Question on export in 4K vs 1080 p

Similar Questions

• BEFORE El 13: What codec to export images GoPro 1080 50 p? Import and editing work wonderful. Export does not codec 1080 50 p. I took 25 1080 p instead. Rendered film seems odd.

  Import and editing work wonderful. Export does not codec 1080 50 p. I took 25 1080 p instead. Rendered film seems odd.

  What codec is better to use for minimum redisplay and play on TV (Europe) or a PC?

  sunsetblind

  What operating system executes your 13 items first?

  Were you aware of the tab button/video advanced for that you select under Presets?

  Here you can customize the preset... If you want 1080 p 50, example

  Publish + share

  Computer

  AVCHD

  with Presets = MP4 - H.264, 1920 x 1080 p 25

  then, under the advanced settings of this preset button/video tab, customize 1080p50.

  Do not hesitate if you have any questions or need any clarification. We need to examine the full

  Details of your project (import, edit, export) If you see irregularities beyond not being able to

  NEC 1080p50.

  Thank you.

  RTA

• I've updated to 2015.2 in September and started having problems with freezing while working on the photos. I upgraded my memory from 4 GB to 8 GB and it has disappeared (in most cases); However, I always feel a lot of questions of export of JPEGs (gel) bu

  I've updated to 2015.2 in September and started having problems with freezing while working on the photos. I upgraded my memory from 4 GB to 8 GB and it has disappeared (in most cases); However, I always feel a lot of questions of export of JPEGs (gel) but not tif files? Very frustrating. Tried to install the new updates but my creative cloud is just a blank page?

  Hello

  I think you are referring to the white empty window of CC desktop application.

  Please refer to the threads below where this issue has been addressed:

  Creative cloud is empty window why?

  Cloud Desktop App is empty?

  New application Cloud Creative unusable: it is empty!

  Re: Empty opening creative cloud app

  Kind regards

  Sheena

• Export the settings of 1080 p .mov file?

  I just spent from Mac to PC after 8 years on a Mac, so I do the Final Cut/compressor move to first/Media Encoder. I am a videographer wedding, and for each sequence, I provide a copy of DVD (.m2v) and give the couple a high definition thus .mov file. .M2v encoding was easy. However, I'm not having any luck with the HD files. I'll post the settings just below, but my basic question is, why was it the output file 23 concerts? I'm used to it being within the range of 2 gig, to where I can burn a data DVD.

  PS - I just noticed that in the quicktime export settings, the print format was 1920 x 1280, instead of 1440 x 1080 (source size). That would explain the major difference in the size of the file? I'm an export now is 1440 x 1080, but it will take a while...

  Here are the parameters of HDV 1080i video (60) origin:

  

  
  Here are the parameters of the sequence:

  

  Here are the settings for quicktime:

  

  Sorry - should have clarified - edition codec did not matter. I meant the codec you use export - but you have answered anyway.

  The main determinant of the size of the encoded file is the bitrate; If you look at the original of your code using QT Player Inspector, you should be able to determine the transmission speed of this file. Then, you must replicate that in first. With the first QuickTime format, which made using the box rate limit and the field in the main video tab. Basically, you tell the encoder to use anything until this bitrate, as needed. If you do not use this box, the encoder will be empty as number of bits in the encoding as necessary to replicate the original file: this can result in heavy file sizes, you discovered.

  In addition, you will probably want to encode a file at 1920 x 1080 pixels square; the problems aspect ratio unless you have to deal with, better it is, as many software players look at only the raw pixel dimensions and not IRON.

  Final bonus question: you are keen to QuickTime MOV? There is another, perhaps more flexible output formats that you can use...

• New to LabVIEW, just a few questions with export.

  Hello people, I am new to labVIEW program, we have access to the school but we got few learn it on our time, but we had a few questions before you start a project with her.

  We can use it to export a message text and voice on a phone? There are we using or developing another application? (like, IE. Whats App? or "textME")
  Can we integrate code c ++ with the script of labVIEW? (I have not yet read the help section yet and I currently do not have access to my computer at school to play with him)
  Any useful tools for the processing of the signal? I know that biomedical exist, but we were told that because of the changes around my program ciricling its an after the fact at the moment. Apparently, we have the software but not the equipment. (If necessary?)

  Also useful tutorials? I was check on youtube and stuff but still a little fuzzy on some things

  Thank you!

  Wow a lot of questions.  To get started with a free training.

  Training center of NOR

  NEITHER start-up

  -Hardware Basics

  -LabVEW databases

  -DAQ Application tutorials

  Introduction to LabVIEW for 3 hours

  Introduction to LabVIEW for 6 hours
  Paced self-study for students
  Self Paced Training beginner to advanced, required SSP
  LabVIEW training Wiki

  Do not forget that many people make a career of LabVIEW Development.  They spend 8 hours a day, 5 days a week, for 20 years to develop, and they still don't know everything.  But don't get too discouraged because developers not great like these lair on these forums and are happy to help you.

  LabVIEW is a complete, true programming language.  Read and write text files are easy enough to do.  The range of the file IO has a reading and writing spreadsheet file works in many simple cases.  LabVIEW comes with numerous examples, launch it by clicking Help > example Finder.  You want to use a tool third 3rd for send SMS and voice mails.  An easier method to send SMS messages is to send an email to the carrier.  LabVIEW has a few examples on the email and there are a few on the search for a few forums.  LabVIEW can call several other languages, and built DLL easily, here again there are examples in this topic, or search the Web.

• Question of export OBIEE

  Hello everyone,

  I have a question about the export of obiee analysis. I have a dashboard page and a column analysis data format is 'DELETE '. However, users want to see repeated for these cells when they export excellent file. Is there a way to do this? While he is seen deleted on dashboard, it will be exported repeated format in excel.

  Kind regards

  Dilek

  Hi Dilek,

  We were faced with the same problem and could solve it with the following steps (change your insatnceconfig):

  • "second line should look similar to the following: http://www.w3.org/2001/XMLSchema-instance ' xmlns="oracle.bi.presentation.services/config/v1.1 ">
  • Add at the end (before the closing of ServerInstance tag) following:
    • 
      
      true
      
      

  When you have completed these steps, restart your PS (EM or with opmnctl) and check if it works.

  Best regards

  Pie

• Question to export PDF from Indesign book Blurb - color change

  Hello

  This is my first post on the Adobe forum.

  I have a problem when you export a PDF file that is intended to be printed for a book Blurb. The Preview on the site blurb is very different from my PDF in terms of colors.

  This is my workflow:

  -All my photos are converted to CMYK blurb (via photoshop) color profile and saved as TIFF.

  -J' I put all my pictures on my layout in Indesign CS6 (which also has the color of the text of presentation profile)

  - Then I set the PDF export preset that Blurb has provided (the profile description [based on 'Blurb PDF X - 3 Export Preset'] [based on ' [PDF / X-3: 2002]'] use these parameters to create Adobe PDF documents that should be verified or must conform to PDF / X-3: 2002, an ISO standard for graphic content exchange.)  For more information on the creation of PDF/X-3 compliant PDF documents, please visit the Acrobat User Guide.  Created PDF documents can be opened with Acrobat and Adobe Reader 4.0 and later.]

  -C' is where the problem begins: if I read the PDF with Adobe reader, it seems very well (i.e. I see on my screen of Indesign) SEE IMAGE 1. But if I look at the preview of the PDF on the Blurb Book Preview module it looks like really bad (see IMAGE 2).

  So my question is:

  What might explain my PDF looks so different from the preview Blurb and what step should I take to fix this problem?

  Blurb people have no idea so I hope that the Adobe community can help me!

  Thank you in advance!

  Vincent

  IMAGE 1: as seen on PDF when read with Adobe reader

  

  IMAGE 2: as seen on the text of presentation preview module.

  

  I recommend that place your images in InDesign as sRGB (you need to go back to the original images, not those who are already converted to CMYK). When you have finalized your document InDesign export presets PDF Acrobat, by selecting the text of presentation PDF presets (that you have installed). You can view the PDF result using Acrobat on your own (probably calibrated monitor).

• How to export as .mov with 1080 p?

  Hello

  I tried to export in format .mov, but I can't find a 25 fps at 1080 p preset. In the list of presets for .mov, it has only a selection of 1080i.

  However, when I changed the export in mpeg2 format, there are 25 fps at 1080 p preset.

  So does that mean when I want to export at 1080 p at 25 fps, I cannot export as .mov but must use mpeg2?

  Thank you

  In the list of presets for .mov, it has only a selection of 1080i.

  Use the QT one and change the order of fields in progressive

• Export of 720 to 1080

  Hello. I would like to export a 720 p with component Y' Y'CbCr 8 bit 4:2:2 codec as a 1080 prores Quicktime. What are the best settings for export? Can I use max rendering quality?

  If you do this, do it once.  Use the high detail of preservation of After Effects range feature to put the necessary wide 2 k resolution.

• Avid DNxHD Won´t allow the export of 1920 x 1080

  Hello

  I need to export to Avid DNxHD format. The material has been edited directly from DSLR filmed in 1080 p, 24 (23 976) fps. In the export settings, I select "Quicktime" for "Format" and "Video Codec", the "Avid DNxHD codec". Opening the box 'Codec Settings' I have a whole bunch of preset options. When I select an option that fits my original sequences (1080 p, or 24 fps, or 23 976) and click on 'OK', the output format will be only 720 x 480. In fact, a preset 1080 will be released in 720 x 480.

  How to export at 1080 p?

  Also:

  1. the dialog box for the Avid codec doesn´t show all specs is cuts around the section "xx - bit". The won´t of the box allow expansion. Is - fixable?

  2. what should I choose for levels of colors, "RGB" or "709" (that means "709" stand for?)?

  Thank you very much.

  3770 K I7

  ASUS P8Z77-V Deluxe

  MSI GTX Geforce 660TI Power Edition

  GSkill DDR3 1600 - 8 MB x 2

  Windows 7 Home Premium

  

  Check the blurred messages in this thread for

  everything you need to know about export DNxHD:

  DNxHD make it dark

  http://forums.Adobe.com/message/5331048#5331048

• Export the sequence from 1080/24 to the .mov in 1080/24... ?

  New to the forum. I imported images XDCAM turned to 1080 p/24 fps and now ready to export my movie-media-about project a .mov file format in the same frame of 1080/24. I choose the mov file format in the drop-down list, but Adobe automatically sets the resolution of 720 p/24 fps. I click around - I see the "match sequence settings" box and click on it - it changes to file with a .mpeg extension (do not know if it is the mpeg2 or what).

  The problem arises from this exported mpeg file not to be seen or heard by a user of Mac/FCP, the video appears as a white screen with no audio.

  What Miss me?

  Thank you

  Lost in export

  You probably don't want to do use DVCPROHD, and CERTAINLY, you do not want to use the QuickTime Video codec - that will easily turn your video to porridge. In addition, ignore the Match sequence settings box; It is worthless.

  How long is the piece you are exporting? If it's short-ish, you could probably get out with the help of None (which is uncompressed) as your video codec. The file will be large and directly proportional to the length of your movie. Is your source 1440 x 1080 or 1920 x 1080 footage? Set your image size of must appropriately to match that and then set the format of the pixels correctly. 1920 x 1080, you'll use square pixels. for 1440 x 1080, you'll use 1.333 anamorphic HD. Set your framerate to 23.976.

  If the file is too large, you might want to check the Avid DNxHD codec; It is cross-platform, if you happen to be under Windows.

• 2 questions: when exporting black and highlighted menu items

  Newbie here, I'm going with some basic knowledge of learning.

  Mac OS x 5.8

  InD CS 4

  Well, you have two questions.  My books are not their answer, my live-help person is busy (professional InD)... I come here to help.

  1 seems as tho when I draw a line of 10pt black, after the export to PDF, it is planned.  I have changed no settings and if something has changed... I am naïve.  No slides, an opacity of 100%, 100% black. If I print directly from .indd, black.  Certainly screened during the printing of the PDF, and my printing company is the only one who noticed.

  2. while I was messing around not try to understand the black line, all of a sudden, a lot of my drop-down menus becomes marked.  Again, I am naïve.

  Thanks a lot to put up with a novice.

  job1970

  With the visible preview window, move it from the road, then click inside the main window of PDF and move the mouse over a black area. Read probably less than 100% along the edge, it should say 100% that you get in the center of the area.

• question about exporting

  Hello
  It would be better if I start with what I did and then I'll say what I want. I use v 11.1.1.1.1
  
  Develpoment approx.
  
  1A a creator/dimension application named DevUserEditor.
  2. He has created a DevAppapplication.
  3. has taken his backup dump.
  4A the backup of all users/groups/roles using importexport utility that created export.xml.
  5A all reports or financial reporting backup using LCM utility.
  
  Production env.
  
  6 created a user ProdUser , who is creator/dimension application Editor.
  7. He created an empty application ProdApp. (Here I use another application named)
  8 has taken the SID USER_ID = 50001.
  9A dropped the schema and recreated, and exported the dump file.
  10 replace the SID for USER_ID = 50001.
  11 made a change to the export.xml file. I found it was Application Name = DevApp. I replaced it with ProdApp.
  12. all the users/groups/roles importexportutility has exported.
  
  After that, I was able to open the application. But some other users other than the ProdUser received some * 'Sync with Provisioning... '. "* error message. It was rectified as soon as I ran Updateusers.cmd.
  
  Now my question is - is it good to create a new application in prod? I used another named application. And it is appropriate to change the export.xml file?
  
  And what I do with the backup of the financial reports? I tried to import the files using LCM, but I was not finished. I guess these LCM xml/csv files have the name of the DevAppapplication. I'm confused where do I replace the name of the application with the new name of the application is ProdApp?
  
  Any help?
  
  Thank you.

  Hello

  If this is the same app on dev and prod so it is advisable to use the same name, it makes the migration of a much simpler set. In theory, you should should not call an app dev when turned on dev because everyone knows they are logging in the dev environment, even for production. My advice would be to stick to the same name for an application, then you will not have to change as well.

  If you are creating applications to planning with the default admin account that is created in shared services then you will also have a much easier time, it's because the SID does not change between environments.

  It is perfectly acceptable to edit xml files if you need to change to say an application name, it becomes more difficult with financial reports that there is some files associated with an export of lcm, once more, if the name of the application is preserved even it will be much easier.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Question-> DBMS_DATAPUMP - EXPORT, TRANSPORTABLE

  Hi all
  
  OS: BSG 64
  Database: 10.2.0.4
  
  For two days, I fight with my problem.
  The problem is that I tried to export trasportable using DBMS_DATAPUMP.
  
  When I use DBMS_DATAPUMP in my journal, I see
  #################################################
  Start "DBA_GRP". "" EXP_JOB11 ":
  Processing object type TRANSPORTABLE_EXPORT/POST_INSTANCE/PLUGTS_BLK
  Table main "DBA_GRP." "' EXP_JOB11 ' properly load/unloaded
  #############################################
  
  When I use
  expdp DIRECTORY of DUMPFILE = tablespacename200812_alex.dmp dba_grp/pasw_grp@TST = trans_dir TRANSPORT_TABLESPACES = tablespacename200812
  I see in the log file
  #########################################################
  Processing object type TRANSPORTABLE_EXPORT/PLUGTS_BLK
  Object type TRANSPORTABLE_EXPORT/treatment TABLE
  Processing object type TRANSPORTABLE_EXPORT/POST_INSTANCE/PLUGTS_BLK
  ######################################################
  
  Because lack of DBMS_DATAPUMP
  Object type TRANSPORTABLE_EXPORT/PLUGTS_BLK of treatment and
  Object type TRANSPORTABLE_EXPORT/treatment TABLE
  I'm not able to import the tablespace transportabe back to the database.
  
  I googled to ask tom, oracle and many other web sites, forum, but could not solve my problem.
  Could you please have a look at my code?
  I think the question is in steps: STEP 4 or STEP 4-1, but I'm not sure. Can I missing another setting or more.
  
  Thank you very much for your help in advance!
  
  
  BEGIN
  v_dp_num: = DBMS_DATAPUMP. OPEN ("EXPORT", "PORTABLE", NULL, 'EXP_JOB11');
  Dbms_output.put_line (' STEP 1: handful of employment is ' | v_dp_num);
  DBMS_DATAPUMP.add_file (manage = > v_dp_num,)
  filename = > rec.tablespace_name | ". metadata.log",
  DIRECTORY = > "TAB_PART_ARCH"
  filetype = > DBMS_DATAPUMP.ku$ _file_type_log_file
  );
  Dbms_output.put_line ('done STEP 2');
  DBMS_DATAPUMP.add_file (manage = > v_dp_num,)
  filename = > rec.tablespace_name | ". metadata.dmp",
  DIRECTORY = > "TAB_PART_ARCH"
  filetype = > DBMS_DATAPUMP.ku$ _file_type_dump_file
  );
  Dbms_output.put_line ('done STEP 3');
  DBMS_DATAPUMP.set_parameter (manage = > v_dp_num,)
  name = > 'TTS_FULL_CHECK ',.
  value = > 1
  );
  Dbms_output.put_line ('done STEP 4');
  DBMS_DATAPUMP.metadata_filter (manage = > v_dp_num,)
  Name = > 'TABLESPACE_EXPR ',.
  value = > ' IN ("% tablespacename200812 %'')).
  );
  Dbms_output.put_line ("' STEP 4-1 is completed");
  DBMS_DATAPUMP.metadata_filter (manage = > v_dp_num,)
  Name = > 'TABLESPACE_LIST ',.
  value = > "'tablespacename200812"'
  );
  Dbms_output.put_line ('STEP 5 does');
  DBMS_DATAPUMP. START_JOB (v_dp_num);
  EXCEPTION
  WHILE OTHERS
  THEN
  v_sqlerrm: = SQLERRM;
  
  sp_log ("METADATA FILE CREATION FAILURE for ' | ') Rec.tablespace_name | "Reason: ' | '. v_sqlerrm);
  
  DBMS_DATAPUMP.stop_job (v_dp_num);
  END;

  Hello

  This line

  Object type TRANSPORTABLE_EXPORT/treatment TABLE

  is absent when the datapump is not all tables in the specified tablespace. You can check it using this query:

  Select the table table_name from dba_tables where nom_tablespace in "YOUR_TABLESPACE_NAME";

  I'll guess that you get no back line.

  Here is a update .sql script that works very well. At the beginning, I let fall and then create a tablespace and table. If you have a table called this or a tablespace and you run this script, it will drop these 2 out of objects.

  -test_api.sql

  set echo on

  Drop tablespace including contents test;
  create tablespace datafile 'test.f' size 10 m test re-use;
  create table scott.test_table (a number) tablespace test;
  insert into scott.test_table values (1);
  commit;
  alter tablespace read-only test;

  declare

  number of v_dp_num;
  v_sqlerrm VARCHAR2 (4000);

  BEGIN
  v_dp_num: = DBMS_DATAPUMP. OPEN ("EXPORT", "PORTABLE", NULL, 'EXP_JOB25');
  DBMS_DATAPUMP.add_file (handle-online v_dp_num,
  name of file-online "metadata.log."
  DIRECTORY-ONLINE "DPUMP_DIR."
  type of file-online DBMS_DATAPUMP.ku$ _file_type_log_file
  );
  DBMS_DATAPUMP.add_file (handle-online v_dp_num,
  name of file-online "metadata.dmp."
  DIRECTORY-ONLINE "DPUMP_DIR."
  type of file-online DBMS_DATAPUMP.ku$ _file_type_dump_file
  );
  DBMS_DATAPUMP.set_parameter (handle-online v_dp_num,
  name-online "TTS_FULL_CHECK."
  value-online 1
  );
  DBMS_DATAPUMP.metadata_filter (handle-online v_dp_num,
  Name-online "TABLESPACE_EXPR."
  value-online 'IN ('TEST') '.
  );

  DBMS_DATAPUMP. START_JOB (v_dp_num);
  EXCEPTION
  WHILE OTHERS
  THEN
  v_sqlerrm: = SQLERRM;

  DBMS_DATAPUMP.stop_job (v_dp_num);
  END;
  /

  -output metadata.log

  Departure 'SYS '. "" EXP_JOB25 ":
  Processing object type TRANSPORTABLE_EXPORT/PLUGTS_BLK
  Object type TRANSPORTABLE_EXPORT/treatment TABLE
  Processing object type TRANSPORTABLE_EXPORT/POST_INSTANCE/PLUGTS_BLK
  Table main 'SYS '. "' EXP_JOB25 ' properly load/unloaded
  ******************************************************************************
  Empty the files together for SYS. EXP_JOB25 is:
  /ADE/dgagne_l6/Oracle/work/metadata.dmp
  ******************************************************************************
  Required for the TEST transportable tablespace data files:
  /ADE/dgagne_l6/Oracle/DBs/test.f
  Job 'SYS '. "" EXP_JOB25 "carried out at 16:35:10

  Please let me know if you managed to get your tables in the dumpfile.

  Object type TRANSPORTABLE_EXPORT/treatment TABLE

  Thank you

  Dean

• Question about exporting data from Virtualbench.

  Hello

  I am new to the forums and VirtualBench and hoped that someone might be able to help.

  When I export data from the VirtualBench, I get 4 columns of data for the 2 channels. They are "1 Min", "1Max", "2 Min", "2Max.

  Example:

  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  

  Timestamps (ns)	1 min	1 Max	2 min	Max 2
  -3000600000	-0.205761317	0.12345679	-0.013168724	-0.001646091
  -2990598000	-0.205761317	0.12345679	-0.013168724	-0.003292181
  -2980596000	-0.205761317	0.12345679	-0.013168724	-0.003292181
  -2970594000	-0.205761317	0.12345679	-0.013168724	-0.001646091

  I don't understand what means min/max. I have not any spread. VirtualBench takes in fact several samples at each point?

  Thank you.

  In some places, VirtualBench application will automatically the peak of detection equipment.

  Peak - detect mode, over-samples scope and returns the minutes and the maximum voltage in each period the sample.

  You can manually control the sample mode by going to the settings of acquisition: