questions form to another session...

Similar Questions

• A way of questioning the content of a TWG populated by another session?

  Is it possible to query the contents of a global temporary Table, populated by another session?
  
  in other words, if:
  -a global temporary table named MY_GTT was created, it was once
  -Meeting A inserted lines in MY_GTT and has issued a COMMIT
  -Of the session is B possible at the session of A query MY_GTT mode?
  
  Is it possible to do if process A has not committed as a result?
  
  It is only for diagnostic purposes - is that we would need to scale or to automate.
  
  Thank you
  Mike

  Is it possible to query the contents of a global temporary Table, populated by another session?

  Directly, no.

  But you can write code that session is to share data with session B via:
  -an ordinary table
  -DBMS_PIPES
  -external file

• Question form

  Hello

  I'm using numbers on a Mac and have a question form.

  Basically, I trade the Forex market. A particular strategy, due to the volatility on the graph 4 hr and the range of prices around my entry level, I have 3 entry levels and 3 separate stops.

  In the column A is the pair, for example, it could be GBP/JPY or USD/JPY. Each pair has its own characteristics, volatility and spread, so the size of the stop and the position of the trades are different to each other.

  Before entering the trade I have enter the price of the trade in the B column, and then enter the size of the judgment in column H and after I pressed enter, all of the columns between the two levels of trade of 2nd/3rd and the position of 3 stop price are calculated. These price levels, that I use to Cross Ref orders waiting or create limit orders.

  The formula is the same throughout the rank, I know how to set that upward, that I don't know or even know if it's possible, set the numbers so that it identifies the currency pair are get calculated and so use the appropriate values already predetermined that is unique for each pair? Otherwise if I can't do it, I'll just have some separate tables for each currency pair.

  I hope that this is explained well, his bit of a hardening. Thanks for the help in advance.

  Graeme

  Hi Graeme,

  Are the values of each pair, or are they specific to each of the currencies and calculated from the values to apply to the pair?

  If they are predetermined for each pair, has a lookup table containing a possible list of currency pairs in the column, then each of the values predetermined in the following columns can be used here.

  The values could then be extracted using VLOOKUP, or a combination of MATCH and INDEX.

  If they are predetermined for each currency, replace "currency" for possible "par" and "currency" for 'currency pairs' in paragraph 2 above.

  A table of model listing currencies and the sample values would help in the composition of a formula to adapt to the situation. You can get general information about the functions listed above in the browser functions. Select a cell any on a table, type = to open the browser functions, then enter the function name in the search box to bring up a description (with examples) for each function.

  Kind regards

  Barry

• E-mail account do not send or receive e-mail. ' - ERR [IN USE] account is locked by another session or for maintenance, try again. »

  Account: ' pop.charter.net (2) ', server: 'pop.charter.net', Protocol: POP3, server response: '-ERR [IN USE] account is locked by another session or for maintenance, try again.', Port: 110, secure (SSL): no, Server error: 0x800CCC90, error number: 0x800CCC92

  original title: refuses to send/receive e-mail

  Well, you can't always believe them.  Try to remove your e-mail account, and then verify that you do not have interference antivirus (see www.oehelp.com/OETips.aspx#3) then compact and repair the database of WinMail (www.oehelp.com/WMUTil/) and add your account back once again and see if that makes a difference.  Also, make sure that you are checking in not too often (like every 2 minutes) for mail (Tools |) Options).

  Steve

• ERROR LOCKING line seems to have been inserted in AD_ADOP_SESSIONS by another session

  Hi all

  Previously, I tried to apply a patch. During the process, there was a network error.

  I tried to reapply the patch by using this command: = phase prepare, apply, finalize, commissioning, clean jobs = restart 18620668 = yes

  Unfortunately, adopted out with status = 1 (failure)

  It's my data from the environment:

  EBS 12.2.4

  Database version 11.2.0.4

  OS: Oracle Linux 6

  adopscanlog-latest = Yes command output:

  Directory/u01/install/APPS/fs_ne/EBSapps/log/adoption/33/scan...

  /U01/install/apps/fs_ne/EBSapps/log/adop/33/adop_20150727_070102.log:

  ---------------------------------------------------------------------

  #(202-206) lines:

  ADPATCH logs directory: / u01/install/APPS/fs_ne/EBSapps/log/adoption/33/cutover_20150727_070102/DEV1_spaderp-dev1-app/log

  [PROCEDURE] Race: options adpatch /hotpatch, interactive nocompiledb = no = no console only = no workers = 1 restart no = no = abandonment Yes defaultsfile=/u01/install/APPS/fs2/EBSapps/appl/admin/DEV1_patch/adalldefaults.txt patchtop=/u01/install/APPS/fs2/EBSapps/appl/ad/12.0.0/patch/115/driver logfile = cutover.log driver = ucutover.drv acp = yes

  [UNEXPECTED] Error occurred during execution of CUTOVER.

  [UNEXPECTED] Implementation phase completed with errors/warnings. Check the log files

  #(204-208) lines:

  [UNEXPECTED] Error occurred during execution of CUTOVER.

  [UNEXPECTED] Implementation phase completed with errors/warnings. Check the log files

  [STATEMENT] Phase SHIFT END TIME: 27/07/2015-07:08:18

  [PROCEDURE] [EARLY 2015/07/27 07:08:18] Unlock sessions table

  /U01/install/apps/fs_ne/EBSapps/log/adop/33/finalize_20150727_070102/DEV1_spaderp-dev1-app/adzdshowlog.out:

  -----------------------------------------------------------------------------------------------------------

  #(517-521) lines:

  3451979 05:15:37 00:00:00 ad.bin.adop absorbent of PROCEDURE [START] lock on the sessions table

  3451979 05:15:37 table 00:00:00 ad.bin.adop STATEMENT locking ad_adop_sessions spaderp-dev1-app with interval of 60 seconds and the number of trials 2

  3451979 05:17:37 00:02:00 AD_ZD_ADOP. LOCK_SESSIONS_TABLE error: impossible to acquire the lock on the table to ad_adop_sessions.

  3451979 05:17:37 AD_ZD_ADOP 00:00:00. LOCK_SESSIONS_TABLE ERROR in line LOCK seems to have been inserted in AD_ADOP_SESSIONS by another session

  3451979 05:17:37 00:00:00 ad.bin.adop ERROR cannot execute the SQL statement:

  Hello.

  Bashar and Krishna,

  Thanks for your replies. I solved this problem by referring to the document and steps as breakfast by Oracle Support:

  Search for 0) locked sessions

  Select * from ad_adop_sessions where EDITION_NAME = "LOCK."

  (1) ad_adop_sessions backup:

  create the table ad_adop_sessions_bkp in select * from ad_adop_sessions;

  delete from ad_adop_sessions where adop_session_id = and EDITION_NAME = "LOCK."

  commit;

  (2) unlock the session:

  Start

  AD_ZD_ADOP. LOCK_SESSIONS_TABLE('spaderp-dev1-app',60,2);

  end;

  /

  (3) back up and delete the table APPLSYS. FND_INSTALL_PROCESSES;

  (4) restart adoption phase = failover and update the result

  5) next steps follow this document --> after applying the AD/T2K patches on 12.2.0, adoption phase = failover is a failure on startup of Apache OSH - time (Doc ID 1952008.1)

• table update, cancel the change, another session could ' get value changes in 10g

  Edit data in a table, then advanced to change its original value. In general another session could get changed by advanced in select value but it not work. After the "starting strength" I can get it.

  I did this test in 11.2.0.3 and I get the value without the "starting strength". Who can tell me why? Thank you very much.

  ORACLE 10.2.0.1, OS rhel5.4 x86_64
  
  session1:

  SQL > create table ty (name varchar (20));

  Table created.

  SQL > insert into ty values ('XXXX');

  1 line of creation.

  SQL > commit;

  Validation complete.

  SQL > update ty set name = "YYYY";

  1 line update.

  SQL >

  session2:

  change cancel

  Select

  INDX,

  ktuxesta,

  ktuxecfl,

  ktuxesqn,

  ktuxesqn envelope #.

  ktuxescnw scnW,

  SNCB ktuxescnb,

  ktuxerdbf dba_file,

  ktuxerdbb dba_block,

  nub ktuxesiz

  Of

  x$ ktuxe

  where

  ktuxesta = 'ACTIVE '.

  ;

  KTUXESTA KTUXECFL KTUXESQN # SCNW DBA_FILE DBA_BLOCK NUB SNCB WRAP INDX

  ---------- ---------------- ------------------------ ---------- ---------- ---------- ---------- ---------- ---------- ----------

  263 ACTIVE NO 4 4 0 736229 5 59 1

  BED > define dba 5,59

  S/N 0X0140003B (5,59 20971579)

  BED > find/c XXXX

  File: /oracle/oradata/ora10/undotbs02.dbf (5)

  Block: 59 Offsets: 1361 in 1872 Dba:0x0140003b

  ------------------------------------------------------------------------

  58585858 0000000c 00480020 001 0002 001300e2 00000000 01000000 010000e2 c

  0000000b 01140008 0401003 b fd070000 00000086 fd070000 a 00400101 002, 0086

  00000019 0de30277 00000000 00000000 00000000 00000004 016d18bc 9c0a0000

  2a 000010 0000005 00170004 002b 0000 00400101 9c0a00ba 80000075 0e4000b9 b

  0e4000ff 12058102 0000002c 0000002f 00070600 00040001 00000002 c1170180

  01800778 72021315 162e0180 0180000c 00180010 001 0002 00150005 02000005 c

  02000000 00000000 0000000b 01133000 00040002 016d18bc 2a00003b 00400101

  002e0008 10400001 12058101 00000065 00090700 00070002 0000002c 104000ff

  00000001 80018001 80018001 8002c 109 07787202 1315162e 0000000c 00180010

  001C 0002 00150005 02000005 02000000 00000000 0000000 01132f00 00040002 b

  016d18bc 2a00003b 00400101 002f0007 10400001 104000ff 12058102 0000002c

  00000037 00090700 00070002 00000002 01800180 01800180 07787202 c10e0180

  1315162e 0000000c 00180010 001 0002 00150005 02000005 02000000 00000000 c

  0000000b 01132e00 00040002 016d18bc 2a00003b 00400101 002c 0007 10400001

  104000ff 12058102 00000036 00090700 00070002 00000002 c10e0180 0000002c

  01800180 01800180 07787202 1315162e 0000000c 00180010 001 0002 00150005 c

  < 32 bytes per line >

  BED > d/v s/n 1361 offset 5.59 County 10

  File: /oracle/oradata/ora10/undotbs02.dbf (5)

  Block: 59 Offsets: Dba:0x0140003b 1361 to 1370

  -------------------------------------------------------

  58585858 0000000c l 0048 XXXX... H

  < 16 bytes per line >

  BED >

  BED > change/c Davis dba 5,59 1361 offset

  WARNING: the content of previous BIFILE will be lost. Move forward? Y (Y/N)

  File: /oracle/oradata/ora10/undotbs02.dbf (5)

  Block: 59 Offsets: Dba:0x0140003b 1361 to 1370

  ------------------------------------------------------------------------

  44444444 0000000c 0048

  < 32 bytes per line >

  BED > sum dba 5,59 apply

  Check file 5, block 59 value:

  current = 0x0c0a, required = 0x0c0a

  BED > d/v s/n 1361 offset 5.59 County 10

  File: /oracle/oradata/ora10/undotbs02.dbf (5)

  Block: 59 Offsets: Dba:0x0140003b 1361 to 1370

  -------------------------------------------------------

  44444444 0000000c l 0048 Davis... H

  < 16 bytes per line >

  BED >

  session3:

  SQL > conn / as sysdba

  Connected.

  SQL > alter system flush buffer_cache;

  Modified system.

  SQL > alter system flush shared_pool;

  Modified system.

  SQL > conn ty/ty

  Connected.

  SQL > select * from ty.

  NAME

  --------------------

  XXXX

  SQL >

  SQL > startup force

  ORACLE instance started.

  Total System Global Area 285212672 bytes

  Bytes of size 2020192 fixed

  83889312 variable size bytes

  192937984 of database buffers bytes

  Redo buffers 6365184 bytes

  Mounted database.

  Open database.

  SQL > conn ty/ty

  Connected.

  SQL > select * from ty.

  NAME

  --------------------

  DELALANDE

  SQL >

  In 11g

  Oracle OS: RHEL X86_64 6.2 11.2.0.2

  session1:

  SQL > select * from test;

  NAME

  --------------------

  XXXX

  SQL > update test set name = "YYYY";

  1 line update.

  SQL >

  session2:

  SQL > /.

  KTUXESTA KTUXECFL KTUXESQN # SCNW DBA_FILE DBA_BLOCK NUB SNCB WRAP INDX

  ---------- ---------------- ------------------------ ---------- ---------- ---------- ---------- ---------- ---------- ----------

  343 ACTIVE NO 1288 1288 0 1738249 3 242 1

  BED > set s/n 3 242

  S/N 0X00C000F2 (12583154 3 242)

  BED > find/c XXXX

  File: /oradata/oradata/ora10/undotbs01.dbf (3)

  Block: 242 Offsets: 5741 to 6252 Dba:0x00c000f2

  ------------------------------------------------------------------------

  58585858 0000000 c 004 c 0020 0002 001400 010000 00000000 01000000 cd cd 001C

  0000000b 01130008 010000 00014 010e00ed 7d1a0000 00C 000000f2 0c 000000ee

  7d1a0000 530c8b99 861 000000f8 has 0000 00000 00000000 00000004 00C 00d7dbf2

  0de4dbff 7e000005 00200004 c 0500007 01b 00024 012f0000 80000096 861a 0062

  0c 400060 0c4000ff 12058101 0000002c 00070600 00030001 00000002 00db005c

  c10702c1 79640b0b 07018007 14151601 80018016 001d000c 004c 0020 00020002

  00020007 00010001 000000 cd cd b 010000 00000000 01000000 0000000, 01060008

  0c 010000 00014 000000ed 00000090 7d1a0000 7d1a0000 010d00c6 00C 000000f2

  cea43485 861 has 0000 00000 00000000 00000004 8fb30005 0d 000000 00C 000000f1

  001f0004 c 0500007 01b 00024 012e0000 861a 0062 80000082 0c 400060 0c4000ff

  0000002c 12050101 00db0054 000706ff 00040005 00020003 00000001 ff000000

  000600c 1 3f0000c1 610000c 1 16000079 640b0b14 15160080 00000080 0000000 c

  c 004 0020 0002 001400cd 010000 00000000 01000000 0000000b 01210008 cd 001C

  0c 010000 000000f2 00C 7c1a0000 000000C6 7d1a0000 00000090 00014 010c006f

  861a 0000 00000 00000000 00000004 0de4dbff 7e000005 06C 00000065 cea43471

  001C 0004 0500007c 01b 00024 012d 0000 8000006e 861a 0062 0c 400060 0c4000ff

  < 32 bytes per line >

  BED > change the offset of 3 242 s/n/c Davis 5741

  WARNING: the content of previous BIFILE will be lost. Move forward? Y (Y/N)

  File: /oradata/oradata/ora10/undotbs01.dbf (3)

  Block: 242 Offsets: 5741 to 6252 Dba:0x00c000f2

  ------------------------------------------------------------------------

  44444444 0000000c 004c 0020 0002 001400cd 010000 00000000 01000000 cd 001C

  0000000b 01130008 010000 00014 010e00ed 7d1a0000 00C 000000f2 0c 000000ee

  7d1a0000 530c8b99 861 000000f8 has 0000 00000 00000000 00000004 00C 00d7dbf2

  0de4dbff 7e000005 00200004 c 0500007 01b 00024 012f0000 80000096 861a 0062

  0c 400060 0c4000ff 12058101 0000002c 00070600 00030001 00000002 00db005c

  c10702c1 79640b0b 07018007 14151601 80018016 001d000c 004c 0020 00020002

  00020007 00010001 000000 cd cd b 010000 00000000 01000000 0000000, 01060008

  0c 010000 00014 000000ed 00000090 7d1a0000 7d1a0000 010d00c6 00C 000000f2

  cea43485 861 has 0000 00000 00000000 00000004 8fb30005 0d 000000 00C 000000f1

  001f0004 c 0500007 01b 00024 012e0000 861a 0062 80000082 0c 400060 0c4000ff

  0000002c 12050101 00db0054 000706ff 00040005 00020003 00000001 ff000000

  000600c 1 3f0000c1 610000c 1 16000079 640b0b14 15160080 00000080 0000000 c

  c 004 0020 0002 001400cd 010000 00000000 01000000 0000000b 01210008 cd 001C

  0c 010000 000000f2 00C 7c1a0000 000000C6 7d1a0000 00000090 00014 010c006f

  861a 0000 00000 00000000 00000004 0de4dbff 7e000005 06C 00000065 cea43471

  001C 0004 0500007c 01b 00024 012d 0000 8000006e 861a 0062 0c 400060 0c4000ff

  < 32 bytes per line >

  BED > apply sum s/n 3 242

  Check file 3, block 242 value:

  current = 0xae88, required = 0xae88

  BED >

  session3:

  SQL > alter system flush buffer_cache;

  Modified system.

  SQL > conn ty/ty

  Connected.

  SQL > select * from test;

  NAME

  --------------------

  DELALANDE

  SQL >

  SQL > select version of v$ instance;

  Version

  -----------------

  11.2.0.2.0

  SQL >

  Hell _in_memory_undo parameter

• Can I copy or cut a file of muse a high level of the page master form to another?

  Can I copy or cut a file of muse a high level of the page master form to another?

  Hi Graham,

  You can copy the contents and paste them into another file of Muse however copy and paste pages are not supported currently.

  Kind regards

  Akshay

• How to subclass one form to another form?

  Hello

  I want to create a form and must inherit properties, including all controls, triggers, etc. of this form to another form.

  How can I achieve this? Can someone please help.

  1 shape (the shape of the model) create a group of objects e.g. OG1.

  Drag and drop all of the content of the formula 1 you want to subclass the object group.

  Create form drag and drop the object OG1 formula 1 group 2 to form 2, objects will appear in form 2 and be subclassed from Formula 1.

  There are other ways to do it using libraries of objects, or by directly copying the individual elements.

  Rgds
  Tony

• Generate the trace for another session file and change the path

  Hello

  Please let me know how to configure tracing for another session and it is also possible that the trace file can be re-directed to another path than the default path user_dump_dest?

  Kind regards

  VN

  Use DBMS_MONITOR. SESSION_TRACE_ENABLE (and SESSION_TRACE_DISABLE).

  as far as I know, you cannot change the default location of the trace file.

  In a session, you can change its path filename with ALTER SESSION SET TRACEFILE_IDENTIFIER = "";

  Hemant K Collette

• How to pass the value of the element from one form to another form?

  Hi all
  
  I need your help to complete this task.
  I have a form page named reserve form.i have some five fields selection list in the form of reserve, after I chose the first value from the selection list, I create a button in the form of reserve, when I click on the button create, it will open another form page named set form in this form page , I have a field selected, the list of values in configure the form depends on the values selected as a reserve, it means that I have to change the value of page of a form to another form.
  
  Please suggest a solution, how to pass the value?
  
  Thank you
  Robette.

  Check out the button create on Page 8.

  In the Action when the button is clicked, the configuration is

  The value of these P35_IT_PRODUCT
  With these values & P8_IT_PRODUCT.

  Kind regards

• FRM-92101 happens when I open one form from another and then close it.

  FRM-92101 happens when I open one form from another, check something, display a message to the user and exit the screen to the previous shape.
  
  Version of forms: 10.1.2.0.2. Java: 1.6.0_23. Browser: IE6
  
  When I put forward two messages of 'EXIT_FORM', all right and the second form is closed again to the first shape just like I wanted.
  In 9.0 forms, it did not.
  
  It has to do with the fact that I use JRE instead of JInitiator?
  Thank you.

  Take a look by using the built-in NAME_IN forms. You will find the NAME_IN function takes a STRING as parameter. Change your code to:

  IF NAME_IN('SYSTEM.CURSOR_ITEM') IS NOT NULL THEN
     SYNCHRONIZE;
  END IF;
  

  Hope this helps,
  Craig B-)

  If someone useful or appropriate, please mark accordingly.

• Help: How to transfer data from one form to another form form

  Hello:

  I was wondering how / if it is possible to transfer data from form from one form to another form. I create a flow of forms, which are as follows: form of Incident report-> form of risk analysis-> error-> report form decision support survey Standard-> report form of risk control-> form of mitigation-> etc... You get the gist. It would be very time-consuming to constantly transfer the standard who, what, when, where and how from one form to the other. I was wondering how do? I have looked around on the net and this forum and couldn't find a tutorial or a guide? Is this possible with Adobe forms?

  I use a XML schema for the form to preload a list of employees and the standard list information and then publish the form to submit in PDF format for opening and tracking form mobile device. I notice that I can export the data in a form that is distributed in XML but I can't import in a distributed form. I'm a newb with code, but may contain a little of my own.

  An example of how to achieve this with a field name or something would be greatly appreciated! If you need anything, or a copy of the forms let me know!

  Thank you kindly,

  Al

  Hi Al,.

  I have here an example where the data in a single form are 'communicated' to other forms. Please note that there are specific script in each of the forms. It's a work in progress and one day I'll come back make a more polished example: http://assure.ly/qQivbm.

  See also John Brinkman's blog for a different approach: http://blogs.adobe.com/formfeed/2010/07/shared_data_in_packages_part_1.html and http://blogs.adobe.com/formfeed/2010/07/shared_data_in_packages_part_2.html.

  Good luck

  Niall

• Import of provision of one form to another form field?

  I often create forms in English and French. Many are long and complicated, and I have to create them all individually. Is there a way I could use the layout of form of a form field, another form? It would be fantastic.

  Sure. To replace the contents of the underlying page and maintain fields, links, code to the document level, etc., select: Document > replace Pages

  You'll have probably a few adjustments to make to certain positions in the field.

• How to pass the parameter one form to another form?

  Hello
  
  I want to pass the parameter one form to another form called.
  
  What are the steps I want to do.
  
  Please guide me
  
  Iqbal
  
  Published by: Sabrina on July 21, 2010 23:38

  You want to see this link...

  sheikyerbouti.developpez.com/forms/Forms_Parameters.doc

• Add a new ipsec connection to an interface (which work already in another session)

  Hi, guys like tittle says:

  I already have a session running ipsec.

  Now, I need to set up another with a different peer ipsec tunnel and traffic not related.

  Documents mention that it is not possible for re-branded, more than one encryption in an interface card.

  I have only a public interface, so how do you achieve this?

  BTW:

  I need also of course on the config... I can't turn the existing connection.

  Here is my config.

  **********************************************************************************************************

  !

  crypto ISAKMP policy 1

  BA 3des

  preshared authentication

  Group 2

  !

  address of isakmp crypto key [Council] 200.222.222.1

  !

  Crypto ipsec transform-set esp-3des esp-sha-hmac MYTRANSFORM

  !

  MYMAP 10 ipsec-isakmp crypto map

  Description "vpn site to site of my remote"

  defined by peer 200.222.222.1

  game of transformation-MYTRASNFORM

  match address 150

  !

  interface GigabitEthernet0/1/1.10

  encapsulation dot1Q 10

  IP 222.111.1.1 255.255.255.128

  IP access-group 170 to

  crypto MYMAP map

  !

  Extend 150 IP access list

  10 permit tcp host 172.24.3.1 eq 8888 host 172.22.0.1 (2032 matches)

  20 permit ip 172.24.3.0 0.0.0.255 host 172.22.8.16

  30 permit ip 172.24.3.0 0.0.0.255 host 172.22.5.41

  IP 172.24.3.0 allow 40 0.0.0.255 host 172.22.6.160 (64 matches)

  Any help on that would be preciated,

  Thank you!!

  Leo.

  Hello

  Essentially, you use existing map of Crypto

  So looking at your existing configuration

  • Add a new "crypto isakmp policy x" UNLESS the existing matches the parameters of new connections also
  • Add a new "isakmp crypto key" for this new peer configuration
  • Add a new configuration of "crypto ipsec transform-set" , UNLESS the existing matches the parameters of new connections also
  • Add a new ' access-list ' that defines networks the and remote for this VPN L2L
  • Add a new 'MYMAP x ipsec-isakmp crypto map' to the existing one

  If you could add something like this to the existing "crypto map"

  MYMAP 20 ipsec-isakmp crypto map

  Description Connection 2

  defined peer x.x.x.x

  transform-Set

  function address

  In particular note the number used in the foregoing 'MYMAP 20 ipsec-isakmp crypto map'

  So to my rest of understanding of configurations, you add as usual, but for the Crypto map you will need its own number sequence/number/order number.

  Also do not forget to add NAT0 / configurations NAT Exemption.

  Hope this helps

  Remember to mark a reply as the answer if it answered your question.

  Feel free to ask more if necessary.

  -Jouni