Comments and questions about the mixture ADF Page flows with Trinidad UI

Similar Questions

• Where should questions about the JDEV/ADF positions?

  Hello

  Where should questions about the JDEV/ADF positions?

  JDeveloper and ADF or

  JDeveloper and ADF?

  I found there may be some different advantageous:

  https://forums.Oracle.com/message/11109674?TSTART=0#11109674

  Thank you.

  Well, the other forum you mentioned is the Korean equivalent of the English forum.

  You have already discovered, it is not controlled to many users. I didn't know that it exists at all.

  In general it is to you where you ask your questions. All for one here are driven by the community and some employees of the Oracle, you cannot wait has answered all your questions. If you really need to answer you go through paid support.

  A tip for getting help is to provide a well-defined use cases, information relating to your environment and documented code showing what you have already tried.

  Timo

• question about the mixture of OSes

  I have a question about installing a dual boot.

  Someone recently bought a copy of Windows 7, but they had the wrong version. They got the 32-bit version instead of the 64-bit and for some reason the store refuses to return or Exchange it.
  They offer it to me that they have to buy the 64-bit version.

  I'm not sure if I need it, but I thought I could try on my laptop. I just realized that I type that they never told me what version of Windows 7 it is.

  This laptop was given to me second hand. It came with Vista Home Premium. I installed XP on another partition, and was so pleased with the results that I've never bothered to fix the Vista partition to get the job to dual-boot.

  If this proves to be Windows 7 Professional or Windows 7 Ultimate edition, am I having difficulties to the upgrade of the Vista partition? I guess I could install it from scratch, but I'm not sure if all the drivers are available.
  Can I try the drivers Vista 7 the way you sometimes try 2000 drivers under XP?

  As you can see, I have several issues of concern. 7 same detects the installation of Vista and make an update if I don't fix it so that the Vista bootloader is present? The XP installation program has replaced the Vista bootloader, and I've never bothered to fix it.

  Finally, is there another recourse that the store for my friend Exchange 7 32-bit 64-bit 7 to save money?

  Looks like somebody bought an OEM of Windows 7 version from a "commercial" version comes with a 64-bit and 32-bit installation DVD.  If someone has already installed and active that the OEM 32-bit version, then, unfortunately, this license cannot be used on another computer since the OEM licenses are permanently tied to the first computer it's installed and activated on.

• Suggestions and Questions about the upgrade my Hardrive Mac and Ram.

  Hi This is my first time asking something in the forums. (At least I think) Well anyway, I got the Macbook Pro Mid 2012 13 "with the retina also runs the OS El captain. I do computer for school and sometimes animation video editing and ive noticed some performance as my projects get bigger and bigger issues. I want to improve my mac, but I'm not very tech savy and don't want to do something useless, so I had a few questions, I wanted to ask you.

  Do I need for my hard drive and my Ram?

  What effect will the upgrade of my Ram and what effect will be upgrading my hard drive with an SSD?

  I saw this SSD online and thought of novice opion that sounds get Id more bang for my buck (link) with her. Is this good? What more to kill? WiIll it still works? Could you suggest some other good affordable options?

  My next question if I decide to upgrade my Ram can provide you with some good affordable links to buy of new RAM sticks, is also 8 GB, the best he can do?

  My next question I watched a few videos online and by installing the updates level looks really easy and fast. But I use bootcamp (to play games sometimes), and I wanted to know if I save my files on my drive as ive seen people do videos, (something to wipe the drive and put it back in after installing updates) will be I lose my windows 7, I lost the disc to reinstall and he check so I really want to buy a new also do not want to lose the things I put in memory.

  From the retina MacBooks you is impossible to pass the ram as it is soldered to the logic board. As with the hard drive, it's just a card ssd and you can't get those anywhere because their hard to find.

• Questions about the function "movie Diff file with...". »

  Hello

  I started working on a project where I'm now a piece of the old code written by an employee has since left my company.  This is a file of sequence TestStand 3.0 calling on Labview 7.0 code. The thing is, there were two of these facilities at different times and, somewhere in the Woods between stations 1 & 2, the code base diverged.  Part of it was due to not being able to get the material in double right for the PXI chassis and part was, apparently, due to the fact that the customer has used the 2 machines to test different models of the object to measure.

  So, I'm looking for copies of the code installed on both machines using the diff feature in TestStand base.  (If that makes a difference, I do this view in TestStand 3.5 since TS3.0 disappeared mysteriously some corrupt on me right now on my main development machine, and if the memories are good, you need to uninstall all the latest version of TS to reinstall an earlier version.)  A quite fun process, no doubt, but a little of your time.)

  Anyway, the first thing I noticed is that many sequence steps have different values of ID of the step Properties.Step look like this: "ID #: 2vMTp0db002mQDXArddRSA.  Play with the diff screen showed an option "Ignore the unique ID of the Step" which got rid of these.  With regard to these single-step ID: when they are generated and they remain constant on a particular machine?  Beyond simple curiosity, I wonder as an another diff is in some of the "on spending target ' or 'On Custom Condition true target' under certain properties of the step and the value down there looks suspiciously like these unique ID (that is, '" ID #randomstuff' ").  Are they all updated dynamically during execution or break something by changing these (for example if I copy a sequence of a crushing in the other version)?

  So, I have filtered the unique ID's.  The next major area of difference is that many, but not all together, VI Labview calls have a difference in the properties of the step > Flexible Labview adapter properties > ViCall > connector pane Checksum > value.  In addition, in some other cases, ViCall > error > connector number is different as well.  This indicates a different underlying VI?

  There are a few other differences, but I can interpret those.  My goal is to get a file of sequence for two machines, so the code will be easier to maintain.  I think that some of the VI with different amounts of connector pane control can be different between two facilities from one of the different hardware components required a library different driver.  This leads to a third question, what to use identical sequence files when the underlying VI may be different?  Is it just the interface must be the same?  As the connector pane has the same types of data and geometry for the presentations of the inputs and outputs?

  Thanks for any help,

  Mike

  I just got the phone with the help of NOR, so no worries on the answers.

  Short version:

  The unique ID is regenerated when a sequence is copied.

  TestStand didn't need to uninstall to reinstall an earlier version of the above.

  Connector pane Checksum involves a different underlying VI, but having the same geometry/inputs/outputs/types of connectors should allow you to have an another VI of facilities without different sequence files.

  Still awaiting support on the question of if the goto pointers updated correctly when a sequence or part of a sequence is copied.

• Satellite SM30-604: 4.25 SpeedFan and question about the right temperature?

  SpeedFan 4.25 is on my Toshiba Satellite SM30 604.
  Until recently, the CPU usage shown was variable.
  Compared to a low percentage (green dots) to somewhere around maximum, according to what I was doing (I have never game, but use purely professional things like Word, Excel, PowerPoint and many websites).

  Temperatures in most of the green time, the high 40-links, the low 50-links (I then scroll to the top of the Speed01 of the fan from 0 to 50% and 50%, it starts to run). I sometimes add an external fan, I work sometimes in very hot climates).
  I have the readings of the time 4.
  Local temperature: 49 c (with this temp color varies between a Green V and a red arrow pointing upwards).
  Temp distance: 85 (with a flame)
  HC0: 26 c (with a green (V)
  Temp1: 86 (with a red flame).

  WHAT ARE THE TEMPERATURES IMPORTANT? WHAT IS LOCAL TIME? TEMP DISTANCE AND TEMP1?

  These very high temperatures, I've had for a day. The fan is working (I hear it, I can feel. "I can see, because I partly dismantled the laptop.) But the Speed01 is 0%, and there is no reaction on the adjustment upward. Or playback is 100% without reaction to setting down. And rotating or disable "auto fan speed has no effect.
  And without any other program running, the CPU usage increased a few seconds after switching on to 100%. I do not notice a significant slow down in the speed of my applications when I start using them. And a virus today scan did not reveal all the important things.
  I can't activate my taskbar more.

  Who has some answers for me. Green in this area?

  Thank you

  Hello Han

  Your ad is very nice and very interesting, but you'll be very happy if someone can explain all this because you are using a non-Toshiba software. It is always recommended to use the original software because software Toshiba designed has been tested and it can just to protect the hardware components.

  Use of software from third party is always at your own risk, and if you have any problems or questions, please contact their own support. They have much more experience with your applications.

  I can just tell you that you should be careful where your laptop is placed and make sure that the device can take a deep breath and cool down properly.

  Good luck!

• Question about the use of size mixed with ASM disk groups

  I support a RAC 10 g 10.2.0.3 running and using ASM cluster. We currently have a group of data disks, which is 600 GB in size, consisting of 3 individual raw disk 200 GB devices. The RAC cluster runs on a server pSeries IBM using AIX 5.3
  
  I need to add more space, but the system administrator can give me only 100 GB in the new raw device. What will be the impact, if any, the addition of this feature of smaller crude disk in the same data ASM disk group? I understand that ASM is trying to "balance" the general use of each raw device. ASM still works very well, or will he constantly try to rebalance the disk group because the a raw device is only half of the other three? Any help and advice would be greatly appreciated. Thank you!

  It works, I do the same thing in a production database. What happens is, asm will distribute data on the size of the disks. 200 GB drives will get two times more data than the 100 GB drive. The downside is that it will also result in an unequal distribution of the IOPS / s: adults discs will be achieved more often.

  Bjoern

• How can I change my HTTPS thing, so it isn't always pop up and ask questions about the sites Web secure when I play some games?

  Feel free to change the title

  How can I change my HTTPS thing, so it isn't always pop up and ask questions about the sites Web secure when I play some games?

  You're talking about Facebook?

  Try the gyration of the Secure Browsing

  http://www.Facebook.com/help?page=1079

• Questions about the implementation of clusters of storage and DTS on active cluster

  I have a few questions about the implementation of clusters of data store and SRS storage in VSphere 5.1.

  We have a data center with about 15 HP blades and a few servers non-lame.  The hosts are all either VSphere 5.0 or 5.1.  Our back-end storage is an EMC VNX 5700 with about 20 stores of data.  All the VMWare is managed by VCenter 5.1 running on a dedicated physical machine.

  Currently, each data store is used individually; No piles of data store are put in place.  When a new virtual machine is created, the administrator usually chooses the data with the most space store.  Periodically, we will go back and manually storage vMotion machines to balance the load.

  Recently, we have expanded the VNX storage, so we now have LUNS in different pools, with different levels of performance.

  What I would do is set up for the data store clusters, so that us when a virtual machine is created, the administrator must not know what data store is in which pool.  Also take advantage of the DRS storage so that the burden of storage will be "refine" himself a little.

  I know the setting up of a cluster of storage in a 'clean' environment is quite simple, but my concern is creation/conversion data warehouses existing in active production in the cluster, while they are used.

  If I access the screen "data warehouses and store data from clusters ', right-click on the data center and create a cluster, and then move the various data stores in the new cluster, will there be an interruption in the production running systems?

  I also wonder about activation of storage i/o control.  It is not currently enabled on data warehouses.  I know it's useful for the StorageDRS, but will be allowing any negative impact on the system?  If I turn on the warehouses of data, is there anything else I should do or set in addition to all that allows him?

  Finally, we are in the process of Site Recovery Manager configuration.  SRS has an impact on the configuration of the data clusters and DTS store?

  Thanks in advance for your comments.

  Mike O.

  Gregg Robertson wrote:

  Hello

  Clusters of data and using DTS store doesn't impact RS even if you create a cluster of data store for storage of replicated data and another for everyone else, this way you machines virtual you want to replicate are not moved on warehouses of data that are not replicated , but will still have the ability to move if there is a conflict.

  Gregg

  With all due respect but SRM and DTS don't go together. SRM does not at all support the use of DTS. So if you are configuring SRM forget DTS for now.

  Reason for this is that SRM knows no DTS and VMs can be in flight when a failover should occur, and bad things can happen. Also, the protection breaks when a virtual computer is moved between data warehouses in a cluster data store.

  In short: don't go there.

• Question about the interruptions and priming

  Hello

  I had a few questions about the startup and interruptions in a virtualized environment

  Assuming that, plenty of virtualization (no material assistance to virtualization of memory ).

  1 initialization: in an ordinary PC, the boot process starts with the BIOS, to expansion ROM, back to the BIOS and MBR secondary boot record, then grub (is it) and finally the operating system. In a virtualized environment with VMM running directly on top of hardware (Native VMM), how is the initialization of the different process, as I understand it takes BIOS-> Expansion ROM - > BIOS-MBR-> other record secondary-> VMM-> OS--> applications >. Am I right on that?

  2 breaks: VMM examines the source interruptions prior to the interruption, so in a multicore environment, assuming a 2 processor core, how the VMM decides on the kernel for which the interruption in intended, prior to shipment of the interruption. Interruptions are tag ID, said core ID?

  Thanks in advance

  -SC

  sidc7 wrote:

  1 initialization: in an ordinary PC, the boot process starts with the BIOS, to expansion ROM, back to the BIOS and MBR secondary boot record, then grub (is it) and finally the operating system. In a virtualized environment with VMM running directly on top of hardware (Native VMM), how is the different boot process, if I understand correctly to -> BIOS-> Expansion ROM BIOS-> MBR-> other documents-->--> OS--> requests VMM. Am I right on that?

  It is simplistic but essentially correct.  A metaphor would be a little better thinking that the hypervisor/vmm is an operating system, except that the process on this operating system are requests or comments OSes.  If the BIOS-> OPROM-> BIOS-> MBR-> hypervisor-> init process of the hypervisor-> reviews of fork () s operating systems.  This can become blurred by the design choices (for example Xen/Hyper-V init start a coded parent hard partition that makes hypercalls privileged to fork() guest OSes; ESXi init runs a very limited subset of applications directly on the hypervisor and ESX Classic is somewhere between these approaches).

  There is a subtle distinction between "hypervisor" and "www."  The "hypervisor" is the operating system of single root (e.g. ESX) who interacts directly with the hardware and has access to everything; a hypervisor is not to be used to run virtual machines.  When we talk about a "hypervisor", the tendency is to describe something which is a BONE (although usually a minimal OS designed only to run virtual machines).  The "www" is the layer that allows a virtual machine run: it provides the interposition, virtualization and emulation services and can be plural (for example a vmm by guest operating system).  Architecture of VMware deal with these two separate components, while most other virtualization platforms merge the two.

  sidc7 wrote:

  2 breaks: VMM examines the source interruptions prior to the interruption, so in a multicore environment, assuming a 2 processor core, how the VMM decides on the kernel for which the interruption in intended, prior to shipment of the interruption. Interruptions are tag ID, said core ID?

  Strictly speaking, the interruption is not transmitted to a guest operating system - receives the hypervisor (or rather the VMM it transmits to the hypervisor), the hypervisor drivers interpret the interruption (for example reading package of NIC, I/O process of HBA, the timer tick completion), then after a new appropriate break in the guest OS.

• I have a question about the time machine. I recently updated my Quicken 2015 and there was something wrong with the update. Can I go back in just the Quicken file and restore it until I downloaded the update do I have to restore the entire

  I have a question about the time machine. I recently updated my Quicken 2015 and there was something wrong with the update. Can I come back in all the Quicken file and restore from time Machine before I downloaded the update to do, I need to restore the entire computer?

  Yes, you can just restore this file or application. Use Time Machine to back up or restore your Mac - Apple Support

• A few questions about the use of data and Cliq

  I have the cliq, however I chose to not get 3G (so I bought full fare). So I have a few questions about the phone and the use of 3G / 2 G/Edge:

  1 - is possible to disable completely the 2G / 3 G/Edge? I know you can switch between them, but are anyway just tell the phone to stop using them altogether since I'm not subbed to the service?

  2. when the update takes place, I guess we'll have to reconnect motoblur and etc, but if I don't have 3 G will I have motoblur connection problems after the update? Or he keeps the latest wifi settings so that it would connect to wifi to connect. When I first got my phone it was not a problem b/c I had 3G for the first month.

  I hope that makes sense, thanks!

  To stop all the data, I would like to download an application called APNDroid. He cut them all down. When you log on to blur you have 3G or WIFI doe this without getting a timeout error. During the process of setting up your Blur account, you can press the menu button and set up your wifi to work, this will connect you to Blur and your phone will be connected to the blur. If I were you I would be rethinking to do a data plan since you are really losing out on most of your main features of phones. It's your choice, however.

• I posted a question about the FBI virus. How to get rid of him. I ' v was only one answer. Someone to give here can help me with that. I am 62 and although I use my high tower dyly I'm not a COMPUTER technician.

  I posted a question about the FBI virus. How to get rid of him. I ' v was only one answer. Someone to give here can help me with that. I'm 62, and I'm not a computer genius. I have some [eratly helpgetting need to get rid of the virus of the FBI. MS antivirus and scan not work or identify it.  Help, please! 1

  Emisoft is a desperately slow download, as I just discovered.

  You can simply run Malwarebytes and it...

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

• Questions about the terms and conditions

  Dear team of Adobe Stock,

  I am considering a subscription for an e-commerce site that I am developing. I have a few questions about the terms and conditions:

  3.5 social media use. You can view or download an unmodified version of the book on the Social media Site if (A) you include a notice of copyright in the work itself (© author name - stock.adobe.com) and (B) the terms of use governing the Social media Site do not include any provision that would grant exclusive rights or the ownership of those works or alterations to anyone. "Social Media Site" means a website or application that puts the main emphasis on facilitating social interaction between its users and allowing users to share content in such social interaction

  What I have to insert in each post on social media on behalf of the author? Generally, this information is displayed only for free images. What I have to insert this information even if I signed up for a plan?

  Thank you

  Hello

  Please see the link below for help:

  http://wwwimages.Adobe.com/content/dam/ACOM/en/legal/servicetou/Adobe-stock-additional-ter ms_20160119.pdf

• Consider purchase of Wacom Cintiq 27 HD Touch - Questions about the tactile feature in Photoshop and Lightroom

  I'm considering buying a 27 HD Touch of Wacom Cintiq monitor. I have a few questions about the two programs Adobe and their use of the 'touch' feature - Photoshop CS6 and Lightroom 5.7 running on Windows 7.

  1 problems related to touch a feature in Lightroom and Photoshop CS6 and 5 resolved that you see on the forums of Wacom a year ago?

  2. If so, is there sufficient value gained through the tactile feature in Photoshop CS6 and Lightroom 5 to justify the $500 price difference between the Cintiq 27 HD vs Touch HD? (I realize that this is a subjective question based on the abundance of its cash).

  3. I intend to stay with CS6 as long as possible to avoid a monthly subscription, BUT I wonder if buy the Touch HD can provide additional key features in future releases of these products that do not exist currently. (It is a pie in the kind of sky in question).

  Thank you!

  Kent

  Support for Photoshop Touch is added by CC 2014.2.2.  However as the Pro Intuos Wacom tablets with touch can be used with earlier versions of Photoshop and the Wacom Tablets Configurator can custom features can be used with Photoshop touch tablets.  I use LR but I don't know that the same thing would be true for her. You can configure the setting for many applications. The device driver knows which application its interfacing with and uses the parameter set for each...

  I have disable most of touch when using Photoshop.  The main reason why I have a Tablet is Photoshop Brush tools. Like Eraser, clone stamp, etc, nothing is better then a pen when it come to create the layer mask.  For most programs, I always use a mouse and I use the keyboard, the mouse and the pen with Photoshop...

  I never wanted a Cintig I do not have my hand between my eyes and the work. I'm not an artist.