question on the numbers of the UUID on data warehouses

I have a couple of hosts in different groups. Clusters share some data warehouses, but have a few stores unique data that is clean. This means that some common data stores have different UUID across clusters. What happens if you cold migrate or vmotion virtual machine through the clusters. different UUID numbers cause problems?

Article KB (1006052) said about this problem and according to the instructions this vmotion will fail and he described in detail the resolutions.

Adding a host by these four different methods produced four different UUID:

host name
nomhote.nomdomaine
IP.address.of.host
HOST vs hostname name

Hope this gives advice.

Tags: VMware

Similar Questions

A few questions about the use of data and Cliq

I have the cliq, however I chose to not get 3G (so I bought full fare). So I have a few questions about the phone and the use of 3G / 2 G/Edge:

1 - is possible to disable completely the 2G / 3 G/Edge? I know you can switch between them, but are anyway just tell the phone to stop using them altogether since I'm not subbed to the service?

2. when the update takes place, I guess we'll have to reconnect motoblur and etc, but if I don't have 3 G will I have motoblur connection problems after the update? Or he keeps the latest wifi settings so that it would connect to wifi to connect. When I first got my phone it was not a problem b/c I had 3G for the first month.

I hope that makes sense, thanks!

To stop all the data, I would like to download an application called APNDroid. He cut them all down. When you log on to blur you have 3G or WIFI doe this without getting a timeout error. During the process of setting up your Blur account, you can press the menu button and set up your wifi to work, this will connect you to Blur and your phone will be connected to the blur. If I were you I would be rethinking to do a data plan since you are really losing out on most of your main features of phones. It's your choice, however.

Question about the reports and data of rollups

We followed in place that I need to create monthly reports. There is a custom agent that collects two key all measures that can be used to define a percentage of system availability. They check essentially two types of errors that may occur together or individually. I have not really used reports in Foglight but has spent a good amount of time to play with them today. The main problem/issue I have at this point is how to deal with the accumulation of data. Our retention policy performs three stacks of separate data in a month, how can you effectively report on these data rolled upward?

Example: one of the agents simply return a 0 if the system is ok and 1 if it finds the error. In the end, we just need to know how many times that 1 has been returned in a month. How would one accomplish? If the sum is for example, 40 for a total of 4 hours is that it means that he met the 40 times error? The frequency of the agent is set to 60 seconds, so that would mean 40 minutes of time error...?

The other control agent returns specific error codes and not a simple binary value. If the above example or the question is trivial I still don't know how to deal with this one...

Most likely, you can use the value of the sum for the metric, just as you might have guessed. Because the value is 0 or 1, the amount will be the total of the values for the time period. There are also a number of samples, which should / could be higher because there might be 0.

A few questions about the design of Data Guard

Hi, I have a few basic questions around design Data Guard
Q1. Looking at the instructions of Oracle for the creation of a logical standby, he recommends first creating a physical standby and then convert waiting logic. However, I thought that a logical standby might have a totally different physical structure of the primary. How can this be the case if a logical standby first starts his life pending physical (where the structure must be the same)?
Q2. It is a normal practice to back up your database before as well - if yes why?
Q3. Can RMAN back up a database of the day before while he is in the State mounted (rather than opening it)?
Q4. What is the point of cascade redo apply rather than just get the primary ship to each standby?
I guess you could try to reduce the latency of node to node if some the day before were quite remote from the primary
Q5. Is it possible to convert a physical logical Standby?
Q6. What number best of Standby, you can have - Oracle suggests 30 but I thought I remember reading somewhere regarding the 11 GR 2, that this limit has now been increased?
Thank you
Jim

Hello again;

"begins each logical waiting first her life on hold physical?"

Its the only way I ever did. I think it is the simple way to do it. By the presence of a physical standby first you have already confirmed the network and most of the settings for Data Guard so that you can focus on only the logic of the standby database configuration.

Chapter 3 of this book, it's easy:

http://www.Visi.com/~mseberg/data_guard/new_dg_book.html

Best regards

mseberg

Question about the management of data Cache OBIEE 10g / 11g.
Hi friends,

I have a question: how we can find the display of data in the report (in the answers or dashboard) if Cache or paintings of DW? y at - there no mechanism for this? I know that normally we can find data in tables of aggregation using file view log. Can you please help on this and I would really appreciate your help.

Cheers!
Srini
Add the suggestions above, to find the query caches

1. use followed - cache_ind_flg O/N indicates whether or not the application has reached the cache.
2 NQQuery.log will show "cache hit" (if not you will see SQL to the physical database)

There is no mechanism to track if it hits the browser cache / cache of presentation server.

I hope this helps...

Helps the management of records in the "VM and Templates view" as well as the view of data warehouses

All,
I have 2 questions.
(1) in the 'view of VM and models', we have organized our virtual center of demand for the two years. However, there are still many persistent VM in the folder root from this point of view. How can I export the virtual machine from this point of view only and exclude the virtual machine already in a subfolder.
For example, I have VM in APP1 and APP2 APP3 records. However, there are still hundreds of virtual machines to the root. When I try to view the virtual machine in the root folder, I get a list of everything, including the virtual machine in APP1 and APP2 APP3 records.
(2) according to the data center, I have hundreds of data stores. How can I make a list of people (about 200) and move them to a folder in this point of view.
For example, I have 100 stores of data that are specific to the exchange environment. I would like to move all of those in an Exchange_LUN folder so that I can set different alarm setpoints.

All your data warehouses and folders have names unqiue, try the following
```
$currentDir = pwd
cd vmstores:
Import-Csv -Path "C:\MyFile.csv" | %{
    $tgtFolder = Get-Folder -Name $_.Folder
    $ds = Get-Datastore -Name $_.Datastore
    $dsMoRef = @($ds.extensiondata.MoRef)
    $tgtFolder.ExtensionData.MoveIntoFolder($dsMoRef)
}
cd $currentDir
```

RMAN duplication and expiration of the directives on the environment of data warehouse
Operating systems: Windows Server 2008
DB: Oracle 11 g 2

Are there guidelines how often one should do a RMAN duplication and assign an expiration on archivelogs for data warehouse environments?
It me appears once a day would be enough for overlapping in a data warehouse environment which is updated nightly. Expiration, I don't expect less than 1 week.
See you soon!
I agree with damorgan

See the links for the best practices below.

http://www.Oracle.com/technetwork/database/features/availability/311394-132335.PDF
https://blogs.Oracle.com/Datawarehousing/entry/data_warehouse_in_archivelog_m

Hope this helps,

Concerning
http://www.oracleracepxert.com
Understand the power of the Oracle RMAN
http://www.oracleracexpert.com/2011/10/understand-power-of-Oracle-RMAN.html
Duplication of data base RAC with RMAN
http://www.oracleracexpert.com/2009/12/duplicate-RAC-database-using-RMAN.html

Re-register the VM and skip the question on the UUID

I am writing a script to reregister several virtual machines on an ESX host, for purposes of Dr. I use the command "vmware-cmd - s register vmfs/volume/vmfslabel/VMName/VMName.vmx.
When I registered the virtual machines on the new host and feed their place, I ask myself the question on if I want to create / keep / always create a new identifier.
I was wondering if there was a way I could script the fact I want to keep the VM UUID so that this issue does not appear when I turn on my failure on virtual machines.
John

Insert:

UUID.action = 'keep '.

or

UUID.action = "crΘer".

inside your VMXs with virtual machines powered off.

Marcelo Soares

VMWare Certified Professional 310

Technical Support Engineer

Chief Executive Officer of the Linux server

Question on the form of data - implicit sharing
Hello

We have a data form that the user can down to the level 0 in the rows to enter data. The question is for some customers when the user tries to enter data at the client level 0 is not save the number of entry but get substituted automatically with the parent value. If the user has entered in the parent customer was filling too the same value for the client to level 0.

When I checked in the outline... I noticed that they are customers who had only one child, and I guess that this happens because of the property on the part of the implicit. I don't know if there could be another reason to do this. If I am wrong please correct me.

Now, I know that if you change the property of the customer parent to share never, it might solve the problem. But the problem here is - there is a lot of these customers. And each month we receive new clients that could belong to the same case. It would be difficult to go and change the property to share ever for all customers and keep track of it manually. It might be a maintenance problem.

So is there any other solutions? We can sort it solve? Please let me know your suggestions or ideas on what you think would be the best way to resolve this problem.

Any ideas are appreciated.

Thank you!
~ Hervé
Hi Gwen,

You can disable the implicit sharing in the Essbase.cfg
When you set the parent members and children store, you create blocks more in the database, so use with discretion.

http://docs.Oracle.com/CD/E17236_01/EPM.1112/esb_tech_ref/impliedshare.html

In addition, if you leave the parent on the form, you should be able to write data to the child.

Kind regards
Robb Salzmann

Questions on the aggregation of data for parents
Hi guys,.

I have two questions.

One, once I have enter data in the leaf level, values aggregate to their parent except period dimension. The aggregation method is elsewhere, conservation never share type and data type is currency. Should provide the member formula to calculate the value for high level members?

Two, some nonleaf members need their own values. For example, a business in the entity dimension unit has some departments. Apart from the consolidation of departments, the BU needs a budget for itself. But members nonleaf cells are read-only. How to deal with my situation?

Thank you
You can't, not in a release from the bottom up. You can allot of bu1_ to his brothers and sisters. Or you can use the version of up and down, to parents of input values and allocate up to nonleaf members.

See you soon,.
Alp

Question about the java.util.Date class.
The book I read said, class Date represents a value int long since January 1, 1970.

I created a class of Date like this

long mesh = 2000L;
d.setTime (st);
System.out.println ("new time is =" + d.toString ());

When the above code, ultimately she prints the date as follows.

New schedule is = Wed Dec 31 16:00:02 PST 1969

No idea why the printed date before 1970? I expect the date to be a value greater than 01, January 1970.
Welcome to the forum!
>
The book I read said, class Date represents a value int long since January 1, 1970.

I created a class of Date like this

long mesh = 2000L;
d.setTime (st);
System.out.println ("new time is =" + d.toString ());

When the above code, ultimately she prints the date as follows.

New schedule is = Wed Dec 31 16:00:02 PST 1969

No idea why the printed date before 1970? I expect the date to be a value greater than 01, January 1970.
>
Because of the way as the setTime method is defined. What time zone do you use?

http://docs.Oracle.com/javase/1.5.0/docs/API/Java/SQL/date.html#SetTime (long)
>
setTime
Public Sub setTime(long date) defines an object Date existing using time value given in milliseconds. If the value of milliseconds given contains time information, the driver will set the components at the time in the default time zone (zone of the Java virtual machine running the application) which corresponds to zero GMT.

put question in the form of data

I have a SSN or EIN number field. The xml output must be in the format 123-45-6789 or 12-3456789 depending on whether the entity is a person or a company. I have a few other areas, I can probably use to trigger one format rather than the other, but I don't know if I can selectively format a field in several ways.
Is this possible and if so, does anyone have a sample or a script that could do that?
I know that I could view messages, postings and others on the ground, but it would be a better user experience, if she has been formatted endangered in this way, users can enter the data of some sort that they were comfortable. Thanks for your suggestions!

Hello

I did some tests and it seems that change the picture for text objects clause has no effect.

This also does not work when you use the terms of the alternative image with different regional settings

Thus, the only way I've found is to format the data with the Format() method in FormCalc.
```
var source = $.rawValue
var formattedSource

if (AcctOpenProcesssubform.CSSystemSetupForm.Account_Client_Info.personalCust_domicile.US_Citizen.rawvalue eq "us") then
  formattedSource = Format("XX-XXXXXXX", source)
else
  formattedSource = Format("XX-XXX-XXXX", source)
endif

$.rawValue = formattedSource
```

question of the event: event ['data']

The following function is within a class of the YouTube API that the I found Googling. It manages the state changes copied this function in my application because I need to listen to and consume some of the same events. My function is triggered at the right times except this ['data'] event throws the following home runtime error.
ReferenceError: Error #1069: property not found on flash.events.Event data and there is no default value.
--
private void onPlayerStateChange(event:Event):void {}
/ / Event.data contains the parameter of the event, which is the new player State
var stateIndex:Number = event ['data'];
{switch (stateIndex)}
case 0: clearInterval don't (this.updateInterval); break;
case 1: updateInterval = setInterval (function (): void {})
currentTime = player.getCurrentTime () * 1000;
}, 500); break;
box 3: this.duration = this.player.getDuration () * 1000; break;
}
this.dispatchEvent (event);
}
--
Thanks for you help,
VC

this.loader.content.addEventListener ("onStateChange", onPlayerStateChange);

The content is of type DisplayObject, but the runtime is loaded a subclass of

DisplayObject. This object is dispatching onStateChange, is probably a custom

event with property inside data. However, the Manager is registered with the

class generic event that works for the custom event extends to the base event

class. Your man is to avoid the compilation error by type table

event syntax ['data'] instead of an event.data object. I don't know what

event type is the contents of your shipment but it sholud be a data

property inside, because the one you use now of course didn't. That's why

the error only at run time and no compilation.

C

Question about the use of dates

Hello

I have a few SQL used for a calendar in the APEX and have a duration field to set the end date.

What I need is an additional field that would be a date, but I need a registration for all dates in the date from beginning to end date, including all the dates between the two.

select ID
         ,VISIT_DATE
         ,duration
         ,VISIT_DATE + round(DURATION)-1 END_DATE
from FIELD_VISITS_CALENDAR

Results

ID     |VISIT_DATE|DURATION     |END_DATE
-------------------|------------|---------
241     |22-JAN-09 |     .5     |22-JAN-09
239     |16-JAN-09 |     .5     |16-JAN-09
242     |23-JAN-09 |     2     |24-JAN-09
237     |08-JAN-09 |     1.5     |09-JAN-09
221     |12-DEC-08 |     2     |13-DEC-08
233     |23-DEC-08 |     1     |23-DEC-08
238     |15-JAN-09 |     1     |15-JAN-09
240     |09-JAN-09 |     1     |09-JAN-09

Wanted results

ID |VISIT_DATE|DURATION       |END_DATE  |CAL_DATE
---|----------|---------------|----------|---------
241|22-JAN-09 |     .5     |22-JAN-09|22-JAN-09
239|16-JAN-09 |     .5     |16-JAN-09|16-JAN-09
242|23-JAN-09 |     2     |24-JAN-09|23-JAN-09
242|23-JAN-09 |     2     |24-JAN-09|24-JAN-09
237|08-JAN-09 |     1.5     |09-JAN-09|08-JAN-09
237|08-JAN-09 |     1.5     |09-JAN-09|09-JAN-09
221|12-DEC-08 |     2     |13-DEC-08|12-DEC-08
221|12-DEC-08 |     2     |13-DEC-08|13-DEC-08
233|23-DEC-08 |     1     |23-DEC-08|23-DEC-08
238|15-JAN-09 |     1     |15-JAN-09|15-JAN-09
240|09-JAN-09 |     1     |09-JAN-09|09-JAN-09


{code}

Thanks
Adam

Like this?

SQL> ed
Wrote file afiedt.buf

  1  with t as (select 241 as id, to_date('22-jan-2009','dd-mon-yyyy') as visit_date, 0.5 as duration from dual union all
  2             select 239, to_date('16-jan-2009','dd-mon-yyyy'), 0.5 from dual union all
  3             select 242, to_date('23-jan-2009','dd-mon-yyyy'), 2 from dual union all
  4             select 237, to_date('08-jan-2009','dd-mon-yyyy'), 1.5 from dual union all
  5             select 221, to_date('12-jan-2009','dd-mon-yyyy'), 2 from dual union all
  6             select 233, to_date('23-jan-2009','dd-mon-yyyy'), 1 from dual union all
  7             select 238, to_date('15-jan-2009','dd-mon-yyyy'), 1 from dual union all
  8             select 240, to_date('09-jan-2009','dd-mon-yyyy'), 1 from dual)
  9  --
 10  select distinct
 11         id
 12        ,visit_date
 13        ,duration
 14        ,visit_date+(case when rn < round(duration) then rn else 0 end) as end_date
 15  from t, (select rownum-1 rn from dual connect by rownum <= (select max(duration) from t)) x
 16* order by t.id
SQL> /

        ID VISIT_DATE   DURATION END_DATE
---------- ---------- ---------- ----------
       221 12/01/2009          2 12/01/2009
       221 12/01/2009          2 13/01/2009
       233 23/01/2009          1 23/01/2009
       237 08/01/2009        1.5 08/01/2009
       237 08/01/2009        1.5 09/01/2009
       238 15/01/2009          1 15/01/2009
       239 16/01/2009         .5 16/01/2009
       240 09/01/2009          1 09/01/2009
       241 22/01/2009         .5 22/01/2009
       242 23/01/2009          2 23/01/2009
       242 23/01/2009          2 24/01/2009

11 rows selected.

SQL>

On the design of data warehouse

Hi, I'm newbie
Image:
I would like to know why it is snowsnowflake between Article_lookup and Article_color_lookup.
If I join to shop_facts and Article_lookup with article_id and color_code, Is it rong w?

Hello

article_id and color_code between shop_facts and article_lookup is probably wrong, because I don't see any column color_code in article_lookup...

You can use article_id and color_code to get directly to the shop_facts and article_color_lookup and use article_id to reach shop_facts and article_lookup directly as well. They can be separated or I guess you can put your article_color_lookup between shop_facts and article_lookup (depends on whether or not each article has at least one color).

Is your question in general or on how to model the physical source in a tool (like OBIEE)?

question on the numbers of the UUID on data warehouses

Similar Questions

Maybe you are looking for