Question of Wireless Lan L410 (0616-A18)

Similar Questions

• Satellite Pro A60: Question on wireless Lan

  Hi, I have a Pro A60. Documentation indicates that the machine is ready for Wi Fi. However I can't activate it. Can someone help and tell me if the a60 is WiFi ready? Record: P4 2.8 GHz, 60 GB HDD, 512 MB.

  Hello

  I found useful information on this laptop.
  As far as I know that the wireless card is optional on this unit. This means that this device has been delivered without wireless network card, but it of possible to improve this machine.

  Best regards

• Version of the software Cisco Wireless LAN controllers & Licensing (controllers HA and APs Adder & licenses basic questions)

  In fact, one of my clients has two Cisco 5508 wireless LAN controllers installed in a site and back up and running now. one of them running software version 7.4 and the other running software version 7.6. Each of them works as a stand-alone controller with number of access points. Based on this scenario, answer below concerns:

  • Can we transfer all active licenses at one of them and use it as a HA free of charge?

  • Up to which version of the software, we can improve these controllers without any extra charge?

  • What we must do if we want to move two of them to version 8 software?

  Waiting to hear from you soon about my concerns.

  Here are a few notes:

  -Only licenses Adder can be reheberges to another controller. Base license cannot be rehosted unless the unit is THAT RMA would be.

  -Too long the WLC has a minimum of 50 access point license, so that the unit can be used for HA N + 1 or AP SSO.

  s ' it use SSO of AP, the WLC must have connections to subnets for layer 2 even due to the IP address of the interface.

  HA N + 1 can be used in sites different especially if the subnet do not align

  -Scott

• Pavilion P6 - 2176 s: update the ralink 802.11n wireless LAN card

  Receive a pop up saying that there is an update for ralink 802.11n wireless LAN card.

  Is - essential?

  Bad experience with the update of things that were not crucial.

  Thank you!

  Hello @css321,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post about the way your computer displays a pop-up message prompting you to update the installed wireless card. I'd be happy to help you in this case!

  If you encounter any issues connecting to a wireless network on your computer, I wouldn't count the update as crucial. If your computer is having problems connecting to the network, even if the problem is intermittent, it may be a good idea to install the update.

  I hope this helps, and if you have any questions or concerns do not hesitate to post back!

  See you soon

• InPro Comm IPN2220 Wireless LAN Card - need driver for Vista OS

  Hello

  I'm new to the Forum and I think that it is just the place to get answers to my questions?

  OK, I use the laptop Toshiba Equium L10 and I just downloaded and installed the "public" version of Microsoft Windows VISTA beta 2.
  The installation went very well and it took about 40 minutes and considering that it is only a 1.50 GHz Celeron (M), which was very good, but I'm having problems to make a software/driver for my '' integrated '' InPro Comm IPN2220 Wireless LAN Card, so for now, I can not connect to the internet on this subject. (On the bottom of the laptop, it has ' FOXCONN T60N871 802.11 b/g W/LAN Card "which I think is the real name for 'InPro Comm IPN2220 Wireless LAN Card'.)

  I installed the software/driver LAN wireless from the utility CD, and although the software seems to be no problem, Windows does not detect the card and does not install the driver for it. I also tried Win Vista update, but nothing is found.

  Does anyone know ho to get the software/driver to install properly so that Windows Vista can detect the card and install the driver and software?

  If not, does anyone know of a driver updated for VISTA BETA2?

  I would really like to keep Vista Beta2 on my L10 so if anyone has some tips that will get my built-in wireless card works, I would be very grateful. (BTW, I don't have a 'wired LAN').

  Concerning

  Hello

  These days, a lot of users wrote vista and their experiences with the installation. As you know that officially there are no drivers available. I think that Toshiba will offer all the drivers at the point where vista is officially on the market.

  You can post on this tread http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=13771 maybe Brave will give you more information about the installation on its L10.

• Wireless LAN

  I have a HP P6640f desktop with ralink 802.11n wireless LAN card.  Since I'm in the office, the intensity of the signal was low compared to other units (for example, HP laptop).  Recently, the intensity of the signal has dropped and speed, which never exceeded tb Mb, dropped as low as 11 t.  I just drop a new router, but it has not solved the problem.  I installed a usb wifi adapter and I can get speeds up to 150 MB and download speeds jumped 50 10 MB with the installed adapter to nearly 20 MB with the usb adapter.  I tried to reinstall the network card, but no luck.  Any ideas how should I proceed?

  Hello again @P1006User,

  I suggest you use the HP support document: using Microsoft System Configuration (Windows 7) through your startup items and eliminate any that reference your old card WiFi. If you don't know one that might disable all and start the reactivation of their groups until you identify the most appropriate.

  I hope that I have answered your question to your satisfaction. Thanks for posting on the HP Forums. Have a great day!

• Satellite U940 - update Realtek Wireless LAN Driver

  I just upgraded my Satellite U940 PSU6VA - 00S 002 Windows 8 to 8.1 of Windows and am currently following the instructions of the upgrade from here. I noticed that European and Australian Toshiba sites include a 'Realtek Wireless LAN Driver' in their list of downloads driver for Windows 8.1 for the Satellite U940:
  - European page
  -[http://support.toshiba-tie.co.jp/windows81/drivers/PSU6V_Up_au.htm]

  However, I have never noticed any a Realtek wireless LAN driver on my computer, before even that I have upgraded to Windows 8.1. I've only seen in Device Manager network cards:
  -Intel Centrino Wireless-N 2200
  -Realtek PCIe FE Family Controller (which I believe is a wired LAN driver, not a LAN wireless driver).

  So my question is: do I have to download the Realtek wireless network driver or is it not suitable for my system?

  > So my question is: do I have to download the Realtek wireless network driver or is it not suitable for my system?

  Your laptop was equipped with Intel wireless network adapter and NOT card Realtek WLan and therefore the Realtek WLan driver does not need to be installed.
  You should consider a fact: there are different laptops on the market models that are equipped with different material parts. Some support the Realtek WLan card and some models were equipped with modules WLan Intel and that's why you can find some drivers (like Realtek Bluetooth Driver Package Filter) in the driver from the list of downloads that are not essential for all models.

• Satellite Pro M40X-132: scalable wireless Lan?

  Hello

  I have a PC laptop Toshiba M40X-132. It doesn't have a wireless installed inside the adapter. It cable antenna for this card.

  On the site where the specifications are listed, I see that the computer is "scalable wireless lan. If you want to check, here is the link: http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/selected_product_option.jsp?service=EU&PRODUCT_ID= 104069 & DISC_MODEL = 0

  I opened my computer and noticed that there are no slot mini pci installed. However, I found the place on the motherboard that is generally used to install such a slot with a certain set of 15-20 minutes with a weld. :) I know I'm losing my warranty by doing this, but I think it would be better to take the risk that, in order to exploit external PCMCIA or USB devices all the time.

  So, I have a slot mini pci I bought in a store for electronic components. The place for the installation of such a location are tinned on the motherboard. I think cleaning of Tin from there and then set the slot I.

  The big question is the following: suppose that I managed to solder correctly such a slot on the motherboard. It will work or not? I mean, the slot is just the thing that does not exist, or there is some other components and electronic parts which are now absent and doing this slot work?

  Thank you for your advice. I'm really confused.

  Good day! :)

  Hello Stefan

  I really put t understand you not at all. First I put t really believe someone make these experiences and you will be very happy if someone has this kind of experience.

  And if it works, how you want to install the WiFi antenna? You want to dismantle the entire screen to do this and to do it properly? Believe me that it is a bad idea.

  The USB wireless costs about 25 euros and in 10 minutes, you can configure and use the WLAN.

  Please think about this one more time.

  Good luck!

• Satellite A210-ST0 - wireless LAN driver does not work

  I recently reformatted my laptop with windows XP, and I have all the drivers working except the wireless Lan driver.
  I got the driver from the toshiba page and this is the XP driver. I install it, but the computer still does not recognize that the map has a pilot (appears as a question mark in the Device Manager) does anyone else have this problem? is there another place to get the driver?

  PS: I'm pretty good with computers, I just need the driver file and can installed with on an EXE file

  Hmm

  What page of the driver Toshiba did you use for the download of the driver?

  As I m not wrong not the * Satellite A210 - ST0 PSAFGC * is a Canadian series and therefore, it would be desirable to use the Canadian page for the download of the driver!

  Check this box:
  http://support.Toshiba.ca/support/download/ln_byModel.asp

  The WLan card chip could come from Realtek or Atheros.

  Last but not least, you should check your BIOS version. If the latest version is available on the Canadian page and then try to update!

  Good luck

• Satellite L300-1AQ - WHAT Wireless Lan Driver should I download?

  Morning everyone,

  Toshiba Tempro has directed me to d/load the latest driver w/less than Lan. I went to that page, but there are PLENTY of drivers so I need to know WHICH one? I have Vista 32 bit. When presented with the list, at the bottom it States * + ' "If you don't know which model Wireless LAN Adapter is found in your laptop computer, please see the"How to identify the model of built-in wireless LAN adapter"of our wireless LAN how-to resources page.»» ' + * Well, I TRIED but still can't find it!

  Someone help me with this please? I googled the question also done everything to nothing is...

  Thank you

  Angel
  XX

  Hello

  Your laptop is Intel 802.11agnMiniCard and the last driver that you can download from http://aps2.toshiba-tro.de/wlan/

• How to check my on Satellite L40 Wireless Lan driver

  Hello

  I just formatted my Toshiba Satellite L402, and I noticed that I don't have an installed wireless local area network.
  My question is; How can I detect my wireless lan driver?

  Hello

  At the bottom of the unit, you will find different labels.
  There is also a WLan card part number.
  Take it, google about this issue and you need to determine which wireless network card has been installed.

  Concerning

• Wireless LAN Card for Windows Server 2003?

  Hello

  I need a fast Gigabit Wireless LAN Card for Windows Server 2003 32-bit Edition can say list the name manufacturer & model of LAN cards.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• problem with express mini pci wireless lan card. I can't connect to internet via wifi but I can connect to the internet via cable.

  Hello! I have a problem with my card express 11 b/g/n wireless lan mini pci because I can't connect to internet via wifi but I can connect to the internet via cable. whenever I try to connect it repeat to myself that there is a problem with your wireless network card. I tried troubleshooting, uninstall and reinstall the program, but always the same result. I'm updating too but still the same thing. I use a windows 7 Professional on my Lenovo 412. can someone help me? Thank you!

  Hello

  Method 1: I suggest you to follow the instructions of the link to solve the problem of network card:

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems

  Method 2: Troubleshoot wired and wireless in Windows network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Reference: http://forums.lenovo.com/t5/R-and-L-Series-ThinkPad-Laptops/L412-Wireless-Automatically-Disables/td-p/264447

  You can also post your question in the forum of Lenovo to get help:

  http://forums.Lenovo.com/

• Error problem USB wireless adapter "Wireless LAN adapt Wireless Network Connection 4:

  Hello

  I can't access the internet via a USB on my desktop PC wireless adapter. In fact, I received the following message:
  Wireless Network Connection 4 Wireless LAN adapter:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Double Belkin N + Wireless USB adapt
  Physical address.... : E8-5B-5B-49-DD-CD
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Please help me solve the problem.

  tanks

  Hello

  Welcome to the Microsoft community. I will certainly help you with the problem you are experiencing.

  I would like to ask you some questions, in order to better understand the issue.

  1. What is the exact model of the Belkin USB adapter?

  2. What is the brand and model of your computer?

  3. When was the last time it was working fine?

  4. Remember to proceed with software or hardware changes recently?

  This problem may occur if there is a conflict with a third-party software or due to an outdated driver, to diagnose this issue further and solve the problem, try the following methods.

  Method 1: Run the network troubleshooter

  I suggest you to run the network troubleshooter utility. It will automatically detect and solve the common problems that can cause problems with the network. To run this utility, you can follow the article below:

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2: Network Wi - Fi problems and

  Follow the Microsoft article on wireless and wired network problems. Click on the link below:

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this information was useful. Do not respond with answers, because it will help us to find and provide you with a better resolution.

  Thank you

• How netflix strem by using blue-ray (ready for wireless lan) BD-P1600A/XAA samsung to my TV player?

  want help to learn how to stream Netflix to my Blu - ray player from samsung on my TV.  My blue-ray player is instant streaming available (wireless LAN ready) Samsung BD-P1600A/XAA. I also bought an adapter = Samsung model # WIS09ABGN. No matter what I do TV shows a message indicating an internet connection could not be found.  Help, please! Thank you, SEM.

  This does not appear to be linked to a network of Windows 7 problem, because it is not
  even a computer involved. Try http://forums.cnet.com/samsung-forum/ of support
  on interoperability and Samsung devices.
   
   
  Barb
   
   
  http://digitalmediaphile.com/
   
  Application Windows 8 Blog Reader of Barb connected world - http://apps.microsoft.com/windows/en-us/app/barbs-connected-world-blog/02f35769-52bf-461c-b1d5-06e54a58d298
   
  Please mark as answer if that answers your question