Quick question - the bottom of the photoshop window

Similar Questions

• The Photoshop window does not fit on my laptop screen. How do I resize for the small screen?

  The Photoshop window does not fit on my laptop screen. How do I resize for the small screen?

  Photoshop window menu > uncheck and then recheck the setting of the Application.

• just a quick question. the other day my laptop broke, now I'm using a new and I would like to have photoshop here. I have an existing account, but as soon as I connect it tells me that I still have to buy it? Why?

  any ideas of how it is or how I can change this?

  Hi Beatrijis,

  Please check the help below document:

  https://helpx.Adobe.com/manage-account-membership/CC-reverts-to-trial.html

  Kind regards

  Sheena

• The Photoshop window is larger than my screen. Why?

  With 6 CS recently when I open an image in Photoshop it appears in the center of the window with the 0 reading on the sovereign inset from the top a bottom. The problem is that the window is running way below and the bottom of my screen and I can't access the horizontal slider to move the image that I increase its size.  I think having accidentally put the computer in a way that I don't want and can't use.  How can I get that back as it was with the horizonzontal accessible slider?   Robert Hersey

  You can click on the window icon expand? I do not know what operating system you are using, but with Windows, it is in the upper right. Click on and off then a couple and see if that helps. You can also try clicking on the menu bar, drag the window down, grabbing a corner and resize the window, then move it to the top. You can also try setting your monitor at a higher resolution, then you might be able to see the entire screen to resize.

• The Photoshop window size is too large

  How can I make my window size of smaller Photoshop? Currently, whenever I open the window is so large, I can't access anything whatsoever at the bottom of the window, including the clamp and do drag the lower right window of PS. Help, please!

  You need to just click the Green zoom button to adjust to photoshop for your screen.

  

• How can I get rid of the Photoshop window in that my files are rooted?

  all files opened in Photoshop CC are "anchored" or nested in the window called "window of Photoshop? How to break up the relationship, so my files are independent of this window?

  Mind you, 'Float in the window' option will NOT cut that although seemingly independent because, closing the window "Photoshop" - ALL my documents nearby as well. Can you help me?

  In CS6 is down if people miss most cause that they think alphabetically like me. However to all CC did something with it.

  

• Quickly move the maximized window from one monitor to another

  With Vista, is it possible to move a maximized window from one monitor to the other with a single click or via a keyboard shortcut (instead of having to UN-maximize, drag and re - optimize)?  I can't download and install 3rd party applications to achieve.

  Hello j8mcmurtrey,

  I was unable to find a shortcut to perform the action you want. However, you can have a look through the available shortcuts that you is provided through Windows Vista here.

  Hope this helps

  Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Quick question - the highway-C/E support H.323?

  Hi all

  Just a quickie. As we deploy licenses Highway-C/E on the VCS for CUCM, I don't have a great understanding of what license Highway adding only the fundamental operation of the VCS. Someone has posted elsewhere that the highway no longer manages the H.323, but I hesitate to believe. I can understand that the crossing tunnel supported by the highway to CUCM would only be SIP, is t - H.323 registrations and/or H.323 tunnels courses and he so opposed?

  See you soon

  Chris

  Hi Chris,

  MRA (collab-edge) does not require the Expressway-C/E option buttons to apply, you can enable this in a standard VCS - C / E deployment.   You must make an adjustment of the SIP connection to a CUCM trunk which is included in the deployment of MRA (specifically, change the port to listen on the side of CUCM to something other than 5060 or 5061 depending on how you deploy ARM) and point to your regular neighbor area on this new port on the CUCM.

  The keys E Expressway and highway-C are essentially a version of VCS who removes the subareas for recording of endpoints and moves the focus to just a deployment of the ARM.  They exist as part of the packages associated with new deployments of CUCM - BE6K etc. I would advise to join your team account for more information on what this means however.

  The crossing of the area in Expressway - C / E deployments created for B2B (in addition to the crossing Zone of MRA) calls can be activated for H.323 as well.  Usage will be a little different with Expressway-E/C for H.323, you can create areas of neighbor to say routers gateway voice or other devices, but the record would go elsewhere for devices.

  -Jonathan

• Quick question: the database of the APEX can get synchronized with a SQLite database?

  Hi all!
  
  So, I'm an intern and I am applying in the APEX, and there's another student here who made the same request, but then for Android. It uses SQLite as a database (because it is a lightweight database), and I use the database to Oracle 11 g, which is used in the APEX. My request is already hosted online (via oracle.apex.com), so the database is online as well.
  
  Now, I have done some research, but I have never met a useful answer.
  
  Is someone here can tell me if this is really possible?
  As in, can synchronize my Oracle 11 g database and its SQLite database?
  
  Please, just a "Yes, it is possible", or a "no, won't it be able to do' will do. But if you say yes, and you also happen to know how, so any suggestions would be welcome. ;)
  
  I have 6 weeks to know, but I prefer to know in advance...
  
  Thanks for your response!

  Hello

  I think that your question do not relate in any case at the APEX. It is more related to data bases it self and connections.

  This might help
  Creating link to Sqlite db?

  Kind regards
  Jari

  -----
  http://dbswh.webhop.NET/dbswh/f?p=blog:Home:0

• The tracks window moving flex time marker move

  LPX 10.2.4, running I have the main window showing my pieces and, below, the editor, which I currently use for set Flex time markers.

  For some reason, in the last 15 minutes he began to behave differently in a way that has seriously slowed down my work: whenever I changed the position of the marker Flex - either through each dragging methods, either via Undo/Redo - the following two things were different from the usual behavior:

  • the waveform in the window of the tracks do not have a 'ghost' wave form which moved to reflect my drag in the editor, I did not see how the edit line non-sinusoidales wave the other tracks
  • the window of the tracks jumped at the beginning of the partition. He didn't budge from the read head, so pressing space twice more quickly got the rear window of the playhead near where I just changed, but it was confusing.

  This has solved the problem of the window mobile tracks:

  • clicking outside the audio region in the window tracks, to deselect the selected region
  • clicking New in this region to reselect it

  However, I still don't see the ghost waveform by dragging and I have no idea what was causing the odd behaviour.

  If you have any ideas of what could happen, please let me know.

  Sometimes, when the arrange window accurately displays the changes that I made to flex markers in the editing window I change flexible to bend the ground, then again for repeatedly bending and which allows a refresh of the region and flex markers and corrects the flex display in the region.

• Can't see image Simulator in the Simulator window

  I have the eclipse plugin and when I run an app in the Simulator, simulator window appears and it is empty.  I use the Edit-> copy instant camera and then 'paste' in the painting and the image of the phone rises.  I looked around and I can't find another post with this problem, so any help would be appreciated.

  Thank you

  Found my question - the simulator window was open on my secondary monitor.  When moved to the main screen images appeared very well.

  Thank you

• Problems with the PhotoShop workspace [too large to fit the computer screen]

  I'm having this problem with PhotoShop and Acrobat after the recent updates to 2015. My workspace is simply too large to fit on my screen and I can't reduce it.

  Yes, I tried to change my resolution, but this isn't the problem, when it's just these two applications. I've included a screenshot of my Illustrator, updated at the same time, it's perfect. But you see in the screenshot PS tools and everything are so great that they run off the screen! All updates came through the creative cloud. Can anyone help?

  

  

  Menu of the Photoshop window > Workspace > Reset (Essentials)

  If this does not work, Edit > Preferences > Interface > User Interface scaling: Auto/100/200 try 100 or 200

  Gene

• Problem recording - screenshot is not capture the correct window

  Hello

  I work in Captivatre 7 on a Mac and I try to add a record slide to make a tutorial in Photoshop. When I do the screenshot, then finished, it brings back me to Captivate and all the slides have the background of my captivate model rather than the Photoshop window. It is not happened to me before and all parameters are similar - I have used capture screen in Captivate 5 & 6, but not 7. When I went to try the screen capture in Captivate 6 also, it does the same thing. Some of the movements (but not all) are taken into account properly - the text captions are referencing movements associated with Photoshop. Here are some pictures below - orange background is my background model Captivate, and I added some photos of my settings. Any help is appreciated!

  

  Take a look in your library in background to see if there is a bunch of charts of capture are listed.  If there is, then straight catches, that you're just not see them in the views of the slide.  It could be that you have slide master assigned to these slides and the slide master graphics are sitting on the top of the screenshots.

• My scanned image covers the whole window scanning functions.

  I can't highlight and so to finish the scan. The worst is that I tried all the buttons and screen size changes, but nothing works unless terminated the process of photoshop and start again... Any tips?

  Thank you

  Gotcha. Unfortunately, once you scan a photo Photoshop automatically wants to be the active program but her since you opened the software scan a menu of Photoshop, you can't do anything until you close the scanning software.

  The scanning software "should" do a separate window in your taskbar, but your screenshot, I see that it is not. You can see if there is an option in the configuration that will force the software to close after scanning of a picture or scanning software settings. If you have several images to digitize the sound is not ideal, but at least you won't be stuck.

  Another option is to see if you can alt - tab for the scanning interface. This would allow you to do the scanning interface the application enable then you could do something else or close.

  A third option is to double-click the Photoshop window. Because Photoshop becomes the request to activate it, you can resize all the interface that will allow you to click on the scanning software to make it active again. Before you start, that might actually be the best way to approach the problem of scanning. so do Photoshop slightly lower than the top of your screen and the value scan software then it will appear just above Photoshop. This way you can go back between the two programs without having to do a lot of image manipulation in Photoshop.

• Hello! My question is, why so many photoshop is making selection when using the quick selection tool, before that it was unable to myself. Can someone tell me aolucion, please. Thank you!!

  Hello! My question is, why so many photoshop is making selection when using the quick selection tool, before that it was unable to myself. Can someone tell me aolucion, please. Thank you!!

  Hi Axe_Juan,

  Could you please let me know the version of Photoshop installed on your computer?

  Also you want to State as Photoshop not to do a quick selection?

  If so, then head over to the Photoshop preferences, then the performance tab and click on 'Big and flat', restart Photoshop and then use the selection tool.

  If something else, please let me know.

  Kind regards

  Tanuj