Question put in basic network

Similar Questions

• Question put in basic network for the cRIO

  Hi all

  I am new to the use of controllers Labview and cRIO so please be understanding of what may be a silly question.

  I have a computer I want to be networked and four cRIO controllers. I have a router 4 ports and a switch 5 ports available to me. So far I have not been able to find a configuration that will work. Is there one, or do I me different equipment?

  Thanks for your help.

  Ben

  Nevermind - I managed to finally understand something today. Now, do a real job...

• question put on the vSphere iSCSI SAN infrastructure network

  Hi all

  We are a small company with a small virtualized environment (3 ESX servers) and are about to buy an AX-5 SAN EMC (model Ethernet not CF) to implement some of the features of high availability of vSphere. My question is related to the networking of the SAN: we switch dual Cisco 2960 G Gigabit and dual Cisco ASA 5510 firewalls in a redundant configuration.

  I understand that the best practice is to implement iSCSI traffic on a separate from all other traffic LAN switch. However, I do not have the knowledge and experience to determine the real difference than a separate switch would really vs the plan to create a separate VLAN on the switches Cisco dedicated to iSCSI traffic only. I would ensure that the iSCSI traffic has been on a VLAN dedicated Physics (not just a logic) with any other VLAN logical (subinterfaces) on the same VLAN). It is difficult for me to understand how a port gigabit on a VLAN isolated on kit Cisco will perform much poorer than on a dedicated Cisco switch somehow. But then again, I don't know what I don't know...

  The thoughts and the input would be appreciated here: I'm (very) hard not to drop another $6 + in another pair of Cisco switches, at least that this decision will significantly compromised performance iSCSI SAN.

  Enjoy your time,

  Rob

  You have 2 SP each with 2 iSCSI, for example:

  SPA: 10.0.101.1 101 VLANS and VLAN 102 10.0.102.1

  SPB: 10.0.101.2 101 VLANS and VLAN 102 10.0.102.2

  On your ESX to create 2 vSwithes, each with a port vmkernel on an iSCSI network and each with a single physical NIC.

  See also:

  http://www.DG.com/microsites/CLARiiON-support/PDF/300-003-807.PDF

  André

• Can satellite M65-S9092 - I put the wireless network card?

  Hello

  Can I put my card Intel pro 2200BG on Satellite M65-S9092 wireless network so that it is no longer compatible with Windows 7? The Intel Pro 2200BG is no longer supported by Intel as it was abandoned and so they have not issued a new driver so that IPv6 works.

  So I would update my card if possible.

  Thanks in adavnce

  Concerning
  Paul

  Hello

  I think that it shouldn't be a problem to upgrade the WLan card.
  As far as I know its a card wireless network of miiPCI and you would need to also use a WLan card which would support the miniPCI interface.

  The wireless network card supports two pins for the WLan antenna cable.
  Usually, you must connect a white cable to the HAND and a black to the auxiliary voltage

  All that s

• In my post abouyt the Flight Simulator my question' is the basic version of RC flight simulator manf real flight and sold by the great PlainsManf. Compatable Co. / able to work on my laptop 32 bit HP?

  My previous question was using a Flight Simulator on my HP laptop using Vista. Thanks for the reply, but I guess I have myself not clear. Vista will support the

  Basic Flight Simulator manufactured by Real flight Manf and distributed by Great Plains model Manf. ?

  Hi GoldwingerYW,

  Yes, manufactured by actual flight Flight Simulator is supported by Windows Vista.  For more information I suggest you to contact the manufacturer.
  http://www.GPSoftware.com/
  http://www.GPSoftware.com/realflightbasickb.shtml#installation

  Note: Since the next time try to pursue a particular issue in a single thread and do not create a new thread.

• Questions of Virtual Private Network (VPN) connection

  OK I did some research on the private network connections, and I have a few questions:

  • Is it true that a connection to a vpn is possible thanks to a transport to a Wi - fi (I want to connect to a network non - bes)?
  • As far as I know, you can connect to a vpn only if create you a vpn manually account via the phone options menu. Is it possible to programmatically create the connection without having to manually create the profile?
  • This connection can be established via a proxy server?
  • Any article or the sample code will be really appreciated

  BlackBerry Smartphones have supported integrated to connect through a VPN using WiFi.  Other transport routes are not supported out of the box for this.

  There is no way to programmatically configure a VPN.  Virtual private networks can be configured on a BlackBerry Enterprise Server and pushed to users.

  BlackBerry Enterprise Server is able to connect through a proxy server.  All of the BlackBerry Java API does not include API to manage proxy communications.

• Question put in place an Action to save files in CS4

  I am putting in place an action to save a batch of files I created using the variables (as shown in this video: http://bit.ly/MnWqdF), but I come up against what seems to be the kind of a stupid question. I'll go into the Actions window and check the current file to save. AI in form and then stop recording. Sounds simple enough, but when I put this action to execute a package on my dataset it saves all files without an extension. I missed another step where I put the file format that the action is supposed to record with? I'm confused. I tried this using a few different file formats and they all have the same come.

  It's what looks like my output:

  

  and my simple action:

  

  Any help would be greatly appreciated!

  When you save your action, not to over write the existing file, give it a new name fresh.

  your action should look like "saveasdatasets", mentioning the name of file, instead of "saveas2" where he shows that the folder

  

• Basic questions on R basic 12.1.1 of the administrations?

  The Forum - I am newbie in apps and I'm learning the basic principles of the Administration of Oracle Apps R 12.1.1 Please bear with me for these novice questions:
  
  Details of my environment:
  
  Have installed R 12.1.1 on Linux x 86-64 using a quick installation.
  
  Installation of localization of applications: /orafin/SCREWS /.
  
  Output of ls - l/orafin/SCREW /
  
  Apps
  DB
  Inst
  
  Questions:
  
  1. What is the file Apps environment location? I see that there are two files in the following location * "/ orafin/SCREWS/apps/apps_st/appl."
  
  a. APPSVIS_orafin.env
  
  b. VIS_orafin.env
  
  Is it APPSVIS_orafin.env or VIS_orafin.env?
  
  2. Why are there two files APPSVIS_orafin.env and VIS_orafin.env?
  
  3. for running autoconfig on level apps should I be sourcing system with APPSVIS_orafin.env or VIS_orafin.env?
  
  4. What is the location of the file of database environment? What is *"/orafin/VIS/db/tech_st/11.1.0/VIS_orafin.env"*?
  
  5. What is the database version used in 12.1.1 default Raidinstall?
  
  Thanks in advance!

  Hello

  All your questions are answered in the concept and installation manuals.

  Installation Guide for Oracle Applications: Quick installation using
  http://download.Oracle.com/docs/CD/B53825_03/current/Acrobat/121oaig.PDF

  Concepts of Oracle Applications
  http://download.Oracle.com/docs/CD/B53825_03/current/Acrobat/121oacg.PDF

  1. What is the file Apps environment location? I see that there are two files in the following location * "/ orafin/SCREWS/apps/apps_st/appl."

  a. APPSVIS_orafin.env

  b. VIS_orafin.env

  Is it APPSVIS_orafin.env or VIS_orafin.env?

  Source APPS.env file all will call the other file (see the contents of the two files to check).

  2. Why are there two files APPSVIS_orafin.env and VIS_orafin.env?

  First file will call several EPS files (to set the variables env and the custom file env if exists)

  3. for running autoconfig on level apps should I be sourcing system with APPSVIS_orafin.env or VIS_orafin.env?

  APPS.env

  4. What is the location of the file of database environment? What is *"/orafin/VIS/db/tech_st/11.1.0/VIS_orafin.env"*?

  Yes.

  5. What is the database version used in 12.1.1 default Raidinstall?

  It's in the manual - please read :)

  Thank you
  Hussein

• Windows Vista Firewall: Uncheck basic network layout would make my computer more secure on the Public network?

  I use the Public network a lot.  I noticed that on my Windows Vista firewall, Core Networking is checked on by default.  Unchecking it would make my computer more secure on the Public network?  I already checked in my firewall settings, block all incoming connections.  Regarding security, I run MSE, like Spyware Blaster in the background.  Automatic updating and Malware Protection are on.  My other security settings are OK.  I do not understand why Core Networking is checked on by default.  This would make an open port, right?  Unchecking it would make my computer more secure?  Thank you.

  Hello

  If you uncheck Core Networking IPv4 and IPv6 will be unreliable or blocked.

  You have a router, a firewall (today, most have them) which is excellent protection
  for your network against external influences. In addition, Windows Firewall.

  Windows Vista Networking-
  http://TechNet.Microsoft.com/en-us/library/bb742618.aspx

  Better to use WPA/WPA2 security if they are available and you can hide the SSID that will help
  help others to see the network (note on some routers more hide the SSID)
  causes of connection problems and if they find out the name he is more useful).

  Wireless network general recommendations of security for individuals
  http://theillustratednetwork.MVPs.org/LAN/SoHoWirelessSecurity.html

  Introduction to wireless network security
  http://netsecurity.about.com/od/Hackertools/a/aa072004b.htm

  10 tips for Wireless Home Network Security
  http://compnetworking.about.com/od/wirelesssecurity/TP/wifisecurity.htm

  Securing your wireless network
  http://www.practicallynetworked.com/support/wireless_secure.htm

  How to secure your router Linksys Wireless - similar can be used for other routers
  http://www.pctipguys.com/index.php?option=com_content&task=view&ID=57&Itemid=36

  What are the different wireless network security methods?
  http://windowshelp.Microsoft.com/Windows/en-us/help/b385cc8a-AF25-489e-a82e-decf6df26b681033.mspx#EZB

  Hope these helps.

  Rob Brown - Microsoft MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Question about Visual Basic 6 programming

  Coding iproblem. I type thr suite depc fpr the object:

  Private Sub cmdNme_Click()

  When I hit the Enter key or arrow down the first 12 characters of erasure. The cursor appears on the next line.

  I am not able to code a program. Thi s problem occurred recently. Programs compiled before that run successfully, but

  code shows missing lines. Y at - it an update to fix this problem?

  Hello

  I suggest you according to the question in this forum and check if that helps:

  http://social.msdn.Microsoft.com/forums/en-us/vbgeneral/threads

  It will be useful.

• When I put my home network there are other computers which are not mine

  I noticed some other media servers on my PS3.  So I checked my network on my computer and of course, there are 5 other computers that I do not possess or know now.  I've changed most recently of ISPS.  What is a router problem, or an ISP issue.

  Hi ShaneMartin13,

  This looks to me to something to do with the access provider. I could contact them and see what they have to say about it, because as I understand it, this does not occur before moving on to the new ISP, correct?

• basic network switch

  Hi first of all, I'm not a master of the nets... Data: - I have a PowerConnect 6224 - I have 7 NAS connected to pass - 1 GB - I have a server with 4 GB Ethernet x 1 connected in the 4-port switch with aggregation of links - all THE WORK FINE - which means I use only 4 G to ingest data into 7 NAS. I usually need to ingest 300-500-1000 GB on each NAS during the night (very rare will be used at the time of the day) problem: when data packets are going to 'arrive' in switch will be send to all ports of the switch. This means that port 1 switch (connected to NAS1) will get dataNAS1, dataNAS2,... .dataNAS7 (but will drop to 7 dataNAS2). How much this extra package will affect my data transfer / performance? If will affect... How can I maximize data transfer? Someone suggest me something like this: VLAN 7, each VLAN will contain the NAS port and LAG ports. LAG ports will be common to all VIRTUAL networks. But I do not know how to proceed and if will increase my switch performance... I hope I do a good explanation of my problem. Best topic, Daniel

  The transfer of data is done in the same VLAN should not present a decrease in performance. Where you can see a slow down, it's to LAG 4 port connection to the server. transfer large files of 7 different sources at the same time is going to get bottle to pass to the server LAG.

• Windows task manager looks completely wrong-it has no tabs for applications, services, processes, performance and put in a network, just a box of size rectangle TASKS WORKING ON?

  The Windows Task Manager seems completely wrong - it has no tabs for applications, services, processes, performance and networking, just one size rectangle box SHOW the TASKS of WORKING ON?  I use it all the time close process and close programs stuborn. None of these options are CURRENTLY available? The only thing I can think is I went to delete one of my readers WD3.0 data and he says it has been used by another program and I've had that happen before and just go close a lot of the process by typing Control, Alt and delete which opens the windows task manager. I recently changed "System Configuration'under'msconfig" Normal startup to "selective startup" and reduce the number of drivers and programs loading to 'Start Up', as he ran 90 things and slow start. "" "» I have no viruses or malware. I changed the "system configuration" back to normal + restart and that he would remove the progams, or processes that have been intefering with the Western Digital HD software. THIS IS WHEN I FIRST NOTICED WINDOWS TASK MANAGER HAS BEEN SCREWED UP.

  But I can't because my Windows Task Manager is just a rectangular box with a single word to the top sayingTASKS!  Without tab with all the other options as in (program, process, services, performance, and network management).

  Would BE AN INTELLIGENT PERSON please TELL ME WHAT TO? I don't want to do a system restore , as I just cleaned it all points this week and just started around and added a bunch of programs and data this week that I let go.

  PLEASE HELP ME TECHE AND MICROSOFT. I PAY $250 p/year FOR THIS DELL ALIENWARE MACHINE LOADED due to it's PERFORMANCE AND THEY WILL NOT ANSWER (1) DANG SOFTWARE ISSUE WITH what THEY ARE PAID. THEY WANT $60 - $100 OR MORE TO ANSWER THIS QESTION FRENCH ANOTER. THEY USED TO, WHEN I COULD BUY GOLD SUPPORT BUT THEY SELL ON THIS MACHINE, SO I'M ON MY OWN AND THANKS FOR THE ADVICE LIKE THIS...

  The Microsoft Support web site.

  The task manager has two different views. For the display that includes menus and tabs, double-click the border of the Task Manager window. To return to the view without menus and tabs, double-click anywhere in the border around the tabs.

  We won't have the information mentioned in the first response of Sandsweep.

  (I confirmed Microsoft's answer worked.) I must have clicked on the edge of the window Task Manager to have switched over to the second, less familiar view.)

• Question put on the scale of the DateTimePicker

  Hello

  I'm running into a problem of particular display with DateTimePicker... I set a DateTimePicker to preferredWidth: Infinity so that it fills the entire screen. It works fine when the DateTimePicker is set to the default mode, which is DateTimePickerMode.Date.

  Whenever the other modes are selected, the control does not fit... I added a code snippet that reproduces the question mentioned above... Any suggestions?

          Container
          {
            leftPadding: 20
            rightPadding: 20
            topPadding: 20
            bottomPadding: 20  
  
            DateTimePicker
            {
              id: dateTimePicker
              preferredWidth: Infinity
            } 
  
            DateTimePicker
            {
              id: dateTimePicker2
              preferredWidth: Infinity
              mode: DateTimePickerMode.Time
            }   
  
            DateTimePicker
            {
              id: dateTimePicker3
              preferredWidth: Infinity
              mode: DateTimePickerMode.DateTime
            }
          }
  

  A report to the issue on jira and it is a known issue and will be fixed in 10.1.x.

• What key is used to put on the network without wire on the laptop?

  original title: network programs network networking Internet Web site Site Web Web Site URL

  WHICH KEY ON MY LAP TOP TUNS O WIRELESS NET WORK

  Hello

  What is the number and the model of the computer?

  Many laptops have a switch wireless on the front or side of the computer. Find a switch on your computer. If you have a switch, make sure that it is enabled. Some computers also use a combination of function keys to switch on or off. Check the documentation that came with your computer for details about the location of the wireless switch.