question setting scrolling

Similar Questions

• HP Envy 700-216 graphics Office Questions setting memory

  My computer, running Windows 8.1, has an A-10, with graphics card GPU in the HD 8670 D processor.  I know that it uses system memory.  I have found that it was using 768 MB on the 12 GB PC12800 RAM (1600).  I don't know where, or whether it is possible to adjust so that it uses more memory to my system.

  Would be really useful to use a bit more, because I doubt I'll be close to everything medium anyway?  Can I pay, is it possible?  I tried looking in almost all settings, but don't see anything to get to this setting.   I noticed some things seem to take the activation in the BIOS, but not knowing what they did exactly, I wouldn't change a thing.  Also, I looked through catalyst and saw nothing there either, to adjust.

  One of the reasons for which I had a processor A-10 (a series) is that I read later, you can add a graphics card, and that she would work with the GPU graphics to make for a better combined graphical experience.  But I noticed in the specifications of the motherboard (MS - 7778 Jasmine) the comment "If PCI-E card is installed you will have not yet boarded Graphics '   or something of the sort.  I was wondering what this means you cannot plug into these jacks on the motherboard, or the graphical part of the A-10 processor will just dormant?

  Any help on these questions would be useful, as well as suggestions of the best PCI-E graphics to get.  I have a power supply 550 Watt here somewhere - just need to find and check to see if it has all the appropriate Sockets.  Thank you!

  James

  J_Mike, welcome to the forum.

  Video Ingrated will use as much memory system as needed up to 1 GB, I think.  You don't have to adjust.

  Yes, the embedded video is disabled if you install a discrete video card.  However, it is not negative.  A discrete video card will improve performance as well.

  The 550W PSU will be good for one of the new intermediate level video cards.  Most of them requires a minimum of 400 w to work properly.

  Please click on "BRAVO Thumbs Up" if I helped you and click on "Accept as Solution" If your problem is resolved.

• Interesting question of scrolling

  Hi everyone, I have a problem with scrolling in my area

  The page layout, I currently have is:

         vfm0 = new VerticalFieldManager(USE_ALL_WIDTH | USE_ALL_HEIGHT | NO_VERTICAL_SCROLL | NO_VERTICAL_SCROLLBAR);
          add(vfm0);
  
          vfm1 = new VerticalFieldManager(USE_ALL_WIDTH | VERTICAL_SCROLL | VERTICAL_SCROLLBAR);
          vfm0.add(vfm1);
  

  and I add a created custom field to vfm1.

  However, every time I scroll the focus passes power to another, but the screen does not scroll down UNTIL the last field wins the update. Once the last field acquired focus, scrolling further causes the screen to scroll down.

  I tried to add simple labelfields at the vfm1 and it scrolls perfectly but created custom fields are causing the problem.

  Can anyone think of what may cause this effect?

  In the custom field is created, I replace the onFocus() and the onUnfocus() but I do not see why this would have caused this problem.

  I found the problematic code.

  So the custom field I have added is horizontalFieldManager and inside, I bitmapfield

  Now, in the horizontalFieldManager I crushed focus... that makes no sense since fieldmanagers don't really get the focus (as in the past, I read in this forum).

  At the same time, I was the substitution of development for the bitmapfield as well.

  Question/bizarre and illogical behavior...

• UI - Custom Paint in Horizontal Field Manager after completing the setting scrolling

  Hello

  I am able to do horizontal page scrolling when you add fields in horizontalFieldManger.

  But now I want to do a custom in horizontalFieldManager, paint using the page horizontal scrolling top given adjustment.

  Thank you

  It seems that you want to have background - repeat some almost text in your example. Then move it out of the subpaint and by the paintBackground-, you will not have to invoke any Super... here.

  Now when you say that a horizontal scrolling does not work, what exactly do you see? What do you see? Do you have enough focusable fields in your handler for scroll? Have HORIZONTAL_SCROLL style bit set?

• N00b question - setting Table height

  I have a table inside a layer, I want to put this table to have let say 10 columns and I want the height of the entire table to 100 px.
  What is happening is that the table does not change its size, what is happening, it is that the table is bigger then the div itself in the page.
  
  So how to change and limit the height of the table as I want?
  
  

  Hmmm.

  Best suggestion at this point may be to search the archives. I have
  don't ' know not whence these models 'Halo', but they seem to be
  very popular and also seem a little difficult to customize. I've seen a lot of posts
  has this respect, and I don't ' know not, but perhaps the answer is already
  waiting in the archives.

  The archives can be found here:

  http://groups.Google.com/group/Macromedia.Dreamweaver
  http://groups.Google.com/group/Macromedia.Dreamweaver.AppDev

  Try looking through the archives, if that is not ' fix you, after return.

  For your question, you can't set a height for the table. A table will be extended to
  show everything that is inside.

  You can control the height of the div, and if the div expands to show the content.
  or hides the content that passes over. This is set with the overflow:
  attribute (show/hide/auto).

• Question setting baud rate to IMAQ using Camera Link

  I have a card PCIe-1433 to link camera, with a camera of Basler. I found that I can put the gain and exposure both directly in the camera with the help of the link series and order series. It works very well. I do this programmatically by using the CLAllSerial.DLL.

  Series orders take too long to send in my application because of the default 9600 baud rate, so I was able to send a command to the Basler camera up to its transmission speed, then changing the baud rate of the port com series camera link for the match. The result is that I can quickly talk to the camera. Sweet so far.

  However, with the Basler camera and camera link com serial port to the higher transmission speed, I can no longer acquire images using imgXXX IMAQ commands. I get a time-out of orders series IMAQ must use to control the camera for Imaging. Essentially the IMAQ driver does not know the baud rate change. I don't see how I can tell the IMAQ driver what output baud rate to use. Also, NEITHER MAX becomes unusable in this situation.

  How can I, via the IMAQ driver, increase the speed of transmission of orders series to the camera via the connection of the camera?

  See you soon,.

  Wayne

  So, I thought this close and post the solution. To increase the speed of transmission of communications series through camera link, you must:

  -Use the NI Camera File Generator to change the file of the camera (or simply edit it directly, since it is the text file).

  -Run NI MAX and connect to the camera using the new camera file. MAX will not be able to talk to the camera at the moment, because the speed of camera has not yet been changed.

  -In your application, first set the link rate 9600 series, so you can talk to the camera. Now change the baud rate in the camera itself, using all save changes, etc., are necessary for the camera, you are connected to. Finally, change the speed of link series to baud rate selected in the file of the camera. (It goes without saying that the serial link baud rate and baud rate camera must match).

  Now, both the driver AND AND the camera are according to the new baud rate. You can exit the application and allows to access your camera... until you turn off the camera... how he NI MAX (at least the Basler I use) restores baud rate 9600. Works great!

  See you soon,.

  Wayne

• Question screen scrolling very Jumpy - how can it be improved?

  I have Setup 3 MS servers Windows Server 2012 R2 Remote Desktop connection to the Terminal Wyse C10LE.  When scrolling in documents of the display screen does not clearly.  I tried to reduce the level of encryption and security settings, but still no improvement.  This is the configured RDP connections.  Running out of ideas and wyse is not much help.  Network connections are 1 GB. Here are the virtual machines.

  Try asking in the Windows Server forum:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• QML question setting of dynamic components

  I am wanting to adjust objects in a component definition in my main qml.

  hand. QML

  Page {
     id: mainPage
     Container {
         id: root
  
     //Container in separate page
     SomeCustomControl {
         id: someCustomControl
     }
  
     }
  
    onCreationCompleted: {        //I attempt to change them but nothing is recognized past customDef        someCustomControl.customDef.changeContainer.background = Color.Blue  }
  
  }
  

  someCustomControl.qml

  Container {
      id: root
  
      property variant attachedDef    property alias customDef: myDef
  
      Container {
         id: body
      }
  
      attachedObjects: [
          ComponentDefinition {
              id: myDef
              source: "myDef.qml"
          }
      ]
  
     onCreationCompleted: {
        if (!root.attachedDef){
          root.attachedDef= myDef.createObject();
        }
        body.add(root.attachedDef);
  }
  
  }
  

  myDef.qml

  Container {
      id: root
      property alias ccback: changeContainer.background    //Goal is to change the background color
      //From main.qml
      Container {
          id: changeContainer
          preferredWidth: 100
          preferredHeight: 100
          background: Color.Green
      }
  
  }
  

  I don't know how to access the components in the component definition to change

  I thought about it, instead of using the alias customDef, if I just use the Variant that he accepts the definition inside objects

  hand. QML

  onCreationCompleted: {   if (someCustomControl.attachedDef){      someCustomControl.attachedDef.ccback = Color.Blue   }
  }
  

  The other form of definition makes things a little crazy unless is just a really small item, I had just questions so that it connects, but then I played a little with this example, I wrote just out and turns out it was not as hard as I thought

• Small Question: Setting of the different units of measure?

  Hi guys

  I'm no expert with Id and I was invited to present a design for print, using Id to create a print ready PDF. The dimensions given for me are 10 feet by 3 feet, with a 3mm of eave. OK, I set as 120inches by 36inches measures. But how then to set the purge in millimeters?

  Any help would be appreciated.

  Kind regards

  Graham

  You type in

  Units of measure can be changed by right-clicking the sovereigns, in the preferences or with a hotkey combo (which I keep forgetting who it is). However, almost all areas where you can type a unit value, you can also type in a different unit of measure. So in your case you just type in "3 mm" to the purge.

  (... "Pi" really added to the list of units?)

• Newbie question - Parallax scrolling a logo right

  Hello

  I am designing my new site using Muse.

  I would like my logo Center, top of the page to the browser, but that the user scroll to the bottom of the page I would like the logo to move out of the way to the top right of the browser.

  What I did, is to create a retangle the size of the logo and placed the Center but the scrolling happens within the retangle.

  Can someone direct me on how to do this?

  Thanks in advance.

  It seems that you've been playing with the scrolling effects available for the fill option.

  Try to use the scrolling effect controls panel right to work with the object. You may need to disable the effects of roll fill everything first.

  Reference: http://helpx.adobe.com/muse/tutorials/scroll-effects.html#Using%20the%20Scroll%20Effects%2 0panel % 20to % 20apply % 20scroll % 20effects % 20to % 20page % 20element

  See you soon,.

  Vikas

• Question about scrolling and Movie Clips loaded library

  I hope I am posting this in the right forum.

  OK, I am using actionscript 2.0, and I'm doing a picture scroll Gallery. I have a clip with three layers. the first contains a clip used as a scroll bar. The second is a mask used to hide the contents of overflow, and the third contains thumbnails of clip from movie. When I click on one of the thumbnails, it loads a symbol containing a larger version of the image above the thumbnails on the same layer. My problem is the large image is added to the top of the clip, even when it scrolls out of view. I want it to appear on the horizon, so that the user doesn't have to scroll all the way up to the top to see. It's annoying and confusing. Is there a way to do this?

  Here's the code I used to create the effect of scrolling (there is actually a whole lot more code but it is very long, so I'm not there add it now.) I'll do it if I must)

  (Oh, and there is no text involved in this.) I just got this code on a tutorial and I have not changed the variable names yet)

  var scrollUpper:Number = 58;
  var scrollLower:Number = 309;

  var textLower:Number = 60;
  var textUpper:Number = - 179;

  var scrollRange:Number = scrollLower - scrollUpper;
  var textRange:Number = textLower - textUpper;
  var startY: Number = imagesHolder_mc.thumbs_mc._y;

  //
  function scroll() {}
  var moved: number = imagesHolder_mc.scroller_mc._y - scrollUpper;
  var pctMoved:Number = moved/scrollRange;
  var textMove:Number = pctMoved * textRange;
  imagesHolder_mc.thumbs_mc._y = textLower - Gauchedeplacez;
  
  }

  imagesHolder_mc.scroller_mc.onPress = function() {}
  this.startDrag (false, this._x, scrollUpper, this._x, scrollLower);
  this.onMouseMove = scroll;
  }

  imagesHolder_mc.scroller_mc.onRelease = scroller_mc.onReleaseOutside = function() {}
  this.stopDrag ();
  this.onMouseMove = null}

  What you have explained, it seems to say anything that scrolls to adjust its position so that the top is in the display area after adding a new symbol.  I don't see where it would be your scroll controls, the position of which scrolls.

  I'm a little curious.  You seem to be saying that as new images are selected, they are added to everything that has already been selected, so the reason for scrolling to see things.  Why don't you just show the selected image and remove everything above it so that there is no need to scroll?

• Newbie on the aperture lens question sets

  I did have the chance to try a goal at opening fixed yet. I just wanted to know if you can still change the opening of like for example f/2.8 to f/8 or more. ? Or is the only opening you can f/2.8. How does this work?

  This is not a "fixed" aperture because it cannot be changed.  This means that this isn't a "variable" opening that changes as the focal length changes.  This lens keeps f2.8 it is thanks to its focal range.  It can and it has all the apertures from f2.8 to f22.

  This goal is, BTW, the best 24-70mm made today.  There's nothing better.

• BlackBerry Smartphones 2 Questions: Setting recurrent events calendar & auto unlocking

  I have an 8700 phone.

  1. I need to define a fortnightly recurring appointment in my calendar. However, there is no option to select a mode bi-weekly. The recurrence only available options are None, daily, weekly, monthly, annual. Help, please!

  2. I put my phone to 'Lock lock on Holster' (according to the security option). When I take it off of the case, I have to press on * unlock to turn, which I find it too heavy. Is there a way to "Unlock the handheld computer" automatically when removing it from the case?

  Thank you

  Rob

  rfelaire wrote:

  2. I put my phone to 'Lock lock on Holster' (according to the security option). When I take it off of the case, I have to press on * unlock to turn, which I find it too heavy. Is there a way to "Unlock the handheld computer" automatically when removing it from the case?

  sHello,

  Yes, it's easy. Just disable the lock on the Holster.

  When your blackberry is holstered, there is a small magnet that said 'you're inside me' for screen and blackberry keyboard do not work as long as the blackberry is in the Holster. As son as you come out of the Holster, the screen and the keyboard are available for type.

  It works for the Blackberry case, as well as for some other pouches/holsters from other companies, provided that they have the magnet

• Question setting

  Basically, what I'm trying to do is to make a completely different site to appear in the middle of an already existing site. I have been informed of how to do it is through frames. So I created a new page with 2 frames: a top one for a navigation bar that is common across all pages on my site and a lower which has a sperate in there site. When I click on one of the navigation buttons in the upper part, it just opens the link at the top of the window. I want the frame occur only on this page, and when I click on one of the links to go to another page without the frames. Is this possible?

  You must specify the target. Before continuing, you should get at least a basic understanding before starting to build a site of images:
  http://www.w3schools.com/HTML/html_frames.asp

• How Can I Set horizontal scroll bar in BitmapField

  Hello

  It comes to Prasad. I'm new to the Blackberry development. Can someone explain to me how can I set scrolling horizontal bars/scrolling a BitmapField installation. Cause of the Image is larger than the size of the screen. The user should be able to see the Image. The image is in fact a graph on this case. I already used various layout managers to do this. But finally I have nothing. I read a lot of forums about it. And I tested it. But nothing works well. Blackberry JDE API said the Horizontal scrolling not yet implemented. I'm stuck here.

  So please be kind to give me a solution for this.

  Thank you.

  Prasad.

  Quck search this forum using "scrolling bitmap image" got the following, you will find more if you look.  Very useful tool is to be found.

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&message.ID=595&query.ID=2883...