Quiz "on the last attempt' & 'success' actions w / advanced answering your comments?

Similar Questions

• check the knowledge on success action

  I'm trying the slides in verification of knowledge. I have sanitation for incorrect actions, works perfectly. But action "to success" does not occur when I show the legend 'correctness '. When I deselect the 'Correct' legend, action (go to the next slide) works well. So my question is, how can I display the 'proper' legend for a few seconds AND then immediately move on to the next slide?

  I expected a little more up-to-date, as check knowledge slides are new in Captivate version 9. But the response of Rod gave a little help to keep experimenting.

  Here's what I ended up doing:

  On the Quiz properties for the slide, I put the action "on success" to go to the next slide. The right answer, I checked the advanced answer Option. For this action is to show an image I use for the correct feedback. This image is not visible in the output, and the calendar is set after the break for the submit question button and lasts 3 seconds so that it will show a significant amount of time.

  Wrong answers do not have the advanced answer option checked. I found that the bad just wouldn't work the same way. So instead, I made more changes to the properties of the Quiz slide.

  The number of attempts is 2, with the message try again checked and 1 error message. In the last attempt, he performs an advanced action that includes continues, show image (feedback wrong - this image has the same schedule as the correct image of feedback), image of correct feedback, jump to slide (for sanitation) Hide hide the wrong image (for future visits to the slide).

  With these settings, the program automatically advance to the next slide, after showing the correct feedback as I wanted when the user correctly answers the question. If the user answers the question wrong twice, he doesn't have to click to start the return of sanitation, but it is a compromise, I can live with.

• I am extremely disappointed by ADOBE software. Adobe recently bought a Stock aircraft and try to use it has realized its futility for my type of service. I'm three days trying to cancel or not. the last attempt was on the phone and let me online for more

  I am extremely disappointed by ADOBE software. Adobe recently bought a Stock aircraft and try to use it has realized its futility for my type of service. I'm three days trying to cancel or not. the last attempt was on the phone and let me online for more than ten minutes and just not talk to the flight attendant. I think he falls into a trap, I have to cancel my credit card.

  Sorry to hear that you were unable to contact our support teams.  I will organize your subscription Adobe Stock must be cancelled.  Please be aware that you must delete all the images you downloaded as they are no longer allowed.

  Kind regards

  Bev

• Hi all, I have been using adobe CS 5.1 software. What do you recommend to upgrade my CS? or get the subscription on an annual basis, thank you in advance for your comments here

  Hi all, I have been using adobe CS 5.1 software. What do you recommend to upgrade my CS? or get the subscription on an annual basis, thank you in advance for your comments here

  The decision is yours as a last resort.  You must take into account your preferences and reasons for use.

  If you use the software mainly for personal projects, and then have a suite may be all you need, and the one you now could suffice for that as well.  If you are a professional who needs to be on the cutting edge, you probably want to have the subscription works for you.

  Upgrading to a new CS means get CS6, which is likely to be the last of the CS of releases.  If you don't have that you pay for it once and what do you get when you pay, it's what you'll get until the it becomes obsolete somewhere off the coast in the future, with the exception of the corrective updates that may be provided.  It should contain up to to be useful for a number of years.

  If you purchase a plan of cloud, you pay for it many times over - essentially a monthly fee - time, but you get the updates and new features as they become available.  There is always a chance that the latest updates could out-spec finally the machine you own, requiring an update of material to continue with new versions.

• Error message: failure of the last attempt to resume the system from its previous location

  I have problem, I can't do anything computer just stuck on the error message screen that reads "the ultimate attempt to resume the system from its previous location failed", the keyboard does not work I can not choose between the choice that is to say 1. continue with the curriculum vitae of system or 2. delete restore data I can't even boot from an installation CD. Help, please

  Hello aliciamulrainqz,

  Apart from questions of Gerry C J Cornell, I have included a link below where the user reported an error even.  Please let us know status.

  Microsoft Answers:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/delete-restoration-data-frozen-Win7-Prof-64/36407a58-e66b-43DE-A21D-f118c85153b4

  Thank you

• Question slides in the race - on success/last attempt does not

  I have zero points question slides after each chapter as a control of knowledge.  The graduate quiz is at the end of the course.  I have the actions on the success and the last attempt to jump to the slide - dishes.

  When I publish the course and flow through the audit questions examine are continued to the next slide by report to jump to the menu of dishes.

  Any ideas?

  

  In quiz preferences that I unchecked "allow backward movement" - once I checked it once again jump to slide reworked.

• Quiz, 'Last attempt' action does not

  In my project, the user has to choose to create a branch and follow the course or take a branch of the advancement of knowledge. If they choose to take the race management, questions are interspersed throughout the content after the content tested for. They are not classified on the quiz. Most of the questions is configured to allow 1 or 2 attempts. Quiz slides are defined in advance just to the next slide contained before.
  If they choose the branch of the advancement of knowledge, he takes them directly to the first question. If they answer correctly, they continue to the next question. When they answer correctly, they must be picked up at the beginning of the content of this section.

  I have the action of 'Success' configured to run a tip action that checks if a variable user to check what branching method, they chose, then "go to" the correct slide (success goes to the next question). This part does not work properly.

  'Failure levels' are set to 1. For the "last attempt" I also put it to run a tip action that checks if a variable user to check what branching method, they chose, then "go to" the correct slide (failure dates back at the beginning of the content for that matter). This part does not work properly. The project is not navigate to content in case of failure. My quiz is noted, but none of the questions are awarded points (they should be able to answer questions twice, but are able to continue even if they are not properly the second time).

  In Quiz preferences, I "branch of consciousness" checked and 'Allow the movement to the rear', in the region of success or failure, the user doesn't have an attempt to take the quiz. "

  On the question slide, I have "Attempts" value 2 and 'Levels of failure', set to 1. I tried different things in the 'last attempt' fall down and none have worked. The right question slide moves to the next slide and does not take into account what I put in unrolling the last attempt.
  Is there anything else I can check or change to ensure that it works properly?

  Thanks in advance for your suggestions.

  

  I'm done with two copies of each slide in the question.  One at the beginning of the content and the other at the end.  If the user gets the first incorrect answer, they just continue with the content and taking up the same issue (a different slide number) at the end.  For some reason, Captivate didn't work well, go backward.  This double solution the number of question slides in my project, but so far I don't have a big project.  Do not forward to the next project, which has already obtained up to 111 slides, with about 30 more to go finishing.  Because of what I do, my post must be an exe file.

• Set the failure message on the display of the results of the second attempt

  Hello

  I have put 2 attempts for the quiz of all and to customize the message of failure for the second attempt failed such as:

  • On the first attempt failed, the message reads: sorry! You can't pass this time. Resume the quiz.
  • On the second and last attempt should read the message: sorry! You do not have. Please review the course.

  I know that I can put a message of failure Quiz Préférences > settings > Quiz result Messages > Message Fail. But I can put more than one failure message (the first one) and one of the last attempt in Captivate 5.5?

  Please let me know.

  Welcome to the forum,

  Try to change the number of levels of failure (accordion Action) from 1 to 2. You will get two legends of failure in this case, you will be able to change.

  BTW, it's a good idea to mention the version of CP you use (detailed, because there is a difference between 6.01 and 6.1). Sorry, did not read you use 5.5

  Here, still too early. My workflow is to issue level, not on Quiz level. To change the legend of failure then, I don't see an easy workflow immediately. Stocks advanced and custom issues, it is certainly possible, but with test blades by default, you don't have much control over the objects on this slide of quiz.

  http://blog.lilybiri.com/question-question-slides-in-Captivate

  Lilybiri

• Impossible to install the last Flash - failure to initialize drive

  From what I've seen here and on Google there are serious problems with your latest version.

  Most of them before 10, 3.xxxxxxxxxx (later) installed perfectly, but later we won't.

  I am running Win XP Pro and have tried everything, including the uninstall of the previous version of work.  The operation has failed and I had to do a system restore in the short term to at least find a version that will show videos of You Tube.

  I am however getting tired of all these reviews on my Flash Player is outdated.

  Adobe should not launch a product that is not yet installed.

  Yes to hundreds of thousands of us have the same problem.

  Just Google 'failed to initialize' and see the success.

  Well well outside this forum.

  PLEASE give us market orders step by step to solve this problem.

  Or update the version.  I can't even quote the version number because it has disappeared from my download folder after the last attempt failed.

  Thank you

  You can try to download and install installers located in this FAQ post?

  Where can I find direct downloads of Flash Player for Windows or Macintosh?

  Thank you

  Chris

• I'm having a problem with the update of the last security update. What can I do?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: problem getting my pc to download the latest security update

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Floyd,

  It helps those answering questions if you provide:

  What version of windows (32-bit or 64-bit) and service pack level.

  you use what browser (exact version).

  What application or antivirus security suite is installed and your current subscription?

  What third-party firewall

  What anti-malware software can be installed.

  What updates you trying to install?
  What error do you get everything when trying to install updates?

  In addition to the information required:

  How to view the log of update windows

  Click Start, and then click Run.

  in the Open box, type%windir%\windowsupdate.log

  and then click ok.

  Scroll down to the last entries find the error codes associated with the last attempt to download/install.

  start at the bottom and work your way up a section that indicates an ERROR, WARNING or FATAL.

  If the appropriate copy and paste the codes of errors in this thread if someone may be able to help you.

  on the other hand, you can find the error code and other suggestions by searching the forum.

  Also check the windows file called Ko folder * .log (* = number of update KB896688 ie) and send the contents of the update has failed.

  This may even provide clues as to why the update failed.

  How to read the windowsupdate.log file:

  http://support.Microsoft.com/?kbid=902093>

• Code last attempt q10 Q10 blackBerry unlocking Rogers

  So, I tried with a Rogers code to unlock my q10 and now this is the last attempt. Rogers says he comes to blackberry. BlackBerry support sent me emails telling me that it is Rogers unlock the phone. I don't want to block my phone forever, what I'm doing with this last attempt?

  @keefrto1 and myself have been able to solve this problem

  Thanks for @JSandersof markup!

• ACS 5.1 omitting the first attempt for the user

  Hi all

  I am facing a problem, a strange problem with the ACS. I use 802. 1 x on my network to authenticate users. I found that when I connect my network cable and put my authentication credentials will fail directly. I turn off my connection and will again and apply the same credentials, it works perfectly. I don't know why for the first attempt, it will fail the authentication and it will tell that (24217 host is not in the internal host identity store). You can see the table below showing the first attempt failed, but the second attempt successful for the user (testuser).

  DEC 6, 10 PM 1:31:11.656

  -

  testuser

  00-12-AE-7A-69-N6

  Default network access

  PEAP (EAP-MSCHAPv2)

  Dot1x-3560-Switch

  1.2.3.4

  FastEthernet0/8

  TESTACS

  DEC 6, 10 PM 1:30:43.393

  testuser

  00-12-AE-7A-69-N6

  Default network access

  PEAP

  Dot1x-3560-Switch

  1.2.3.4

  FastEthernet0/8

  TESTACS

  24217 l'hôte ne se trouve pas dans le magasin d'identités hôtes internes. Please find the picture as an attachment to the (sequence of identity store) Any help is appreciated Thanks in advance, Hello in your sequence of identity store, I would suggest that you remove everything from the text box below, called "recovery of additional attributes. Nicolas === Remember responses of the rate that you find useful Do not advance after incorrect answer quiz (quiz uses the user variables to show the wrong answers) Hi all Long time lurker, first time poster. I hope someone can help me. After watching this excellent video about adobe captivate blog "so what were the right answers in any case" I created a quiz with user variables and conditional early action. It displays a red x next to each question answered correctly at the end of the quiz. I created the variable user for each question to a value of 0. On an incorrect answer, the variable would be set to 1. At the end of the quiz is a blade that question and shows a red cross next to each question with a variable set to 1. uses conditional action that is triggered 'upon entry. It works, but my problem is when I saw the quiz (in the browser or SWF), on an incorrect answer, the legend of the failure appears but does not really advance the question when I click anywhere or press o. It works well on the correct answers. Can I sovle this by adding a next button, but I'd like to understand what I'm doing wrong. Using captivate 6.0.1.240 (copy in box) Windows 7 images on the quiz properties and conditional action below Any help appreciated. Concerning Jacob C I tested this workflow on 6.1.319 and it works fine. If a little guess in the wild... No 6.0.1.240 around at the moment. Seems strange, because a simple action like your Assign action should normally release the read head. But of course, it's a question slide and they do not always behave as expected. Could you try to replace the action of the beneficiary by a standard tip with 2 statements, like this action: Assign the var_question_1 with 1 Continue And please, let me know if it works? This could be a difference between the two versions, but not sure at all. Lilybiri Captivate 4 replay output SWF will slide to the last visited Hi, I have a Captivate 4 course published; full screen SWF, Flash 10, AS2, includes quiz questions optional not followed, unmarked, KNOCK, branch, no LMS reports, a certificate with the variable name widget. Everything works absolutely perfect when you first play the SWF file. But if read you again the SWF file, it loads the first slide, then quickly advances to the last slide visited, if it was the slide or if you leave anywhere in the middle. It occurs in all conditions: whatever the browser (IE, Firefox...), regardless of the method of opening a SWF file by restarting browser, 'open with', etc.  It's as if there is a bookmark to the flag and continue where the viewer was off.  But I can't find any setting for this?  I have published many, and this is the first time I met this. What I'm missing from the gurus? Thank you in advance for your help! You can check the settings of the table of contents: may individual learning is turned on? Which will store a cookie on the PC and will return to the slide where the user left, kind of bookmark indeed. Lilybiri the last character to jump printjoins My version of oracle is 10.2.0.4.0. I defined the special characters in the printjoins. Therefore, special characters are now stored in the chips, but this isn't the last special character. Steps to reproduce: create table mywords (text varchar2(200)); insert into mywords values ('HELLO P.L.C.'); insert into mywords values ('WORLD H.M.'); -- I define lexer as follows: BEGIN    --ctx_ddl.DROP_PREFERENCE('my_lexer');    ctx_ddl.create_preference('my_lexer','BASIC_LEXER');    ctx_ddl.set_attribute('my_lexer','printjoins','-_~!@#$%^&*(){}[]=?\;><.+'); END; /  CREATE INDEX MYWORDS_CTX ON mywords(text) INDEXTYPE IS CTXSYS.CONTEXT PARAMETERS ('lexer my_lexer SYNC(ON COMMIT)'); Now I'm waiting for the symbolic text to store P.L.C. and H.M. but it only stores P.L.C & hadil I won't be able to define the join end as '.' because it is already defined in print join. sql> SELECT TOKEN_TEXT FROM DR$MYWORDS_CTX$I WHERE TOKEN_TEXT LIKE 'H.%' or TOKEN_TEXT LIKE 'P.L.%'; TOKEN_TEXT ---------------------------------------------------------------- P.L.C H.M All the solutions to store the last special character also? Thanks for your time. The period is a sign of punctuation by default, as well as the question mark and exclamation mark. When you have the period as a printjoin and a punctuation, punctuation is a priority. Although the last period will not be part of your token, it won't affect your research. You can reset your punctuation to just the question mark and exclamation mark, without the period and which will cause the last period to include in the token, but it will be another problem. If you do this, then once you are looking for the last word of a sentence before a period, you will need to include this period or you won't find it. Please see the demo below shows first what you have with the research work as planned, and then removes the punctuation period, so that the last period is included in the token, but then a search for the last word in a sentence without a period is not found. Thus, it is best to leave things as they are. SCOTT@orcl_11gR2> create table mywords 2 (text varchar2 (200)) 3 / Table created. SCOTT@orcl_11gR2> insert into mywords values ('HELLO P.L.C.') 2 / 1 row created. SCOTT@orcl_11gR2> insert into mywords values ('WORLD H.M.') 2 / 1 row created. SCOTT@orcl_11gR2> insert into mywords values ('This is a test.') 2 / 1 row created. SCOTT@orcl_11gR2> BEGIN 2 ctx_ddl.create_preference 3 ('my_lexer', 4 'BASIC_LEXER'); 5 ctx_ddl.set_attribute 6 ('my_lexer', 7 'printjoins', 8 '-_~!@#$%^&*(){}[]=?\;><.+'); 9 END; 10 / PL/SQL procedure successfully completed. SCOTT@orcl_11gR2> CREATE INDEX MYWORDS_CTX 2 ON mywords (text) 3 INDEXTYPE IS CTXSYS.CONTEXT 4 PARAMETERS 5 ('lexer my_lexer 6 SYNC (ON COMMIT) 7 STOPLIST CTXSYS.EMPTY_STOPLIST') 8 / Index created. SCOTT@orcl_11gR2> SELECT TOKEN_TEXT 2 FROM DR$MYWORDS_CTX$I 3 / TOKEN_TEXT ---------------------------------------------------------------- A H.M HELLO IS P.L.C TEST THIS WORLD 8 rows selected. SCOTT@orcl_11gR2> SELECT * FROM mywords 2 WHERE CONTAINS (text, 'P.L.C.') > 0 3 / TEXT -------------------------------------------------------------------------------- HELLO P.L.C. 1 row selected. SCOTT@orcl_11gR2> SELECT * FROM mywords 2 WHERE CONTAINS (text, 'H.M.') > 0 3 / TEXT -------------------------------------------------------------------------------- WORLD H.M. 1 row selected. SCOTT@orcl_11gR2> SELECT * FROM mywords 2 WHERE CONTAINS (text, 'test') > 0 3 / TEXT -------------------------------------------------------------------------------- This is a test. 1 row selected. SCOTT@orcl_11gR2> DROP INDEX mywords_ctx 2 / Index dropped. SCOTT@orcl_11gR2> BEGIN 2 CTX_DDL.SET_ATTRIBUTE 3 ('my_lexer', 4 'punctuations', 5 '?!'); 6 END; 7 / PL/SQL procedure successfully completed. SCOTT@orcl_11gR2> CREATE INDEX MYWORDS_CTX 2 ON mywords (text) 3 INDEXTYPE IS CTXSYS.CONTEXT 4 PARAMETERS 5 ('lexer my_lexer 6 SYNC (ON COMMIT) 7 STOPLIST CTXSYS.EMPTY_STOPLIST') 8 / Index created. SCOTT@orcl_11gR2> SELECT TOKEN_TEXT 2 FROM DR$MYWORDS_CTX$I 3 / TOKEN_TEXT ---------------------------------------------------------------- A H.M. HELLO IS P.L.C. TEST. THIS WORLD 8 rows selected. SCOTT@orcl_11gR2> SELECT * FROM mywords 2 WHERE CONTAINS (text, 'P.L.C.') > 0 3 / TEXT -------------------------------------------------------------------------------- HELLO P.L.C. 1 row selected. SCOTT@orcl_11gR2> SELECT * FROM mywords 2 WHERE CONTAINS (text, 'H.M.') > 0 3 / TEXT -------------------------------------------------------------------------------- WORLD H.M. 1 row selected. SCOTT@orcl_11gR2> SELECT * FROM mywords 2 WHERE CONTAINS (text, 'test') > 0 3 / no rows selected SCOTT@orcl_11gR2> Maybe you are looking for Why can't just drag photos on my desktop with Sierra 10.12 and Photos 2.0? I used to be able to simply drag a photo from Photos or iPhoto directly on the desktop of my iMac.  Then, I was able to drag the photos located on my desktop to eBay, Craigslist or other sites that I use to sell items.  Now, it seems I have to use a Scans the registry, has found errors at least 2000 +. Ideas: You have problems with programs Error messages Recent changes to your computer What you have already tried to solve the problem Remember - this is a public forum so never post private information such as numbers of mail or telephone! HP6520: Server connection error: 403 Hi, I have problems with my all in one printer. The above error message is coming when I try to scan to e-mail. It worked very well, he is very picky. I tried the recommended fix by manually entering the DNS 8.8.8.8 & 8.8.4.4 number but no joy. Can y I started to run Disk Defragmenter on my laptop with Windows Vista to 7:45 last night. She is still ongoing at 10:55 the next day. That is what it is? I can't believe that it takes more than 12 hours to defragment a hard drive. VistaDefragmenter HP Pavilion p6204y Error Message - «Reboot and Select...» » I get this message only when I use my Western Digital WD7502AAEX 750 GB hard drive.  I have run chkdsk, WD, CrystalDisk diagnosis, whatever you can imagine.  I went into the BIOS and made sure that this drive is the first boot device.  When I install Similar Questions Quiz "on the last attempt' &amp; 'success' actions w / advanced answering your comments? check the knowledge on success action I am extremely disappointed by ADOBE software. Adobe recently bought a Stock aircraft and try to use it has realized its futility for my type of service. I'm three days trying to cancel or not. the last attempt was on the phone and let me online for more Hi all, I have been using adobe CS 5.1 software. What do you recommend to upgrade my CS? or get the subscription on an annual basis, thank you in advance for your comments here Error message: failure of the last attempt to resume the system from its previous location Question slides in the race - on success/last attempt does not Quiz, 'Last attempt' action does not Set the failure message on the display of the results of the second attempt Impossible to install the last Flash - failure to initialize drive I'm having a problem with the update of the last security update. What can I do? Code last attempt q10 Q10 blackBerry unlocking Rogers ACS 5.1 omitting the first attempt for the user Do not advance after incorrect answer quiz (quiz uses the user variables to show the wrong answers) Captivate 4 replay output SWF will slide to the last visited the last character to jump printjoins © 2024 eehelp.com. All Rights Reserved. 10 q. 0.018 s. Contact Us - Terms & Conditions - Privacy Policy