Question on size USB for upgrade to blu - ray player

Similar Questions

• Satellite L670 - upgrade to Blu - ray player

  Hello

  I have a Toshiba Satellite L670 and I was wondering if I could change the DVD player and put a Blu - Ray player.
  This can be done?

  Hi evilgr,

  Theoretically, it should be no problem to upgrade to a Blu - ray player. Another Satellite L670 models when equipped with such propulsion, so theoretically there s no problem.

  The best contact you are a service provider authorized in your country. Guys can tell you which drive is compatible and order it for you. Not all readers are compatible for all laptops, so it is important that you purchase a compatible player.

  Please contact an authorized service provider. Guys can order such a unit.

• Question about upgrading to Blu - ray on the S70 Satellite-

  I only discovered how easy it is to remove the current DVD on my Satellite S70 writer-(10 seconds) so no problem.

  I see that there is a little paw on the back of the writer that allows the writer to be locked in place by the small screw that holds the cover of the HARD/Ramdisk in place

  Can I buy a Blu Ray player that has this already mounted pod or I can fit the leg later?

  Can someone suggest a Blu Ray player adapted to buy as a direct replacement.

  Most of the laptops S70 - A is available with optical drives DVD-multi. Only few of them are provided with 9.5 MM BD - ROM unfortunately, I don't know what model of BD - ROM is exactly.
  It is not easy to find information which model can be used on your machine.

  I'm not 100% sure but it might be UJ162 UJ-162.

  Let's see if someone else can find exact information on this subject.

  In any case, in the worst case, you can order it and test it. If there is a problem simply return.

• Blu - ray player for lenovo x61s

  Hi I'm new to the forum of lenovo, I am looking if someone can help me my question is can I get a blue ray player or a blue ray for my lenovo x61s burner and if so someone can direct me correct one that would suit my model thank you...

  don't think that you can get in the ultrabay slim pata format housing. You will need to get an external blu - ray drive usb if you want to support blu - ray.

• Not Surround sound more on Blu - ray player after upgrade by MediaSmart

  When I used the Blu - ray player in my home theater, I selected the mode "HDMI pass" to get a sound surround. I came across a few new films that would not play and after the update from HP, the player would simply freeze as soon as there is audio present. I had to go to the Task Manager to close it.

  MediaSmart works fine on the laptop, but it only freezes when I use the parameter "pass through HDMI.

  I tried mode "HDMI pcm" and who does not work either. This Denon receiver there are five channels work but I get stereo sound on front speakers left and right. This seems to indicate that the Blu - ray player is not released in 5.1 surround sound and the laptop and the Denon receiver works fine.

  Supports the HP solution was to reinstall the older driver or try a system restore. I know that a system restore won't do anything. The problem is in the new software. The new software does not work on my HDX18 when he was under Vista, it did not work when I upgraded to Windows 7 and it does not work on my new dv8.

  I tried to contact CyberLink to let them know that the upgrade is giving problems, but I think they ignore me.

  Personally, I think that HP or Cyberlink just forgot to add the drivers for a 5.1 and 7.1 surround sound.

  If anyone find a solution to this one that I wouldn't be surprised. I'm quite sure I've covered all the possibilities, but you never know.

  Any help would be appreciated.

  Thank you

  HP had me download a software called K-Lite which is a software codec repairs and replacement. After the upgrade of the software more returned to get my blu - ray movies to work, I ran K-Lite and that did the trick.

  http://www.codecguide.com/download_kl.htm

  I used the mega version, but you can probably use the standard.

  It is a software complex with many choices and I changed it to accept a sound audio surround and DTS 7.1. There were several boxes prompting me to remove the broken codec which continued for some time and when it was all thanks to I was surprised that it worked.

  Meanwhile CyberLink itself actually got back to me and I was given some temporary free software provide I run their diagnostic tool for them on my dv8 for helping them understand my problem. It is still pending.

• Download free blu ray player for windows 8

  I've recently updated to Windows 8 and when I tried to install the PowerDVD 10 supplied with my Bluray player it installed fine but when I tried to play a Bluray it says something about the integrity of the disk or software or something. It is so why I am looking for new software. I tried to look online and most are pay for use as a Blu - ray player from UFUSoft or never heard of so I don't know if I can trust them.

  On Tuesday, June 3, 2014 04:46:58 + 0000, AkerloganWhit wrote:
   
  | When I tried to play a Bluray it says something about the integrity of the player or
  Software or something.
   
   
   http://www.CyberLink.com/stat/window8-updates-Center/ENU/index.jsp there may be
  a compatibility made available so that you can use PowerDVD.
   
   
   
  __________________________________________________________________________________________________
  Barb
   
  MVP Windows Entertainment and connected home
   
  My Blog - http://digitalmediaphile.com/
   
  Connected world Blog Reader Windows 8 App Barb-
  http://apps.Microsoft.com/Windows/en-us/app/barbs-connected-world-blog/02f35769-52bf-461C-b1d5-06e54a58d298
   
   
  Windows and Surface drive Windows 8 App community
  http://apps.Microsoft.com/Windows/en-us/app/Windows-and-surface-community/0abb150e-D287-47d4-837E-9fa51f485ad7
   
   
   
  Please mark as answer if that answers your question
   
   
   

• Satellite Pro P300 best exit way to get audio for blu - ray player or projector

  Hello

  Would be great if someone has experience on the following points.

  I have a Satellite Pro P300 - PSPCDA 03 P00D: I would like to know the best option for high-quality audio from this unit to a blu - ray player or an optoma projector. (Or a good way to find the answer)

  The blu - ray player has hdmi (the satellite does not work) and the optoma projector has a 3.5 mm mini-plug.

  The satellite has a sound piece dolby - is it possible to get a feed for audio output dolby?

  Any thought / experience welcome.

  Thanks in advance!

  Hello

  Not sure but I think that the headphone socket supports S/PDIF
  I think you should check the user manual for more information on S/PDIF
  If his support, then you can use it to get the best audio quality

  Also found this doc in the knowledge base of Toshiba
  http://APS2.toshiba-tro.de/KB0/TSB5400YZ0005R01.htm

• I'm unable to get the registration code for my Blu - Ray player

  I'm unable to get the registration code for my Blu - Ray player. I followed the instructions and all I get is the statement: device is registered. I can't register for the most part without a valid code. Please let me know how I can get the correct code. Thank you

  If you were able to enter the registration code the first time you tried to save the player before then you don't need to do it again. Just bought this drive? If so, was it a screen or mixed open-box model?

• Listen to music from iPhone for cinema house Blu-ray (BDV-N790W

  Is there a way to stream music from an iphone (without being connected to the docking station) for the blu - ray player? I like to play music in itunes on my iphone via the wireless from my phone home theater system. I downloaded the app, but I do not see a feature that will have access to the music on the iphone.

  Thank you for your post and welcome to the forums.

  If you have downloaded media: connect, then the iPod should see the report devices(BDV-N790W) that are on the network since the iPod is the DLNA server. Make sure that the iPod and BDV-N790W are connected to the home network. Check to see if the DLNA server is shown in the Player configuration options by going to SETTINGS > NETWORK SETTINGS > SERVER CONNECTION SETTINGS. Also, check that the converter is able to show as available on servers DLNA by going to SETTINGS > NETWORK SETTINGS > RENDERING and CONTROL of ACCESS RENDERER OPTIONS. If you can not always connect to the player, then check the firewall of the router settings. If you don't know how to configure the firewall on the router, then contact the manufacturer of the router for further assistance.

• Reinstall the Toshiba Qosmio F750 for 3D Blu - ray player

  Dear team of Support from Toshiba,

  I have installed the Toshiba Video Player 'new' v4.00.6.09 in the download section for F750. After that, the 'old' Toshiba 3D Blu - ray player crashes as soon as I started it. As the new installed 'Toshiba Video Player v4.00.6.09 f' does not support Bluray 3D disks and has been dated to 2010, I uninstalled it. But the Toshiba 3D Blu - ray player broke again. So I decided to uninstall and reinstall the 'old' "Toshiba 3D Bluray player. Uninstallation of was no problem, but is not possible to reinstall, because the download for Toshiba player Blu - ray 3D download section official Toshiba 'Toshiba Bluray 3d Player V.1.0.1.299' is only one file to update that needs an older version installed of the Toshiba Bluray 3d player.

  Dear Supprot team, where / how, please, can I get the Installer * 'full installation' files for the Toshiba the F750 3d Bluray player? (A complete DVD system recovery and reinstallment of just for this player would not be a good option, especially my family and I would like).
  Thank you very much for your help,
  Best regards
  Wolferich

  Hi guys

  Recommend to check this thread on the same topic:
  http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?MessageID=262441

  Welcome them

• Re: Satellite L755 - Blu - ray player is not picked up after Win 8 upgrade

  I have a Satellite L755-s1ep and I upgraded to Win8 and my blu - ray player does not work and I can't find drivers or a solution.

  What do you mean by not working?
  Is the drive recognized in Device Manager and listed in Windows Explorer?

• Can satellite P200-1EE - I get a Blu - Ray player for her?

  Finally, Toshiba have joined the BDA!
  We know if or when they will release a Blu - Ray player to replace the HD-DVD drives in a P200-1EE?

  I know that this post may be a bit premature, but I felt betrayed, since the purchase of the laptop and Toshiba format let down HD-DVD 3 weeks later.

  Hello!

  I put t know when Toshiba will release a Bluray you can buy to swap it with your HD-DVD player.

  But maybe a car from a different manufacture will work also on your laptop. In your case I go to the computer store nearest and ask for such propulsion. Perhaps you can test it in the shop if it works because not all readers are compatible with all portable (assignment of pins e. g.).

  Good luck!

• Connecting Samsung Blu - Ray player for DELL with Windows Vista computer

  My new Samsung BD-P3600 Blu - Ray player does not recognize my name/password user to allow me to share office files in my shared Documents.

  If anyone has had this problem, how you didn't solved the problem?  Samsung was sent to DELL, DELL has no answers.

  Thank you

  E-mail address is removed from the privacy *.

  Hi CWG13,

  Thank you for writing to Microsoft answers Community Forums.

  This can happen if there is a problem with some settings or folder permissions in the Blu - Ray player that could do this. It could also be the security program blocking the part.

  A few things you can try creates a separate on the desktop folder, rather than to use the documents shared and then try to access it from the drive.

  You can also try to disable your firewall program and security and then try to access to the shared folder.

  Try to disable the user account control and check.

  You may also be able to solve the problem by taking possession of the record.

  To take ownership of a folder

  1 right click on the folder you want to take control and then click Properties.

  2. click on the Security tab, click Advanced, and then click the owner tab.

  3. click on modify.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  4. click on the name of the person you want to give to the property.

  5. If you want this person to be the owner of the files and subfolders in this folder, select the void containers and objects check box Replace owner.

  6. click on OK.

  Let us know if this doesn't work or if you need further assistance.

  Kind regards

  Sharath

  Microsoft Answers Support Engineer

• HP G62 DVD - RW w / LightScribe upgrade to a Blu - Ray player

  Is it possible to update my current DVD - RW with LightScribe to a Blu - Ray Disc with LightScribe drive?  What do I need?  Any help would be appreciated!

  Hello:

  Here is the link to the service manual for your laptop:

  http://bizsupport1.Austin.HP.com/BC/docs/support/SupportManual/c02542455/c02542455.PDF

  Please see Chapter 3, page 3-8 for the available Blu - Ray discs with reference corresponding HP numbers.

  The player you get depends on what color is your laptop.

  Paul

• Satellite A500 - correction required for AVATAR on Blu - Ray?

  I have a satellite A500 and it will not play AVATAR on Blu - Ray. I understand there is a required hotfix.

  Where can I get the patch?

  See you soon
  Richard

  Hi richard70au,

  To be honest I n not know what patch you mean.

  Where did you read this information? Normally, you can play all DVD or Blu - Ray without having to install a patch.

  But don't forget that not all A500 have Blu - Ray player. Do you have a?