R12.1.3 - General question about patching of intermediate level
R12.1.3 running on RH Linux 5.8. Just applied PSU to the 11.2.0.3 database and now by looking at the Jan 2014 CPU refers to
Oracle Fusion Middleware 10.1.3.5 and patch 16802091 .
Now, in my last attempt to clogging, I made the correction to the database but I only did the correction of Middleware.
If I look at it is seems to be a process quite simple patch but I'm not sure what about my setup $ORACLE_HOME.
The Guide says to make sure that the $ORACLE_HOME of environment variable is defined but that normally gets together at TOOLS 10.1.2.
Do I need to put it to 10.1.3?
If I do that then opatch is set incorrectly.
Also can I assume by default my 10.1.3 Oracle_Home is 10.1.3.5 or how to check that?
If the patch is for 10.1.3 ORACLE_HOME, then you must set sourcing $INST_TOP/ora/10.1.3/
Once you source this file env, question "echo $ORACLE_HOME" and he must return the ORACLE_HOME 10.1.3. For opatch, if you issue "what opatch" then it should point to $10.1.3 ORACLE_HOME/OPatch/opatch Thank you Hussein
Tags: Oracle Applications
Similar Questions
-
General question about the updates and version number
I have a general question about versions and update. I'm new on this and am in the deep end of learning I want.
In vSphere web client, I see the following versions (these are exactly as the seller, he left a few months that I have screenshots in my documentation that match)
Version - VMware ESXi, 5.1.0 1612806
Profile - Dell (updated) ESXi - 5.1 - 799733 (A00)
I am trying to familiarize themselves with the Update Manager and I noticed that there are a lot of patches and updates available.
Lists of Update Manager 5 patches as "Missing" with Red x but directly above them are a list of patches with green tick indicating that "installed" - it is perhaps obvious, but im guessing 'installed' means really installed when displayed on the screen - there is an update installed, labeled "ESXI 5.1 all the update 2-' would be able to tell that it has been installed by the details of profile/version above?
I don't think it's a big deal at this stage, but if I install all missing patches and then the details of the version/profile change in summary screen?
I hope this makes sense.
Thank you
This article allows to correlate the updated version: products VMware correlating build numbers to update levels (1014508)
-
General questions about errors in eventvwr
Greetings.
I have a general question about some failed modules are stored in the Windows Event Viewer.
An error leading to the crashes some applications that I've seen several times now when supporting computer problems is something like this:
(Windows error reporting) Fault bucket, Type 0, name of the event: PCA2, (...) P1: application.exe, (...)I wonder what this 'PCA2. Which is a kind of module Windows handles tasks such as allocating memory or smth. Like this? What could be the cause of these errors (physical memory problems / corrupt swap file / insufficient rights?)
Same Question for the application falls down because of "kernelbase.dll" as in:
(Application error) Failing application: application.exe, Version: 0.0.0.0, (...) Failed module: KERNELBASE.dll, Version: 6.1.7601.18015, (...) Path of the failing module: C:\Windows\syswow64\KERNELBASE.dll (...)What is the .dll file and what could possibly cause kernelbase.dll Fault?
The application can be a bit buggy, but I wonder what could possibly cause these accidents and if there is a way to fix these problems - or what dev did wrong.
The two errors occur mainly on x 64 systems - especially Windows 7/vista
Kind regards
With application errors, the application is called everything first and the module he collaborated with is named second. Normally you should try to reinstall the application if you see not to repeat the mistakes. If this does not work, you go to the forum on the application to see if other users see the same error. There may be a bug in the application.
The observer of the Application event log contains Information reports (event ID: 1001) for errors where the details were sent to Microsoft for review. You will find that there are corresponding to the event ID: 1000 reports errors, either in the system or Application logs. These reports are also included in the center of the Action. Center type action in the area of research above the Start button and press ENTER. Click on the arrow pointing downwards to the right of Maintenance, and then click view reliability history. The errors reported are the Red orbs with a white cross. You can search for solutions to problems, but occasionally you get a significant response from Microsoft.
I can't tell you what it means PCA2. Google did not find a significant result. The reports themselves are not unintelligible, although I have never tried to understand the meaning of a particular report. I have extracted what, in my view, is a starting point of two reports:
Event name: PCA2 = P1: motherboard_utility_onoffchargesetup.exe P2: 4.65.0.0Event name: PCA2 = P1: setup.exe P2: 11.0.0.28844
You have the app in the boredom and the version of the file. These details have been extracted a file of information system to a computer with a card mother Gigabyte. So, you see I have a starting point, if I wanted to determine the cause of a failure.
I will say before you go dive deep into each event ID: 1001 report that many are not easy to even begin to understand. However, they can provide useful clues.
KERNELBASE.dll is likely to be the module with which the application works. You need to focus on the application. KERNELBASE is probably preceded by P3 or P4 in the report?
General remarks on the event viewer:
http://www.gerryscomputertips.co.UK/syserrors5.htm -
Question about patch #8947667
Hi all
EBS 12.1.1
RDBMS 11.1.0.7.0
o/s: oracle enterprise linux
I apply the #8947667 patch to fix a problem.
I have a few questions about reading me this patch:
1. it says to use admsi.pl if im not using adpatch to install this patch?
2. in the post-installation, it says check MoS #145837.1 and apply pre - req.
In the table below, I do not see r12.1.1, so I guess I have not all the patches to be applied?
Clarification, I do the follow-up in that order?
Apply patch #8947667
Run DataInstall
Run hrglobal.drv
Thank you1. it says to use admsi.pl if im not using adpatch to install this patch?
Run 'admsi.pl' to generate your specific instance installation instruction. You should always use adpatch to apply this hotfix.
2. in the post-installation, it says check MoS #145837.1 and apply pre - req.
In the table below, I do not see r12.1.1, so I guess I have not all the patches to be applied?Fix.
Clarification, I do the follow-up in that order?
Apply patch #8947667
Run DataInstall
Run hrglobal.drvFix.
Thank you
Hussein -
General question about the Browser element
Will look for an alternative, I found the Browser element and now I have a few questions about that:
As I am not yet experienced on the Interfaces of Java development, I was wondering if following senario is possible:
Have some HTML Pages which do the job of the Interface.
If you submit a form, the JAva Base program (the Master application) process all Information.
If you are viewing a list, the info is from a json of the Base program output.
As the Communication Server Client HTML, the only difference is, that all communications remains inside the app.
Is this possible?
I can't speak to the idea of dealing with the entry of html, but I can confirm that it is possible for an application program to create a html page and providing the BrowserField for display.
-
General question about the bug fixes and patches
11.5.10 CU2 environment and I'm trying to understand how bug_id, the bug_numbers and patches are associated.
In my case I'm looking for a certain numero_de_bogue because I was told that introduced a change in my environment.
I can find it by querying ad_bugs but how do I determine this patch introduced this bug?
Also, what is the association between bug_id and bu_number?Hello
11.5.10 CU2 environment and I'm trying to understand how bug_id, the bug_numbers and patches are associated.
See website for eTRM.
http://ETRM.Oracle.com
http://ETRM.Oracle.com/pls/trm11510/etrm_pnav.show_object?c_name=AD_BUGS&c_owner=APPLSYS&c_type=tableIn my case I'm looking for a certain numero_de_bogue because I was told that introduced a change in my environment.
I can find it by querying ad_bugs but how do I determine this patch introduced this bug?You'll have to ask numero_de_bogue is ad_bugs table. For a list of each patch fixes, please see the Readme for the patch. You can also view the same OAM.
Also, what is the association between bug_id and bu_number?
BUG_ID is simply a sequence and numero_de_bogue stores the patch number.
How to check if a certain Patch has been applied to the Oracle Applications instance? [443761.1 ID]
Thank you
Hussein -
Surprisingly, I'm almost finished with a full blown control-simulation application, that I've been working on for more than a year now, thanks in no small part of this community. The final step is to run on the simulations of k ~ 8 and be able to meet a simulation and overall statistics on performance. Each simulation is taking about 6 minutes of real time to run (~ 2 seconds of real time per hour of simulation time, valid for 7 days of simulation), as we seek to about 800 hours of your time to simulate. I have 5 computers available and a raspberry 2 Pi these simulations on, I'm looking to set up a kind of compute cluster at the end in about 2 weeks.
The ability of current logging is sketchy; I got about 40 columns of data, and they are written in a spreadsheet with a .xls format tabs-delimited. This works very well for individual simulations, but it would be quite heavy to deal with if I had more than 20,000 of them. I think this must be done with a relational database sort, but my experience with databases is very limited, especially then, when it comes to LabVIEW. Here are my questions:
-Can I create a kind of master-slave configuration where a computer (and probably the Pi) keeps track of the simulations are complete, which are running, and who have never run? Computers slaves ask for simulation settings, and IP would give them to him.
-How should I take care of the database? Each simulation is about 500 k in .xls format, it's about 5 GB of data in all. Computers slaves synchronization from time to time to take care of the redundancy?
-How can I refine my memory + General fresh disk I/O? How can I know which items from my point of view most of them?
-Do you have suggestions for the implementation of clusters of databases relational/computer with LabVIEW?
I have attached a picture of my configuration of logging + the overall structure of the application. It is a state machine with a structure of the event for the interruptions.
-
General questions about the iphone compatible hearing aids, please?
I am a seller of oil field that moves and I need my first hearing aids. I have loss of hearing with a classic old guy and it's average but I'm late for h / a. I'm missing an important part of my life and want to hear the birds sing again! I currently use a 5 s with 9.2 and a bluetooth Plantronics traveler legend. I have hands free for safe driving and especially for taking notes of value and wear it all day. I don't listen to music or videos, no vehicle bluetooth and any other iOS device. The goal is good h/a and the use of good phone.
I am interested in the Halo of Starkey and research scared me a bit of the questions that I barely understand! Googling found a lot of comments, but they seem to all written by agents of sale or competitors.
Where is the microphone bluetooth on the Halos?
Is the call phone stereo or mono?
The function of the hearing aid remains so that on the phone?
In light of my basic needs, all warnings other than the stupid of these things cost?
I am also considering a 6s, this would be a better phone for the Halo team?
Prone glitch or awkward iphone apps?
I'm bored of conversation in the meeting rooms, restaurants are tough and shows are terrible for the hearing?
Generally you are happy with new h/a and halos in particular.
Everything is provided with a newbie would not recognize that you like?
Let me know if you need more details.
Where is the microphone bluetooth on the Halos?
--> The microphone's upstairs behind the part of the ear. If you use the Halos as your ears "on the phone", you still talk in the phone's microphone.
Is the call phone stereo or mono?
--> Is not true stereo, but you will hear the call through two hearing aids.
The function of the hearing aid remains so that on the phone?
--> You can leave the active hearing aid microphones or cut them. It's your choice.
In light of my basic needs, all warnings other than the stupid of these things cost?
--> Feel free to test-drive a few models, unless the first really works well for you.,.
I am also considering a 6s, this would be a better phone for the Halo team?
-->, I can't comment on that, except to say that my experience with multiple iPhones over the years that I have great confidence that each new model is better than the previous. There are a few bumps on the road, but Apple is good enough, solve them. YMMV
Prone glitch or awkward iphone apps?
--> Not, in my opinion.
I'm bored of conversation in the meeting rooms, restaurants are tough and shows are terrible for the hearing?
--> Which has not changed for me. It is the nature of sound amplification without being able to directly select that sounds to amplify and to mute.
Generally you are happy with new h/a and halos in particular.
-->, I am very happy.
Everything is provided with a newbie would not recognize that you like?
--> I like the ability to define a 'from' sensitive geographically, where you can control the volume up down and the bass/treble back. It is a crude tool, but it works.
-
General question about DHCP network configuration
In the past, I've always set up printers on network with a static IP address. With the proliferation of networked printers and progress in the printer driver software, I wonder if the static configuration is always recommended and necessary.
Let's say I have install an Officejet 6500 wireless printer configured for DHCP and it gets an address 192.168.1.7. To continue, the printer driver is installed on the computers all networked and the printer port is listed as HPxxx192.168.1.7. After a break from running, say that the address assigned dynamically changes printer 192.168.1.5, leading to the question... to will the computers still be able to print to the printer who has now a new IP address? Basically, is the intelligent print driver so that he will direct the print jobs to the new address without additional configuration? (perhaps the answer varies depending on the printer model and the operating system of the client)
I have installed HP network printers on a regular basis in a variety of operating system environments. So the question in more specific general. I don't feel a particular problem at this stage. But when I configure network printers in the future, an answer to the question will be useful.
Thanks in advance.
It depends on. On older printers a static IP address is very important on the latest not so much. It is really dependent on the platform on which rests the HP software. HP printers currentlyon market, in theory, do not need static IP addresses.
In addition, when you set a static IP address, I always put one outside DHCP pool. If the range is the range (.2 a.254) I reduced the scope and then put printers outside the pool. This way there is never any conflict.
-
General questions about Cluster 4400 WLC
I have inherited some 4402 wireless LAN controllers and I am in charge of making their ship-shape. So I have a few general knowledge wireless, I have not worked with before wireless controllers and have a few issues with that I was wondering if someone could help me:
(1) how can I check that the primary and secondary controllers are configured for failover without actually performing a test? Both have AP failback enabled, but I don't know what else to check.
(2) they are running code 3.2.116.21. If I want with 3.2 or plan to move up to 4.X?
Thanks to a bouquet. I'm slowly working my way through the docs and the answers to them would of course speed up things.
Hi Johnny,.
I hope things are well with you! The steps required to set up relief AP are detailed in the attached doc. I would always try to provide a Maintenance window to test this point, rather than not knowing for sure :)
WLAN controllers to access tipping points light Configuration example
Now, for your second question, it is likely that you will want to upgrade the WLC to a version more recent code. They have passed through 4.0.x, 4.1.x and newer 4.2.x. 3.2 is a fair way behind. Take a look at the WLC Release Notes;
Series 4400 Cisco Wireless LAN controllers Release Notes
http://www.Cisco.com/en/us/products/ps6366/prod_release_notes_list.html
I hope this helps!
Rob
-
General question about the themes...
Good day to all... A few Questions on the themes and my options for my app:
Im running 4.2.4 on XE currently... and Im using the 25 responsive Blue theme...
Some of my users are commenting that the application takes a bit of screen estate leaving less room for the actual data. They also comment that it's a bit boring! (and for reference, they also use applications created using DevExpress by another development team... (https://demos.devexpress.com/RWA/SalesViewer/RevenueBySector.aspx) for an example...
So, I'm looking for options theme... If I look at the standard themes, I have 4 themes style HTML5 (23-26), which all use a lot of screen space (probably because they are designed with tablets in mind)... But if I want to use a smaller style then Im left with just two styles a bit smaller (21 and 22). Who are both very close and very grey and bland... (let's call it company)...
I have also to search the Web and found very few themes available... There are a few sites, but nothing spectacular... So on my questions:
Ive been told I should not use the existing themes, as are day a non-compliant with new browsers. However, some are very nice, and it's a shame, that they should not be used...
Did someone knows if they will become in the future, is it possible to migrate the? What are the implications of the use of one of the old legacy themes?
Version 5 will implement some new themes?
Are at - it somewhere that Ive missed all good themes 'out there'... ?
What other ways are there to customize the new themes... (and Im not a Web Designer and not a CSS expert either)? Is there a generic method of simple method to change the topics without hours exploring CSS... (for example by changing the general theme to a more obvious color..) My thought is around 5 or six changes their that change the appearance / colors/style throughout the entire application etc...
Any other ideas or thoughts would be useful...
Kind regards
Richard
Richard Legge wrote:
Ive been told I should not use the existing themes, as are day a non-compliant with new browsers. However, some are very nice, and it's a shame, that they should not be used...
As discussed in one of your previous threads, some 'legacy' themes are older than others. I wouldn't really classify a focus standards mode introduced in APEX 4.0 as "legacy", unless you need a complete support on mobile devices. As already said, I would like to avoid completely the themes of quirks mode 8, 10, 11, 13, 14, 15, 16, 18, 19 and 20.
No one knows if they will become in the future
Unlikely. A few fairly important bugs in original/first themes have never been fixed, so it is unlikely that Oracle will spend any effort to change them in the future.
is it possible to migrate their?
Regarding the themes inherited from 'real' quirks mode (marked with a ' * ' and listed above), my advice would be Don ' t bother. IMO, none of them are visually interesting enough to be worth the effort. Migration would imply:
- Adding a DOCTYPE HTML5 at all page templates to the trigger standards mode
- Validate the HTML code for all models
- Modify the HTML code to make it as standards compliant as possible
- Validate the CSS for all style sheets
- Edit the CSS to make it as standards compliant as possible
- The appearance test, dynamic behavior and accessibility in all required browsers
- Fixing of Visual rendering, dynamic behavior and accessibility (HTML, CSS and JS)
- Repeat 2 until levels required compliance to standards, rendering, dynamic behavior and accessibility are met.
It's not trivial.
What are the implications of the use of one of the old legacy themes?
The themes 'true' legacy to be run in quirks mode, there will be problems with:
- Lack of support for some features of APEX 4.x (for example, selectors of the region and interactive reports on the theme)
- Incompatibility with jQuery waiting / requires the standard mode
- Incompatibility with modern browsers and devices (pre - 4.x themes have been designed to be compatible with IE6 and equivalent browsers)
- Incompatibility with modern HTML and CSS features due to running in quirks mode (there is a problem in Internet Explorer more than other browsers)
- Accessibility issues
- Difficulty overall customization appearance due to the incorporation of Visual elements (images and background colors) in table HTML layouts
Designed for Internet Explorer, the situation is much worse. Basically, there is no support for everything that didn't work in IE6 (for some values of 'work'). This means no CSS3, no support for many useful things from the CSS 2.1 (e.g. attribute selectors) specification and no support for the various elements and HTML attributes.
For the themes "inherited" standards mode, there will be fewer questions, probably mainly related to accessibility and support for non-bureau devices.
See also was content to change the Page size for a similar description.
Version 5 will implement some new themes?
Yes.
Are at - it somewhere that Ive missed all good themes 'out there'... ?
Third party themes are available (usually for a price) from various places.
What other ways are there to customize the new themes... (and Im not a Web Designer and not a CSS expert either)? Is there a generic method of simple method to change the topics without hours exploring CSS... (for example by changing the general theme to a more obvious color..)
Probably not. Especially for a novice not familiar with more advanced CSS techniques.
My thought is around 5 or six changes their that change the appearance / colors/style throughout the entire application etc...
This is likely to be amazingly difficult as the new themes make great use of the edge of CSS technical bleeding with several layers of rules to specify the appearance of a component. Heavy duty also includes CSS sprite images, which means that this customization requires editing of image as a substitute or changes to the CSS rules. See the following for examples:
-
Questions about patching a single host
I'm our first update of one of our 5.5 guests since it was originally installed (long term). I searched and was not satisfied with the responses, but just to double check: there will be compatibility issues with all our guests on VMware ESX host Agent 5.5.0 build-1331820 and it is updated with ESXi550-201410001? (VMware KB: VMware ESXi 5.5, Patch version ESXi550-201410001). I ask this for reasons such as HA, vMotion, etc.. (I realize that VMs can run on hosts as long as the hardware compatibility is supported, but my question is specific to the pieces of automation, or any other traps).
In addition, the fix can be installed and then restarted later, or is a reboot required during installation?
Thank you.
Edit: also, that most prefer, using the update or the command line manager?
No problems with HA or vMotion for hardware versions are the same. I usually leave a host or two in production for a day or two for the patch test before spending the rest of the guests. You will need to restart after the patch.
VUM(Update Manager) every time. It automates the entire process and if you have one, use it.
If this answer was helpful, please mark it as such.
-
Some General Questions about the externalization of authentication
We plane to outsource the APEX authentication so that it would be linked to the credentials of the end-user network. Were do because:
It is more in line with the expectations of the users.
It will simplify maintenance by the user.
When the user leaves the ice, their APEX access will be automatically disbanded as their network connections are disabled.
We found some very good articles on the subject, for example http://www.greenit.li/greenIT/Willkommen_files/Oracle_APEX_ProofOfConceptNTLMPLSQL.pdf (other suggestions would be welcomed and encouraged). However; We have a few questions:
The first is authentication and authorization. We get how end users can be authenticated based on Active Directory. However, within the APEX now, create us a new user and specify if who are developers, who, team development Application Builder, SQL workshop, they can access. schemas are accessible to them, etc. This page requires, of course, a password.
How will this work if the authentication is outsourced? We always create the same user in the APEX?
If so, what should we put the password related areas?
If this is not the case, how do we control authorization once authentication completed successfully?
If not, how to make the application available for users (authenticated network) and not others?
If the application allows the user to pass a password (assuming that they are properly connected to the network), what should happen when a person clicks on logout?
Thank you for any input,
-JoeJoe Upshaw wrote:
One of the elements of game here (great requirements above) is to make sure that the APEX applications are directly linked in the cycle of creation/decommissioning of the user of the organization. In other words, the desire is that deleting or disabling a user account in the central directory (Active Directory) have the effect of disabling access to all enterprise systems. We do not expect to allow some "heavy" end users the ability to access the SQL browser. Is there something that can be done, perhaps with the authorisation schemes, which would allow their access is automatically revoked if it network id have been revoked? Can authorisation schemes be applied to the APEX development pages maybe?
Laughing out loud
The only thing that comes to mind is running a scheduled task on your databases which retrieves users APEX in the APEX_WORKSPACE_APEX_USERS view, checks the user account is still valid in AD using dbms_ldap (assuming that the user IDS match, or there is a convention to get from one to the other) and removes , expires or to block those who are not using the APEX API. The problem which is the
To perform this procedure, the current user must have administrator privileges in the workspace.
restriction to the user of apex_util API. Comply with the scheduled job will have to Re: create a session programmatically (that is to say, outside the APEX)., who is skating on or above the line about the API without papers/not taken in charge. This may be frowned upon by the great above and Oracle. (However, in this case it is less of a concern that the use of such methods in your APEX applications, which certainly, I would not recommend.)
-
Hello.
Before using the SDK I have following questions:
-can I develop UI panels/windows customized using my own controls(buttons/sliders/etc)?
-can I get all the info on the current project (imported files, chronology, effects, etc)?
If it is impossible, tell me please who are tools that I can use for this?
Thank you.
-can I develop UI panels/windows customized using my own controls(buttons/sliders/etc)?
Yes. You write a DLL so all the Windows APIs are available for you – that includes GUI objects. If you talk of widgets Adobe then not you must stay within their framework (for example, filters, exporters)
-can I get all the info on the current project (imported files, chronology, effects, etc)?
Partially. You can get calendar information and clip, but it is not talk you about the applied effects.
Download the SDK and look at the PDF document. Also from that look at the API header files it references - they have comments in them that expand information document (especially for things like widgets and what information is available on the project)
-
General question about adding storage Readynas 204
I have Readynas204 on x-raid with three discs of 3 TB sends me some 5.45 TB of storage. Yesterday I added another 3 TB and readynas recognized without any problems but the storage size has not changed. I installed the new drive straight out of the box and I don't think that it should reformat because the drive status is green and the 'Format' button is grayed. The State is green, but that is to say the reconstruction of the volume. My question is I am suppsed to see the storage of 8,38 to size once the volume rebuild process is finished? or I suppsed to see increased storage size rightaway after adding the 4th disc? Thought I should ask this here first before submitting a ticket. Thank you
You should see the larger size when the rebuild is complete.
Maybe you are looking for
-
Can I have my e-mail messages stored on my hard drive with no expiry date?
My mail server deletes mails after two weeks. When I used Outlook, messages are automatically stored on my hard drive without expiration date. Can I configure Thunderbird to do the same thing?
-
HP laptop laptop 15-ac045TU: drivers for Windows 7 (32 bit)
Hello Please give the drivers for the 32-bit version of windows 7. I need following: -. Bluetooth LAN driver (I installed WLAN already) Audio driver any other if possible TIA Sagar Gupta
-
error code 800b0100 during the installation of update KB2804580
Hi, keep getting this error code is there sort of cleaning that involves not getting ripped off for money? Thank you cordially s duffy.
-
Hello, I wanted to buy a gtx 550 TI but I wanted to know if it will work on my computer. http://support.HP.com/us-en/document/c03154290 The problem is that when I bought the 600 and 700 series, he did not work on my computer due to a compatibility is
-
HP officejet software authorization 6700
I can only run HP 6700 software as an administrator on the computer on a windows xp machine. I am able to go into "program files-online HP-online HP 6700-online Bin" and run all programs as other users, but under 'HP Officejet 6700' icons in the star