Quick syntax question!  Trigger is based on the evolution of the field

Similar Questions

• trigger events based on the current image of the flash animation

  I have a Director with video qt project where are trigger actions based on specific times in the video (movietime and/or duration). I update this project in order to use flash instead of quicktime video.

  To facilitate the development and coding changes minimal if all goes well, I would like to keep this similar functionality, but I can't figure out how to capture the current image of the flash movie sprite.

  Can anyone help? or provide a workaround solution?

  I can't figure out how to capture the current image of the flash movie sprite.

  You were near. Try one of these:

  put sprite("flash").currentFrame
  -- or
  put sprite("flash").frame
  

• Calculate the price based on the field

  Hello

  My apologies, I know it's a very basic question, but I can't understand the correct syntax for the custom calculation Script necessary to produce the total cost in my form (I just received Acrobat Pro today).

  I have the user fill in the quantity field and then I try to set the TOTAL field to calculate the cost by multiplying the quantity by the price of $29. I thought it was simple, like writing a formula in Excel, but it doesn't seem to work that way and I can not find all resources on Adobe.com or online who point me in the right direction. Any help anyone can offer would be greatly appreciated.

  It might be easier to use the option of simplified field notation, in which case you must enter:

  29 * QTY

  If you want to use a custom calculation script, it could be something like:

  Custom calculation for a field text script

  (function () {}

  Get the value of the quantity, as number

  var qty = + getField("QTY").value;

  Calculate the value of this field if the quantity is greater than 0

  If (Qty > 0) {}

  Event.Value = util.printf ("%.2f", 29 * qty);  round to the nearest hundred

  } else {}

  Event.Value = "";   This field blank

  }

  })();

  If this option gives you more flexibility. you to round off and empty the field. You can also perform additional checks to ensure that the amount of sense (for example, a positive integer within a certain range) you can find more information in the Acrobat JavaScript reference, and here is a link to a tutorial introduction on how to set up calculations in PDF forms: https://acrobatusers.com/tutorials/how-to-do-not-so-simple-form-calculations

  Be sure to set the computed fields read-only so that the user does not try to interact with them.

• The default value based on the field from another table to a custom object

  I'm trying to set the default value to a field in the custom object to the value of a field of account. I tried the syntax 50 ways different and just don't get the case. The label for the account field displays the form of s/n, the integration of the tag is ltDBA_ACCT and it appears in the fx reports area as Account.Text_22.
  
  The field of custom object that I am triying update is also called s/n, which was originally the required field 'NAME '. The name of the table, account, should it be included? Do I need a function to the field?
  
  I've updated the external ID using the line with syntex < ID > ID (at least higher ID) so I know that it is possible to define a default value, but s / < n >, < ltDBA_ACCT >, 'account '. "" S/n "and so on are simply not working.
  
  If anyone knows how to get into what I would be really grateful for the help.

  OK, so if you default a field to the value of another object, you must use the JoinFieldValue function. I think you understand that, based on your original post, but I want to be sure you do.

  Then this won't work by default if the folder is created from the object that you want to join the because a default works in record creation and the ID must be available so that it works correctly. It will not work if you choose the record of the related object after that registration of the custom object is created. You can set the default after, but that does not meet your requirements.

  The syntax of the default are the following: JoinFieldValue (ref_record_type, foreign_key, field_name).

  In your case, ref_record_type is '', foreign_key is [] and field_name is ''. The best way is to determine what is the name of the field to create a new workflow for the account and use the Workflow Rule Condition expression builder to choose your field ("DBA") in the list. The value returned by the expression builder must be placed in the field_name variable in the function JoinFieldValue (minus the parentheses and quotes).

  Give it a shot and let me know how you do.
  Thom

• Just a quick-e Question-how could I get the game Crysis to run the decent framerate on my windows xp media center edition 2005? I have an ATI RADEON Xpress 20 integrated series.

  Well I have an integrated graphics card which is the ati radeon Xpress 200 and I also have the processor AMD Athlon 64 3500 + I am runnig a 1.77 GHz with 960 MB of RAM.

  You can not. Your graphics card and CPU are not fast enough to run Crysis.

• SQL question - aggregate rows based on the value of the columns

  Hi all

  DBA_EXTENTS reports on the number of starting point of measurement (column BLOCK_ID) and the size of the scale in the Oracle (BLOCKS column) blocks.

  I'm trying to combine the lines of the segments of same as if their associated extensions are adjacent.

  For example, assume that the data in the view are as follows:

  Nom_segment	Block_id	BLOCKS
  EMP	10	8
  EMP	18	8
  DEPARTMENTS	26	16
  DEPARTMENTS	42	8
  EMP

  5016EMP668

  And I want to do a set of results that looks like this:

  Nom_segment	Block_id	BLOCKS
  EMP	10	16
  DEPARTMENTS	26	24
  EMP	50	16

  I thought to use an analytical query, but I couldn't find something that meets this requirement.

  Can you please help?

  Hello

  Here's a way to do that using the analytical SUM function:

  WITH got_grp AS

  (

  SELECT nom_segment, block_id, blocks

  , block_id - SUM (blocks) over (PARTITION BY nom_segment

  ORDER BY block_id

  ) AS the grp

  FROM the data

  )

  SELECT nom_segment

  MIN (block_id) AS grp_block_id

  SUM (blocks) AS grp_blocks

  OF got_grp

  GROUP BY nom_segment, grp

  ORDER BY grp_block_id

  ;

  The data you posted in response to #3:

  Pini Dibask wrote:

  Thanks Frank,.

  If you would care to post CREATE TABLE and INSERT to your sample data and the version of your database, then I could show you exactly.

  The Oracle version is 11.2.0.4

  This is the CREATE TABLE and INSERT statements for the sample data:

  CREATE THE TABLE DATA (NOM_SEGMENT VARCHAR2 (20), BLOCK_ID NUMBER, NUMBER OF BLOCKS);

  INSERT IN DATA VALUES ("EMP", 10, 8);

  INSERT IN DATA VALUES ("EMP", 18: 8);

  INSERT IN DATA VALUES ("DEPARTMENTS", 28, 16);

  INSERT IN DATA VALUES ("DEPARTMENTS", 42, 8);

  INSERT IN DATA VALUES ("EMP", 50, 8);

  INSERT IN DATA VALUES ("EMP", 66, 8);

  is not the same as the data in your first post and the results are not the same, either.

  The fixed difference technique involves lines don't overlap.  In the sample data in response #3, 'DEPARTMENTS' lines overlap, i.e. blocks 42 and 43 belong to two segments.

• Retention of records based on the end of the calendar year

  Content using WebCenter 11 g and Records Management, I'm looking for a way to create a rule of provision based on the end of a calendar year.  For example, the rule might wait two years after the end of the calendar year in which the content item has been published.  Does anyone know how to do this?  I'm looking for something that is easy to maintain, but right now my best option is to create a metadata field to end of calendar year and then do a little iDoc script to set point which is archived for each content.  I would really like to avoid this if possible.  Any ideas?

  I think what you're trying to do is to "synchronize on the period start date.  It is part of the definition of the trigger.

  http://docs.oracle.com/cd/E21764_01/doc.1111/e10640/e01_interface.htm#RMDSG620.

  Assuming that the trigger is based on the release date:

  -An item is activated in June 30, 2016.

  -After the date of recording, wait two years.  This makes the eligible trigger on June 30, 2018.

  - But you want to wait until the end of 2018 to make available.

  -Check the above mentioned framework would force alienation to fire on January 1, 2019, instead of June 30, 2018.

• Sets a field in the subform and move all the fields?

  I am building a form and thought all I had to do was to "tweak" the location of some numeric fields and date to complete it.  These fields are floating in the text fields.  But when I move a field, all other fields move too.  When I press on the arrow to the left of the key fields still float to the right.  What is going on?

  My form of hierarchy is as follows:

  Form

  -> header as date fields, buttons, digital.  (this part of the form is ok)

  -> WorkHistory subform (content = Flowed, flow direction = up and down)

  -> Table2 (Binding = table repeat for each data item)

  -> tableheader

  -> tabledetail

  -> tablefooter

  -> PaymentInfo subform (content = positioned)

  -> digital text with "floating" fields and date fields.  This is the section, I have questions.  I am positioning the fields to appear as if it is part of the text fields.  All the numberic, text, date and lines, but not text fields, are moved when a field is moved.

  I am using lifecycle Designer ES2, version 9.0

  Thank you

  Mike

  Hi Mike,.

  Strange behavior, I think that because you have a positioned subform (Subform1) nested under a subform sank (WorkHistory).

  I've changed that while they were at the same level and the fields are moving without the fields next to them.

  https://Acrobat.com/#d=aWShNFztAAc-XgcG6f5urg

  Good luck

  Bruce

• PXI Questions - trigger and save the Communication function

  I would like to use the VISA API for working with modules in my chassis SMU-1062 q. I have installed the following modules in the chassis:

  1 NI PXI-5102 (scope)

  2 NI PXI-5402 (fgen)

  Instruments based on the registry as PXI modules are new to me for example I only worked with instruments of message in office until now. I had a number of questions on how to work with these appliances with VISAS, let me start by two of the most pressing problems for me right now:

  1. I don't understand how material trigger works in a PXI chassis. For example, if I'm working with the PXI-5402 (fgen) and I want to make a hardware trigger on TTL0 that the PXI-5102 (scope) can listen, how to configure it? What I see in the NI-VISA support, the VI_ATTR_TRIG_ID attribute allows you to specify the trigger line of material (TTL0 - TTL7) for a device. Once this is done, I'm supposed to (apparently) use the function:

  viAssertTrigger

  with the value: VI_TRIG_PROT_RESERVE

  in order to 'book' in the line. It is clear to me as agglomerates that produces a trigger on TTL0. At this point, I guess if I wanted to the PXI-5102 to be triggered by the TTL0, then I put the VI_ATTR_TRIG_ID in TTL0 for this camera as well? In addition, what is the difference between the implementation of VI_ATTR_TRIG_ID in TTL0 for the device (INSTR resource) against the implementation of VI_ATTR_TRIG_ID to TTL0 to the chassis (substantive resource of BASKET). What happens when I use viAssertTrigger in each case?

  2. my other question concerns using the PXI modules using ONLY VISA orders (I rather not use NISCOPE and NIFGEN at the level of the API). I understand how to use ViPeekN (16.etc, N = 8) and ViPokeN for reading and writing to/from the registry of PXI Configuration. What I don't understand how to use functions such as ViMoveIn, ViMoveOut etc to run modules, for example, make the PXI-5402 generate a sine wave. In other words, where can I find an explanation of how to order the PXI modules and send data using the API of VISA. It seems that I need documentation that explains how to issue orders of these devices from the registry, which brings à la carte, at the place where to read data from the etc.

  Thank you

  I did some looking and unfortunately we do not have any support for programming level registry with our Modular Instruments.

• (Newbie question) Interval syntax question / explanation of the error

  Ok. So I reach into a big ticketing system based on Oracle (64 bit 11g 11.2.0.1.0) where they store 'ticket-open-time', 'ticket-fixed-time' and the interval of 'time-to-repair. Initially I wanted to calculate the number of minutes of the time of repair. 6 hours and countless Google searches later, I'm not about to the appropriate syntax. I was able to work around the problem through a simple calculation based on the values open and resolved. What I can't understand, is why I can't apply the same syntax extract just the interval field.
  
  Here's a simplified query that works:
  
  SELECT
  To_char (OpenTimeGMT, ' ' the HH24: MI: SS DD/MM/YYYY) "OT".
  , TO_CHAR (ResolvedTimeGMT, ' ' the HH24: MI: SS DD/MM/YYYY) "RT".
  , TO_CHAR (TimeToRepairGMT, ' ' the HH24: MI: SS DD/MM/YYYY) "TTR".
  excerpt (days of day (ResolvedTimeGMT - OpenTimeGMT) the second) "days".
  excerpt (time of day (ResolvedTimeGMT - OpenTimeGMT) the second) "hours."
  excerpt ((ResolvedTimeGMT - OpenTimeGMT) minute second day) "Minutes."
  , (extract (day of (ResolvedTimeGMT - OpenTimeGMT) day to second)) * 24 * 60 +.
  (extract (hour of the day (ResolvedTimeGMT - OpenTimeGMT) the second)) * 60 +.
  extract (minute since (ResolvedTimeGMT - OpenTimeGMT) second day) "TotalMinutes".
  FROM there where
  
  Which produces:
  [OT] 24/09/2012 20:06:29
  [RT] 26/09/2012 13:56:13
  [TTR] 4000/02/01 17:49:44 - Note the year.
  [Days] 1
  [Hours] 17
  [Minutes] 49
  [TotalMinutes] 2509
  
  The question:
  When I write [extract (minute of day (ResolvedTimeGMT - OpenTimeGMT) the second) "Minutes"], I get 49 minutes I expect
  
  When I write [extract (minute since (TimeToRepairGMT) second day) "Minutes"], I get an error "syntax error was found in the interval value expression.
  
  The three fields are declared as 'date' DESC command (even if TimeToRepairGMT is clearly an interval, based on the value of "4000/02/01 17:49:44" ""). While I can plough with my work-around, I really want to know how to deal with intervals that are stored in Oracle tables as dates. Any help is appreciated!

  Hello

  Welcome to the forum!

  966091 wrote:
  Ok. If I am living in a large (64 bit 11g 11.2.0.1.0) Oracle-based ticketing system

  Thanks, that's very useful. Always give your version (11.2.0.1.0) whenever you post a question.

  where they store 'ticket-open-time' and "ticket-fixed-time" interval "time-to-repair. Initially I wanted to calculate the number of minutes of the time of repair. 6 hours and countless Google searches later, I'm not about to the appropriate syntax. I was able to work around the problem through a simple calculation based on the values open and resolved. What I can't understand, is why I can't apply the same syntax extract just the interval field.

  Here's a simplified query that works:

  SELECT
  To_char (OpenTimeGMT, ' ' the HH24: MI: SS DD/MM/YYYY) "OT".
  , TO_CHAR (ResolvedTimeGMT, ' ' the HH24: MI: SS DD/MM/YYYY) "RT".
  , TO_CHAR (TimeToRepairGMT, ' ' the HH24: MI: SS DD/MM/YYYY) "TTR".
  excerpt (days of day (ResolvedTimeGMT - OpenTimeGMT) the second) "days".
  excerpt (time of day (ResolvedTimeGMT - OpenTimeGMT) the second) "hours."
  excerpt ((ResolvedTimeGMT - OpenTimeGMT) minute second day) "Minutes."
  , (extract (day of (ResolvedTimeGMT - OpenTimeGMT) day to second)) * 24 * 60 +.
  (extract (hour of the day (ResolvedTimeGMT - OpenTimeGMT) the second)) * 60 +.
  extract (minute since (ResolvedTimeGMT - OpenTimeGMT) second day) "TotalMinutes".
  FROM there where

  Which produces:
  [OT] 24/09/2012 20:06:29
  [RT] 26/09/2012 13:56:13
  [TTR] 4000/02/01 17:49:44 - Note the year.
  [Days] 1
  [Hours] 17
  [Minutes] 49
  [TotalMinutes] 2509

  The question:
  When I write [extract (minute of day (ResolvedTimeGMT - OpenTimeGMT) the second) "Minutes"], I get 49 minutes I expect

  When I write [extract (minute since (TimeToRepairGMT) second day) "Minutes"], I get an error "syntax error was found in the interval value expression.

  The three fields are declared as 'date' DESC command (even if TimeToRepairGMT is clearly an interval, based on the value of "4000/02/01 17:49:44" "").

  In fact, it is more likely that it is just a DATE, who got the year wrong somehow. Show how you have assigned values to these columns.

  While I can plough with my work-around, I really want to know how to deal with intervals that are stored in Oracle tables as dates. Any help is appreciated!

  The intervals are difficult to work. I suggest that you use very little, or not at all. Keep the storage points in time as DATEs, but store the length of the time as a NUMBER; either the number of minutes, hours, or days, depending on what is appropriate for your data and your business needs best.

  Let's say you decide to keep TimeToRepair as the number of minutes, the length of time of OpenTImeGMT to ResolvedTimeGMT. When you subtract one DATE from another in Oracle, the result is a NUMBER, the number of days between these two DATEs. To get the number of minutes, which multiplied by the number of minutes per day. So the forumla for TimeToRepair is

  (ResolvedTimeGMT - OpenTimeGMT) * 24 * 60
  

  If you store the length of time as a NUMBER, it is very easy to get totals and averages.

  If you want to display this number of minutes like days hours: minutes: seconds, then you can use an INTERVAL, but just for display. Use the NUMTODSINTERVAL function to convert the NUMBER to an INTERVAL DAY TO SECOND:

  NUMTODSINTERVAL (TimeToRepair, 'MINUTE')
  

  I hope this helps you.
  Whenever you have a question, it is useful to show an example of what you have tried and what results you want to get. Post CREATE TABLE and instructions INSERT for examples of data and the results you would get from these data. You will get answers sooner if your question is specific. "How work intervals?" is a very difficult question. Many people who can help you to not trying to answer a question as broad. But if you can formulate your question as: "I need help understanding intervals. Beginning with this data... I tried thinking it would follow... but instead, I got... Why is this? The manual SQL language, to... says..., why is... happening? ", and then it will be easier to help you.

• Define a transitional EO attribute based on the value of the attribute being questioned or persistent

  How to set the value of an attribute of EO questioned not persistent or not based on the value of another attribute of OS which is persistent and questioned the database?

  Thank you

  I finally made it through the PR and PFR controller (when a record is selected) methods.  It works, but I was looking for a hook in the what the VORow instances are created.  As thecreateInstanceFromResultSet method but at this time the transient attributes do not exist in the result set.


• Reviews of custom search based on the trigger of profile value!

  Hello

  I have the following requirement on the custom in UCM10g view...

  -> I'd like to create a view of the personalized search for the user. In this view, I want to the result fields should be displayed based on the profile trigger value.

  For example,.

  If the profile trigger value is instrument so I want A, B, C of fields to display.

  If the profile trigger value is triggerB then I want to E, F fields to be displayed on the custom view of search results.

  In the custom view creation page, I could see more advanced option of adding script IDOC but do not know how to set this up.

  Please advise me to go further.

  Thank you

  Hi Prabhu,

  Please find the solution for the above scenario.

  1. create two rules (rule & rule B) with metadata appropriate to display in the search user interface. Provide the custom label for metadata that must appear in the search engine and the search results page.

  2 create two profiles (profile A & B) with each of the rules to create a smooth side of activation condition carte 'listTemplateId' on behalf of name of the customized results page template

  Example:

  listTemplateId = ViewA

  listTemplateId = ViewB

  3. create two custom results page view using the view of the title as a parent (see A & B). Set the fields to display for each with custom label if necessary.

  4 pne_portal.hda of file for the profile of the user needs an addition of two entries of list template customized.

  5. a "customlisttemplates" in the same folder location should be copied to other users which has two files holding the results of research of field definition.

  Now the custom search results page will be called automatically without changing the display.

  Kind regards

  -Anand

• Quick question: migration cold are still the way to go in a P2V?

  Quick question: are cold migration always the way to go during the P2V conversion on the server than SQL databases?  I am looking for a quick answer/explanation & link possible for literature... well and other assistance you can provide.  Thank you.

  The latest VMware vCenter Converter BootCD is part of the module and VMware vCenter Server 4.0 update 3. I'm not sure whether this is included/available with for example the assessment of vSphere

  André

• Adobe Captivate 7 - is the review of the results of the quiz based on the types of questions?

  Adobe Captivate 7 provides the function that you can review the questions, and you can see which of them have answered correctly and that one of them has responded incorrectly. In my e-learning project, there is an exercise that consists of multiple choice questions and drag and drop tasks. This question / task landslides are among the content slides, this means for example after 5 content slides are a 2 slides, it issues then 3 content slides and slide 1 question and so on. The results of all the types of questions - multiple choice questions, drag and drop - are included in the results of the quiz. At the end of the e-learning the 'quiz' results slide comes with the button "check Quiz." I tested this function after exporting the e-learning of Adobe Captivate7. I noticed the following: If you click on the button "check Quiz" the learner back to all the question slides he or she responded. For that on question slides were automatically placed the buttons 'next' and 'back' and the 'inspection' on the ground it is written what the learner has responded to the two first questions are multiple choice questions. There, it works fine the two buttons will appear. After clicking on the button 'next' on the first question slide that contains a multiple choice question, the learner is the second slide of the question, which also contains a multiple choice question. The third issue is a task of drag / move. He do not appear the buttons so the quiz review stops and there is no field 'inspection '.
  
  How do I review the quiz works correctly despite types of questions?

  You will need to create the buttons that you want the slide D & D and format them to look like buttons on the other Quiz slides. Then hide them by deselecting "Visible output" in the properties panel.

  For these D & D slides, you will need a conditional action advanced or shared to be triggered on enter. The action will check the value of the system variable cpInReviewMode, which is a Boolean with the value of 1 by Captivate when you're in playback mode. If its value is in fact = 1 show you the hidden buttons. If you group these buttons, you will need only a single command:

  IF cpInReviewMode is equal to 1

  See the Gr_Buttons

  Continue

  ON THE OTHER

  Continue

• Want to fill in all fields in an article based on the Yes or no answer to a question from beginning

  I have a form of multi-page, several section I've created. Some of the sections start with a Yes or no question, if the answer is no, then all fields can be filled by n/a, which has a value of zero. I use the drop-down list in the fields and assign values for the Yes, no, N/A responds.

  Is there a way to set the values for all the fields in a s/o section, if the answer to the original question is no?

  Thank you

  MDawn

  HI Margaret,.

  I did not know that the Yes / No questions asked was in a group of radio buttons.

  In this case, I would put the script in the click event and instead to use xfa.event.newText (which relates to the change event), you must use the "this.rawValue" to test against the reaction of the users.

  If the click event is as follows:

  Switch (this.rawValue)

  {

  case 'Yes': / / or whatever you have linked a Yes response to

  TextField1.RawValue = "";

  textfield2. RawValue = "";

  case "No":

  TextField1.RawValue = "n/a";

  textfield2. RawValue = "n/a";

  }

  You can place this script in the click event of the Group of radio buttons, which will cover the two option buttons in the group. Don't forget to have the form to automatically save changes to script (file > properties > by default).

  Yes, "textfield1" is an example of an object in the subform you want to assign by n/a. If the user answers no, then N/A will appear in the part of the value of the object.

  Hope that helps,

  Niall