Questioning the dates by quarter
Hi all!After having done some research, I wrote a query to return a list of results based on the quarter. I spent errors, but the query does not return any results now every quarter of an hour 4. Don't know what I'm missing here. In the database field has the Date/time value. Any help would be greatly appreciated, David.
Remove the single quotes. DatePart ("q", LdSaledate) is a function call, and #Quarter # is digital.
Phil
Tags: ColdFusion
Similar Questions
-
questioning the date of the Hijra
Hello.. I have a date hijri in a table with the value as follows:
HIJRI_DATE
7/11/1426
8/11/1426
9/11/1426
10/11/1426
How I got that record using HIJRI_DATE BETWEEN 7/11/1426 "AND 10/11/1426"? I tried it but not recordings of shows...
Thank you.Hi user,
Why don't you try like this.
HIJRI_DATE BETWEEN to_date('7/11/1426','dd/mm/yyyy') AND to_date('10/11/1426','dd/mm/yyyy')
Concerning
Sankar MN -
Hey,.
IM new at Oracle and had some questions about the way in which the Date for the conversion of time takes place. I have a table with data fields defined as
COLUMN NAME DATA TYPE NULLABLEDATA DEFAULT DT_COMPLETED DATE Yes NULL VALUE DT_RECEIVED DATE Yes NULL VALUE If I do a select then I get result in the following format:
16 JANUARY 01
30 JANUARY 01
5 MARCH 01
Question: The DATE type saves both time values even if I do not see them in the result of select?
If I execute the following query
SELECT DT_RECEIVED, TO_CHAR(DT_RECEIVED,'HH24:MI:SS')
Of
TABLEX
I get the following result:
16 JANUARY 01 13:37 30 JANUARY 01 15:28 5 MARCH 01 13:49 QUES:If the same query returns the following data set, 00:00:00 means 12:00:00 am?
20-SEVEN.-15 00:00:00 20-SEVEN.-15 00:00:00 Hello
If a column is date in oracle, it has so much of the time.
If you want to see the time thus part
SELECT DT_RECEIVED, TO_CHAR(DT_RECEIVED,'HH24:MI:SS')
Of
TABLEX
under column of DT_Received instead of using TO_CHAR(DT_RECEIVED,'HH24:MI:SS') then you need to change the date format in the NLS settings.
Yes, it means say 00:00:00 12:00:00 am
-
Display the data in the form of column headers
I am trying to achieve in Apex 4.2
My table is like (example)
Identification number
date of date_a
value_1 number
Value_2 number
Value_2 number
I have my sql like
SELECT id, date_a, value_1, value_2, value_3
from my_table
If the report displays in the form
ID date_a value_1 value_2 value_3
1 01/01/2012 10 20 30
15/03/2012 2 12 14 24
Can anyone show me an example of how to create such a report
01/01/2012-15/03/2012
1 2
10 12
20 14
30 24
I took a look at pivot, but doesn't seem to be the thing
See you soon
Gus
Gus,
First of all you must understand SQL itself cannot change the names of the columns for a query, as Frank has said.
Columns in a SQL query are the 'projection' and the number of columns, the names of them and the data types must be determined before all data are extracted.
See the following article: 101 PL/SQL: cursors and Projection of SQL
Apex is simply based on the queries that you write, and even there not magically be able to change the names of columns in report based on your data.
This is not to say what you want is impossible... it's possible... but not easily...
See: how a function having a dynamic number of columns in the pipeline?
Essentially the data itself have be questioned or known, before the data is retrieved, so that requires only the generated columns dynamically based on known data (for example, the criteria entered by a user) or you can do a query of two passes... questioning the data only once to get the values and then dynamically generating a second query to extract data with dynamically generated column headers.
In the Apex of reports you will usually have the problem report attributes are defined as part of the update and are determined when the query is assigned to the report (that you can manually override the headers)... but the apex will not allow lines dynamically the changes based on the data, for standard reports, it allows. I have not tried to do in the Apex, but you can maybe try and generate the report results using a two-pass method, to put in an HTML region, but it depends on what user interaction is required with the report, that you far built-in report functions.
-
Calculate the date of the first or last in a quarter
Hello
I have data of project with a start date and end date I need to calculate the number of days per quarter
project x: 15/03/06 - 15/05/06
15 days Q1 = Q2 = 45 days
I'm then going to calculate the percentages of resource. I can get the bt of the watch with a hack of a time to identify the first or the last day of a given quarter. Any help win my sincere admiration.
Sorry, misread the question. The district will rely on the company that you work for. If the end of his is the same as an end of year calendar (31 December), then the example below will be accurate. Change the dates according to the needs of the company.
You can hardcode the variables in your application.cfm page.
quarter1start = "01 - jan -";
quarter2start = '01 - apr -';
quarter3start = "01 - jul -";
quarter4start = '01 - oct -';Programatically, the end of each quarter is always the day before the start of the next quarter.
I would add "year" to the equation dynamically, to keep in it before compatible. -
Get the data from the current quarter
Hello
I was wondering how I would go about getting data from a table that is in the current fiscal quarter?
It's the simple query to get all the data:
$q_calls_sql = "SELECT * FROM renewal_contact WHERE userid ='". "." ' $user_id. "'";
$q_calls_query = $con-> query ($q_calls_sql);
$q_calls_numrow = $q_calls_query-> num_rows;
Here's what I currently show the quarterly data, but only shows do not all data:
$q_calls_sql = "SELECT."
OF renewal_contact
WHERE the timestamp > = GETDATE(), DATEADD (qq, 1, getdate ()) & & timestamp < GETDATE(), DATEADD (qq, 2, getdate ()) ';
$q_calls_query = $con-> query ($q_calls_sql);
$q_calls_numrow = $q_calls_query-> num_rows;
All I have to do is show the num_rows of the above query.
MySQL QUARTER() function deals with calendar quarters rather than the fiscal quarters. In the United States, first by the federal Government's fiscal quarter begins October 1, dealing with MySQL as in the fourth quarter. The first fiscal quarter in California begins on 1 July, that MySQL considers (rightly) as of the third quarter.
A way to get the quarter is to use a custom like this function:
function getFiscalQuarter() { $month = date('n'); $year = date('Y'); switch ($month) { case 1: case 2: case 3: return ["$year-01-01", "$year-03-31"]; case 4: case 5: case 6: return ["$year-04-01", "$year-06-30"]; case 7: case 8: case 9: return ["$year-07-01", "$year-09-30"]; default: return ["$year-10-01", "$year-12-31"]; } } $quarter = getFiscalQuarter(); $sql = 'SELECT * FROM renewal_contact WHERE `timestamp` BETWEEN "' . $quarter[0] . '" AND "' . $quarter[1] . '"';
-
How to complete the data for months current quarter of the last month of the previous quarter
- Here is the create table and insert the statement how my data is asCREATE TABLE SAMPLEDATA (Snapshot_M DATE, Date_Ky DATE, F_Quantities INTEGER)INSERT INTO VALUES SAMPLEDATA (SEPTEMBER 1, 2014 ", 1 SEPTEMBER 2014", 14)INSERT INTO VALUES SAMPLEDATA (OCTOBER 1, 2014 ", 1 OCTOBER 2014", 13)INSERT INTO VALUES SAMPLEDATA (1 NOVEMBER 2014", 1 NOVEMBER 2013', 12)INSERT INTO VALUES SAMPLEDATA (DECEMBER 1, 2014", 1 DECEMBER 2013', 11)INSERT INTO VALUES SAMPLEDATA (JANUARY 1, 2014 ", 1 JANUARY 2014", 10)INSERT INTO VALUES SAMPLEDATA (FEBRUARY 1, 2014 ", 1 FEBRUARY 2014", 90)INSERT INTO VALUES SAMPLEDATA (MARCH 1, 2014 ", 1 MARCH 2014", 20)INSERT INTO VALUES SAMPLEDATA (APRIL 1, 2014 ", 1 APRIL 2014", 23)INSERT INTO VALUES SAMPLEDATA (MAY 1, 2014", 1 MAY 2014', 30)INSERT INTO VALUES SAMPLEDATA (JUNE 1, 2014 ", 1 JUNE 2014", 70)INSERT INTO VALUES SAMPLEDATA (JULY 1, 2014 ", 1 JULY 2014", 20)Desired results set:Snapshot_M Date_Ky F_Quantities10 1/1/2014-2/1/201410 1/1/2014-3/1/201401/01/2014 41 10/20144/1/2014 5/1/2014 234/1/2014 6/1/2014 234/1/2014 7/1/2014 23My requirement is to load the data in the cube.So to summarize, data that are loaded onto the month last only a quarter Q1 tax (Jan) should server as a data for the quarter Q2 next month (February, March, April), the data loaded on the last month of Q2 (Apr) will be server as forecast data for Q3 months and so on.Thank you in advance.
with
SAMPLEDATA as
(select to_date('09/1/2014','mm/dd/yyyy') snapshot_m, to_date('09/01/2014','mm/dd/yyyy') date_ky, 14 f_quantities of all the double union)
Select to_date (October 1, 2014 "," mm/dd/yyyy ""), to_date (1 October 2014 "," mm/dd/yyyy"), 13 union double all the
Select to_date (November 1, 2013 "," mm/dd/yyyy ""), to_date (1 November 2013 "," mm/dd/yyyy"), 12 union double all the
Select to_date (December 1, 2013 "," mm/dd/yyyy ""), to_date (1 December 2013 "," mm/dd/yyyy"), 11 union double all the
Select to_date (January 1, 2014 "," mm/dd/yyyy ""), to_date (1 January 2014 "," mm/dd/yyyy"), 10 of all the double union
Select to_date (February 1, 2014 "," mm/dd/yyyy ""), to_date (1st February 2014 "," mm/dd/yyyy"), 90 union double all the
Select to_date (March 1, 2014 "," mm/dd/yyyy ""), to_date (1 March 2014 "," mm/dd/yyyy"), 20 union double all the
Select to_date (April 1, 2014 "," mm/dd/yyyy ""), to_date (1 April 2014 "," mm/dd/yyyy"), 23 union double all the
Select to_date (May 1, 2014 "," mm/dd/yyyy ""), to_date (1 may 2014 "," mm/dd/yyyy"), 30 union double all the
Select to_date (June 1, 2014 "," mm/dd/yyyy ""), to_date (1 June 2014 "," mm/dd/yyyy"), 70 union double all the
Select to_date (July 1, 2014 "," mm/dd/yyyy ""), to_date (1 July 2014 "," mm/dd/yyyy"), 20 union double all the
Select to_date (August 1, 2014 "," mm/dd/yyyy ""), to_date (1 August 2014 "," mm/dd/yyyy"), 22 of the double
)
Select snapshot_m, date_ky, last_value (f_quantities) ignore nulls on f_quantities (order by date_ky)
of (trunc (add_months (snapshot_m-1), 'q') select snapshot_m, date_ky,)
-case when trunc (add_months (snapshot_m-1), 'q')! = lag (trunc (add_months(snapshot_m,-1), 'q')) (date_ky order)
then lag (f_quantities) (date_ky order)
end f_quantities
of sampledata
where date_ky > = date ' 2014-01-01'
)
where snapshot_m > = date ' 2014-01-01'
order of date_ky
SNAPSHOT_M DATE_KY F_QUANTITIES 01/01/2014 01/02/2014 10 01/01/2014 01/03/2014 10 01/01/2014 01/04/2014 10 01/04/2014 01/05/2014 23 01/04/2014 01/06/2014 23 01/04/2014 01/07/2014 23 01/07/2014 01/08/2014 20 01/07/2014 01/09/2014 20 01/07/2014 01/10/2014 20 Concerning
Etbin
-
Questions about the data reporting PowerCLI store
Hello
I have a problem with a script that I use and I'm looking for an idea on the problem.
I have a script that gathers pretty much all the information on the virtual machine in my cluster. (Disk size, free disc, data store).
Most of the time, it works very well. But there is something that bothers me little. It doesn't report the data store that each VM is linked to. It works for most, but on a select few, it's not.
I wonder if there is something in my script which is the first cause, or if it is a question of VSphere.
My script and the output is attached.
Thanks in advance for the help.
-AaronI was able to get the warehouses of missing data as well.
That's when the VMDK are stored on more than 1 data store for a specific virtual machine.
In this case, the line
$myDS = Get-Datastore | Where { $_.Id -eq $VM.Datastore}
nothing will store in $myDS because $VM. Data store is an array of MoRefs.
In fact you try to map the partitions in the guest OS with data warehouses that host the VMDK files.
There is no easy solution for that I fear (there are number of threads in this community who are trying to do the same thing).
I fear that there is no real solution for this problem
-
Technical question from the data store
Hello everyone.
I have a question that you can maybe answer:
"Is it possible to have a WARNING message (check) before formatting a LUN (EMC)?"
Let me explain:
We currently have a datastore composed of 12 LUN (of 236 GB), and even if this isn't in the best practices of VMware, I made a mistake (und) when creating a new data store.
Indeed, I used a logic unit number which was attached directly to a virtual machine (in Raw Device) pour set up my new data store.
Would you have a solution that makes a data control (on the logic unit number) and which could see us the partition proposed pour extend the data store contains data!
Thanks in advance for your answer!
J. Gaspoz
Hi Julien
Nice to see you on communities
The vCenter will list all LUNS that are not already in the "Add storage" wizzard data warehouses, and by definition, a RDM en of is not formatted VMFS, since the lun belongs to the VM and it met with filesystem clean so son.
There is therefore no direct way to pour do what you're asking (UN ESX knows nothing about the data on a non-vmfs LUNs).
Personally, plug-in a simple way: the LUN ID. All the LUNs that will be used in RDMS are presented to my ESX with UN LUN ID between 50 and 70 (f.ex.). So I know whether or not a lun is RDM.
Otherwise maybe third-party products (rv maybe tools) can get out a report listing the VM using the RDM.
I hope that helps!
Best regards.
Stéphane Grimbuhler
Senior consultant virtualization & storage (VCP / VCAP-DCA)
VMware instructor (VCI)
My Blog: www.virtualgeek.ch
-
For the previous fiscal quarter date settings?
Hello people,
I have this requirement to choose the dates for the previous quarter. a fiscal quarter is usually January 2011 - March 2011. But in my case, the exercise should be December 2010 to February 2011 and if I check in June 2011 it must return to Mar 2011 until May 2011 and so on. So, how can I optimize to be able to select these dates i.e. 01/12/2010 until 28/02/2011 in where clause for the current date?
create table test_A (id int, col varchar(50),change_date date); insert into test_A values(1, 'A',to_date('20101201 000000', 'YYYYMMDD HH24MISS')); insert into test_A values(2, 'A1',to_date('20110122 000000', 'YYYYMMDD HH24MISS')); insert into test_A values(3, 'A1',to_date('20110202 000000', 'YYYYMMDD HH24MISS')); insert into test_A values(5, 'A1',to_date('20110306 000000', 'YYYYMMDD HH24MISS')); insert into test_A values(6, 'A1',to_date('20110305 000000', 'YYYYMMDD HH24MISS')); insert into test_A values(7, 'A1',to_date('20110307 000000', 'YYYYMMDD HH24MISS')); select * from test_A 1 1 A 12/1/2010 2 2 A1 1/22/2011 3 3 A1 2/2/2011 4 5 A1 3/6/2011 5 6 A1 3/5/2011 6 7 A1 3/7/2011 I only want to see the following 1 1 A 12/1/2010 2 2 A1 1/22/2011 3 3 A1 2/2/2011
select * from test_A where change_date >= add_months(trunc(sysdate,'Q'),-1) and change_date < add_months(trunc(sysdate,'Q'),2) / ID COL CHANGE_DATE ---------- -------------------------------------------------- --------------- 1 A 20101201 000000 2 A1 20110122 000000 3 A1 20110202 000000 3 rows selected. SQL>
SY.
-
Hello
I have 2 date fields in my form, which should display the date in a different format. (yyyy.mm.dd / dd-mm-yyyy)
To get the current date I only use java script
Formular1.p1.date_YYYYmmDD::initialize - (JavaScript, client) var date = new Date(); this.rawValue = date.toLocaleDateString();
My first problem is (red): I get the date in English, but I want it in another language. As it was defined in the form settings
My second question is: How can I format a date/time-sized (not a text field) in javascript with a model specific to the init event?
It seems that my code in the init event replaces the model of the DateTime field configuration
Here is my form, if anyone wants to check it out:
https://Acrobat.com/#d=zeOMyj9MhBdYbVWk8S1pHw
Hello
I think that these two problems are the same, by setting a date/time field using the rawValue always format must be yyyy-mm-dd, if you use a different format, the value is just seen as text and poster without shaped.
var date = new Date();
this.rawValue = util.printd("yyyy-mm-dd", date);
You can also set the formattedValue if you have a date in the correct format.
var date = new Date();
var currentLocale = xfa.resolveNode("#localeSet.#locale").name;
var dateFormat = "date("+currentLocale+"){DD MMM, YYYY}"
this.formattedValue = util.printd(dateFormat, date, true)
This code assumes that the view model is date {MMM DD, YYYY}
The date format specification is in the XFA http://partners.adobe.com/public/developer/xml/index_arch.html specification
Concerning
Bruce
-
strange question by inserting the data...
Hi everone,
I have a strange question. I'm not looking I do something wrong or is this a bug?
I do a simple ' insert into table (select statement). Everything is ok... It's inclusion. But when I run the
"select statement" separately (actual data I need to insert), I get different data inserted in the table.
-> I have observed something else where there is a "case statement" in the selection m than the data in the table are spoil...
EX:
SELECT TRIM (member_span.member_nbr) member_nbr-> this one I see the correct data
(
CASE
WHEN SUBSTR (member.member_nbr, 10, 2) = '00' THEN TRIM (member.member_nbr)
Of OTHER SUBSTR (member.member_nbr, 1, 9). '00'
END Subsciber_nbr),-> This data are spoil seeing incorrect data in the table...
Database version:
Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bi
PL/SQL Release 10.2.0.2.0 - Production
"CORE 10.2.0.2.0 Production."
AMT for HP - UX: release 10.2.0.2.0 - Production
NLSRTL Version 10.2.0.2.0 - Production
< b > "" "did exactly the same thing in a different database. I don't have any problems out there"" "I'm getting problem only with this database < /b >"
Anyone know a bug related to this problem?
Please help me with this question...INSERT INTO member_load(member_nbr, subscriber, ymdbirth, security_group, group_nbr, network_id, cob_date) (SELECT TRIM(member_span.member_nbr) member_nbr, ( CASE WHEN SUBSTR(member.member_nbr, 10, 2) = '00' THEN TRIM(member.member_nbr) ELSE SUBSTR(member.member_nbr, 1, 9) || '00' END) subsciber_nbr, ( CASE WHEN LENGTH(member.ymdbirth) = 8 THEN member.ymdbirth ELSE NULL END) dob, ( CASE WHEN TRIM(member_span.group_nbr) IN('108076', '108077', '108078', '108079', '108080', '108081') THEN 'E' WHEN TRIM(member_span.group_nbr) IN('107001') THEN 'M' WHEN TRIM(member_span.group_nbr) IN('107005') THEN 'J' ELSE 'A' END) security_grp, TRIM(member_span.group_nbr), ( CASE WHEN TRIM(member_span.business_unit) = '01' THEN 'N' || TRIM(member_span.business_unit) || '-' || TRIM(member_span.prog_nbr) WHEN TRIM(member_span.business_unit) = '03' THEN 'N' || TRIM(member_span.business_unit) || '-' || TRIM(member_span.prog_nbr) || '-' || TRIM(member_span.carrier) ELSE NULL END) network_id, ( CASE WHEN LENGTH(member.ymdverify) = 8 THEN member.ymdverify ELSE NULL END) cob_date FROM member_span @dblink, member @dblink WHERE member_span.ymdeff > 20090908 AND member.member_nbr = member_span.member_nbr AND TRIM(void) IS NULL AND member_span.member_nbr NOT IN (SELECT member_nbr FROM member_span @dblink WHERE(20090908 BETWEEN ymdeff AND ymdend) AND TRIM(void) IS NULL) ) ;
Marella Phani wrote:
sven different NLS settings.... How can i find the NLS setting on both the databases.. can i query some metadata table to find that..
Please let me know how to proceed
Anurag...
It is not the problem with my SQL (that I know of). It gives a correct output that I need when I simply run the SQL query.
I just give a few examples of data (no real data).But when I run Insert in staging_table (select statement). I do not see the correct data in staging_table...
Thanks for all the replies...
You can check your NLS settings with
select name, value, isdefault from v$parameter where name like 'nls%';
or in sql * plus with
SQL> show parameter nls NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ nls_calendar string nls_comp string nls_currency string nls_date_format string nls_date_language string nls_dual_currency string nls_iso_currency string nls_language string AMERICAN nls_length_semantics string BYTE nls_nchar_conv_excp string FALSE nls_numeric_characters string nls_sort string nls_territory string AMERICA nls_time_format string nls_time_tz_format string nls_timestamp_format string nls_timestamp_tz_format string SQL>
Please be careful, that my comment about to_char was that under the assumption that you have a column for the number. If the column is VARCHAR2, do not add an extra TO_CHAR around this column. He could not give problems, but is not necessary (I think it can give problems in 9i, but impossible to find a small example yet).
An idea to find the source of your problem would be to change the NOT IN subquery. At least in a NOT EXISTS a subquery. Or even better find a way to access the remote tables only once instead of twice.
not exist
INSERT INTO member_load (member_nbr, subscriber ) ( SELECT TRIM(ms.member_nbr) member_nbr, ( CASE WHEN SUBSTR(ms.member_nbr, 10, 2) = '00' THEN TRIM(to_char(m.member_nbr)) ELSE SUBSTR(to_char(ms.member_nbr), 1, 9) || '00' END) subsciber_nbr FROM member_span@dblink ms, member@dblink m WHERE ms.ymdeff > 20090908 AND m.member_nbr = ms.member_nbr AND TRIM(ms.void) IS NULL AND NOT EXISTS (SELECT null FROM member_span@dblink ms1 WHERE (20090908 BETWEEN ms1.ymdeff AND ms1.ymdend) AND TRIM(ms1.void) IS NULL AND ms.member_nbr = ms1.member_nbr) ) ;
Is ymdeff a number or a string? If it is a string, then change 20090908 in '20090908'. If it is a number then keep as it is.
-
question about the quality of the data and CKM
If I understand correctly, CKM only supports the audit based on the constraints of the db. If I want to have more complicated built with the audit of the business logic, is the quality of the data as a good choice. Or any other suggestions?
In my case, I'll have to check the data in the source table, based on the data in the table from different sources (the source and target tables). This should be doable thanks to the quality of the data, correct? I am new to ODI. When I first installed the ODI, I chose not to install the module of data quality. I guess I can install DQ separately and bind it to ODI? They share the same master repository?
Sorry for the naïve questions, your help is greatly appreciated.
-WeiHi Wei,
Not necessarily.
You can create you own constraint that will only exist in ODI and can be complex.
Right-click on "Constraints" in any data store, and you can navigate between them...
This help you?
-
Question about the dates of the file download.
Why the dates of creation, 'last change' and especially 'last opening' all appear as a date a month when I just downloaded Mozilla for the first time on my Mac? Edit
It's information from the database that you downloaded
the file from. -
debug the symbolic question missing date or in the future feature alpha #dev
Hey please help
I installed a debugging token in my alpha dev unit and added many examples of applications, all running well!
but all of a sudden because of the connection with any other pc or something I don't know he said if poster devlpmnt than debug token mode is installed but its is not valid
error is friendly date in debugging token is missing or in the future!
Error No. East of 881
Please help I tried new chips from the back to the top and also tried to re - register using new keys to the SJC!
also removed debug token frm my camera but still the same error please help
Hi, I also have just got my alpha dev and having the same problem and fixed it.
There are two changes that I've made, so I do not know which set:
1 change the date, clock and time zone in your alpha camera to adapt to your computer
2 open the SDK software, choose the menu Run > Run configurations... > download tabs > Uninstall, then install...I think that the first solution will solve this problem, but if not then try the second solution
Maybe you are looking for
-
Upgrade from XP to Vista, how do I remove the Points of XP restore
I upgraded from XP pro to Vista Ultimate. I tried to delete old restore points left by XP using disk cleanup. No luck. I do not search the forum, but whenever the answer is; "use disk cleanup. Your suggestions are welcome.
-
XP Pro, SP3. I downloaded the free Bullzip pdf printer. Somehow my old printer pdf in my printer disappeared list which I have used for years. I get this message when installing - "you are not allowed to change the settings for this printer. If you n
-
How can I switch to Media Player 10 as Media Player 11 does not work?
How can I return to Windows Media Player 10 without losing the library? Media Player 11 does not work after update. Drivers check out OK, can hear sound on the computer updates have been made and Mr. opportunity fix... no help. Please advise! TX,
-
Supposed to have replacement Fuze intant
I sent and received on 24 June, it was supposed to be here no later than August 10, and I called Sansa two days ago. They told me to wait for an email between 24 and 48 hours of this call. I had to have a status update email to the subject about an h
-
Transfer files Word and Excel for Windows 98 to Windows07
I have an old computer with excel and word files running on Windows 98. I recently got a new printer that does not work with Windows 98. So, I tried to transfer these files on my laptop that runs on Windows07 using floppy disks and external floppy dr