Queue sends do not

Hi all

11.2.0.3.10

AIX6

Users have problems of queues.

The ask me to stop/start the queue.

But when I stop or start, it would just hang out for a long time

EXEC DBMS_AQADM. STOP_QUEUE (= queue_name > ' SMS.) MERCHANT_NOTIFY_Q');

EXEC DBMS_AQADM. START_QUEUE (= queue_name > ' SMS.) MERCHANT_NOTIFY_Q');

Please help me how to restart it.

Thank you

MK

Hi Reena,

I solved my problem by deleting and recreating the print queue

Maybe I'm not kidding it upward by running a lot of orders. The best way to resolve is to delete and re-create

Thank you

Tags: Database

Similar Questions

  • When I try to reply to an email from the bar send does not appear.

    the button send does not appear at the bottom of a response message.

    Web sites look bad or display differently they should

  • my button send is not put in evidence

    When I send a new email, the button send is not put in evidence and you can't tap to send mail, what is wrong

    When you open a new message of Scripture, the 'Send' button should be moderate or look like it's grayed out and you can not click on it.

    It will not appear as usable until you enter the addresses in the TO field, because without knowing where to send to, it cannot send.

    Therefore, confirm that you have indeed added to/Cc/BCC email addresses.

    So, why is it auto activated when you click on for example: answer?
    Because TO fields are auto-completed.

  • cannot receive e mails, can send but not receive 0n new need a computer to use the old computer for e-mail

    Changed computers from xp to windows 8. Received emails, but now nothing, lost all messages on the new computer. can send but not receive. must use xp computer to check email

    Check the settings of Thunderbird yoru Server

  • "Messenger Service, or the Net send command not working only not on the service remote computerhe.

    Messenger Service, or the Net send command not working only not on the remote computer, despite the messenger service is started "it works only if I restart the service.
    operating system is windows xp
    service pack 3

    Hi Charbel,

    Have you done a recent software or hardware changes to the system?

    This problem occurs because the Messenger service is disabled. The Messenger service must run on the destination computer to activate the NET SEND command.

    Because the service is already started, and you must restart the service, you can try to stop the service, change the startup type to automatic and start the service. Check if it helps.

    Please refer to the article to define the service as automatic:

    Programs or services that use the alerts service or the Messenger service do not work as expected after you install Windows XP Service Pack 2

    For more information, see the article:

    The NET SEND command may not work correctly on a computer that is running Windows XP Service Pack 2

    Hope the helps of information.

    Let us know if you need help with Windows related issues. We will be happy to help you.

  • When I send an email or an attachment it happen as the benefits of discovery as the sender and not my name, how can I change this?

    When I send an email or an attachment it happen as the benefits of discovery as the sender and not my name, how can I change this? his strange huh?

    I never stay connected to my email, I actually get hacked somehow I have change my password often enough

    Hi darenlysne,

    It sounds like you have the email account of incorrect installation and hurt the server info.

    Provide the program that you are using and we can go from there, or contact your ISP.

    B Eddie

  • Mobile Comp CC sending do not file Indesign CC

    Is there a known problem with Comp CC sending only not the files that you have created on an iPad to Indesign CC, even if his shows "sent" in a dialog box?

    Hi Karen,.

    Please check and confirm if you are connected with the same ID of Adobe ID/Email on both places.

    In addition, if you are connected to the same Adobe ID/Email ID then please take a screenshot of the app and attach it here.

    Kind regards

    Sandrine Bani

  • How do you 'unsecured' a document if the original sender does not know how the document became "secure"?  Error message is requesting a password.

    How do you 'unsecured' a document if the original sender does not know how the document became "secure"?  Error message is requesting a password.

    Hi Kris,

    We need password to open the document, there is no way to unlock the pdf without password.

    Kind regards
    Rahul

  • Attempt to test remote multi-VM - error: "the purpose or intended sending is not found" when you deploy the VM

    Hello

    I place the "Layout" section in the ViewPlanner UI correctly according to the user's guide and when I try the provision, I see the following errors in viewplanner.log.

    Please help me with this.  Commissioning is not intervene - although all the settings I've specified are correct and resources such as data store are up and running, and 100% exist.

    2013-11-19 02:56:12, DEBUG 650 commissioning the virtual machines using VC clonings with parameters: {u 'maxvmperhost': u '1', u 'parentvmpath': u'[ECO6-datastore] Win7_sky1_clone_eco6_3 / Win7_sky1_clone_eco6_3.vmx ', u' parentvm': u 'GoldenDesktop', u 'vmprefix': u 'VinodVM', u 'confType': u '0', u 'numofvms': u '1', 'clonetype' u: u '0', u 'reslist': u 'stlrx300s7 - 150.stl.netapp.com', u 'datastore': u 'ECO6-datastore', u 'customspec': u 'sysprep.exe'}

    2013-11-19 02:56:12, 651 DEBUG key: VCserver, value: Skytrain-VC - 02.stl.netapp.com

    2013-11-19 02:56:12, 651 DEBUG key: data center, value: aérotrain 02

    2013-11-19 02:56:12, 651 DEBUG key: VCuser, value: root

    2013-11-19 02:56:12, 651 DEBUG key: VCpasswd, value: ENDZIV

    2013-11-19 02:56:12, 651 INFO get all hosts in VC

    2013-11-19 02:56:12, 687 INFO get all VC data centers

    2013-11-19 02:56:12, 701 INFO get all the resources calculation of VC

    2013-11-19 02:56:12, 728 computing INFO Got from VC resources: {' Skytrain-02': ' vim. "} {ClusterComputeResource:domain - c7 ',' stlrx300s7 - 150.stl.netapp.com': ' vim.ComputeResource:domain - s81'}

    2013-11-19 02:56:12, 729 INFO get all VC clusters

    2013-11-19 02:56:12, 757 DEBUGGING from the thread of provisioning

    2013-11-19 02:56:12, 757 DEBUG key: VCserver, value: Skytrain-VC - 02.stl.netapp.com

    2013-11-19 02:56:12, 758 DEBUG key: data center, value: aérotrain 02

    2013-11-19 02:56:12, 758 DEBUG key: VCuser, value: root

    2013-11-19 02:56:12, 759 DEBUG key: VCpasswd, value: ENDZIV

    2013-11-19 02:56:12, 759 INFO get all hosts in VC

    2013-11-19 02:56:12, 760 INFO back to the State of commissioning: 1000

    2013-11-19 02:56:12, 795 INFO get all VC data centers

    2013-11-19 02:56:12, 812 INFO get all the resources calculation of VC

    2013-11-19 02:56:12, 836 computing INFO Got from VC resources: {' Skytrain-02': ' vim. "} {ClusterComputeResource:domain - c7 ',' stlrx300s7 - 150.stl.netapp.com': ' vim.ComputeResource:domain - s81'}

    2013-11-19 02:56:12, 836 INFO get all VC clusters

    2013-11-19 02:56:13, 031 DEBUG Listehotes prepared for commissioning: [u 'stlrx300s7 - 150.stl.netapp.com']

    2013-11-19 02:56:13, 032 DEBUG, get the host name in the hosts with index lists: 0

    2013-11-19 02:56:13, 032 DEBUG returns the host name: stlrx300s7 - 150.stl.netapp.com

    2013-11-19 02:56:13, 196 INFO uttering 1 complete clones with the VinodVM prefix in the ECO6-datastore data store

    2013-11-19 02:56:13, clone command 196 DEBUG call to create the new clone in storage data ECO6-store: VinodVM1

    Exception in thread Thread-3:

    Traceback (most recent call changed):

    File "/ usr/lib/python2.6/threading.py", line 532, in __bootstrap_inner

    Self.Run)

    File "/ build/mts/release/bora-1229598/performance/viewplanner/Harness/root/view_interface.py", line 67, in the term

    File "/ build/mts/release/bora-1229598/performance/viewplanner/Harness/root/vc_interface.py", line 366, in provisionVMsWithVC

    File "/ build/mts/release/bora-1229598/performance/viewplanner/Harness/root/vc_interface.py", line 993, in makeFullClonesInHost

    File "/ build/mts/release/bora-1229598/performance/viewplanner/Harness/root/vc_interface.py", line 723, makeOneClone

    File "/ build/mts/release/bora-1229598/performance/viewplanner/Harness/root/vc_interface.py", line 649, in getCustomizationSpec

    File "/ build/mts/release/bora-1229598/performance/viewplanner/Harness/root/pyVmomi/VmomiSupport.py", line 515, < lambda >

    File "/ build/mts/release/bora-1229598/performance/viewplanner/Harness/root/pyVmomi/VmomiSupport.py", line 324, _InvokeMethod

    File "/ build/mts/release/bora-1229598/performance/viewplanner/Harness/root/pyVmomi/SoapAdapter.py", line 1159 in InvokeMethod

    vim.fault.NotFound: (vim.fault.NotFound) {}

    dynamicType = < unset >

    dynamicProperty = (vmodl. DynamicProperty) [].

    MSG = ' the purpose or intended sending is not found.',

    faultCause = < unset >

    faultMessage = (vmodl. [LocalizableMessage])

    }

    The harness did not find the spec of customization with this name, from where the error. Please follow the guide of the user create a customization specification in the CR.

  • the queue item will not dequeue

    I have some time that reads just a loop telnet connection data.  Channels fall on this topic and fit into a queue called him telnet.

    I have a separate loop which jumps out of this queue for the treatment of the elements.

    What I find is that there is some channels that get queued, but never stand to be removed.  Here is a screenshot of the enforceable part of the code:

    I put a breakpoint on the line item in the upper loop.  I then start a process that sends 2 channels via the telnet connection.  The upper breakpoint triggers and I see string1 to probe #12.  I still (i.e., click Pause) and I see string2 to probe #12.  Immediately after, the breakpoint around the outdoor structure case hit, but probe #11 has only 2 chain, never of string1.

    Am I not manage these queues correctly?

    Thanks in advance

    It is difficult to debug when you can see a part of the code.

    But your thread queue of telnet is splitting off and going to a third location all the way to the right and between the two loops.  What is happening with the wire of the queue there?  You have an other dequeue?

  • Use the same table queue send two different messages?

    Hello

    We have a reconciliation and an outgoing queue in our database!

    Now, we need to create another message content to send to IBM MQ series, so it's just an outgoing messages (no incoming message!)

    To the exsisting two queues, we have the gateway messages in place!

    I was wondering if I can use the same outgoing queue table and infrastructure Message gateway to send another message charge (contect) to the IBM MQ.

    Don't you think it's possible?

    More info made me know!

    Thanks a lot for your help!


    Hello Louis,.

    first of all I didn't detect something strange or even incorrect - perfect!

    Your questions:

    > 1. have I defind is correct? "multiple_consumers => TRUE);"

    Yes, that's correct. We must define this order to use MGW.

    > 2. I failed: gv_mq_inbound_log_queue: = 'ORACLE.002 ';     part because I have not all incoming messages to oracle, I just sent messages in my case! > Is this correct?

    Yes, that's also OK. Since you're carrying data from AQ to MQ in an outgoing queue. Incoming queue would be

    the other way around. You have configured your MQ as a remote queue (sys.mgw_property ('MQ_openOptions', 16')).

    You wishes to clarify this yet once with your MQ management group if this is correct. You may not know at this stage.

    The alternative would be a local queue (value = 2066).

    You don't show the part for the queue. This should be something like:

    BEGIN

    v_message_text: = p_message_text. GETCLOBVAL().    -using the XMLTYPE as payload type

    v_text_body: = SYS. MGW_TEXT_VALUE_T (NULL, v_message_text);

    v_payload: = SYS. MGW_BASIC_MSG_T (v_header, v_text_body, NULL);

    DBMS_AQ. ENQUEUE (queue_name-online p_queue_name,

    enqueue_options-online enqueue_options,

    message_properties-online message_properties,

    payload-online v_payload,

    -Online v_msgid msgid);

    > 3. The last of them, do you think I'll reach my goal with all these codes? Is that what you think may be missing or... ?

    Yes, you will reach your goal using this code. Try it and tell me what happened.

    Kind regards

    WoG

  • P - Track Application sends do not mail

    I use the P-Track on APEX 4.2.2 application w / gateway Embeded PL/SQL Oracle 11.2.0.2 DB. Whenever I try to send a report by e-mail from the application it says it was sent successfully, however no email is received. Whenever I have check the queue of e-mail APEX I see with the following error messages:
    ORA-29279: SMTP permanent error: 501 5.1.7 address not valid
    I tried "[email protected]" and "apexuser" (valid user of the APEX) format but none work.

    I can send email from APEX successfully but not the application.

    Thank you
    Leighton

    Published by: LeightonLNelson on May 13, 2013 13:11

    In the diagrams with ptrack, I created this function to be called by the apex (I preceded it EBA for that I would easily identify this as part of the apex packaged, applications as they do their code) with the string 'people ': comma-delimited

    create or replace
FUNCTION  EBA_VALIDATE_EMAIL
  (p_email      IN  VARCHAR2
  ,p_domain  IN  VARCHAR2 DEFAULT '@yourdomain.org')
  RETURN VARCHAR2 IS
  lt_emails  apex_application_global.vc_arr2;
  email_string varchar2(4000);

BEGIN
  -- split string into separate addresses
  lt_emails := apex_util.string_to_table(p_string    => REPLACE(p_email,' '), p_separator => ',');
   FOR i IN 1..lt_emails.COUNT LOOP
    if (instr (lt_emails(i), '@')=0) then -- no at sign, so lets append the default domain or the passed domain
      lt_emails(i):=lt_emails(i) || p_domain;
    end if;
    email_string:=  email_string || ',' || lt_emails(i); -- assemble the new list
  END LOOP email_val;
  return substr(email_string,2); -- remove leading comma and return the new list
END EBA_VALIDATE_EMAIL;

    That is to say, entry could be "Joe, [email protected], [email protected], frank, ron" and he'd be back * "[email protected], [email protected], [email protected], [email protected], [email protected]."

    In any apex application, but in this case P-Track, I wrap the page with the function variable in the process of the page where the email is sent, inside the apex_mail_send calls: at Page 20, 37 and 85 - I did not other changes:
    * (this is an excerpt from P20) :*

    declare
   l_clob clob;
   l_message varchar2(4000);
   l_to varchar2(64):=:P20_TO;
   l_from varchar2(64):=:P20_FROM;
   l_cc varchar2(64):=:P20_CC;

begin
for c1 in (select clob001 from apex_collections where collection_name = 'EMAIL') loop
l_clob := c1.clob001;
l_message := nvl(:P20_MESSAGE,'');
l_clob := ''||l_message||l_clob||'';

APEX_MAIL.SEND(
    p_to => eba_validate_email(l_to),
    p_from => eba_validate_email(l_from),
    p_body => nvl(to_clob(l_message),''),
    p_body_html => l_clob,
    p_subj => :P20_SUBJECT,
    p_cc  => eba_validate_email(l_cc),
    p_bcc   => null,
    p_replyto => l_from);

apex_mail.push_queue;
end loop;
commit;

    It of simple and not otherwise very surprising, but it works wonders for us. All of our users are authenticated via ldap, and none of them as owners of AD or otherwise throughout the apps are known as whomever@domain... as anyone. It was a must have, but he also fixed the issue for me is that I think that you are having with the invalid OF not having a domain.

    That said, I also changed the assignment of the: P20_FROM which is view only on this page - either a plsql function body.

    return lower (:APP_USER);

    .. but it could have been forced in the process of the code block too, or otherwise I could have not used a call to apex_mail_send, but my send e-mail feature and enter the APP_USER he... etc. etc. etc. (so many ways to achieve the same result)

  • Impossible to open folders in thunderbird or send messages not sent after that computer (ubuntu) closed all of a sudden while using the program

    I use ubuntu. The computer ran out of battery power and closed while I was using thunderbird. Restart thunderbird later, I found that I could not open folders or send unsent messages. When I close the program, I can't restart it says that thunderbird is already open, but if I use thunderbird killall-9 I tells me there is no thunderbird running process. I checked my profile and there is no lock file or parentlock. Someone suggested the deletion of the database of messages of global reach, but this did not help at all.
    If I am slow in response to questions, please be patient, tonight is my last night with a decentinternet connection - before returning to my African country house where we get 15 KB/s download speeds on a good day.
    Thank you
    Karen

    Do you run a kind of antivirus software on the computer to Ubuntu?

    You have a backup of your profile folder? If not, now is a good time to create a.
    https://support.Mozilla.org/en-us/KB/Profiles-TB#w_backing-up-a-profile

    There could be some sort of corruption in your Inbox folder.
    Try to rebuild the index file in Thunderbird:
    Right-click on the Inbox in Thunderbird, select Properties, and then press the button of the Index to rebuild.

  • Work around for the Ical does not send do not issue invitations

    If I understand the problem, ical will not send an invitation email to someone it detects has an ical account. People don't know they have an invitation or they use Google or Outlook to their calendars. Despite everything, they just don't receive invitations to your meetings. For some reason, Apple does not change the rules.

    I was going to start using my Google Calendar and just invite myself, but I used my Gmail account as my ID for Apple. Ah, the tangled web we weave when we try to be cute with Apple products.

    In any case, I was wondering if anyone had a work around for this problem "iCal don't send invitations." I want just the people I work with in voluntary organizations to get an email with an invitation attached. Has anyone found a way around this? I'm about to go to Evite!

    Thank you

    You can invite people to events using their e-mail address or their name. To invite people by name, they must be in your Contacts application with an email address, or they must use the same service calendar CalDAV or Exchange as you (for example, your company's employees).

    Invite people using window addresses

    1. Choose window > presentation.
    2. Search people, then drag them to the event.

    Send an email or a message for guests

    1. Control-click on the event.
    2. Choose send all guests or Message all guests.

    Add guests to the Contacts

    1. Force or double-click on a click event.
    2. Hold the pointer over a guest, and then click the pop-up menu .
    3. Choose Add to Contacts.If you do not see Add to Contacts, but you do not show Contact card, the guest is already in Contacts.
    4. An apple article is here: Calendar (El Capitan): invite people to events

  • How can I customize the Thunderbird message columns to show the raw sender address (not the full name) and e-mail address "received for" which was used to reach me?

    I find more and more important to be able to see the actual email address of the sender rather than just displaying the name, because they do not usually show a company name - a domain would always be. Is it possible to customize the settings/write a file of script/tweak to add columns of name email & domain raw? When dealing with a number of people from the same company, it is difficult to order or nod thanks to a list of emails to find. I know also that 2 people with the same name to different companies and it is impossible to distinguish.

    Secondly, as an addition of associated column, since a number of e-mail aliases join it would be useful to have a column to display the "received for" part of the source of the message that reveals the real enamel used in the To/CC/BCC, which led to me. Once again can it be twisted or scripted?

    I have programming experience but did not Add ons, and would be open to a proposal which is to create a custom module if adding columns with custom values is possible like this.

    Best regards

    Drew

    This module help you?

    https://addons.Mozilla.org/en-us/Thunderbird/addon/show-address-only/

Maybe you are looking for