Question to edit the newprods.txt file before you run AD splicer

Similar Questions

• HTML Parsing error: Cannot edit the item container parent before the child element is closed (KB927917).

  Original title: HTML Parsing Error:

  When I go on this particular Web page, I can open the page, but with errors.  The error I get is: HTML Parsing Error: impossible to edit the item container parent before the child element is closed (KB927917).  Can someone out there help me solve this problem.  Also, it is the only Web page devoted to this particular site that does this.

  Hi Debbie9089,

  ·         What browser do you use?

  ·         Have you been able to access this site much earlier?

  If you use Internet Explorer, you can follow this link and check if the problem persists.

  Why do I get an "Operation aborted" error message when I visit a Web page in Internet Explorer?

  Hope the helps of information.

  Please post back and we do know.

• Trying to backup computer, get the error message "the C: drive has errors" "Windows has detected corruption of file system on C:. You should check the drive for errors before you can restore it. »

  I'm trying to back up my computer and so I went to back up files and attempted to save DVD RW Drie (f), then recovery (E :).  Then in the form following, I clicked on next, and I get the message "the C: drive has errors" error "Windows has detected corruption of file system on C:. You should check the drive for errors before you can restore it. "I hit the" check the drive for errors and it told me that windows can't check the disk in use then I hit the schedule disk check. "  and then nothing happened.  What should I do?  How can I save my files?

  I planned it, rebooted, and nothing happened.  I have tried three times now

  Hey Ruffscicle

  read the information on how to run the check disk at the link below vista64.com

  If the first method does not work, try the other methods

  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  have a Happy New Year

  Walter, the time zone traveller

• I need the config of the robots.txt file

  OK I am running hmail Server im trying to webmail, part I need to config the robots.txt file, how can I do. also I can get the newspaper but after I log in I get 404 page not found what can I do

  http://www.hMailServer.com/Forum/

  Have you tried to ask in their Forums at the link above.

  http://www.hMailServer.com/index.php?page=support

  And they also have technical support Options.

  See you soon.

  Mick Murphy - Microsoft partner

• Edit the raw IDML file?

  I have here a document that hangs completely in CS5.

  It's an anchored frame and whenever I delete InDesign crashes.

  I tried exporting to IDML and opening it, but it still crashes CS5.

  Then I tried to open the IDML in Notepad, but this is nothing but the code, what seems strange to me, I thought it was supposed to be a variant of XML?

  in any case, I was wondering if it is possible to edit the raw IDML file so that I can remove the object embedded in the actual file.

  Possible?

  Eugene: an IDML file is a file of zip in disguise. If you're on a Mac you could open in that is Springy, look at its content and display its content XML right out of Springy to, say, TextWrangler. There, you can edit the file and write back to the IDML when closing the file with a "Save" of Springy. I'm sure someone can do it on Windows as well.

  The main problem is to identify the correct XML file (there are many; depends on the size of your InDesign project) and the discription of text right here frame. So if you can download the IDML on a public download site, I can try to get rid of the anchor text block. Of course I need a hint (some unique strings of text) to find the XML file.

  How have you tried to remove the text block? Have you tried using the editor for this mode (you could remove his sign to anchor here).

  Uwe

• I received this e-mail supposedly from Itunes. Back up and protect your media and Apps.id files before you lose.  Is - is this legitimate?

  I received this e-mail supposedly from Itunes. "Save and protect your media and Apps.id files before you lose it."  Is - is this legitimate?

  No, it's a phishing attempt - you can transfer to Apple: [email protected] and then delete him.

  Phishing and similar e-mail: Phishing and other suspicious emails

  The phishing emails: identifying fraudulent "phishing" email - Apple Support

  ITunes real e-mails: identification of legitimate on the iTunes Store - Apple Support emails

  View the purchase history of your account: view the history of your purchases from the iTunes Store - Apple Support

• How to disable the Message box 'the current compatibility setting is not supported. Turn off compatibility view before you run this web page.

  Hi all

  Since a few days, we are on 11.1.2.3.500 and using IE 11. In IE 11, we can use Oracle EPM Suite only in Enterprise Mode, otherwise only "Bindows" appears. Now, my question is how can I disable (or remove) the Popup Message "the current compatibility setting is not supported. Turn off compatibility view before you run this web page. "because it's really embarrassing that this message whenever I start a planning application, Manager of calc or what ever.

  Thanks a lot for your help.

  Kind regards

  André

  You can go to tools > compatibility view settings and you should be able to remove the Web site / uncheck compatibility view so that you won't get this message

  HTH

  Amarnath

  ORACLE | Essbase

• Where the Acrobat device stores a copy of the only readable files that you want to change?

  When you open a file in read-only and try editing (writing, stressed...), application if you want to save a copy of this documenty that you can modify.

  Where the Acrobat device stores a copy of the only readable files that you want to change?

  I can't find, I can only access these files from recently opened.

  I need to retrieve and transfer the copy changed on a computer.

  Hello Giulia,

  You can also navigate to the folder where all the copies of read only PDFs are registered by going to the device file Explorer.

  Storage object parent go to download > Adobe Acrobat

  Here you will get all the PDF files.

  Thank you

  Abhishek

• I'm going to erase my media Cache files before you start a new project, but when I go to/Library/Applications/Common/there is no media Cache folder. I have never had this problem before and am 10.9.5 OS and using clues CS6?

  I'm going to erase my media Cache files before you start a new project, but when I go to/Library/Applications/Common/there is no media Cache folder. I have never had this problem before and am 10.9.5 OS and using clues CS6?

  Hi Dave,.

  The location is ~/Library/Application Support/Adobe/Common to be exact.

  Make sure that you type the TILDE (~) key.

  When in the Finder, click the go > go to folder... > Type ~/Library and navigate to Application Support/Adobe/Common

  Thank you

  Regalo

• Hello, how can I choose what image the film will show before you press play and the movie starts?

  Hello, how can I choose what image the film will show before you press play and the movie starts?

  You can not.  At least not with Adobe tools.

• I have monthly CC and LR and I try to download the new LR6 on my Mac. The error I get is "you run an operating system supporting Lightroom is more." Refer to the system requirements for a full list of supported platforms

  I have monthly CC and LR and I try to download the new LR6 on my Mac. The error I get is "you run an operating system supporting Lightroom is more." See the system requirements for a complete list of the supported platforms. "I checked that my requirements and LR should be supported. Don't know what else to do I can't download.

  Hi Jenn,

  Please check the help below document for the technical specifications for the purpose of Lightroom:

  The system configuration required

  Kind regards

  Sheena

• Editing the toolbars.xml file in CS5

  Hello. I made a few changes to the toolbars.xml file, but I can't get these changes appear when I run the application, Dreamweaver CS5. I left / reopening of Dreamweaver and restarted my computer, all to nothing does not. On a hunch, I deleted the file entirely from the Repertory of toolbars , but the toolbar is always responsible in its original plan, leading me to believe it's some sort of caching memory/question. My goal is simply to rearrange a few buttons on the toolbar. Does anyone know how to get the changes to appear?
  

  Program : Dreamweaver CS5

  File : C:\Program Files (x 86) \Adobe\Adobe Dreamweaver CS5\configuration\Toolbars\toolbars.xml

  OS : Windows 7 Professional

  Any help would be greatly appreciated.

  Thank you.

  Hello

  First of all, you should never modify configuration files in the installed directory.

  You are probably trying to edit a file that has already been modified by an extension, this file is located in the user configuration files located in the position that these are installed, see the info to locate these files Sub - "Locate your personal configuration file" in the faq, http://forums.adobe.com/thread/494811.

  The files in these folders will rewrite the standard dw config files.

  If you would like more information I suggest that you read the help files "Extension from Dreamweaver" - http://help.adobe.com/en_US/dreamweaver/cs/extend/index.html.

  PZ

  www.pziecina.com

• Is it possible to edit the ultiboard log file (v10.1.1)?

  I made the mistake of removing parts of a design Ultiboard and will then mark them up a very different conception of Multisim. Now when I try to renumber all reference indicators and annotate back to Multisim, he wants to remove all items first and then make him renumber. It is with the version 10.1.1. Is it possible to edit the log file if it doesn't do the renumbering of part?

  Since this drawing took me 3 days to deliver, she really sucks if I start more can renumber parts.

  I thought that the answer would be no because I think they address this version 11. But I found a way to 'cleansing' of the log file. I created another design, just copied and pasted in the new design. At that time, I had the same exact design, with the same reference indicators and all traces of tact, but none of the nets. I've annotated front of Multisim and introduced all the nets without error. Now I have renumbered all parts and retro-annotation. He wanted to stick all over again but this time that Multisim just said "not supported - add part xxxx" which meant that there nothing done. But she made the reference of all changes of the indicator. Yay. Even if she was in trouble with multi-sectioned parts. He would get a right door, but the rest would be something different with "xx" in the reference indicator. As "Uxx6A". So all I had to do by clicking on the parties and select 'replace the component' and it will show the indicator just with a single gate used and I just had to select the same door.

  So problem solved.

• Certification of material-can not find the storage50info.txt file to...

  Hello

  I had a problem when running test. He said cannot find storage50info.txt, then failed.

  2014-02-20 09:52:56 UTC... [32 m

  2014-02-20 09:52:57 UTC [February 20, 2014 09:52:56: TRANSPORT] [0] INFO: 192.168.8.150 host is running version 3.4.1 STAF [0 m...] [32 m

  2014-02-20 09:52:57 UTC [February 20, 2014 09:52:57: TRANSPORT] [0] INFO: 192.168.8.152 host is running version 3.4.1 STAF [0 m...] [32 m

  2014-02-20 09:52:57 UTC [February 20, 2014 09:52:57: HAND] [0] INFO: file is already deleted

  2014-02-20 09:52:57 UTC [0mCannot find storage50info.txt file at the location workspace/TestSessions/FC_DAS.d/Collect_Storage_Information/20140220095255.

  2014-02-20 09:52:57 UTC please make sure you Verify test runs, and had a status.

  2014-02-20 09:52:57 UTC

  2014-02-20 09:52:57 UTC FAIL

  2014-02-20 09:52:57 UTC Hash ValulesZero_Status = >

  2014-02-20 09:52:58 UTC Clone_Status = >

  2014-02-20 09:52:58 UTC vaai_plugin_version = >

  2014-02-20 09:52:58 UTC ATS_Status = >

  2014-02-20 09:52:58 UTC storage_array_mode = >

  2014-02-20 09:52:58 UTC storage_boot_device_esx1 = >

  2014-02-20 09:52:58 UTC storage_array_type = >

  2014-02-20 09:52:58 UTC storage_path_policy_2 = >

  2014-02-20 09:52:58 UTC vaai_plugin_name = >

  2014-02-20 09:52:58 UTC storage_boot_device_esx2 = >

  2014-02-20 09:52:58 UTC storage_path_policy_1 = >

  2014-02-20 09:52:58 UTC lun_found = >

  2014-02-20 09:52:58 UTC alua_followover = >

  2014-02-20 09:52:58 UTC [32 m

  2014-02-20 09:52:58 UTC [February 20, 2014 09:52:57: LOGGER] [0] INFO: log file preparation: tmp/logs/Feb_20_2014_09.52.57_9357.log... [0 m

  2014-02-20 09:52:58 UTC 1

  2014-02-20 09:52:58 UTC Test FAILED

  Thank you very much for waruwaru suggest

  I have sloved this problem...

  When I add Datacenter esxi hosts, I use IPs. So he can't find the hosts esxi by host name.

  [February 20, 2014 13:53:53: MULTITECH] [0] FRAME: called VTAF::TestLib:Sphere:Lib:STAFSDK:HostSystem:GetAllVMs (HostName = "esxia" password = "infocore" username = "root") returned UNDEF

  [February 20, 2014 13:53:53: VIRTUALMAC] [0] FRAMEWORK: creating new VM ESXiA-VM1-victory-lsi from scratch...

  [February 20, 2014 13:53:53: TESTHASH] [0] ERROR: cannot run processSetup for configuration: cannot run createHOMObj for configuration: No. GuestOS appearing in the XML file

  [February 20, 2014 13:53:53: TESTHASH] WARN [0]: found objects that need to be cleaned

• Location of the text (txt) file

  Hello world

  For some reason if I try to import data from a txt file in a folder on the same location as my video file it does not work:

  on startMovie()
    importFileInto(member "Contact", the applicationpath&"Documents\Contact.txt")
  end
  

  But if I move the txt file, next to my movie and change the jargon for:

  on startMovie()
    importFileInto(member "Contact", the applicationpath&"Contact.txt")
  end
  
  

  It does not work...

  I add this jargon to a film script.

  Any ideas?

  Thank you in advance...

  Rafa.

  you might want to use "the moviePath" instead of "applicationPath.  When you are in design mode, applicationPath will point to the executable Director, not your dir file.