Quik drop with custum object

Similar Questions

• I put four new ink cartridges, now the photos are drops with ink, literally dripping.

  My ink was low, so I put four new cartridges in French - Photo, Cyan, Magenta, yellow.  Using HP Advanced Glossy Photo paper, and photos are drops with ink.  Please notify.

  Four new ink cartridges caused my photos to drip with ink.

• How to subtract a grunge texture of a layer with several objects?

  Hi all

  I've been struggling with this for hours. Would be very grateful for help.

  I'm trying to apply a vintage texture to some vector illustrations.

  In the screenshot, the work I created is in the layer of "work." I tried to simplify the work as much as possible by using the union, merge, expand, etc. I wanted to do a piece of work, but that seems so simple that I can get it.

  When I try to perform a subtraction on the layer 'work' with the layer of 'texture', basically everything disappears.

  I suspect that it does not work as expected because the layer of my work is always composed of several objects and not a unified object.

  Vintage texture superimposed on the work looks good, but I need this subtraction in vector because I intend to get it printed on a shirt in one color, so I can't get the holes filled with color.

  Any help would be greatly appreciated.

  Thank you!

  Ray

  

  How can I activate art in a single compound path?

  First of all, to unite all paths with the first button in the Pathfinder palette. Then choose object > compound path > make (or press Command-8).

  But don't do it this way. Use an opacity mask.

  If I use the grunge texture as an opacity mask, do I still to transform the art into a single compound path first or I can do to a layer with several objects as if it were now?

  No, you have not; You can keep a complete editibility of your design. You need to just design group firstly, why the opacity mask applies to all this.

  Opacity masks are easier to use if you uncheck "Clip" after their creation. Then, all parts of the mask that is black will be transparent; each part that is white will be opaque, and the things which are shades of gray will be partially transparent. Just like in Photoshop. Right now, your grunge texture is white, so you would need to change to black after making your opacity mask.

• Inference of object with other objects or alignment Center page.

  Is someone can you please tell me how I throw inference guides that highlight when I move an object on the page are centered vertically or horizontally, or in line with other objects. I mean, I want to be able to move objects such as spaces for images and text around frames on my pages and have the alignment guides appear when objects are centered page or in accordance with other objects. It seemed to work when I started experimenting InDesign, but seems to have stopped working in the last day or two, probably because of something I did!

  Little assistance of love!

  Scotty

  I think you want to say "bearings commented. You can adjust in the InDesign preferences. Here is the tutorial of Sandee Cohen on them: http://creativepro.com/align-and-space-objects-indesigns-smart-guides/

• WED ADI error "BY PER_289872_ADI_INTGR_EXISTS: an integrator already exists with this object name.

  Hello

  I try to create a new Integrator, but get the following error when importing to create the Integrator:

  "BY PER_289872_ADI_INTGR_EXISTS: an integrator already exists with this object name.

  I created these several times and it's the first Integrator that I create for this download balance adjustments.

  Any suggestions on what I am doing wrong?

  Thank you.

  Do you get the error even if you use a different name?

  Thank you

  Hussein

• Choose a view with nested object types

  I use 11.2 DB. I created 2 types of objects. The contact_t has been integrated into the student_t object and I created a view with the nested object.

  How do you choose the values of the object contact_t type in the view SQL? I want to see the values of the contact_t object in speerate areas (ie. contact_name, city, Department...)

  Thank you

  CREATE or REPLACE TYPE contact_t () AS OBJECT

  DCID NUMBER (10),

  Contact_Name VARCHAR2 (50).

  City VARCHAR2 (50).

  State VARCHAR2 (10),

  zip VARCHAR2 (10),

  e-mail VARCHAR2 (100))

  CREATE or REPLACE TYPE students_t () AS OBJECT

  DCID NUMBER (10),

  ID NUMBER (10),

  last_name VARCHAR2 (50).

  first name VARCHAR2 (50).

  middle_name VARCHAR2 (50).

  contact contact_t)

  
  

  VIEW to CREATE or REPLACE students_t students_view

  WITH the OBJECT IDENTIFIER (dcid) AS

  Select decided,

  ID,

  last_name,

  first name,

  middle_name,

  contact_t (dcid, contact_name, city, state, zip, email)

  FROM MyTable

  What exactly is the problem? Are you an error? An ORA-01730 by chance?

  Use the default STUDENTS_T constructor in the query from the view:

  VIEW to CREATE or REPLACE students_t students_view

  WITH the OBJECT IDENTIFIER (dcid) AS

  Select (students_t)

  DECIDED

  id

  last_name

  first name

  middle_name

  , contact_t (dcid, contact_name, city, state, zip, email)

  )

  FROM MyTable;

  Then, for example:

  SQL > select t.id

  2, t.contact.contact_name

  3, t.contact.city

  4 t students_view;

  ID CONTACT. CONTACT CONTACT_NAME. CITY

  ----------- -------------------------------------------------- --------------------------------------------------

  1 TEST                                               LA

• change the angle of view of grid 3D with existing objects

  Hello

  I'm new to the perspective grid in Adobe Illustrator and would really appreciate some help. I created a simple room with a 2-point perspective Interior and an angle of 45 degrees. I will now show the same room with an angle of 60 degrees. Is it possible to change the angle of view of 3D with existing objects in it or what I need to re-create the room with a different view angle each time? Can I change the numbers in perspective to define and changes to the grid, but the House does not seem to change with it.

  Thanks, Conny

  the perspective grid is just a load of directives fantasies. It does not affect what you draw after one more as a similar grid drawn on paper could.

• Passage of .jspx to .jspx parameter (stubborn TF dropped with .jsff)

  Hello

  Adfc-config.xml file, I have two pages .jspx A and B

  A, I wanted to pass a parameter to B.jspx that has defined TF has dropped with .jsff in it.

  I tried to call registered managed bean adfc-config.xml file in B.jspx. But it does not work. Please explain the procedure.

  Thank you

  Sridhar

  Hi Sridhar,

  Good to know it worked. Please mark this thread as a response to avoid confusion

  Thank you

  Seddik

• How can I export the schema with all objects and a few tables without data

  Hi all
  
  Verion 10g EA.
  I export the schema with all objects but I need ignored some of the data in the table.
  
  There is a table 4 people gave huge, we need not to export data from tables but structure must export.
  
  
  Thank you
  Nr

  You can do this with a single command.  Run your export as usual and add the query parameters for 4 tables you want all the lines:

  expdp... query = schema1.table1: "where rownum = 0" query = schema2.table2: 'where rownum = 0'...

  It is best to place the query parameters in a parameter file if you don't have to worry about escaping special characters of the OS.

  Dean

• A little problem with an object

  Hi guys...

  I discovered a problem with an object, but I Don t see where the problem may be...

  I have a 'bomb' added to the step only if the var bomb is greater than or equal to 1... and, of course, if you enjoy it, the var Gets a-... However, after a while, it seems once again

  Any ideas?

  Here is the code bound to it:

  var dynamite: Loader = new Loader();

  Dynamite.Load (new URLRequest ("dynamite.png"));

  Dynamite.x = 650;

  Dynamite.y = - 10;

  var bombsound:Sound = new Sound();

  var bombsoundChannel:SoundChannel = new SoundChannel();

  var bombreq:URLRequest = new URLRequest ("bombexplosion.mp3");

  bombsound. Load (bombreq);

  If (! level) {var level: int = 1 ;}}

  var lvlup:int = 200;

  var updlvl:int = (lvlup * level);

  If (!) (Count) {var count = 0 ;}

  If (! bomb) {var bomb: int = 1 ;}}

  dynamite.addEventListener (MouseEvent.CLICK, buttocks);

  function bum(e:MouseEvent):void {}

  If (sonido) bombsoundChannel = bombsound.play ();

  -bomb;

  If (bomb == 0) {}

  If (dynamite.parent) {dynamite.parent.removeChild (dynamite) ;}}

  kill every1

  }

  function level1(): void {}

  If (level == 1) {}

  addChild (nivel1pic);

  If (bomb > = 1) {addChild (dynamite) ;}

  }

  }

  function level3(): void {}

  If (level == 3) {}

  removerViejoNivel();

  addChild (nivel3pic);

  If (bomb > = 1) {addChild (dynamite) ;}

  }

  }

  function level5(): void {}

  If (level == 5) {}

  removerViejoNivel();

  addChild (nivel5pic);

  If (bomb > = 1) {addChild (dynamite) ;}

  }

  }

  function level7(): void {}

  If (level == 7) {}

  removerViejoNivel();

  addChild (nivel7pic);

  If (bomb > = 1) {addChild (dynamite) ;}

  }

  }

  function level9(): void {}

  If (level == 9) {}

  removerViejoNivel();

  addChild (nivel9pic);

  If (bomb > = 1) {addChild (dynamite) ;}

  }

  }

  function level12(): void {}

  If (level == 12) {}

  removerViejoNivel();

  addChild (nivel12pic);

  If (bomb > = 1) {addChild (dynamite) ;}

  }

  }

  function updateLevel(amount:int):void {}

  level += amount;

  Level1();

  Level3();

  Level5();

  level7();

  level9();

  level12();

  }

  Level1();

  Level3();

  Level5();

  level7();

  level9();

  level12();

  Thank you!

  Use the function trace to track when the bomb is added.  IF this happens in each of the functions level, then add traces to everyone to see where and when that happens.

• Documents with Smart Objects - very slow to open and save - Photoshop CS6

  When open and save documents with dynamic objects photoshop freezes the charger of the PS adobe (circle points) is replaced and the system loader (multi color wheel of death) runs for 30 seconds or more.

  What I've tried so far based on different positions by looking at.

  Photoshop Preferenes

  • Reduction in the background
  • Maximize PSD and PSB file compatibility ever
  • Tile cache size: 128 k
  • The advanced GPU settings: Basic & Normal
  • The layer Panel options: no thumbnail

  Observations and workthroughs so far

  • The size of the file and the amount of objects intelligent effects him propelling file that is more intelligent objects, you have the worse it gets
  • These files worked perfectly in PS CS5
  • It also happens on files created natively in PS CS6
  • The CPU is maxing out at 100%, while expenses for PS
  • Suitcase open or closed has no effect.

  System:

  • iMac 27 inches, mid-2011
  • 3.4 GHz Intel Core i7 processor
  • 16 GB 1333 MHz DDR3 memory
  • AMD Radeon HD 6970 M 1024 MB graphics card
  • Mac OS X Lion 10.7.5 (11G 63)
  • Suitcase 4

  Anyone got any ideas? It is making me go nuts!

  A solution!

  It turns out that the problem in my case was in fact the case. Previously, I tried to turn it off, but it does not solve the problem, so this time, I uninstalled it completely and the problem disappeared. Then I started to add new (installed 15.0.1, updated, etc) and the problem has resurfaced with the addition of the specific Photoshop plugin. Removal of this plugin solves the problem. So, it seems that "disabling" suitcase by stopping the TypeCore don't seem to actually deactivate all the tentacles that he sticks in your system.

  You can find the plugin here: Applications / Adobe Photoshop CS6 / plugins / automate / ExtensisFontManagementPSCS6.plugin

  (After a reboot, I also had to remove the font cache, as described here http://helpx.adobe.com/photoshop/kb/troubleshoot-fonts-photoshop-cs5.html but your mileage may vary.)

  Alternatively, if you do not want to remove the plugin, it disabled in Photoshop seems to work as well. To do this, go to file > Automate > Extensis, click on Preferences..., and then deselect enable Suitcase Fusion 4 - Automatic Activation.

  Fortunately, the plugin does not seem necessary at all to use the main features of suitcase (to activate and deactivate fonts) in Photoshop. I didn't even know what these plugins makes specific app until that research on this problem, and I don't always quite understand the point of them. I guess that they allow you to leave the apps for which they are installed a small bit more their own management (activate a font via suitcase that is not on the system-wide), but that seems to be more control I need - if I am allowing a police, I want that all my software to use it.

  In any case, the problem seems to be solved completely on my system now, although I have all this, so more tests in the coming days is required. I'll post here if problems arise. I'm interested in hearing if this solve for someone else.

• ID associated with an object

  Hello

  Each object in InDesign has an ID associated with an object, so that the next time I can identify this object?

  For example.

  I have rectangle and text in it. My script, I would like to identify this rectangle by a unique ID regardless of the text inside.

  http://jongware.mit.edu/idcs5/pc_Rectangle.html

  ID

  number

  ReadOnly

  The unique ID of the Rectangle.

• return used with recursive with type object tree

  BANNER
  Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
  PL/SQL Release 11.2.0.1.0 - Production
  CORE     11.2.0.1.0     Production
  TNS for 32-bit Windows: Version 11.2.0.1.0 - Production
  NLSRTL Version 11.2.0.1.0 - Production

  There was just a post called employee return tree with the object type, and there were several responses.
  I tried to wrap my brain around the recursive with and I was wondering how to implement it for this problem
  
  Basically, the post was something like that.

  CREATE TABLE employees
  AS
     SELECT 1 mgr_id, 2 emp_id FROM DUAL
     UNION
     SELECT 2, 3 FROM DUAL
     UNION 
     SELECT 3, 4 FROM DUAL
     UNION
     SELECT 4, 5 FROM DUAL;

  and he wanted to

  MGR_ID     GET_EMPS(MGR_ID)
  1     2,3,4,5
  2     3,4,5
  3     4,5
  4     5

  as mentioned, it has several solutions were however I was and wrote a recursive function
  to get the answer. that seems to work
  

  CREATE OR REPLACE FUNCTION get_emps (p_mgr employees.mgr_id%TYPE)
     RETURN VARCHAR2
  IS
     v_mgr    employees.mgr_id%TYPE;
     v_emp    employees.emp_id%type;
     v_emps   VARCHAR2 (200);
  BEGIN
     v_mgr := p_mgr;
     LOOP
        SELECT emp_id
          INTO  v_emp
          FROM employees
         WHERE mgr_id = v_mgr;
  
        v_emps := v_emps||','||v_emp;
        v_mgr := v_emp;
     END LOOP;
    exception when no_data_found then
    return  substr(v_emps,2);
      END;

  now, I would like to convert a recursive with my function, but I can't quite understand.
  
  Here's what I have so far but I'm still not close.
  

  WITH emp1 
   (mgr_id, emp_id, emp_ids)
   AS  
   ( SELECT mgr_id  , to_char( emp_id), to_char(emp_id)  from employees  WHERE mgr_id = 1
   UNION /* my internet filter will not alllow me to post this statement */ALL
     SELECT emp2.mgr_id,  to_char(emp2.emp_id), to_char(emp1.emp_id)||','||to_char(emp2.emp_id)
     FROM employees emp2 JOIN emp1 ON (emp2.mgr_id = emp1.emp_id)
   )
   select * from emp1

  Sorry for the comment here we have a weird filter on our internet that does not allow me to view the word a union |

  Hello

  You're so close! You just need a character more:

  WITH emp1
   (mgr_id, emp_id, emp_ids)
   AS
   (
       SELECT  mgr_id
       ,     TO_CHAR (emp_id)
       ,     TO_CHAR (emp_id)
       FROM     employees
       WHERE     mgr_id        = 1
      UNION ALL
           SELECT  emp2.mgr_id
       ,     TO_CHAR (emp2.emp_id)
       ,     TO_CHAR (emp1.emp_ids) || ',' || TO_CHAR (emp2.emp_id)
  --                        ^
  --                        s added above
       FROM     employees emp2
       JOIN             emp1 ON (emp2.mgr_id = emp1.emp_id)
   )
  SELECT  *
  FROM      emp1
  ;
  

  Output:

      MGR_ID EMP_ID     EMP_IDS
  ---------- ---------- --------------------
           1 2          2
           2 3          2,3
           3 4          2,3,4
           4 5          2,3,4,5
  

• Rotate the fillings in gradient with an object

  I created an object with gradients.  I have grouped all the elements in the object.

  When I try to rotate the object, gradients do not rotate with the object.  An element that has been transformed by: Effects-> Warp-> Arc also doesn't turn out as I expect.

  Is there a way to tell Illustrator to rotate an object and keep it as it did before the rotation?

  (I use Illustrator CS5 on Windows XP.)

  Thank you!

  Make the gradient a shade and then fill the object with the gradient which must rotate with the object.

• Drag and Drop with DataGrid to Image

  Hi all
  
  I have experimented with drag and drop between DataGrids. It was pretty simple, but what I want is to take a line from a DataGrid and drop it on an Image. Can I use or overlap the DataGrid drag and drop with a manual drag and drop for the Image? Or should I manually add the drag and drop only?
  
  I guess I'm just trying getting the Image to accept the line of the data grid.

  Hello

  Yes, you can interwine the two. I did something similar, except in my case I
  working with a datagrid and a tree and I need to override the default behavior for the tree.

  Just use dragEnabled = "true" to the datagrid control.

  Then the Image to define functions for the dragEnter and dragDrop events (and from other events, drag if you wish).

  private void doEnter(event:Event):void
  {
  DragManager.acceptDragDrop (Image (event.currentTarget));
  }

  private void doDrop(event:Event):void
  {
  your code here
  }
  Don't forget to add:
  Import mx.managers.DragManager;