Extensions and Plug-ins.
  Manager modules, additional check updates.
  "Restart Firefox to return to" normal ".
  Start the add-on Manager.
  It should load normally.

• How to show the loading animation

  There is a 'loading... "animation when the Application is started for the first time."
  I want to know, how can I show the "Loading" a taskflow loading is underway?
  
  Thank you
  
  Shahab

  Hello

  unless you are looking for a programming solution, there is no splash screen that display for the loading of the workflow. You can use http://download.oracle.com/docs/cd/E21764_01/apirefs.1111/e12419/tagdoc/af_statusIndicator.html, which when added to the parent page shows a busy for queries (spinning O) status

  Frank

• White space behind the loading Animation

  I have a DW doc, with black color background defined in the properties of the page.
  
  I have a table with text and a sfw. When the page opens in the browser, like loads of animation there is a big white hole in space of swf. I tried to darken the picture in background and same color makes a black png for the table to bind to. The horrible white hole the rest.
  
  Been to all the patches?
  example of
  www.cfhda.com

  Select the SWF in DW - change the * background * color in the Panel properties of DW.

  Chris Georgenes
  Animator
  http://www.Mudbubble.com
  http://www.keyframer.com
  Adobe Community Expert

  *\^^/*
  (OO)
  <---->

  iJack555 wrote:
  > I have a DW doc, with black color background defined in the properties of the page.
  >
  > I have a table with text and a sfw. When the page opens in the browser, as the
  > animation loads there is a big white hole in space of swf. I tried to blacken
  > the table in background and same color is a black png for the table to
  > link to. The horrible white hole the rest.
  >
  > Know all the patches?
  > example
  > www.cfhda.com
  >

• Question about the use of the battery double on Portege M100

  I recently had a M100 with a pair of slim-Bay batteries optionally. I have a question regarding the loading / unloading of sequence.
  It seems that when loading main battery is charged 1 followed by the secondary battery (removable). This seems logical and fair enough.

  However when it comes to the main battery appears to discharge 1 with secondary battery not passing it is 99% of the value.
  I expect the machine to unload 1 secondary battery so that in the case of having 2 secondary batteries, you can redeem them on without any worries. Also when you then install the CD player, I also, then you max left in the internal main battery autonomy.

  Are there settings to change the way in which my machine seems to work?

  Hi Max

  I'm not a technician and cannot explain how it works exactly. All that I know is all of this is controlled by electronic power supply and the user has no influence on it, and as far as I know, there is no settings allows you to specify the energy consumption.

  I agree with your opinion, but I think that there is nothing to do.

• Anyone know when will fixed the problem of material with the "IPAD PRO"? The question that keeps it from starting after the load.

  Anyone know when will fixed the problem of material with the "IPAD PRO"? The question that keeps it from starting after the load.

  According to Apple, it has been addressed in the latest update of the iOS, iOS 9.2.

• A few questions about the making of the animated for a site Web Nav buttons

  Hello, I have a few questions about creating some animated for a NAV buttons.

  There are 2 actions I want to trigger on pouting above.

  If I want to use a static (PNG) image I created in Photoshop for the real button, can I use that? I want well drag the button down on the passage of the mouse and drag upward on the mouse. If I push the part of the "Web" button (sorry, that it comes from a Photoshop guy) it will disappear in the final animation? Another way to say this, if I put something lively off the coast of the white area, it no longer appears in the movie (.swf) when it is published?

  For the second part. You can see a bit of what I want to do if you look high Nav of the page of the website: http://www.photoshopsupport.com/index.html

  I need the 'light' above the button and it's going to be on another < div > color so I can't put a solid color of BG for my flash document. But I want to get the effect of the 'bar' lighting up above the button and the real key slide downwards to pouting on.

  You can provide any help would be greatly appreciated.

  We target the dynamicaly graph. Since the MouseEvent is now on the invisible sprite and not the graph itself, the one-for-all function has no reference to this graph. You can access the invisible sprite with event.target (or event.currentTarget), you can also target the chart because we declared "mygraphic" custom property to serve as a reference for the graphic. Thus, event.target.mygraphic is the benchmark for graphics.

  Of course, this is just an example. There are other variations of this trick.

  ____________________

  Design Cyboide

  Web site creation

• Animation during the loading of the page

  I just created an animation using Fireworks which, according to the tutorial can be used as entertainment during the loading of the page. What format this file must be in and where do I download it on the server... (someone has a tutorial)... one I used went, step by step, how to do it, but did not operate on the site... Thank you

  "whatisgood" wrote in message
  News:go3jlv$29$1@forums. Macromedia.com...
  > I have just created an animation using Fireworks according to the tutorial
  > can
  > serve animation while the page is loading. What format for this
  > file
  > have need to be and where do I download it on the server... (anyone have one)
  (> tutorial)... one I used went, step by step, how to do it, but does not
  > talk
  > make it all work on the site... Thank you
  >

  Im not that warned with animation in FW, but I'm assuming it would be a
  animated gif format.

  When you turn the image, the actual file or the path is not so much the
  important thing, making sure that you have correctly linked to the image
  destination on the page.
  When you upload to the server, make sure that you keep the file
  structure of your local files. If you use dreamweaver to ftp and you
  have set properly your site in dreamweaver, and then download the image
  your local site files should maintain this structure.

  Hope this is useful

  Concerning
  Fiona

• Question of the method of loading.

  I was looking through the accessories for the XOOM and noticed a car with an owner Jack charger. What bothers me. All my other current mobile devices (headset Bluetooth, Droid, and even a GPS which I never use more) all load them via the Micro USB port. Why should I buy and carry MORE cables and Chargers for a XOOM when I already have Micro USB Chargers everywhere? It's kinda bullcrap, IMHO.

  The Micro USB input also charged the device?

  No, the USB port cannot be used for the load. You'll need approved chargers that take the port of loading round for Xoom.

• How to show the loading (wait screen) with animated image dialog between the screens

  Hello

  Can anyone show how to insert the load between two screens dialog, while the second screen is taken

  loading time?

  I tried the examples given in the forum but no luck

  There is an update about it here:

  http://supportforums.BlackBerry.com/T5/Java-development/sample-quot-Please-wait-quot-screen-part-1/t...

  Note comment added to the article as well - this is a useful Variant.

• How can we change the green 'Adobe Captivate"loading animation in a SWF file?

  Hello!

  I would like to replace the loading image that I inserted (below) to something else.

  It is the loading image that appears when the SWF file loads in a browser.

  Does anyone know how to do this?

  Thank you

  

  Go to edit, preferences, project, start and end and the icon of the browser to the right of the Preloader to choose another preloader.

  Lilybiri

• How can I control the gif animations?

  I have a project where I need some animations. The animations, that all have been created in After Effects. Now I can use png sequences, but these are very big and I need much the animations running on the same time. So I prefer to use gif animations. So my question: I can control when to play the animated gif but I can't play more than once. Is there a solution?

  Thanks for responding!

  Jannis

  Hello

  I see... you control when it displays. Technically, this is not the same thing that control the animated GIF; you just control when you see it. EA only recognizes GIF as image format and can not make the browser plays from the beginning as the first time that it is displayed or when it performs a back loop (if your animated looping GIF).

  However, you could do something similar with an additional image file or two, jQuery and css background-image "load" the GIF file into a transparent image. Here is a link to an example that always runs the GIF animated from the beginning:

  https://creative.Adobe.com/share/52f15194-875B-4604-8857-9b9bf5f78e04

  A single line of code that does the work is in the playBtn click handler.

  HTH,

  Joe

• Web site with the loading bar

  Hi all

  I have a site I created in AS3. Currently, there is a home page main before entering the site (this is index.html). This is a short animation, and then you click a button to enter the main website. It takes you to a second page HTML (home.html) where the rest of the site is built in flash.

  I want to be able to have everything on ONE page and have a loading bar precede everything. The website itself has a charger inside to display text and different images, and I fear that the amount of time it takes to load to start (the short animation) and to go to the site even (most of the images) is seriously detrimental to the flow of the Web site.

  My questions are essentially the following:

  How can I put the animation in the same location as the Web site? Do I need a charger in a charger?

  How to make a bar of load shot all this?

  Thanks for your comments. I hope it is something simple that I still have to learn. Thank you.

  -Ted

  kglad wrote:

  you embed not home.swf index.html.  You "load" home.swf into index.swf using the loader class.

  Thus, for example, in index.swf:

  yourbtn.addEventListener (MouseEvent.CLICK, f);

  var ldr:Loader = new Loader();

  var urlR:URLRequest = new URLRequest ("home.swf");

  addChild (ldr);

  ldr.contentLoaderInfo (ProgressEvent.PROGRESS, loadprogressF);

  function loadprogressF(e:ProgressEvent) {}

  View your preloader using

  e.bytesLoaded and e.bytesTotal;

  }

  function f (e: Event) {}

  LDR. Load (urlR);

  }

• I can't get the move animation to automatically trigger the next slide

  Hello

  New to Keynote. I wonder if there is a way to trigger the next slide to load after doing an animation out, that does not involve having to make an additional click? For now, I have text that moves transition and get him out on click, which then leaves me a blank screen, rather than the transition to the next slide.

  Pointers or help with this would be really appreciated.

  Click the background of the slide from the slide that has the text animation: Inspector > Animations > Transitions:

  the value of the drop of Transition start automatically

  Enter an amout for the delay, if any

• iPhone 5 s watch the load but will not load

  My iPhone 3 months 5 s done this time in ten days. When the charger is plugged in, it shows the loading sign. But the percentage has not increased and finally the battery gets drained. After that, it shows the screen below. I tried to charge the phone after that continuously for more than one day and not luck. Instead forge the phone for a day or two and plug the charger - it comes up with the apple logo. And behaves a good boy a week before the issue resurfaced surface again. Tried all the settings I found on the internet and no luck. It does not start in safe mode as well.

  

  I took it to the istore. They tried to Flash, check the battery performance. Everything was perfect reported. After a day with them, he would be back to normal and they return saying that the problem is solved. They seemed helpless. However, I managed to show them the question to live when he did not, and showed support. It has been three times I gave the phone to the istore and had back in the same State.

  I'm the only person who is faced with the question of all the lucky iphone owners?

  Should I ask for a replacement? I am facing this problem since the first week, I started to use the phone. The inconsistent behavior irritates more that guys istore says they will not be able to request a replacement. Ask a serious help in this. I don't think I can live with that.

  I think that this forum is noticed by the technicicians\officials of Apple. Any help on this would be much appreciated!

  Thank you!

  See you soon!

  Amandine

  Hello

  Back iPhone to store ask for a replacement.

  Your iPhone has had an intermittent fault

  See you soon

  Brian