Questions about the function "movie Diff file with...". »

Similar Questions

• Ask questions about the functionality of EA8500 MU-MIMO

  Dear Linksys

  I bought EA8500, and it arrived today.

  I have two questions about the functionality of MU-MIMO of EA8500 AP.

  1. I want to compare the performance between SU-MIMO and MU-MIMO, but there is no option to control this feature in the router admin page. Is that one of the possible ways?

  2 EA8500 supports 1733 Mbps wireless speed, but it resembles the speed of 1 Gbps ethernet cable.

  This router supports really speed 1 Gbps ethernet? or y at - it an option to support more throughput as the aggregation of links?

  Thank you

  Hi, hyeonu. For your first query, it is not possible because there is no option to disable the feature of MU-MIMO on your Linksys EA8500 router. In addition, with regard to your second, you can get a higher throughput of 1 Gbps since this is the maximum capacity of your ethernet connection.

• I have a question about the functionality of Oracle Identity Manager...?

  Hi friends
  I have a question about the features of Oracle Identity Manager.
  Here's my question:
  Self-management is possible network passwords (reset / unlock) with Oracle Identity Manager 9.1.0.2
  
  Very grateful.

  What Kevin suggested this means that you are managing accounts and their password by IOM. If your condition is the same then follow:

  Re: error during password reset using the self-service portal

• Question about the functionality of vector mask

  Hello everyone, I'm fairly new to Photoshop CS 5 so I apologize if I'm asking the wrong type of questions, here goes:

  When you work with vector masks you can:

  (1) "the link" or a vector mask with the other images? ' sharing ' a picture (for example) if I did 'A Building' then duplicated, but wanted to change what build a looked like, I have to only change the mask of the source, then the copies would be updated.

  (2) move the independent image of the vector mask (it seems that I can only move the vector mask, not the image itself). Or in other words: I can move the image and have the mask to follow, instead of being only able to move the vector mask within the limits of the image?

  My application of the question:

  I do a top-down 2D layout of a zone of type "Paste". I did to fill the buildings, building A, B, C, etc. and use multiple copies of each building. Ideally, I would like to be able to 'link' or share say building has a vector mask with all other instances of building A (so that when I change the master, they all change to the new form of mask). The second behavior I have trying to find is the ability to move without moving layer where the vector mask is on this layer (since it seems that you can only move where the mask is, which means that even if I could share masks, they all finish by in the same sense of place I have to re - position each hand again.)

  Any ideas are appreciated, thank you for reading.

  When you work with vector masks you can:

  (1) "the link" or a vector mask with the other images? ' sharing ' a picture (for example) if I did 'A Building' then duplicated, but wanted to change what build a looked like, I have to only change the mask of the source, then the copies would be updated.

  Yes, it's possible, but not with the classic system layer vector mask in Photoshop. Layer masks are part of a layer and not the layers themselves, so that they can be converted into a reusable object.

  The solution is to avoid vector layer masks and use a clipping/layer instead mask. A clipping/layer mask CAN be converted into a smart object that is reusable, and when you change one, all the other instances are also changing.

  The second part of the solution is to convert the layers contained both the clipping/layer to a smart object mask. Then the batch group. By the way, if your buildings are made up of several elements simply to include these additional elements in the clipping group. Another advantage is that each of the elements may still have its own normal layer mask. Win win situation. And layer effects can be applied to layers/clipping masks, once again what is impossible for layer masks. It also opens the doors to a much less destructive workflow.

  (2) move the independent image of the vector mask (it seems that I can only move the vector mask, not the image itself). Or in other words: I can move the image and have the mask to follow, instead of being only able to move the vector mask within the limits of the image?

  This is also solved with the use of layers/clipping masks - the content and the mask can be moved independently in regular layers. Another advantage is that the two can also be transformed individually.

  My application of the question:

  I do a top-down 2D layout of a zone of type "Paste". I did to fill the buildings, building A, B, C, etc. and use multiple copies of each building. Ideally, I would like to be able to 'link' or share say building has a vector mask with all other instances of building A (so that when I change the master, they all change to the new form of mask). The second behavior I have trying to find is the ability to move without moving layer where the vector mask is on this layer (since it seems that you can only move where the mask is, which means that even if I could share masks, they all finish by in the same sense of place I have to re - position each hand again.)

  Any ideas are appreciated, thank you for reading.

  So here's my solution. I made a sample with two buildings, the view from above which could be reused as desired:

  (1) first of all create groups for each building and place the content to those. Then trace layer vector shapes on the content. Set the transparency for layers of mask to a reasonable of opacity for masking easier.

  

  (2) put the vector shape under the layer of content for each building. Then, for (1) and (2), , click on the border between the content and the shape layer. (for Mac), this will hide the enrichment of the content. (3) remember to layer for shape layers opacity to 100%!

  

  (3) then we will turn this building into recyclable items. Convert each content and layer to a smart object clipping mask. Then rename these layers of dynamic object into something sensible (honestly, I forgot to label the layers well earlier, but you catch my meaning here ;-)

  

  Fact! To clone each building, duplicate layer groups. For each instance that you can move the content (which is handy if you share multiple charts of building in the same bitmap or illustrator file), or you can decide to move the mask in place. Or both. It is the same for the transformation. Your choice. To move or transform a building, select the layer group.

  To change or modify the masks or the contents, double-click the smart object of your choice and make a few changes.

  Also, remember that you can insert additional elements in a clipping group by placing it over the first layer and then clipped by clicking again on the border between them. So, in theory, you could start building different looking buildings by adding other dynamic objects in clipping groups. The sky is the limit! In this way, you can create several building blocks to build various buildings with different looks. And still limit the number of blocks - and any update-able.

  Unfortunately, that's when the workflow breaks down a bit: due to the implementation of the object dynamic in Photoshop, you can't change the mask or the contents of the building in context - instead, it opens in its own window of file. This can be somewhat mitigated by placing the two windows side by side (window-> fix--> double vertical installation).

  This brings us to the second caveat: when you make a change, the changes are not updated in real time in the master document. You must first save it. Still a bit of a flow of work, but when same breaker... At least you now have a workflow not destructive instantiated.

  The content of the dynamic object can be replaced easily with a right-click of the mouse on the smart object layer itself. Or use a dynamic object referenced externally instead if you prefer to generate your buildings in an external application.

  BTW, the layer of Photoline system is much more logical and easier to use for this type of work. Layer masks behave like regular diapers. Layers, groups, masks, layers of external file and so forth can be practically cloned and instantiated as smart objects, but the main object is editable in the context, and all the other instances updated in real time. So, it is more convenient. At least this is my experience.

  I hope this has been helpful! Now go build your cities. :-)

  PS: I thought: isn't Illustrator or InDesign is a much more logical choice for this type of work where you need access to reusable blocks of content? It would also be a more efficient workflow and faster - Photoshop is not really designed for this type of work. Illustrator and InDesign provide potentially out of better quality. You can also divide your work into the pages and so on. Here again, you would probably lose the flexibility of smart objects.

• Question about the functionality of CFB2

  Hello

  CFB2 I try and I was wondering if there is a way for me to point to a function and go to the place where it is defined?

  In addition, the built-in ftp seems to be extremely slow (more than 30 seconds to transfer a file).  Is this normal?

  Thank you!

  You can go to the function definition by CTRL + click on the function call.

  -Ram

  Adobe ColdFusion team

• Comments and questions about the mixture ADF Page flows with Trinidad UI

  Hi all
  
  I did a few tests to see how possible it is to use Trinity to the UI (for compatibility of this stinking IE 6) as well as the ADF Page flows / controller of the ADF. My question is whether there is a sustainable configuration from the point of view of Oracle. I did things to make it work and noted the following interesting behaviors (call anaomalies, if you wish):
  
  (1) addition of ADF Page Flow within the reach of the technology for a project automatically adds ADF Faces. If I try to eliminate ADF Faces of the scope of technology, it automatically deletes the flow of Page of ADF as well.
  
  (2) if I remove the ADF Faces DURATION 11 project library and create a page of trinidad (also set up the renderkit and as appropriate skin and remove a moment-false ServletADFFilter of web.xml) I get errors MDS when running the resulting page. I can't correct the error by removing the MDS libraries either - as soon as I put ADF Faces DURATION 11 library back, things are OK.
  
  (3) since I've faced ADF in my scope of technology, all newly created JSPX pages end up having af:document / af:form tags and have the namespaces implemented for ADF Faces. Not useful if I want only parts of Trinidad, but not a show-stopper, either.
  
  (4) an interesting thing that I have reported before... If I have the ADF Page library flow into my project and then configure navigation case in faces-config. XML (I know, wouldn't do that, just an observation, even if someone who has accidentally library ADF Page Flow in their project without any intention to use the ADF Page flows will find this very annoying to debug...), the first click of button that leads to the navigation works very well. All subsequent navigation requires two clicks on the link/button to trigger navigation. This behavior does not occur if you change the case of navigation to redirect = true.
  
  So, in summary, I seems to be the controller of flow/ADF Page ADF working with Trinidad, with a few minor problems of productivity due to an obvious requirement to have the Library Runtime of ADF Faces and the extent of technology ADF Faces included in my project. Now Oracle - is this going to be a sustainable configuration?
  
  I'd also appreciate comments, suggestions and comments from anyone else who has tried or is trying to use the ADF Page flows / ADF controller with a single user Trinity interface (well, in my case, I'm going to blur more using the tag af:template with components of the Trinity, but it's another whole story).
  
  Best,
  
  John
  
  bump #2

  + 1). Adding the ADF Page Flow within the reach of the technology for a project automatically adds ADF Faces. If I try to eliminate ADF Faces of the scope of technology, it automatically deletes the flow of Page of ADF as well. +

  ADF task flows have to ADF Faces e around. Not sure this is documented somewhere, but I hope it's

  (2) no idea about it

  + 3). Since that I've faced ADF in my scope of technology, all newly created JSPX pages end up having af:document / af:form tags and have the namespaces implemented for ADF Faces. Not useful if I want only parts of Trinidad, but not a show-stopper, either. +

  Looks like that is facing an emergency room to have an option in the dialog creation page if create an ADF or page of Trinidad. I'll take a note

  + 4). An interesting thing that I have reported before... If I have the ADF Page library flow into my project and then configure navigation case in faces-config. XML (I know, wouldn't do that, just an observation, even if someone who has accidentally library ADF Page Flow in their project without any intention to use the ADF Page flows will find this very annoying to debug...), the first click of button that leads to the navigation works very well. All subsequent navigation requires two clicks on the button/link to trigger navigation. This behavior does not occur if you change the case of navigation to redirect = true. +

  I'm not sure how to restrict we are on the "do not use" them in combination, but to me this looks like a bug.

  Frank

• Question about the mix of Trinidad component with ADF Faces

  Dear all,
  
  I have a requirement for complex layout that I can't do with just ADF Faces component.
  I found this blog nice wfrom Jobinesh http://jobinesh.blogspot.com/2010/11/layout-tips-organizing-page-content.html
  and I quickly realize that this will solve my problem.
  
  Please note that components of Trinidad has not all client components peer as we have for the ADF Faces. You may need to be measured while choosing this guy
  
  I'm just concerned about this line. I can't really understand what it means and how it will impact my programming of the ADF.
  
  Thank you

  Neliel,

  Which, in my view, that Jobinesh says it's that you will not be able to use the HTML elements of the Trinity as targets for partial triggers. As far as I know, using HTML of Trinidad (trh :) components with ADF is OK, but using 'clean' Trinidad (tr :), you can have problems.

  John

• Questions about the functions as an object

  Hello guys

  Lets assume that one of my components have a function like this

  private var resultHandler(event:ResultEvent):void {}

  var XML = XML (event.result);

  work

  }

  now I instantiate another component, and I want to pass over function as a parameter of the newly created element.

  var newComp:NewComp = NewComp();

  newComp.passFunction (resultHandler);

  ////////

  New component

  public void passFunction(func:Function):void {}

  addEventListener (Event.RESULT, func);

  }

  will be above thing work?

  If this is not the case, how can I do this?

  Thank you very much

  Well Yes, it should work. You have problems with this approach?

  Maciek-

  Truviso, Inc..

  www.truviso.com

  Truviso recruiting: http://www.truviso.com/company-careers.php?i=87

• Question about the functionality of years on Skype?

  So I received messages from my people on my contact list when it was his birthday and I was wondering if they would receive a message whenever it was my birthday. The only thing is that I have the birthday party on my blank profile. When I signed up first it will use this anniversary with my email or it is only as I do not have a birthday?

  If the part of birthday on your profile is empty, your contacts will receive any notification birthday on your part.

• Question about the function of "Messages"

  Hi all
  
  I'm trying to use the feature of Message workspace to inform our users of planning that are connected on downtime etc. While working with the feature, I noticed something-
  
  The broadcast Message is sent by the admin looks like a pop up but only when the user navigates on the current page to another page. He does not appear when the user is working on a dataform and refreshes the data form or things, another option. Depending on how it works now lets say a user is already connected to the planning application and works on a dataform and is just save/update the data in the form of data, it will not see the message at all.
  
  Is there something I'm missing or there at - it another way for the message box is displayed even if the user is hitting refresh? I continued through the broadcast Messages Oracle documentation and it says:
  
  "+ For users connected to the application, the broadcast message displays in their browser the next time they refresh the page or go to another page, if you send the message via the Web or the command line." + »
  
  but it doesn't look like it works when you click Refresh.
  
  Please let me know your opinion on this. Any help is appreciated.
  
  Thank you.

  I think what you see is just the way it works in 11.1.2.1, might be worth totalling a call at Oracle, if you think this is a bug or maybe it has already been addressed.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• theoretical question about the functionality of snapshot

  Consider this scenario

  • Stop a Server 2003 VM

  • Expand the size of the vmdk for the partition to the OS (c :)) drive

  • Snapshot of the virtual machine

  • Start virtual machine

  • Use third-party utility to extend the C: drive

  • Something goes wrong in the process and partition is corrupted.

  Returning on the snapshot would recover this scenario?

  My feeling is Yes, as snapshots operate at the block, and when the snaphsot, everything was ok

  The propronents or opponents?

  See you soon

  AM

  In this scenario, go back to the snapshot will restore the State of the virtual machine before it laying in the guest OS.  I just confirmed it myself in my lab.  From the start I had an error on the computer is not present in AD, account but it is probably because it is an old VM, I have not turned on for some time.

  One thing to remember is that even if the snapshot will return the guest OS of return to the State before you lie down, the VMDK itself file will still be extended.  If you want to cancel you would probably use VMware Converter to create a new virtual machine.

• Questions about the functionality of callback and SMS?

  
  

  You must first create a background application. Therefore extend the Application class. Then, you already said you use persistence. DateTimeUtilities comes in very handy when handling / comparison of DateTime. Then implement the RealTimeClockListener that is raised every minute to check if the date is a specific date in your persistence. Or you can use TimerTask and trigger every hour or every 24 hours. To warn the user of your application to background:

  synchronized(Application.getEventLock()){    UiEngine ui = Ui.getUiEngine();
      Screen screen = new Dialog(Dialog.D_OK, "Look out!!!",
          Dialog.OK,           Bitmap.getPredefinedBitmap(Bitmap.EXCLAMATION),         Manager.VERTICAL_SCROLL);
      ui.pushGlobalScreen(screen, 1, UiEngine.GLOBAL_QUEUE);
  }
  

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/800505/800608/...

• Question about the functionality of ThinApp

  I heard that there are competitors operating on the virtualization of application as follows:
  
  I virtualized office, a user goes and gets used, going two days without using the application, the application is uninstalled alone. In other words, users more than permitted. Anyone knows this feature in VMware ThinApp?

  Hi MauroBonder,

  If I understand, you say that there are some ThinApp competitors who have a feature, if a user does not use the virtualized application then it will get uninstalled automatically so that another user can use that app and that would save them to buy a new license. My understanding is correct? If this is the case, then I would say that ThinApp does not have this feature at the moment. But yes, if you need this feature, then please request a feature to http://communities.vmware.com/community/vmtn/entdesk/thinapp/features?view=discussions.

  Thank you.

• Question about the use of size mixed with ASM disk groups

  I support a RAC 10 g 10.2.0.3 running and using ASM cluster. We currently have a group of data disks, which is 600 GB in size, consisting of 3 individual raw disk 200 GB devices. The RAC cluster runs on a server pSeries IBM using AIX 5.3
  
  I need to add more space, but the system administrator can give me only 100 GB in the new raw device. What will be the impact, if any, the addition of this feature of smaller crude disk in the same data ASM disk group? I understand that ASM is trying to "balance" the general use of each raw device. ASM still works very well, or will he constantly try to rebalance the disk group because the a raw device is only half of the other three? Any help and advice would be greatly appreciated. Thank you!

  It works, I do the same thing in a production database. What happens is, asm will distribute data on the size of the disks. 200 GB drives will get two times more data than the 100 GB drive. The downside is that it will also result in an unequal distribution of the IOPS / s: adults discs will be achieved more often.

  Bjoern

• I have a question about the time machine. I recently updated my Quicken 2015 and there was something wrong with the update. Can I go back in just the Quicken file and restore it until I downloaded the update do I have to restore the entire

  I have a question about the time machine. I recently updated my Quicken 2015 and there was something wrong with the update. Can I come back in all the Quicken file and restore from time Machine before I downloaded the update to do, I need to restore the entire computer?

  Yes, you can just restore this file or application. Use Time Machine to back up or restore your Mac - Apple Support