Questions about the images shared in Photos

Similar Questions

• Question about the pen tool (w / photo inside)

  Hi all! I have a question about the pen tool. I think that this picture is very useful for my question:

  

  So in this pic is an orange rectangle, and within this rectangle is a blue strip. I would like the blue band surface perfectly (not too much and not covered) the edge of the rectangle. For example, on the lower end of the blue band, you can clearly see that the band does not extend quite far to the edge of the orange rectangle. At the top of the band, he's a little more (a little hard to see). I work with some complex shapes when you use the pen tool and it's really slow me down to compensate for over/under Forms. If she could just snap to the borders of the other forms that would make my life a lot easier. Thanks for reading and please help!

  Duplicate the orange shape and change the fill color to blue. Draw your new shape on that layer, using the Intersect option.

• Questions about the Image matte key

  I'm quite confused on Overlay of Imageand would like to comment on these observations:

  1. When I apply a picture as a cache, it does not seem possible at first to determine what image I used as the matte. After that I applied a mast, can I know what image is used as the mast?
  2. I have a 1920 x 1080 in grayscale, image PSD which is used as cache. The central part of the matte is black, the rest is white. I checked the RGB values in the matte and they 0,0,0 or 255, 255, 255. In the effect of overlay of Image inside the first I composite using Luma Matteand marked to reverse. If I reverse the image in Photoshop so that the Blacks are going to white and vice versa, it makes no difference in the creation. The effect of the matte is the same. Why is this?
  3. If I apply the matte from 1920 x 1080 to an image inside the first superior at 1920 x 1080, the cache does not work. Is this normal? I can get the matte works with the larger image in a new sequence and then this sequence inside the original sequence of nesting, but I do not understand why it is necessary.

  Any feedback is most appreciated. I use CS6.

  Guy,

  Then, you should migrate to the masking effect Track Matte.  Formally, you import the matte in the project (traceable through the reveal in Finder/Explorer) and place on a track above the video in need of carpet.   The effect is placed on the clip (V1) and configured to play the matte on V2 etc.

  

• Questions about the Image of the space, toolbar buttons, resize, arrows

  Here are a few beginner questions more.

  1. is it possible to get rid of the task bars that I have drawn autour ellipses? I rarely use them and would rather have the space.

  

  2. in the reference doc, there are more icons in the space indicated by the arrow. How can I customize this space?

  3. in the resizing of an image, 98% of the time I want to do in percent. Is it possible to do that by default? I could handle this with a keyboard macro, but the pixels to percent drop is not accessible via the keyboard. Solution?

  4. How can I tell PSE 14 make me draw an arrow (i.e., a straight line with a tip of arrow at one end)?

  Thank you very much

  Al

  1. is it possible to get rid of the task bars that I have drawn autour ellipses? I rarely use them and would rather have the space.

  Unfortunately, no. Many users would like.

  2. in the reference doc, there are more icons in the space indicated by the arrow. How can I customize this space?

  For me, I always have these icons on the right... Have no idea at the moment.

  3. in the resizing of an image, 98% of the time I want to do in percent. Is it possible to do that by default? I could handle this with a keyboard macro, but the pixels to percent drop is not accessible via the keyboard. Solution?

  These settings are not 'sticky', unfortunately.

  4. How can I tell PSE 14 make me draw an arrow (i.e., a straight line with a tip of arrow at one end)?

  Two ways: either as a tool option online, or by choosing a type of arrow in the menu (hotkey U) forms.

  Edit:

  The #1 question, my choice is to use the Preferences menu and select 'allow documents floating in expert mode. Allows you to use the screen for editing, which is recommended when you master the main shortcuts. Another tip: the 'tab' key hides the side panels.

• Question about the image of the user interface of the Script

  Hello world

  We can insert a picture into script

  Like this:

  var l is new window ('dialog', 'Testing');.

  var pictures = w.add ('image', undefined, the record ("" ~ / Desktop/mingxing2.jpg ""));

  w.Show ();

  But is it possible to say the script if you do not find the photo, we have the second choice

  Like this:

  var l is new window ('dialog', 'Testing');.

  var pictures = w.add ('image', undefined, of the file ("~ / Desktop/mingxing2.jpg" |)) (("" ~/Desktop/mingxing3.jpg "));

  w.Show ();

  or third choice...

  Thank you

  Respect of

  Teetan

  Hi Teetan,

  Why not call a function that returns the file you need?

  var getImageFile = function () {}

  var f = file (Folder.desktop+"/monImage.jpg');

  ! f.exists & f = file (Folder.desktop+"/image.jpg');

  ! f.exists & f = not defined;

  return f;

  }

  var l is new window ('dialog', 'Missing Image?');.

  flowers of the var = w.add ('image', the undefined, getImageFile());

  w.Show ();

  HTH,

  Loïc

• A question about the image quality?

  I create my menus by using an image that is offered by selected relative when positioning.

  That's by the by... However my menu option is set on the screen as 30 pixels wide.

  If I create the actual image as 30 pixels wide so that the text is very unbalanced and is horrible.

  So if my menu shows 400px by 30px w h and image real must be 800px w h how do I create a good quality image without having such quality terrible 30px?

  I create higher resolution and then somehow reduce the width of the bottom?

  Thank you

  Terry

  Do you use a high-resolution Retina Display?

  Image quality is determined by the total number of pixels in your image - h X w, 325 x 200 500 x 400 vs and the 72 vs 96 ppi vs 300.  So if your screen has a pixel density of high, normal web images may appear grainy on your device but is generally not a problem for the screens with a normal pixel density.

  Consider using the Bootstrap Glyphicons or Fonts-Awesome icons and SVG.

  Open your PSD into illustrator and SaveAs SVG (scalable vector) that is much sharper than bitmaps.

  See the following article:

  A guide to creating a better web of retina - Ivo Mynttinen / User Interface DDesigner

  Nancy O.

• Very basic question about the images in tables

  So I made 4 buttons, 90 pixels wide by 20 pixels high each in photoshop. Then, I made a table 360 pixels wide by 20 pixels high in DW to make a small nav bar. Then I placed the 4 buttons in the table. Why is - it is showing only 366 pixels wide and when I saw the navigation bar on a browser that the 4th button down to the second line. There is no padding or margin adjustment so I wonder why it isn't an exact?
  

  27/09/06 20:47, "614mike" wrote:

  > So I made 4 buttons, 90 pixels wide by 20 pixels high each in photoshop. Then
  > I
  > done a width of 20 pixels high in DW to make a small nav bar table 360 pixels.
  > Then I placed the 4 buttons in the table. Why is this it is showing only 366 pixels wide
  > and when I saw the 4th button browser navigation bar falls down to the
  > second line. There is no padding or margin so I wonder why it is not a
  > exact fit?
  >
  >
  In fact said 0 padding and margin 0, or are you assuming that
  There is no padding or margin because you do not specify any?

  Most browsers use a padding by default and margin applied when you
  don't specify anything whatsoever, and it varies from a browser. Try
  specifying 0 padding and margin 0, if you do not already have.

  --
  Ghizlaine

• The specific question about the placement of an image into text.

  Hello, I had a question about the placement of an image into text.

  I did the contours to create text to place the image inside. My text is 5 words and two lines inside the box.

  When I do create contours he gives me 2 transparent route separate layers for the top and the bottom line.

  How will I be able to do that in a single layer of compound to place image that expands to the two lines?

  First of all, there are two ways of describing the type. The default value creates anchored objects. You want a separate object, so hold down the Option/Alt key when you create outlines. Drag the new contours to separate the text block.

  It is useful to open the layers panel and view the contents of the layer. You have created a group which consists of two transparent traces. In the layers panel, expand the layer so you can see the structure. Shift-select the two transparent traces. (Make sure that the group is not selected.)

  

  Then choose object > tracks > make a compound path. This makes the two transparent tracks into one. Then, you can place or paste into the single compound path.

• Re: Several questions about the recovery of the Satellite L750 features

  I have several questions about the recovery of Satellite L750 features available to it. Any help and answers would be useful.

  (1) when I started the laptop first, he asked me to create a recovery CD incase I need to reinstall the operating system. But he also said that he built in the recovery partition, so therefore, I have to make a recovery cd or not?

  (2) will be the recovery CD is exactly the same as the recovery on the system partition?

  (3) is the partion of CD or recovery includes all the integrated software pre-installed with the laptop?

  (4) also in the device manage management it shows watch partion recovery but it is empty, is it true?

  (5) in the second partition (drive D) system, he has a record with what looks like the recovery of files and folders. Is it safe to move/remove it?

  Hello

  I'll try to provide answers:
  1 - to ensure that everything works perfectly you don t need these discs, but if something goes wrong with the HARD drive you will not be able to do anything. When you have the recovery DVDs, you will still be able to install the recovery image and once again the factory settings. So my advice to you is: create these discs as soon as possible. Use only on DVD-R media and buy products of high quality (TDK or Verbatim).
  2 - Yes.
  3 - Yes.
  4 - No. Don t be confused with this.
  5. in a first time create restore DVD, and later you can do what you want. I put t know which files mean you but don t touch anything before that of the recovery disks to be created.

  In the past, many people have been experimenting with the structure of HARD drive and partitions and later was surprised when installing disk recovery HARD has been damaged. Don t make the same mistake.

  If you have any other questions you are welcome.

• Questions about the terms and conditions

  Dear team of Adobe Stock,

  I am considering a subscription for an e-commerce site that I am developing. I have a few questions about the terms and conditions:

  3.5 social media use. You can view or download an unmodified version of the book on the Social media Site if (A) you include a notice of copyright in the work itself (© author name - stock.adobe.com) and (B) the terms of use governing the Social media Site do not include any provision that would grant exclusive rights or the ownership of those works or alterations to anyone. "Social Media Site" means a website or application that puts the main emphasis on facilitating social interaction between its users and allowing users to share content in such social interaction

  What I have to insert in each post on social media on behalf of the author? Generally, this information is displayed only for free images. What I have to insert this information even if I signed up for a plan?

  Thank you

  Hello

  Please see the link below for help:

  http://wwwimages.Adobe.com/content/dam/ACOM/en/legal/servicetou/Adobe-stock-additional-ter ms_20160119.pdf

• A few Questions about the advanced Actions window

  Hello

  I have a few questions about the progress of the Actions (using the version of track CP7)

  1. What is the function of the action to "continue?"   Out of the peak action and advance the playback cursor?

  2. What does mean this comment "Nested calls to action advanced is a nice improvement."? Is the advanced decision at the top of a page of action tabs?

  3. What is the function of the option "custom" in the IF statement - "preform action if - custom", it doesn't seem to do anything for me?

  4. where can I get information about the timeline / playhead interaction with advanced actions, i.e. where the playhead is going again at the beginning of the slide. slide custom question - display button, e.g. verification of responses, comments - when all the objects are at the beginning of the timeline. I'm looking more for the read head of infromation functionality rather than how to implement this type of question.

  Thank you

  Donal.

  Continue: If an advanced standard action is triggered by a button, this will not trigger the playback head. If you want out, you can use continues. Continue can also be a choice in a conditional action, when one orders branching has nothing to special, but in advance. Continuous is also the "dummy" statement/command (this is the official name of a line in the dialog box advanced actions) If a statement has become unusable due to some reasons, it will be replaced by continue

  There is no nested call stocks advanced possible right now, one of my many feature requests. It would be sort of a subroutine that you can use over and over again, instead of having to create each time when necessary.

  A decision is one of the conditions to be an advanced conditional action. They allow to create more complex actions, as a loop or arrays are not possible. All decisions are executed in sequence and always.

  Custom: is a combination of or but it is rather limited, because you cannot use parentheses.

  I guess you'd better visit my blog if you want to learn more about the advanced actions.

  http://blog.lilybiri.com/

  I also did several Webinars on stocks advanced, last this afternoon (on the sharing of the actions) for Adobe. They are all available on request.

  Lilybiri

• Questions about the export of PDF with India CS5.5

  Hey all,.

  A few questions about the export to PDF of the most recent version of India.

  First of all, I noticed it seems to take much more time to access a PDF file. Any suggestions about how to speed up the process? It took 8 minutes to generate a PDF low resolution (for printing) of a document of 24pp with placed images and vector graphics. Wow, that's a long wait, especially for evidence.

  Second, the background task... If I get it will make this PDF of 8 minutes and then more work on the document, which is exactly in the PDF? Usually, I have save before making a PDF or printing. Thus, the latest version is saved which will be in the PDF?

  (Either incidentally, this ability to work on the doc while generating a PDF file seems kind of weird. Generally, we do a PDF for proofing, or even for printing, when any changes have been made and that everything is "final". Therefore, I see no advantage in being able to work on my document while it is making a PDF file, I am probably once your revisions for the moment. I must say that I like the progress bar that you get when you perform an interactive PDF, as you know that you can not work on the document when it is on the screen...)

  Thank you as always.

  Good, people. Wanted to just follow this and post my results. It turns out that the problem is somewhere in the Illustrator file. I never had the time to guess what work plan was the culprit. Other India files PDF files is transparent and not a lot of time.

  No resolution, unfortunately, just good to know that it is not all India files on my system. Phew!

  THANK YOU for your advice.

• Questions about the update of the related .ai files

  I have two questions about related images.

  (1) sometimes when I make changes to an .ai file, the InDesign document will automatically update the image as soon as I save changes in Illustrator. In other words, I do not need to update the link in the Panel links ID.  Other times, however, the link will not update, and I have to click the yellow triangle next to the image in the links Panel to see the changes. Is there a reason why this is happening and is there an easier way to update images as the links Panel. In Quark, I could simply double-click on the image, and a dialog box asking if I wanted to update the image. This isn't a big problem for me, but I thought I'd ask.

  (2) every time I make a change to a file .ai, the image linked in InDesign always re-scales, and I can't understand why he's doing or how to stop it. For example, I placed a bar graph in Illustrator in a fitted frame and sound + x and + values there. He settled on a scale 100% and I will not change that. Then, I had to make a change to a text label on the chart, making the slightly smaller chart. When I updated the link in InDesign, it has been resized to 118.12%. I had to get into the x field + sign in the command bar and type 100% to get back to the level it was before.  Is there a default setting that I have to uncheck to disable this feature? If not, is there by chance a simple combination of keys that will allow me to re - scale the image quickly?

  Thank you in advance for your help!

  1. looks that you sometimes select art or thename of the link and choose "Edit original" and sometimes you just need to open art and make changes. If you say that the ID to change original it updates to the Save.

  2. There are two options, depending on version, for the behavior of repeat and scale. In CS5 (and CS4 if I remember correctly), you have the choice between them in the preferences in previous versions, it is one or the other, depending on the version. One option is to preserve the dimensions, which is wha'ts that happens to you. The other is to keep scale. Exactly how to preserve the dimensions behaves depends on it, too much on the cropping options you have used when you place the .ai file. If you cropped to aret or encompassing, for example, change the size of the art or to remove a point wandering affect art or the bounding box, but of culture media would not change.

• A few questions about the difference between the Satellite P70, L70, S70

  Hello, I have a lot of questions about the P70, L70, S70 series that come with a 1920 x 1080 panel.

  (1) what are the differences between the L70 and S70 series? With the exception of the RAM and HARD drive capacity, books seem pretty identical.

  (2) P70, L70, S70 doesn't support a 2nd HARD drive or it's just the P70 series that support?

  (3) all the three (P70, L70, S70 series) come with the same TFT panels?

  (4) of the above series, which supports mSata?

  (5) all the model of each series are delivered with support from mSata? For example, it could be that L70 - a - 13 m supports mSata is not the case of the L70-a-146?

  (6) all the foregoing, are delivered with a S - ATA II or III S - ATA interface?

  (7) who is the best of these series listed? I'm trying to understand what makes the big difference of S70 to P70 except for the envelope for example.

  Thank you in advance.

  > (1) what are the differences between the series L70 and S70? With the exception of the RAM and HARD drive capacity, books seem pretty identical.

  What models Sat L70 and S70 do you mean exactly? There are different L70-xxx-xxx and S70 models on the market that supports different hardware specifications.

  (> S70 2) P70, L70, support a 2nd drive HARD or is - it just the series P70 that support?
  As you can see in this [Sam P70 HDD replacement document, | http://aps2.toshiba-tro.de/kb0/CRU3903II0000R01.htm] the P70 series supports the 2nd drive Bay HARD, BUT even if there is a 2nd HARD drive Bay, this does not mean that you can use the 2nd HARD drive. In the case where the 2nd HARD drive Bay are equipped with HARD drive connector, you can use the 2nd HARD drive

  I also found the [Sam L70/S70 HDD replacement | http://aps2.toshiba-tro.de/kb0/CRU3703HG0000R01.htm] the document on the Toshiba page and there I see this 2nd HARD drive Bay is not available

  (> 3) all three (P70, L70, S70 series) come with the same TFT panels?
  See point 1). Different P70, L70, S70 models were equipped with different material parts.

  (> 4) of the series above, which takes in charge mSata?
  As far as I know that some P70 models are equipped with an mSATA SSD of 256 GB.

  (> 5) do all the model of each series are delivered with support mSata? For example, it could be that L70 - a - 13 m supports mSata is not the case of the L70-a-146?
  See point 4) not all models supports the same hardware specifications

  (> 6) all of the above, come with a S - ATA II or III S - ATA interface?
  I don t think that SATA III is supported. I guess it would be SATA II

  (> 7) which is the best of these series listed? I'm trying to understand what makes the big difference of S70 to P70 except for the envelope for example.
  Not easy to answer because there are too many models released in Europea.
  And not all models are available in each country. So I guess you will have to look for the models that have been released in your country.

• A few questions about the upgrade on Satellite A300-144

  Sorry for the typos, English is not my mother tongue.
  I want to ask some questions about the upgrade of a300-144.

  * Some info first.*

  CPU: T2370 ([http://ark.intel.com/products/34445/Intel-Pentium-Processor-T2370-1M-Cache-1_73-GHz-533-MHz-FSB]).
  Chipset: GM965 ([http://ark.intel.com/products/29821/Intel-82GM965-Graphics-and-Memory-Controller]).

  * Questions.*

  1. my frequency of laptop memory at 533 MHz, supports 667 MHz memory controller, memory modules can work at 667 MHz. Is - this because CPU FSB 533 MHz frequency and new processor at 667/800 MHz FSB will fix it or it is hardcoded in the BIOS?

  2 Intel said that the size of max memory for my chipset is 4 GB (2 x 2 GB), but Toshiba says that only 2 GB (2 x 1 GB), who is right?

  3 I know, taken of my CPU is μFCPGA-478 aka socket P, max FSB 800 MHz, max 35 W TDP, so T9500 ([http://ark.intel.com/products/33918/Intel-Core2-Duo-Processor-T9500-6M-Cache-2_60-GHz-800-MHz-FSB]) is a compatible processor or there are some limitations in the BIOS?

  > 1. My frequency of laptop memory at 533 MHz, supports 667 MHz memory controller, memory modules can work at 667 MHz. Is - this because CPU FSB 533 MHz frequency and new processor at 667/800 MHz FSB will fix it or it is hardcoded in the BIOS?

  The speed of the memory is related on the material. This means that the FSB is responsible for the limitation.
  If the FSB would allow support 667 MHz then the memory would also at this speed.

  > 2. Intel says that the size of max memory for my chipset is 4 GB (2 x 2 GB), but Toshiba says that only 2 GB (2 x 1 GB), who is right?
  The memory depends on the chipset. So if the chipset supports 4 GB of RAM, you should be capable of this move to 4 GB of RAM

  > 3. I know, my CPU is? FC-PGA-478 aka socket P, max FSB 800 MHz, max 35 W TDP, so T9500 (http://ark.intel.com/products/33918/Intel-Core2-Duo-Processor-T9500-6M-Cache-2_60-GHz-800-MHz-FSB) will be a compatible processor or there are some limitations in the BIOS?

  It might be possible that the new processor would be fully supported by the BIOS, but in most cases it should not be a problem if the chipset would support the new processor.
  But as far as I know the upgrade of the CPU is not supported by Toshiba or any other manufacturers of portable and its your own risk to run laptop with the new processor.