Do not advance after incorrect answer quiz (quiz uses the user variables to show the wrong answers)

Similar Questions

• Slide show not repeated after that some buttons are used?

  Hello

  I have this slideshow that I am so close after completing, but there is a problem I'm having with it not repeated after that some buttons are used. I tried to understand what could be the cause, but I can't see what it could be. According to me, that I'm so very close to having this if it wasn't for that matter.

  Slide show buttons '1' and '2' work perfectly, however '3' to '6' buttons do not work completely as it should. During the presentation, as he plays through the slides, if you click on the button "1" or "2", you are taken to the corresponding slide and the slide show resumes automatically, which is correct. However, if you click on one of the buttons "3" to "6" you are always taken to the corresponding slide, the slide show does not resume and remains on this particular slide. I looked at the code for the Action Script 3 several times and I don't see what could be causing this but I'm not too experienced so that there could be an error, no matter how minor, that I'm missing.

  I have attached the file and if anyone has any advice at all or can somehow help I would REALLY appreciate it!

  Thank you

  William

  Is your link to the object or picture.  I ran into this many times, I accidentally select the frame and not the object in the slideshow for the link.

  Although he thinks through the problem only comes when you go directly to the frame and not when you play through.  Maybe action that activates the link lights when the object is revealed onstage on a previous frame.  When you jump on the structure with the object already play in the advances head beyond the line of code providing the link and instructions is therefore missing.

  If the code with the link is on frame 10 and the function to move to the slide rests on frame 15, the film would not only go 10 frame, but also actionscript code that frame so lack the instructions to be a link.  Don't forget that this programming happens on a timeline, if the read head misses the keyframe with the instructions, that he will not return to them to find it for you.  Try to make a keyframe a picture before ordering GOTO AND STOP and put another link it so when the playhead crosses the new keyframe the link code is read correctly.

  That's what I'd do to test the theory,

  Good luck

  Brett

• Vista does not load after that install Microsoft Update error the breakpoint of the exception. "A breakpoint has been reached (0 x 80000003) occurred in the application at location 0x73eb764a.

  Original title: Vista does not load after you install Microsoft updates

  A Dell Inspiron. Updates have become available and have been installed. Next time the laptop was put on it does not start, it was all there on the screen was the dotted line down and after some time a black screen.
  I tried running the recovery and I get the message "the breakpoint exception. "A breakpoint has been reached (0 x 80000003) occurred in the application at location 0x73eb764a.
  At the time that the laptop does not work and I have no idea what updates have been downloaded and installed.

  Hello

  Try the methods provided below and check if that helps.

  Method 1:

  Step 1:

  Try to boot in safe mode with network and check if you are able to boot to the desktop.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2:

  If you are able to start the office try to download and run a system scan using the Microsoft Safety Scanner full and check if that helps.

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note:
  The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  See also:

  How to remove a computer virus?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  Method 2:

  Clean boot

  If the problem does not persist in safe mode you can also perform the clean boot.

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note:

  After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 3:

  Try the system restore by using the System Recovery Options.

  The System Recovery Options menu is on the Windows installation disc. The menu can also be installed on your drive hard if your computer has preinstalled recovery options.

  For more information click on the link below.

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Please keep us updated on the State of the question so that we can help you further.

• on the backup, I saved D recovery and it stopped due to 'not enough space. / have I saved in the wrong place?

  I backed up my computer and it went to recovery D but it has stopped backup because of the "not enough space" How can I handle this?  I'm new on this.

  I backed up my computer and it went to recovery D but it has stopped backup because of the "not enough space" How can I handle this?  I'm new on this.

  dodieZONAKIS DDS,

  Your question [on backup, I saved the D collection and he stopped due to 'not enough space.] [/ have I saved in the wrong place?] (<-- that="" is="" a="" link="" you="" may="" click="" on="" to="" get="" back="" to="" your="" original="" question)="" has="" been="" marked="" as="" answered,="" only="" you="" did="" not="" mark="" it="" as="" such="">Rob.C a.]

  I feel compelled to ask whether and how you solved your problem?

  The marked answer * not * have one you used and for the benefit of those who might ask the same question in the future it is better the original poster mark their own answers, in my opinion.

  If you feel that your issue has been marked as answered by mistake (the answer does not match your need or your fix) then please, deselect as soon as POSSIBLE. I am including instructions on how:

  You can go to the answer and click on the following to stand out as a response.

  

  If you are able, please go back to your original question and that everyone knows how you solved your problem, if you have and mark the answers correctly. This initiative will help to close the question properly or help us to help you if you still need help.

  Thank you!

• My Mozilla Firefox browser does not open 4.5 sites that I use the most. That is, among other things, Gmail, Facebook, LinkedIn and other 2. I have re installed twice and got

  My Mozilla Firefox browser does not open 4.5 sites that I use the most. That is, among other things, Gmail, Facebook, LinkedIn and other 2. I have re installed twice and got a version update, but the problem is still there. Please help me, I am so worry not.

  Thank you.

  Shakeel.

  See:

  • http://KB.mozillazine.org/Error_loading_websites

  You can try to reset (power off / on) of the router.

  Do a check with some malware malware, analysis of programs on the Windows computer.
  
  You need to scan with all programs, because each program detects a different malicious program.
  
  Make sure that you update each program to get the latest version of their databases before scanning.

  • http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
  • http://www.superantispyware.com/ - SuperAntispyware
  • http://www.microsoft.com/security/scanner/en-us/default.aspx - scan Microsoft Security
  • http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
  • http://www.safer-networking.org/en/index.html - Spybot Search & Destroy

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • http://support.Kaspersky.com/viruses/solutions?QID=208280684

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

• Equium L40: After bad Bios update cannot use the WLan

  Hi there hope someone can help.

  I've updated the Bios as tempo toshiba said, but I have not read the last piece. Who was that it is not for mine which is the model L40.

  I have now tried to put the right pair, but he says he can't. As I'm putting that has an earlier date.

  My main problem now is that my wireless stopped working, it says its there and so to work, I put the switch on, but he can't find any networks he used to find approximately 4 in my area

  Do I have to restore my entire system :(?

  I'm really confused about your message because the European Toshiba page provides drivers and BIOS for one Equium L40 series m.
  I found 2 different versions of the BIOS for Equium L40; a BIOS for XP and a BIOS for Vista.

  In my opinion it of almost not possible to update the BIOS with the wrong version

  However, it you have updated and used the wrong BIOS, then you must contact the ASP to help

  But first, I recommend a check of the WLan configuration

• Please God. turn off this product. Your help desk services do not work, cannot turn off. I use the retail SECTOR, xi of adobe acrobat. Connected to the internet. On more than 20 min. open for disable grayed out. Windows 7 pro x 64. This shit makes people

  Please God. turn off this product. Your help desk services do not work, cannot turn off. I use the retail SECTOR, xi of adobe acrobat. Connected to the internet. On more than 20 min. open for disable grayed out. Windows 7 pro x 64. This shit makes people use fraud. I just want what it OFF can be USED on another COMPUTER.

  can anyone in the customer support to disable this?

  Hello Terry,

  I checked the serial number and found that you have enough number of activations left to install on 2 computers.

  Please uninstall the software and activate it on another machine. In case of problems please let me know and I'll help you.

  My direct email: [email protected]

  Chat Support email:

  http://helpx.Adobe.com/x-productkb/global/Service1.html

  Kind regards

  Rave

• Data resources not defined when you perform commissioning programmatically using the API of the IOM

  Hello

  I use code below for the provision by programming a resource to a user, but the resource data is filled. The only fields get populated are those who have prepopulate fixed adapters.

  --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  Data com.thortech.xl.vo.ResourceData = userIntf.provisionResource (Long.parseLong (userId), objectKey);

  long userObjectInstanceKey = Long.parseLong (data.getOiuKey ());

  long objectInstanceKey = Long.parseLong (data.getObiKey ());

  Hashtable InputHash = new Hashtable();

  Fill out the entry below with data from object

  for (int b = 3; b < row.length; b ++)

  {

  System.out.println (getTimeStamp () 'value of parameter', header [b] + "=" + row [b]).

  inputHash.put (header [b], [b] row);

  }

  Sets the data object

  formIntf.setProcessFormData (objectInstanceKey, inputHash);

  --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  --

  UZ

  UZ, you use the wrong key here, it is the key to the OBI, pretty ORC touches to set the data form. Get the key of the user to help process instance

  tcResultSet resultGetObjects = (usr_key) userOperationsIntf.getObjects;

  int countResultGetObjects = resultGetObjects.getRowCount ();

  for (int j = countResultGetObjects; j--> = 0 ;) {

  resultGetObjects.goToRow (j);

  If (resultGetObjects.getStringValue("Objects.Name").equalsIgnoreCase ("object name"))

  {

  System.out.println ("instance key:"+ resultGetObjects.getStringValue ("process Instance.Key") ");

  }

  Mark it is OK if your question is answered *.

• my privacy setting is stuck on do not forget history, won't stay on using the custom settings for history, after I've selected and click ok

  When I go to tools, Options, privacy and "Use the custom settings for history" of the value and then click on OK it won't save. It remains on "Remember history", even if she never will save "remember history" as I tested it. It seems if be produced after these recent last Firefox update. Anyone know why I can not choose "Use the custom settings for history", as is the parameter I want to use?

  Why aren't satisfied with the history settings by default that you currently have?

  Any changes (for example, to disable the cookies third party or form not given memory or keep cookies until you close Firefox and make an exception for the cookies you want to keep) that you will cause "use... custom parameters. "to be selected if you really want to see.

• Game Center does not work after update to ios9.2 also the games who need freezing when loading so I can't play you can solve this problem, so I can play games on my ipadmini2 again?

  Game Center does not work after ios9.2

  problem known, search the Forum, many details.

• My Halo CE says that my product key is not valid after I have install and update the game.

  I install my copy of Halo CE on my computer. I enter the product key and accept the key. I update my game and everything is still fine then. After that I restarted the game as required, he said that my product key is not valid. I do not understand why he said it. I know that it is valid. I used the said product key to unlock the Halo Reach for this Halo nameplate on the site Web of Bungie. I'm not sure why this is happening. In addition, this product key is not the key supplied with the disc. I lost my old drive and had to borrow one from a friend.

  Hello

  1. your friend is also using the same product key?

  Try the steps listed in the link below: "your product key is not valid" error message when you start Halo: Combat Evolved: http://support.microsoft.com/kb/842948   

• Keypad on my keyboard does not work after siging on Win 7, but the keys do not work if 'Num Lock' is OFF.

  IF you are looking for this issue you may find other places where I posted questions, got some answers, tried and so far none succeeded.
  The keyboard n doesn't have this problem with my Windows XP starting and using the two USB connection and PS/2 connection with the adapter does not keys work...
  If anything else out there to try?

  Hi ZackWA,

  I know that you have posted on this issue several times and haven't found a solution yet.  I couldn't see the following article, mentioned in the previous discussion was not sure if you saw it or not?  Please see the link below:

  http://support.Microsoft.com/kb/894037

  Included in the article is a link where to download the latest version of the software for your keyboard:

  http://www.Microsoft.com/hardware/download/download.aspx?category=MK

  I hope this helps! Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Virtual machine does not start after restoring from Time Machine to the new Imac

  I got my IMac replaced by Apple, after that they could not fix the old one.  They did a full restore from a Time Machine backup.  The virtual machine does not open now.   When I navigate to the file to try to open the virtual machine at the VMware logo in the bottom right of the icon displayed with large yellow exclamation appears on the icon?  Anyone encountered this problem before.  I'll take the Imac in Saturday if I can not solve.  The machine has the same size as before.  There are a few aspects of sharing with the Mac application miss me?

  According to the MacVirt.vmdk folder, you have the right number of segments of shared disk so you should be able to create a new VM by pointing to the disc in the new VM Wizard by pointing to the MacVirt.vmdk file.

  Note: After you create the new Virtual Machine, I would not suggest the Virtual Machine to stop, pause and close merge and then move all *.vmdk files in the package of the virtual machine, and then manually change the computer configuration files virtual .vmx and change the path to a little to view the MacVirt.vmdk file.  In this way, everything is in one package and is easier to maintain.

• Photosmart C309a: Printer does not work after uninstalling and reinstalling to resolve the question of the HP Solution Center

  HP Solution Center has stopped working so I followed the advice of HP Support Assistant to uninstall and reinstall the printer.

  Cannot get printer to reinstall successfully, and more, none of the physical controls on the printer will work much longer, even the power of the power button.  Have to unplug the power off.

  Ironically, I found since the 'solution' through this forum to get Support HP Center works again by uninstalling a recent Windows Update, but do me no good now.

  I tried to uninstall and reinstall the software of the driver several times without success and I'm worried that the function keys not working not not at all on the printer indicates an internal matter that cannot be repaired.

  Anyone encountered this problem?

  Hello - Thanks for the reply.  Power the device power on and off has not fixed anything.  However, suspecting an internal firmware issue, I did a search on the web to see if there was a mechanism to reset.  I found a very useful website that describes three levels of resets, and the second level one (#6) fixed my problem.  I'm surprised HP doesn't have this information in its documentation or on its website.  I understand he has the potential to be used for the wrong purposes and perhaps make an irreparable problem, but it is clearly the solution to an inoperable Panel.  My printer was working fine before this problem and is now back to work again.

  http://resetprinters.com/three-ways-to-reset-the-Photosmart-Premium-fax-C309a-all-in-one-printer/

• After you have configured Anyconnect using the client of the wizard is unable to connect to Internet

  Hello

  I have a small Setup w/8.4 ASA - 5520. Outside goes to Internet, the inside is 172.17.0.0/16 network and management is 172.17.2.0/24. VPN IP pool is 172.17.8.0/24.

  After that I configured webvpn with the wizard, I have VPN into a fine, ping other IP switches and routers (ASA is running EIGRP and distributing its static route to the internet to its neighbors). I have Setup nat to allow for Internet access from the inside to the outside, use off interface as the translated source.

  After I VPN in, I am assigned a correct address for my pool VPN (172.17.8.21 for example). I can't ping or connect on the Internet however. Newspapers reveal nothing, I don't see any rejected packets. I can't reach the management either network. The management network is a switch that has all the ports of the management of the different switches, faders load, etc on this subject, but I can't access it.

  I wonder what type of NAT configuration, I have to do here and how to I'm to deny access to the Web interface and management, but nothing appears in newspapers despite debugging setup and open the firewall until completely bringing all traffic.

  The security level is 90 for the Interior and 0 to 100 outside management. The possibility of allowing equal security level interfaces pass traffic is selected. I got inside and the management to 100 before and it did not work with VPN.

  Please help, I do not have my config ASA handy ATM, but I will by hand in a few hours.

  I was wondering if anyone has recommendations on the use of NAT so I can get access, I need.

  Thanks in advance

  Patrick,

  Do not have access to an ASA myself so the commands below are not soundproof.

  But I guess if you're missing config NAT, it would be the document describing:

  https://supportforums.Cisco.com/docs/doc-11640

  To access the management, good show use some newspapers :-)

  show xlate det | I have IP_ADD (for source and destination IP)

  Show logg. I have IP_ADD (make sire logging is enabled for buffering on the level of information and to do for the source and destination)

  Marcin