Questions call Z2

Hello people I got my new Z2 Tuesday and im pretty impressed with it so far

only real issue im having is a call the other day, the other person happened to come through really clear to not be able to hear them at all and said that I sounded very bassy sometimes this has not really reproduced itself a lot and others said I look pretty clear, but when receiving calls that the other person seems quiet a lot I did all the required updates

so, this could be just a problem of network/signal or it would require a return to the shop?

Try this

Settings > call settings > mic noise suppression

Tags: Sony Phones

Similar Questions

Questions: call vi dynamically using vi Server

I have a few questions about the next vi.

1. is there a better way to determine at run time whether a vi is part of a generation or not?

2. is there a better way to pass values to a dynamic called vi. Or, better yet, a better way to call a vi dynamically?

3. when I run the code as shown above in a generation vi does not actually open. It opens fine when it isn't a building. However, when I call the vi dynamically and activate the vi down right, 2 windows will pop up, the dynamics and the other. Clues as to what is happening here?

You did it ensure that your disabled VI is listed as VI to be included in the build specification? If you do not, when the VI is built in a .exe, the block diagram to disable and the VI it contains are probably be stripped of the .exe

Cisco SX 20 past question call composition

Hello team,

Hello team,

We use Cisco SX20 and configured the public Ip address,.

We can receive the call for outside call but not in outgoing call, I tried several public IP address for the test, but none of them does not.

There is no guardian, address Public Ip directly to the configuration system.

Please suggest the same

Thanks in advance

Are Set - up mode set to 'Direct' call and you specify H.323 call Protocol?

/Jens

Please note the answers and score the questions as "answered" as appropriate.

Question calling a function

Hi all
I have a function that takes a lot of time when its appeal of a direction select in a view. The display of lines 156K and other joins table query, the query result is about 66K.
The query without the function takes 0.5 seconds, but with the function takes an eternity, here is my example:help with statistical plan.
I replaced this part I have several ii.index with the function as:
Sum ((ci.ilo_cost/1000) * pl.degradation * fs.) Ask * pc.total_count * fn_get_inflation (ci.req_id, pc.FY, 2)) AS PR_TR_Cost,
Here is my function:
```
create or replace function fn_GET_INFLATION(v_req_id in number, v_fy in number, v_rate_type in number) return number is
  Result number;
begin
  select cr into Result
  from (
    select lkp_inflation_rate_type_name, lkp_inflation_rate_type_id, fy, calculated_rate cr
    from lkp_inflation_rates join lkp_inflation_rate_base using(lkp_inflation_rate_base_id)
    join lkp_inflation_rate_type using (lkp_inflation_rate_type_id)
    join requirement using (req_id)
    where req_id = v_req_id
    and fy between fydp_startyear and (fydp_endyear + 2)
    model
    partition by (lkp_inflation_rate_base_id)
    dimension by (row_number() over(partition by lkp_inflation_rate_base_id order by fy) rn)
    measures(fy, rate, lkp_inflation_rate_type_name, lkp_inflation_rate_type_id, 0 calculated_rate)
    rules(calculated_rate[any] = nvl(calculated_rate[cv()-1], 1) * (rate[cv()] * 0.01 + 1))
  )
  where fy = v_fy
  and lkp_inflation_rate_type_id = v_rate_type;
  return(Result);

  exception when no_data_found then
    Result := 1;
    return(Result);
n_GET_INFLATION;
```
Is there something wrong with my function?
Can I use the function in a different way in the opinion? I have to create a procedure and use the slider?
Any ideas?
Thank you!

Hello

Whenever you have a question, please post a small example data (CREATE TABLE and only relevant columns, INSERT statements) for all of the tables involved and the expected results of these data, so that people who want to help you can recreate the problem and test their ideas.

Explain, using specific examples, how you get these results from these data.

Always say what version of Oracle you are using (for example, 11.2.0.2.0).

See the FAQ forum: Re: 2. How can I ask a question on the forums?

Calling even the simplest of SQL user-defined function slows the SQL statement.

It seems that this function is not the simplest user-defined function. You can do much of the work even appealed to the other.

These two are the reasons why you may get better performance if you could do what you need to do in pure SQL. I bet as you can, because the function is essentially just do more SQL. If nothing else, you could do exactly the thing as a scalar subquery.

License question - calling the constructor

Hello

I have developed an application using Measurement studio 2013 Pro WPF and just went from 4.5 to 4.0 framework. I followed the steps described in the following document:

http://forums.NI.com/NI/attachments/NI/232/14673/1/using%20.NET%204.0%20Measurement%20Studio%20Assem...

In step 6, it says that I should update the license file manually. On the other hand, this document states that I can use the built-in tools to update the file:
http://zone.NI.com/reference/en-XX/help/372636F-01/mstudiowebhelp/HTML/licensingnetwithoutintegratio...

In any case I tried to perform the update by using the built-in tools. I followed the steps described in this document:

http://zone.NI.com/reference/en-XX/help/372636F-01/mstudiowebhelp/HTML/licensingnetwithintegration/

The project compiles, but I get the following runtime error:

A 'System.Windows.Markup.XamlParseException' type first-chance exception has occurred in PresentationFramework.dll

Additional information: "calling the constructor on type"NationalInstruments.Controls.PowerButton"that matches the constraints of binding specified threw an exception." Line number 92 ' and the line of position 22 '.

A type 'System.Windows.Markup.XamlParseException' unhandled exception has occurred in PresentationFramework.dll

Additional information: "calling the constructor on type"NationalInstruments.Controls.PowerButton"that matches the constraints of binding specified threw an exception." Line number 92 ' and the line of position 22 '.

Unhandled exception: 'NoLoadTest_Test.exe': loaded 'C:\Windows\Microsoft.NET\Framework\v4.0.30319\diasymreader.dll', cannot find or open the PDB file.

System.Windows.Markup.XamlParseException: "calling the constructor on type"NationalInstruments.Controls.PowerButton"that matches the constraints of binding specified threw an exception." Line number 92 ' and the line of position 22 '. ---> System.ComponentModel.LicenseException: NationalInstruments.Controls.Internal.WpfStandardLicenser is unlicensed.

at NationalInstruments.Restricted.LicenseBase.ShowUnLicensedBehavior (Type type, object instance)

at NationalInstruments.Restricted.LicenseBase.a (String A_0, A_1 Object, Type A_2)

at NationalInstruments.Restricted.LicenseBase.a (Type A_0, A_1 object)

at NationalInstruments.Restricted.LicenseBase.RunTimeCheck (Type type, LicenseContext context, object instance)

to NationalInstruments.Restricted.LicenseProviderBase.GetLicense (context, type, object, Boolean allowExceptions instance Type, LicenseContext)

to System.ComponentModel.LicenseManager.ValidateInternalRecursive (context LicenseContext, Type type, object, Boolean allowExceptions, license, license, String & licenseKey instance)

at System.ComponentModel.LicenseManager.Validate (Type type, object instance)

to NationalInstruments.Controls.Internal.WpfStandardLicenser... ctor (Type licensedType)

The license file is empty after I selected the license for the Refresh project file.

Can you help me please?

Kind regards

/ Axel

Ok thank you

/ Axel

Noob question: call the new Menu screen

Hello.

I have two screens. The first is called myScreen and is defined in a class file called plotter.java. It works very well. It has a menu that also works.

What I want to do is to launch a new screen called windshield which is defined in windscreen.java. I tried to do it with the following menu item code, but it does not compile because it does not recognize the windScreen() method:
```
private MenuItem menuWind = new MenuItem("Set Wind", 1, 1)
{
    public void run(){
        pushScreen(windScreen());
    }
};
```
What I am doing wrong?

P.S. My apologies for the basicness of this issue, you can tell I'm new to the Java/BlackBerry development.

Try this,

Windshield wn = new windScreen();

UiApplication () .getUiApplication () .pushscreen (wn);

This will help u.

------------------------------------------------------------------------------------

Kudo press to say thank you to the developer.
Also, press accept it as a button when you got the Solution.

Questions call non-Traversal

Hi all

I implement some new devices of telepresence:
Site has
VCS-control (X8.1)
VCS-Expressway (X8.1)
MCU 5310 (4.4)
C40 codec (7.0.2)

Site B
(7.0.2) codec C20
The site has different subnet

I have enabled H.323 & SIP on the VCS - C and tested several calls between Site A & b. whenever calls go out H.323, SIP, or SIP to H.323 from the C40 for the C20 or vice versa, that there is no problem. Both sites receive video and audio.
Whenever I force the same protocol. That is to say, H.323 to SIP for SIP or H.323 and making the same calls, the site B (C20) is not video of the Site (C40). However the C40 receives both video & audio of the C20. What is interesting, is that if I do the same calls of the MCU, which is also in Site A, then there is no problem. So the problem is between the C40 and C20.
Since I'm not physcally on sites because I do this execution remotely, I can count only on the stats I get from the GUI. I have attached a photo taken of the customer from the screen of the C20.

Calls:
Calls crossing
C40 - C20 H.323 - SIP - call ok
C20 - C40 H.323 - SIP - call ok
C40 - C20 SIP - H.323 - call ok
C20 - C40 SIP - H.323 - call ok
MCU - C20 H.323 - H.323 - call ok

Non-Traversal calls
C40 - C20 H.323 - H.323 - no video received the C20
C40 - C20 SIP - SIP - no video received the C20
C20 - C40 H.323 - H.323 - no video received the C20
C20 - C40 SIP - SIP - no video received the C20

This suggests that there is only a problem on the C20 in non-traversal calls. I don't want to use licensed traveled between these 2 points of termination.

Thank you for your help. Any input would be greatly appreciated.

-Greg

When you make an H323, SIP call, all media is 'mandated' by the VCS, so they would still work even if they cannot ping each other. When you do a non-traversal call, media flows directly between the endpoints.

Ping a C-Series, connect to the codec via SSH (same credentials as the Web browser), and then type systemtools network ping 10.1.1.1

Where "10.1.1.1" is the IP address of the remote end point.

JavaScript question calling location.href
Hello

I'm calling a function javascript to the click event of a command button.
function test1() {}

Alert ("Simple alert");
Location.href='/context/faces/test';
Window.Location='/Context/faces/test';

}

The redirect does not work the method here. If I Uncomment alert in the method and accept the alert from the rediredirection that happens. Someone tell me the issue here? Is there another way to have the redirect using javascript?

Thank you
Bastien
Yes, that seems correct (I wanted to say in the case of page 2, back to page 1). You use a binding of the ADF, and if so, what are the conditions of discount for the iterators on page 1?

John

Date Format question - calling a procedure stored on the side of java
What is the best approach to managing a DATE as a parameter to a procedure?

(1) the emp table has a column called hire_date and its data type is DATE.
(2) the procedure has tried to retrieve all employees hired on a specific date, there is a parameter called p_hire_date, type what data it should use? Something like p_hire_date IN emp. HIRE_Date % TYPE? < == is that correct?
(3) both within the body of the procedure, during the recuperation of registration,
SELECT first_name, last_name
FROM EMP
Where hire_date = p_hire_date < == is that correct? or when should I use to_date()?

(4) on the coast of Java, when you call this procedure, what data type the hire_date is?

Thank you
new2Oracle
Hello

Procedure seems correct, do not use to_date.

Switch argument as a java.sql.Timestamp.

(Or java.sql.Date If you are absolutely certain that you DATE of Oracle is a component "hour")

Concerning
Peter

El Capitan USB question

Hello Apple,

Since the upgrade to 10.11 'el Capitan' several of my USB devices does not work properly, which up to now worked perfectly. To name only a few, these include the eBook reader Sony PRS - T3, AVR, ST-Link2 programmer, FT232 programmer (sometimes). In addition, VirtualBox and Parallels, which I use frequently, have questions calling for USB devices. Apparently I'm by far not the only one, as revealed by a quick search on the internet, for example
Common to all these pages share the conclusion that the issue was introduced by Apple with 10.11 and that until this Apple support could not answer - at least in a useful way. And the advice to wait for the driver updates is not always an option for me the two for reasons of time or because support for example, PRS - T3 has been abandoned altogether.

To sum up: there are a lot of people and equipment who have a problem of USB introduced El Capitan. The problem persists for some time now and there is no support by Apple, or at least a statement how they intend to solve. This is the shit!

I'm a Mac user since the days of--oh, I don't know even the name of the model! And above all, I was very satisfied. But I must say that lately I wonder if that faithfulness is well spent. For me (and others) crucial things that worked perfectly before now fail and apparently Apple cares.

Think again, Apple...

A dissatisfied customer

I have the same problem with USB: I have a cam action by Garmin, which had functioned normally before the El Capitan 10.11. No it was not acknowledged more. Using the DMESG command in the terminal, when the cam is connected to the USB port, I get this feedback:

002223.783219 HS01@14100000: AppleUSB20XHCIPort::resetAndCreateDevice: unable to create the device, disabling port

It really a mess and I don't understand WHY Apple has not solved this problem despite of El Capitan 10.11.03 was last updated. I really get off at Yosemite. But really I couldn't think that apple were so unprofessional!

call a .obj from a dll file

Greetings!

I have a question calling a function in a .obj file (running specifically) in a .dll file.

At present, it will load the obj file and get a valid (non-NULL) pointer to the function, but then I get a general protection fault when I try to call the function. If I mouse over the function pointer, the address is valid (although not NULL anyway) but the name of claims "unknown function.

I guess I'm not to expose the functions available in the obj file correctly, but the United States of __stdcall seems to make no difference.

It is new territory for me, so do not assume that this isn't something obvious that I'm just missing!

Any help is the aprpeciated

First of all, your code looks correct. This leads me to think that it is perhaps a question Data Execution Prevention (DEP). The mechanism of LoadExternalModule/GetExternalModuleAddr was developed long before DEP has been poured, and it happens in time (for LoadLibrary/GetProcAddress). If you go into system settings Advanced window, it has a button for the Performance parameters. Click on that and it will bring up some tabs, which is Data Execution Prevention. Set it to "Turn on DEP for programs Windows and services only," restart the computer, then try your program.

I realize that even if this solves your problem, it may not be not possible to ensure that the DEP is disabled on your program must be running on all machines. Since you're at the point where you have to choose the way of the future, I highly recommend that you try to replace the static lib with a DLL. Certainly, a DLL must be related, and it cannot directly access the functions and variables in the program; This can make it difficult to adapt the code of the existing static lib. However, if it really is a separate logical element, it should be possible.

A. Mert

National Instruments

Fishy (or hook?) The audit service call

Hi all

I ordered a Ultrabook earlier today. A few hours later, I received a call from a (clearly outsourced) call centre, claiming to be Dell. When I confirmed my name, he asked if I had done any Dell purchases recently. Yes. Then he asked me to confirm my address, I did, without giving to the city or zip. When I asked him what was the call, he said that each order is personally checked before shipping. I have never experienced this.

He then asked if I was a student and he wanted my .edu email. I asked why it was necessary, and if it was some kind of discount for students. He said: "No, the .edu email is necessary to check the charge of the customer." Wait a second. How to help an e-mail student to check a charge, especially as it was not the email I used when ordering? How a same email vaguely related to the validity of a charge?

He even said, "If you will just please check the .edu email, I won't have to ask more questions." What? A the student email is the end of the line for verification?

I should also mention that the laptop was ordered for my boyfriend. Since he is out of town, he instructed me on what to do by phone, using his name and credit card, with my email, because I manage all of our finance and cash receipts. I TOTALLY understand why this seems bit precision and may need verification. I explained the situation and offered the telephone number of my boyfriend, because he would be able to confirm its own information and that I wasn't using it to order something for me.

The appellant has said, 'no, all that is needed is your student email." I explained to him that that the enamel is in no way connected to the card and is not necessary to check anything, but I couldn't see the harm (if it would end the call), so that I set out for him. He got frustrated because he repeatedly recalled it me evil and says in a fit of anger, "I'll take number of your boyfriend now."

I hope that I was not rude to a true Dell employee and I don't give any vital information, but seriously, this guy was horrible. He did very bad justifying why he needed no information, and none of it seemed logical to me in the circumstances. Dell training is extremely poor, or there is a person who uses the name of Dell for dubious purposes. Given the General gloom with verification service Dell found all over the internet and the number of questionable calls and emails Dell, clients received on checking, I would say it could be either. Whatever he is, he certainly doesn't make me not wanting to always order from Dell again.

Is anyone from Dell can confirm if it is a standard procedure or not? My impression is that you stopped outsourcing because of the poor quality of the customer service.

Hi sumaphelia,

It's normal to get that call. Dell reference verifies that you have actually ordered this item and the credit card has not been stolen.

Reference Dell outsources again, but the American customer service is available. I hope you and your friend will appreciate your new ultrabook.

Calling the reports of forms in the same session.
Hello everyone:

I have a small question calling reports 6i Forms 6i form:

When I call a report from Oracle Forms 6i with the RUN_PRODUCT command, the report asked running on another session as the appellant formula.

I need call a report but in the same session of calling forms.

is there a way to fix this?

Best regards
Pedro
I need call a report but in the same session of calling forms.

It is not possible. You can use the same user to call the report, but not in the same session. Forms and reports are two different products, so both have their own session. If you just did something in a form and want to make a report that reflects the changes you made, you need to commit these changes in forms first.

CarPlay & numbers with Extensions

Hi all

I have a question calling the phone numbers with extensions when connected to CarPlay. I have a lot of contacts with the extensions and phone numbers include a break and post numbers. Normally when you call these numbers using the phone only, or when you use a Bluetooth headset or Bluetooth in the car, the call connects, then composed the extension correctly to end the call.

When I am connected to CarPlay and make the call through CarPlay, the call connects, but it is not dial and connect to the extension correctly. I even tried to add extra breaks, but it still does not work. Anyone else having this problem and have a solution?

At this point, my only option is to disconnect the connection of lightning to CarPlay, wait for the phone to connect to the Bluetooth in the car, and then make the call using Bluetooth. It defeats the purpose of having CarPlay first.

I use CarPlay in a Honda Accord from 2016 with an iPhone 7 running IOS 10. I had the same problem with my iPhone 6 s 9 IOS running.

Update: genius of Apple confirmed this bug and asked newspapers to this question that I downloaded. If all goes well, they will have a fix in a future version of IOS 10. I'll give another update when I hear anything.

122tu 15 - ac: what Linux/window operating system fully support my computer hp laptop 15 - ac 122tu

Hello

I have buy new hp laptop 15-ac 122tu product: N8M18P #ACJ. I got the install window 7 32 bit but faces many problems of pilot. Now, I want to know what linux or other OS is compaitable with this modal which contains all the drivers and software required. Please tell me OS version also directives about the facility.

Thank you

It came with FreeDOS, obviously. 32-bit Windows was not a good choice because of the unavailability of the driver and you have equipment that needs to run a 64 bit OS. There is no operating system that will "just work" without any configuration and drivers required. Windows 7 64 bit and more can be implemented with this site downloads and there are so many Linux distributions, it is impossible to discuss together and how to install them. Personally, I use Kubuntu and they just introduced 16.04 (Xenial) Long Term Support which would probably fit with very little after installation system requirements:

http://cdimage.Ubuntu.com/Kubuntu/releases/16.04/Release/Kubuntu-16.04-Desktop-AMD64.ISO

This says AMD64, but is also for Intel 64 bit compatible processors which is yours. Download and use a burning program to create the file .iso image on a DVD-ROM finished installation disc and boot from it. Follow the prompts on the screen. If you install Kubuntu only default options works perfectly.

Let us know if you need more information. Your question calls for a test answer the length of a novel but we'll take it at the same time.

Questions call Z2

Similar Questions

Maybe you are looking for