Questions about the implementation of Site Catalyst in FLEX

Similar Questions

• Questions about the implementation of clusters of storage and DTS on active cluster

  I have a few questions about the implementation of clusters of data store and SRS storage in VSphere 5.1.

  We have a data center with about 15 HP blades and a few servers non-lame.  The hosts are all either VSphere 5.0 or 5.1.  Our back-end storage is an EMC VNX 5700 with about 20 stores of data.  All the VMWare is managed by VCenter 5.1 running on a dedicated physical machine.

  Currently, each data store is used individually; No piles of data store are put in place.  When a new virtual machine is created, the administrator usually chooses the data with the most space store.  Periodically, we will go back and manually storage vMotion machines to balance the load.

  Recently, we have expanded the VNX storage, so we now have LUNS in different pools, with different levels of performance.

  What I would do is set up for the data store clusters, so that us when a virtual machine is created, the administrator must not know what data store is in which pool.  Also take advantage of the DRS storage so that the burden of storage will be "refine" himself a little.

  I know the setting up of a cluster of storage in a 'clean' environment is quite simple, but my concern is creation/conversion data warehouses existing in active production in the cluster, while they are used.

  If I access the screen "data warehouses and store data from clusters ', right-click on the data center and create a cluster, and then move the various data stores in the new cluster, will there be an interruption in the production running systems?

  I also wonder about activation of storage i/o control.  It is not currently enabled on data warehouses.  I know it's useful for the StorageDRS, but will be allowing any negative impact on the system?  If I turn on the warehouses of data, is there anything else I should do or set in addition to all that allows him?

  Finally, we are in the process of Site Recovery Manager configuration.  SRS has an impact on the configuration of the data clusters and DTS store?

  Thanks in advance for your comments.

  Mike O.

  Gregg Robertson wrote:

  Hello

  Clusters of data and using DTS store doesn't impact RS even if you create a cluster of data store for storage of replicated data and another for everyone else, this way you machines virtual you want to replicate are not moved on warehouses of data that are not replicated , but will still have the ability to move if there is a conflict.

  Gregg

  With all due respect but SRM and DTS don't go together. SRM does not at all support the use of DTS. So if you are configuring SRM forget DTS for now.

  Reason for this is that SRM knows no DTS and VMs can be in flight when a failover should occur, and bad things can happen. Also, the protection breaks when a virtual computer is moved between data warehouses in a cluster data store.

  In short: don't go there.

• Question about the implementation of VLAN automatic voice with Polycom phones on a SF 300 - 24 p

  Someone at - it Setup successfully a SF 300 - 24 p to automatically assign a VLAN voice for traffic from an IP of Polycom phone? We have activated with LLDP-MED policy assigned to the port, as well as the interface configured as a trunk with the PVID defined on the VLAN data and Auto VLAN enabled.

  Hello

  Thank you for using the Cisco support community. My name is Nico Muselle and I work for Cisco Small Business Support Center.

  In response to your question, the only additional thing required on your switch is the choice of one of the below configurations:

  1. Affect the phone VLAN statically to ports connection of phones.

     or

  2. Turn them on Vlan voice (and change CoS affecting 5), and add telephony YES Polycom phones (the first 3 bytes of the MAC). You may need to add a few different Yes. This way the switch detects the phone YES and add the switchport to the Vlan voice.

  LLDP-MED network strategy as you have defined it, on the other hand, will be used to assign the VLAN on the phone automatically if you do not have to configure it manually on all phones.

  In short, you can choose one of the methods above, in combination with the LLDP-MED policy so everythings should work just fine. If it is not, please let me know.

  Kind regards

  Nico glacier
  Cisco Small Business Support Center.

• question about the implementation of button

  Hello

  I am a beginner in labview. I'm now designing a program with the game and stop switch. When you press on the piece, the system starts and the play button becomes disabled. This is active when you press the stop button. How can I achieve it. It seems easy but difficult for me. If discouraging.

  Thank you

  Jessie

  Hi Jessie,.

  Use the Structures of the event to make user interactive vi.

  Click on link of thise.

  http://zone.NI.com/DevZone/CDA/tut/p/ID/3331

  Rgds,

  Vinciane

• A question about the implementation of a "Comments" link

  All-

  My goal is to put a link "Send feedback" at the bottom of each HTML page generated by HR, to solicit comments from user on the content. I found very little on this subject. This page, the blog "I'd rather written" in 2007, recommends adding a script as follows:

  document.write ("< a href =" mailto:[email protected]? subject = request % 20Name % 20 ("+ document.title +") % 20%20File:%20"+location.href+" "> feedback < /a >" ");

  It looked promising. (Mais il garde de me donner un Expecting») ' error when I use the button 'Search' in the master page. (The scripts link does not appear in the published page footer). However, in the script, the parans are balanced: two left, then right two.

  Any help would be appreciated.

  Thank you.

  -kt

  Found the solution here:

  http://www.Grainge.org/pages/snippets/mailto.htm

  THX.

• Questions about the stores in iProcurement

  All,
  
  I have a few questions about the implementation of iProcurement stores-
  
  1 oracle comes seeded with 2 stores "Backend" and "Exchange.Oracle.com. We do not have the use of these stores. I don't see an option to turn them off. Is it advisable to delete them? They occupy unnecessary space and are seen first. I read this on Metalink Note ID 429470.1 - "NOTE: while the value can be changed, it is highly recommended to not under any circumstances ever remove"Main store"page stores to manage content in iProcurement catalog administrator responsibility.» Do not know why.
  
  2. we have a Punchout for Dell U.S. catalog store and a catalog of information for Dell International. Buyers of Dell are iProcurement to each punchout to place their orders from Dell for the USA (shopping cart returns to iProcurement) - or - just use the store Dell International to go to an external URL and place their orders here (who do not return to iProcurement). What we see is - when the user clicks on the icon Dell us, it is taken directly to the URL of the PunchOut of Dell, but when he clicks on the Dell International icon, he was first taken to the list of catalogs available to the store (only 1 available catalog) and the user must then click again on the link Dell International. Is there a way to configure the Dell International icon to behave the way behaves in the Punchout icon - i.e. directly take the user to the Dell page without a need to show the list of catalogs.

  Hey,.
  To answer your Questions
  1. you can always delete those either if you want to... The reason why the link Meta Notes say not only not to delete the main store is
  i. because main store has all of the Local content in iProcurement (i.e. If you have any installation of items in the inventory you and them Module iProcurement Enabled (IE can be purchased at iProcurement) and any other article of local catalogues/categories Loaded using the BULK LOADING in iProcurement is also removed.)
  II. you can always delete the information Exchange Oracle store if you do not use.
  I would advise so do not remove the main store. Instead, you can change the sequence of the display of the stores you iProcurement Page.
  Browsing ==> Internet shopping Catalog Admin (RESP) ==> eContent crib ==> content management ==> stores ==> press the update sequence and make sure that the sequence number for main is superior to any other store so that the hand store falls last in the House of iProcurement Page

  2.i don't think that there is no option to do this. but you can always open an SR with Oracle about it and ask this question\

  hope that answers your Question.

  Thank you
  SANTU

• How can I change my HTTPS thing, so it isn't always pop up and ask questions about the sites Web secure when I play some games?

  Feel free to change the title

  How can I change my HTTPS thing, so it isn't always pop up and ask questions about the sites Web secure when I play some games?

  You're talking about Facebook?

  Try the gyration of the Secure Browsing

  http://www.Facebook.com/help?page=1079

• I am currently working on a site that has the integration of Paypal which includes the page redirects (confirm or cancel). My goal is to have the implementation of site with a layout for desktop, Tablet and phone. My question is when I have a redirect pag

  I am currently working on a site that has the integration of Paypal which includes the page redirects (confirm or cancel). My goal is to have the implementation of site with a layout for desktop, Tablet and phone. My question is when I have a redirect page should I create a separate provision of the page for each device or just a provision of office that fits all three screen sizes? I hope that if the html page has the same name of the device (query) is automatically detected. Help with the help of Adobe Muse CC

  By Payal integration, you mean paypal html button? or etc payment gateway configuration? If this is a configuration of the gateway to your site domain name then a single page with any structure will work, but if you use the button code for all associated formats then you will need to create separate pages for all.

  Thank you

  Sanjit

• Question about the strength of password

  (do not ask questions about the recovery of the password, so please do not report this thread)

  OK, I heard that the virus can change the password on a computer.

  But if you have a password very complicated (for example, one with a lot of numbers and other things), it will be more difficult/less likely for the virus to be able to change your password?

  Yes.  A strong password is, it is more difficult to crack.  For more information, see create strong passwords on the Microsoft online safety site. Boulder computer Maven
  Most Microsoft Valuable Professional

• Person to contact with questions about the presentation of the app world

  If I have a question about the app that I submitted, anyone knows how do I contact someone about this? I can't find anything on the site and respond to notification emails gets me nowhere.

  Hey miss breeder,.

  that will be tough. If you browse the App World his hell out there because of the new development forums and people have a lot of problems with it. I've read people were emailing RIM all week and no responses were received. But if you post a question here MShom (one of the moderators) usually responds in a timely. The support email is [email protected] I believe. Good luck!

• Recently bought a laptop computer; A few questions about the offer Upgrade to Windows 8

  I have a few questions about the Upgrade of Windows 8 offer for new computers.  I recently bought a Toshiba Satellite S855-S5268 of amazon.com, which came with Windows 7 Home Premium.  Toshiba already has a beta version of drivers and utilities for Windows 8 for the S855 on their Web site.

  (1) I bought my laptop in July of this year, and I've not yet registered for 8 Windows Upgrade offer with Microsoft.  Am I still eligible to receive the upgrade, if I sign up soon?
  (2) if I buy the upgrade through this offer, I'll be able to download an ISO file so I can burn the installation media, or do I need to upgrade to Windows 7?
  (3) if I will be able to burn the installation media, I'll be able to erase my hard drive and do a clean install of Windows 8 (which I'd rather do, I have a lot of backups of my data).  I am aware that I would probably need to provide my product key Windows 7 Home Premium 64-bit OEM during the new installation, because it is an upgrade and not a full version; This isn't a big deal, because my Windows 7 Home Premium 64-bit OEM product key is stuck at the bottom of my laptop.
  (4) my current copy of Windows 7 is activated by seeing my BIOS (I have a traditional BIOS, not a UEFI).  If I had to switch to Windows 8 and decide then I'd rather back in Windows 7, for example, a few months later, I'll be able to do that (I burned recovery of Windows 7 with the Toshiba utility disks, which I did), and Windows 7 will continue to activate by seeing my BIOS, even after the installation (and later remove) Windows 8?
  Thank you very much!

  I have a few questions about the Upgrade of Windows 8 offer for new computers.  I recently bought a Toshiba Satellite S855-S5268 of amazon.com, which came with Windows 7 Home Premium.  Toshiba already has a beta version of drivers and utilities for Windows 8 for the S855 on their Web site.

  (1) I bought my laptop in July of this year, and I've not yet registered for 8 Windows Upgrade offer with Microsoft.  Am I still eligible to receive the upgrade, if I sign up soon?

   

  Yes, the registration period is between June 2, 2012 to January 31, 2013.

  (2) if I buy the upgrade through this offer, I'll be able to download an ISO file so I can burn the installation media, or do I need to upgrade to Windows 7?

   

  Yes, the Upgrade Wizard of Windows 8 will allow you to create a bootable DVD or you can grab the ESD file and save it.

  (3) if I will be able to burn the installation media, I'll be able to erase my hard drive and do a clean install of Windows 8 (which I'd rather do, I have a lot of backups of my data).  I am aware that I would probably need to provide my product key Windows 7 Home Premium 64-bit OEM during the new installation, because it is an upgrade and not a full version; This isn't a big deal, because my Windows 7 Home Premium 64-bit OEM product key is stuck at the bottom of my laptop.

   

  Yes and there are better ways to reinstall Windows 8 without using the installation disc, you can use the reset and refresh.

   

   

  These steps will take you through refreshing your PC:

  · Press the Windows key + C on your keyboard to show the charms (if you use a touch screen: touch the right edge of your screen and drag your finger to the left)

  · Click settings

  · Click change PC settings

  · Click general in the left column

  · Under refresh your PC without affecting your files, click Start

  Then follow the instructions that will be provided on-screen to cool your PC.

  (4) my current copy of Windows 7 is activated by seeing my BIOS (I have a traditional BIOS, not a UEFI).  If I had to switch to Windows 8 and decide then I'd rather back in Windows 7, for example, a few months later, I'll be able to do that (I burned recovery of Windows 7 with the Toshiba utility disks, which I did), and Windows 7 will continue to activate by seeing my BIOS, even after the installation (and later remove) Windows 8?
   
  As long as you have a recovery disk which you should create or use the construction in the recovery partition, Yes, it will self activate.
  Thank you very much!

• Questions about the terms and conditions

  Dear team of Adobe Stock,

  I am considering a subscription for an e-commerce site that I am developing. I have a few questions about the terms and conditions:

  3.5 social media use. You can view or download an unmodified version of the book on the Social media Site if (A) you include a notice of copyright in the work itself (© author name - stock.adobe.com) and (B) the terms of use governing the Social media Site do not include any provision that would grant exclusive rights or the ownership of those works or alterations to anyone. "Social Media Site" means a website or application that puts the main emphasis on facilitating social interaction between its users and allowing users to share content in such social interaction

  What I have to insert in each post on social media on behalf of the author? Generally, this information is displayed only for free images. What I have to insert this information even if I signed up for a plan?

  Thank you

  Hello

  Please see the link below for help:

  http://wwwimages.Adobe.com/content/dam/ACOM/en/legal/servicetou/Adobe-stock-additional-ter ms_20160119.pdf

• Hello, I have a few questions about the affiliation of creative cloud

  Hallo,

  I have a few questions about the affiliation of creative cloud:

  1. There is an Adobe offer up to 27.11. : the price offered is 47.59 euros per month including MWSt (VAT) or €568,20 / year.

  For what is this offer period/how many years valid?

  2. after the period of the offer, the membership will cost the standard-price: €59,49 / month or €713,86 / year (seen on the Adobe Web site).

  For how many years this standard - the price is fixed?

  Is the standard-prices include MWSt. (VAT) too?

  Thank you

  Thomas

  Hello

  I advise you to contact Adobe sales for queries on pricing.

  Contact us | Adobe

  Kind regards

  Sheena

• a few questions about the migration of content/web content

  Hi all
  
  
  I have a few questions about the migration of the website and content (from development to test) which are not specified after reading the oracle documentation.
  
  -> When we make the site replication will be migrated content (data files).
  
  -> when we move will contained all the ED and RD etc (any object type web site migrated).
  
  --> are the two the necessary step for migration when we migrate web site.
  
  
  Thank you
  
  -Yves

  --> When we make the site replication of the content will be migrated (data files).

  It depends on how you do it. The tool 'Site Studio Replicator' won't move any content, only the structure of the site. The 'Manage replication Site' page can be used to migrate content with the structure of the site but I do not recommend for large sites, I use separate tasks to archive to move the content. "Backup and restore" page stores the entire site in a ZIP file, not advisable for large sites.

  --> When migrate us content will be all ED and RD etc (any object type web site migrated).

  Yes. It uses the metadata xWebsites field to identify the elements that belong to the site.

  --> are the two the necessary step for migration when we migrate web site.

  Depends on how you do it, but yes, all bits are needed.

• A few Questions about the advanced Actions window

  Hello

  I have a few questions about the progress of the Actions (using the version of track CP7)

  1. What is the function of the action to "continue?"   Out of the peak action and advance the playback cursor?

  2. What does mean this comment "Nested calls to action advanced is a nice improvement."? Is the advanced decision at the top of a page of action tabs?

  3. What is the function of the option "custom" in the IF statement - "preform action if - custom", it doesn't seem to do anything for me?

  4. where can I get information about the timeline / playhead interaction with advanced actions, i.e. where the playhead is going again at the beginning of the slide. slide custom question - display button, e.g. verification of responses, comments - when all the objects are at the beginning of the timeline. I'm looking more for the read head of infromation functionality rather than how to implement this type of question.

  Thank you

  Donal.

  Continue: If an advanced standard action is triggered by a button, this will not trigger the playback head. If you want out, you can use continues. Continue can also be a choice in a conditional action, when one orders branching has nothing to special, but in advance. Continuous is also the "dummy" statement/command (this is the official name of a line in the dialog box advanced actions) If a statement has become unusable due to some reasons, it will be replaced by continue

  There is no nested call stocks advanced possible right now, one of my many feature requests. It would be sort of a subroutine that you can use over and over again, instead of having to create each time when necessary.

  A decision is one of the conditions to be an advanced conditional action. They allow to create more complex actions, as a loop or arrays are not possible. All decisions are executed in sequence and always.

  Custom: is a combination of or but it is rather limited, because you cannot use parentheses.

  I guess you'd better visit my blog if you want to learn more about the advanced actions.

  http://blog.lilybiri.com/

  I also did several Webinars on stocks advanced, last this afternoon (on the sharing of the actions) for Adobe. They are all available on request.

  Lilybiri