questions of iOS 10 wifi

Similar Questions

• Update iOS 10 wifi bars display, why?

  Why the wifi bars do not display now that I upgraded my Pro iPad to iOS 10?

  Hi there ReneeMB!

  Thank you for bringing your question on the bars of Wi - Fi on your iPad Pro not displaying no not after upgrading to iOS 10 Community Support from Apple.  I upgraded my iPad iOS 10 mini too and am happy to help you with your problem.

  You mention that the Wi - Fi connection bars are not displayed, but not be able to connect to Wi - Fi.  I'll provide answers to every situation to help you.

  If you are unable to connect to WiFi after update, I have an article that addresses this issue:

  If your iPhone, iPad or iPod touch connects to a Wi - Fi network

  Quite often it is useful to check if the WiFi is enabled and also flight Mode is on.  To check:

  1. Settings > airplane Mode should be gray (toggled off)
  2. Settings > Wi - Fi must indicate the name of the network you are connected to
     1. If there is no network named beside him, tap on Wi - Fi and make sure that it is green (toggled on)
     2. Under CHOOSE a NETWORK, don't forget the network you want to connect is listed
     3. Tap the network you want to connect, it may need a password
     4. If you can join but still can't connect to the Internet, don't forget to see if other devices can connect
     5. If you can see the network but cannot connect to the Internet you can also power cycle the router (turn off, unplug, wait a few minutes, plug it back it, try to connect to this new)

  If you are able to connect to Internet but you do not see the WiFi bars, we will try to close the iPad and leave:

  Restart your iPhone, iPad or iPod touch

  Best wishes.

• question 4g iOS 9.3

  After install iOS 'new' on my 'old' iOS 9.3 9.3 iPhone 5, I can not connect to the 4G network. But WiFi is OK. Why?

  iPhone 5, iOS 9.3

  It cost telecom operators question...

• After updating IOS 10 wifi does not work on my iphone anymmore 6

  IPhone 6 c

  IOS 10

  after update Wifi makes connections but wifi symbol disappears immediately after the connection.

  functions of the iPad without problems. Reset hardware doent change the problem.

  What could be the problem.

  You must first check your Wi - Fi router: check if other devices can be connected. This will let you know if there is a problem with your Wi - Fi router. You can restart your router and restart the connection to WiFi.

  Make sure that Wi - Fi and you can see your network

  Go to settings on your iPhone > Wi - Fi and check if it is enabled. And if there is a blue check mark next to a network name means that your iPhone or iPad was connected to this network.

  Restart your iPhone/iPad, router, cable/DSL mode

  If this does not help, reset your network

  On your iPhone, iPad, got to settings > general > reset > reset network settings. This will reset Wi - Fi networks and passwords, cell parameters and VPN, and APN settings you used before.

  These measures should help.

• With 5s and 10 IOS iPhone WiFi problems

  Hi, sorry for my bad English. After the update to IOS 10 my WiFi connection is not stored permanently. I often need a new connect to the router and enter the WPA2 key again. My WiFi network is hidden, the SSID is not visible. The problem occurs only on the iPhone the iPhone 5s 6 everything works fine. Someone at - it similar problems?

  My device: iPhone 5 s ME435DN/A

  Greetings jhdd

  Hi jhdd,

  I understand that after updating to iOS 10, your connected Wi - Fi networks previously are not automatically reconnect. I know it's nice to connect automatically to a high-speed internet connection like this automatically to back up your data, so I'm happy to help you.

  Check out our article on troubleshooting connections Wi - Fi here:
  If your iPhone, iPad or iPod touch connects to a Wi - Fi - Apple Support network

  Thank you for using communities Support from Apple. See you soon!

• questions about iOS 10 SMS and iMessage notification

  Hi all

  Having some problems with the SMS and iMessage notification since the upgrade to iOS 10. The problem is that sometimes there is no noise or vibration or anything like that when I get a message. I will just have to pick up the phone and there is a banner on the lock screen. And until someone asks, it isn't that I was away from the phone, or I didn't hear it go off... there was just no notification. It's as if the phone was in DND (which it was not).

  The other thing is, I NEVER receive a notification when I am sent an iMessage from a sender that is the only email address (like an iPad wifi only). In this situation, my phone never plays a sound never vibrates... you open the lock screen, but there's a new banner of message sitting there... as I said before - just as the phone is in DND... which is not.

  This problem happens on mine and my wife's phone. For any help or suggestion would be greatly appreciated.

  Here is an update. I think I can find a solution to the problem. I used to have my "send and receive" in the messages app implemented with my phone number and checked e-mail address. I have deselected the e-mail address and have now received a notifcation for every message I've received so far. The sample size is a bit small at the moment but before this change, it is 50-50 at best.

• 9.3.4's 6 iOS iPhone Wifi turns off when the phone is locked. How to solve this?

  Hey! I have a 6 - iOS 9.3.4 - 16 GB iPhone. My phone WiFi turns off eventually when I lock it... The problem is that I get no notification because of this problem. I'm too lazy to try troubleshooting for this problem, just read a lot of advice, but it had a bad feedback. How would I fix this? Thank you.

  It is not a problem. This is a design feature which is present in all iPhones and all versions of iOS for 9 years. WiFi turns off 30 seconds after the phone goes to sleep to save battery life. If you want to keep it you must connect the phone to the power.

• WiFi-call of iOS. Wifi-favorite game mode.

  As far as I know, the iOS is set to cell-favorite mode for Wifi-Calling.

  Anyone know if it is posible to change this option in Wifi-favorite? Or how suggest Apple to implement this feature in the upcoming iOS versions.

  Thank you

  http://www.Apple.com/feedback/iPhone.html

• Number of antennas router question?  (Several gadgets WiFi using 1 router)

  -My House is a 3 storey 5 bedrooms single family home.  There are 4 people living under his roof and each person has at least 3-4 items wireless who rely on our network domestic wi - fi.  Include wireless iPhone 2 of 6, 3 iPhone 5, 2 iMac (an older and a new one), 1 airbook, 1 MS Surface, 2 older laptops Apple (the old 1 "thick white), 2 iPads, Kindle 1-2, frame 1 photo wireless, 3 printers, wifi, 1 Sony PlayStation4 (via wifi) and much more.

  Our current router is a double (2.5 and 5) and we use them both, and we had recently a technician change the channels, so we are not in competition with the neighbors.  The router signal strength is strong in the home to most of the places.

  My question: with so many features, would be useful to have several routers with multiple antennas to accommodate this request, or made this same question?

  My current router has 3 visible external antennas.  I read that the Airport Extreme has 6 internal antennas.  I'm ready to go buy Airport Extreme, if 3 additional antennas can help, or if I can use two routers for a total of 9 antennas (if this is important).

  Our services to wide band is xfinity and we have one of their fastest options.  Not quite the 105, but about 80.

  Any suggestions?

  Several wireless routers will tend to work better than the Gothic pulpit super multi-antenna a monster looking for router.

  But they all need to be connected with the ethernet.

  Read how to get excellent wireless in your House.

  http://www.SmallNetBuilder.com/basics/wireless-basics/31576-the-best-way-to-get-ensemble-Maison-sans wire-coverage

  External antennas tend to be more effective than internal, but the actual number of antennas is easily overrated.

  Most of the antennas used on routers now are dual band... which means inside the plastic, they have sections for the two bands... If an antenna is really two.

  Our current router is a double (2.5 and 5) and we use both

  Is what model exactly? Of basic etiquette please.

  We had recently a technician change the channels, so we are not in competition with the neighbors.  The router signal strength is strong in the home to most of the places.

  It would have been correct for the first 5 minutes after the technician left the House and then totally out of place. Channel of all the equipment that surrounds you change every day, every hour... maybe every 5 min. While I don't disagree with fixing channel... others would say that it should be left on auto. You gain nothing much at all.

  If the signal strength is good over a 3-storey house, you are incredibly lucky.

  You can't effectively add routers more unless you install ethernet to provide an infrastructure for data streams.

• 9.3.1 iOS updated Wifi problem

  After the update to iOS 9.3 on my iPhone 6s, I am facing problem connecting wifi, iphone is not able to find and connect to a wifi have been the signal strength is low, earlier it used to connect. I also checked with an Android device gets connected so that my iPhone 6s got able to find wifi

  Sandeep Hey,.

  I understand that you have a problem connecting to wireless networks on your iPhone. Let's see if we can get this sorted out.

  Where I'd start following after troubleshooting you have already done, it's reset the network settings. You can do this by going to settings > general > reset > reset network settings and then follow the prompts and you will be good to go. Try that and other options of troubleshooting in the article below.

  If your iPhone, iPad or iPod touch connects to a Wi - Fi network
  https://support.Apple.com/en-us/HT204051

  Take it easy

• Update IOS without WIFI and not with an Itunes client connected (aka want to upgrade with a stand-alone itunes client) is it possible

  I work for an agency after the output of devices in our production environment, the IPad can be connected to wifi or an instance connected to iTunes. I want to update these devices, but as you can see in my first sentence the traditional way is not allowed from a security point of view. Any help would be greatly appreciated.

  Care - Apple IPad Air (1st generation)

  -in the course of running IOS 6.1.6

  -put to update to the current version

  Windows based ITunes (ready to use the version that is never recommended)

  There is a conflict here:

  -or an instance connected to iTunes

  -Windows based ITunes (ready to use the version that is never recommended)

  The second sentence implies that you intend to update via iTunes which is in conflict with the first part.

  What is the problem? You want to update the devices.  You can update without wifi.  There are two ways without wifi: cable ethernet or usb to a computer.

  {It is not a coincidence.  You can connect via ethernet cable.

  connect the ipad to ethernet }

  You must be careful with updates.  You can't go back after the update.  The importance is the iPad to your operation?  You can just buy a new ipad and Exchange once you think you have this work.

  R

• MacBook Pro question mark flashing, no wifi, only own internet connection

  I have a flashing question mark on start up with my MacBook Pro. Through the process of restarting, but it asks me to choose a wifi network. I did not, as my computer has its own internet connection, so can not continue to the next step. Help please?

  If you are connected to internet through being directly connected to a modem via ethernet. You should be able to ignore the WIFI configuration prompt. Have you used the option of disk utility to check the repair or erase the disc? The withdrawal volume. You can also try using command/Option/R for recovery to see if you can use ethernet. I did once and trying to remember how I did it.

• HP Envy 5530 question about Online versus WiFi and access by HP for ink monitoring program

  Hello

  I am new here and also back to the program monthly fresh HPs for the programme of replacement of ink as well, I tried to find the answer to my question but could not.  Then...

  My question is, as I don't have a WiFi router (used for tv, netflix etc. at all hours of the day) to use my new HP printer Envy 5530, and given that I am enrolled in the program of ink, this means that my computer itself must stay online 24/7? Or just have my WiFi on 24/7 gives the printer access, it must be monitored by HP for its ink for the monthly subscription levels to be enrolled in the program of HP ink?

  Thank you

  PhyAnnie

  Hello

  No need to be on 24/7. Whenever you turn on the printer, it will connect to HP Server you set up normally (you can print, scan, and send it to print).

  Kind regards.

• ADF Mobile: question of iOS app development

  I know that I can deploy the same application to iOS by creating a profile of deployment. However, I'm a little confused on this from the tutorials.
  
  So the question is can I develop a Mobile application in the ADF on a windows machine and keep the test on an android device and once satisfied enough to create a deployment profile, and deploy on iOS?
  
  What could be the possible problems?
  
  how it is important to test on a real iOS device during development?
  
  Also emulator iOS runs on the windows machine that I see in the tutorial to install xCode and Mac.

  Hello

  What could be the possible problems?

  the deployment on iOS requires iOS SDK and an example of Apple Developer for the signature. That being said, you need a MAC to create a deployment for iOS.

  how it is important to test on a real iOS device during development?

  As with browsers and big ADF: in theory, everything works the same and the framework takes care of possible platform differences. In practice, especially if you run a business, you want to QA test the application on all platforms, you want to take in charge your request. In the best case, you do not find a problem and everything works as expected. However, if for some reason, there is a difference, you would be happy to have run the test

  Frank

• IPhone 6 questions after IOS 10.0.1

  problems with iphone 6 using IOS 10.0.1

  -opening the app facebook, whatsapp or camera cel just stuck and stop working

  -is too slow.

  -reduction of battery life

  -l'iphone is almost useless after upgrade

  anyone having the same problems? can I make a roll

  Try restarting your iPhone by pressing and maintaining the sleep/wake and home buttons. Then log out of your iCloud account and sign in again.