R3 wiring question

Similar Questions

• Wiring question: PXI-2501 1 wire 48 x 1

  Dear friends,

  I need wiring help.   I have a setup of the PXI-2501 for 1 wire 48 x 1 with a block of connection TB-2065.   I have an analog signal entering the block I want to switch between 5 different LEDs.   The incoming analog signal has two sons (positive & GND), and my Bank of LEDS has 6 wires (5 separate positive & a shared GND).   I have reviewed the documentation section 'NI Switches Help' 'topology, NI PXI-2501/2503 1fil 48 × 1 Multiplexer', but he has not quite figured it.   Can I connect my two ground wires and then connect the rest like this?

  analog input

  + 1-> the Terminal 27

  output LED Bank

  + 1-> terminal 67

  + 2-> 66 terminal

  + 3-> terminal 65

  + 4-> terminal 64

  + 5-> terminal 65

  Also, should I be connecting GND wires on the block somewhere instead of themselves?

  Any help would be greatly appreciated...

  Thank you

  Zach Barnett

  Hello Zach,

  Try to move the analog input + 61 terminal connection.  You can a) connect your two ground wires or b) can connect the ground wires to the TB-2605 terminal block.

  The image below shows the resulting configuration if you connect the wires to the Earth to the terminal block:

  

  I hope this helps!

  Chad Erickson
  Switch Product Support Engineer
  NOR - USA

• PIX, wiring question

  Hello

  We currently have a Pix of the 506th, int external ethernet is connected to our 1720 router ethernet int using a crossover cable. We are trying to replace the 506e with a 515e. In the quick start guide that it is said to use one of the provided patch cables. If someone could confirm the good cable for use between the 515e and the 1720 and also if the connection by using a passive filter would have a significant impact?

  Thank you very much

  J Mac

  You need crossover cable between the router and PIX,

  Use a crossover cable when connecting as devices such as the transition to a switch or a PC to a PC... PIX interface is as NETWORK card in your PC so if you connect PIX interface directly to the router (or directly to the PC) you have to crossover, if you connecting PIX to pass you need straight cable...

  M.

  Hope that helps the rate if it isn't

• Sony cdx-ca700x - cd error. technical help.

  I have this camera and when I put a disc, it will not turn upward and just, the screen lights up and said 'CD' then 'restart' itselves and repeat this beaviour.

  Im a newbie in elecricial knowledge and I know how to do self service, although I can't find any information of what can be wrong with this, maybe the spindle motor? causing some type of short when initiazing the cd player and then restart?

  I love this camera and I'd like to keep a little longer and I see there is no support section on the site for this specific model, I guess this is legacy now then.
  No rule important break if I get some technical know-how of a shoring guy I hope!

  Hello
  Welcome to the Forums of Discussion of the user.
  The only technical info topic, it provides for CD error means the disk itself. However you have probably tried with many store bought the audio CD and get the same problem. Have you tried a reset?
  The reset button is not on the façade but behind it. (see #11) on the diagram page 4 of the instructions for maintenance. http://www.docs.Sony.com/release/CDXCA700X.PDF

  Have you recently removed and replaced your terrace? If so you can experience an installation/wiring question. http://www.docs.Sony.com/release/CDXCA700Xinstall.PDF

  If you have ever dropped your deck (since the start-up failure occurring), and this happens regardless of which cd you are trying to play.
  laser head can be defective and must be repaired.

• connect computers

  It is a pretty basic wiring question. I want to connect to a computer running vista with xp running.

  Now my fundamental starting point is - you connect computers with phone cables directly? They are relatively new computers, a compaq one and the other with vista an acer.

  I have some other questions on this thread have looked at and troubleshoot settings accordingly.

  Thanks for your help.

  I would not connect them with telephone cables.  I would connect it to a router with network cables RJ45 connectors at each end of the sport. Brian Tillman [MVP-Outlook]
  --------------------------------
  https://MVP.support.Microsoft.com/profile/Brian.Tillman
  If a response may help, please vote it as useful. If a response to the problem, please mark it as an answer.

• T420 - Question of disk drive (wired Sata + SAS / Sata 2.5 / 3.5 is possible?)

  Hello

  I bought the T420 PowerEdge with a single SATA drive. I've added 3 more to max on internally wired to 4

  I wonder, do I ALSO have to add the hot swap 2.5 or 3.5 and all have work. I guess I have to buy a special raid card if it is at all possible.

  I want to be able to do is have the 4 cables + start adding the other 2.5 or 3.5 (based on price) and build slowly upward.

  If possible, could you please recommend this card, I have to use to get there?

  Thank you very much

  DellUserMichael,

  Unfortunately, you wouldn't be able to do, it is because the chassis are different depending on the storage option selected. T420 storage options are the

  

  1                                   2                                 3

  • Player 4 option x 3.5 inches: (#1).
    • Cable drive bays
    • SAS and SATA disk drive

  8 x 3.5 or 2.5-inch drive option(#2)

  • Hot swappable drive bays
  • SAS, SATA or SSD drives

  option 16 x 2.5 in drive: (#3)

  • Hot swappable drive bays
  • SAS, SATA or SSD drives

  So the question is the chassis are actually different by the selected option.

  Let me know if it helps.

• Droid wired headset problem/Question

  Hello

  Anyone else have a problem with the volume being really quiet or silent call on wired headset plugged on Droid?

  The 3.5 mm jack seems to work in music mode very well. I can hear MP3s sound level expected, however, when in call volume helmet falls to zero or almost zero level and cannot be increased. Other callers can hear me (the microphone works) but I do not hear their return or sound extremely tiny.

  I tried with two headphone 3.5 mm to 4 different drivers - iPhone and Blackberry - two I have this problem on appeal and at the same time, both are great for listening to music. I first noticed this problem after 2.0.1 OTA update 2.0 original. Recent update 2.1 has not solved this problem.

  I saw a big bunch of "similar sounding but NOT the same" problem/questions about integrated earpiece does not work once the headset is disconnected. I don't seem to have this problem. The problem I am describing applies to the volume wired headset for calls only.

  Thank you very much!

  If you get it replaced make sure you only change the SD card to the new.  Then, you won't lose any of these data.  You can save all your texts on the SD card with an application called SMS Backup & Restore.  The first time you open Market and tap Menu-> downloads it will show you all of your applications.  Paid and free.  If you leave this same screen so before installing all the they will disappear.  Write all your apps prior would be a good thing to do.  I hope this helps.

• Router WRT54GS WET54G bridge question, the bridge to connect to a wired router?

  Hi all

  I have a wireless - g LAN using a WRT54GS router.  The existing wireless devices on the local network are 2 PCs, a TiVo unit (using the TiVo wireless adapter) and 2 WET54G Wireless bridges.  A bridge connects ethernet wired to a network printer.  The other bridge connects by ethernet cable to a reader Blu - Ray Sony BDP-S550.

  Security is WPA2-AES.  so far this works well, believe it or not, but I grew a lot older, making it happen.

  Now, here's what I would do: I would like to add another device LAN cable where the second bridge WET54G connects to the Blu - Ray player.  The bridge has only an ethernet cable connection, so I have to find another way to get the two devices connected to the wireless LAN.

  I have two other devices LinkSys, kicking around here that I can use.  One is a BEFSR41 wired router.  The other is a WAP54G Wireless Access Point.   If I can use one or two of those who in some way, I won't have to buy another camera.  It is the order of the day so far.

  Right now it looks like this:

  Router WRT54GS wireless wire WET54G bridge entry WAN router BEFSR41 son to two LAN devices.

  I have problems performing this work, assuming that it can still be done.  Can I get this config to work, or what I need to add the Access Point where the bridge is now, or...?

  Thanks for your time,

  Big Al Mintaka

  You already have a network working with your existing devices. What you're trying to include in your network is possible and can be done. Rather than plug the cable of the WET54G to the WAN port on the router, connect the cable to the router's LAN port. Disable DHCP and change the LAN ip address in the range of your existing network. It should work.

• Microsoft Xbox 360 Controller For Windows (wired connection) Hardware questions

  Hello, I bought the controller the year last of the Thailand, and I currently live in Bangladesh. It was greater at all times and served me well until today, it started acting weird, all of a sudden.
  It is not a problem of driver for it, but it must be done with the controller itself. See, when the wire is same slightly shifted, the controller disconnects. It's probably something wrong with the wire, correct? But, what do I do now? I can't play anything or use the controller. It works, but the part of the wire where it connects to the controller seems very fragile and disconnects to the slightest budge. Please, any help is appreciated! :(

  Hello

  I suggest you to ask your question in the Xbox forum:

  04 - Xbox 360 Console & accessories

  http://forums.Xbox.com/xbox_forums/xbox_support/xbox_360_support/f/7.aspx
   
  See this article on how to use the forums:
  Using the Xbox technical support Forums!
  http://forums.Xbox.com/xbox_forums/xbox_support/xbox_360_support/f/2127/t/106297.aspx

  Hope this helps, please answer for everything get help on windows.

• Wiring of VMotion and VLan question...

  Hello

  I understand the VLANS and how they work, but I'm not really a 'network' guy and I have a few questions...

  My servers are dl380 g6 with 8 network ports. I intend using two for console service, two for vmotion and the other 4 for my virtual switch of production. I know there is no way of vswitches configuration, but it's my game to date plan.

  My question is how can I configure a vlan and segment the traffic for vmotion? I have 4 ports on my physical switch that I put aside for this vlan vmotion. How can I set this up? Wwhat can I do on the switch and how do I have to create a separate subnet in the DNS? ABLES

  My plan is to pass the cables from the ports on esx hosts I put aside for vmotion to the physical switch ports...

  I'm not too sure about that...

  Thank you! points will be awarded to anyone.

  Hello.

  My question is how can I configure a vlan and segment the traffic for vmotion? I have 4 ports on my physical switch that I put aside for this vlan vmotion. How can I set this up? Wwhat can I do on the switch and how do I have to create a separate subnet in the DNS? ABLES

  What kind of physical switch are you using?  Here is a link to the Cisco documentation to create the VLAN on Catalyst switches.  Create a layer 2 VLAN and create VMkernel interfaces with the appropriate IP addresses.  Don't worry about DNS or Routing and keep things simple, if you can.

  Good luck!

• Great list of 'How To' Questions

  I am a newbie to iTunes learn the tricks of the trade, and I learned a lot of ed2345, who led me to still more questions:

  1. a few songs that I managed to acquire have nothing in the kind column. So that this information will be available on the impressions of my playlists, is there a way I can key this information in me?

  2. I was unhappy to see small numbers began to appear to the left of the names of my songs, and I'm sure that must have been added when I said to organize my library. Is there a way I can get rid of them now?

  3 re the small icons 'cloud' next to my name of the song: one with the line through it saying "duplicate". If I delete one of them, I will always have it on my PC? (This whole business of some things being only in iCloud I do not understand yet.)

  4. a few other icons 'cloud' have an exclamation in them, which means that it is not able to be downloaded to iCloud due to an error. In all cases, there are an extra copy of the file in my library. Is this the reason why it didn't download?

  5. I'm fighting a lot to try to understand how certain things can be on iCloud and others do not. I mainly paid my $25 to Match service so I could keep transfer my playlists (and songs) to other computers on my LAN House (at this point, I don't have an iPad, iPhone or etc..). Now, I noticed that in the preferences that I can share my share my library on my network, which is an Ethernet wired with 4 PC and a Mac. If I check that box library share will I still game?

  6. on the other hand, if I want to share a playlist with a friend who has iTunes, I would want to use game for this?

  7. Finally, I know especially with PCs; I just bought the Mac this month. I find it there any equivalent to the files of Microsoft Explorer, except on an external hard drive, I connected to it. Specifically, I can't find the directory structure accessed by iTunes - a feature that could be very useful for me, for example in the collection in a single folder the files of one kind or a particular type (for example MP3). We're not supposed to do that?

  I hope that the answers to these questions will be useful to others, too.

  Thank you.

  1. You can use Get Info and enter the relevant information yourself. Select the album or the titles you want to edit and press CMD + I (Mac) or Ctrl + I (Windows).
  2. You see these numbers in a separate column in iTunes or in the name column, or in the Finder? ITunes is generally tracks numbers which are useful for playback of tracks in an album in the correct order. In some cases where the unmarked files are imported into iTunes, for example those in .wav format, numbers in the file name will become the name of the track in iTunes and other properties such as artist or album will be missing.
  3. See on iCloud library icons and status - Apple Support. If your support is not entirely possible that different versions of the same track are treated as duplicates so that they should not be. If you have duplicates real then they should be cleaned.
  4. Once again see on iCloud library icons and status - Apple Support. This indicates an error with a load of attempt.
  5. iTunes game is a great service if you want to replace any old purchases DRM with DRM 256 k new releases, like on the continuous access go to the entire library of your iOS devices or keep libraries iTunes on two remote sites in sync without manually copying files to and from portable hard drives. If the goal is simply to move a library from one computer to another, it's usually better achieved by copying the folder iTunes set to a portable player and then copying it in the new computer. A network share can also be used.
  6. You can't easily share a playlist with a friend. Normally iTunes playlists are sorted in lists of references to tracks in your library. They work only import if all the tracks already exist in the same paths that stored in the list. Having said that this is something which can be done in a certain measure with music from Apple, because each user has access to a common library of streaming content from the iTunes Store and their rights to listen to it.
  7. Equivalent of the Mac of the Explorer Windows is called Finder. It should be pretty easy to find. Macs are more lenient if you move the files in the same volume, but usually don't. Let iTunes manage physical files on disk when you store the logical organisation within the library. See make a split portable library for images of the typical presentation of the iTunes library. The images come from Windows, but the General layout on a Mac is the same.

  TT2

• Can I have 2 Airport Extreme with running in a single wired network DHCP server

  Hello friends,

  Just a teenager from the windows world crawling as a child in the MAC world.

  I'm curious to know if we can have 2 extreme airport, acting as 2 DHCP servers in the same local network. I really doubt if it is possible, but still want to have Advisor by experts. I am considering a wired LAN. If possible, please help me understand how this can be done in detail.

  Thank you.

  In fact, you can. The key is to assign different DHCP scopes for each base station in the same IP address space.

  For example, you could assign the range 10.0.1.2 through 10.0.1.99 to a base station and have the other on: 10.0.1.100 via 10.0.1.200.

  You set the DHCP scope or range using AirPort Utility, as follows:

  • Run the AirPort Utility.
  • Select the base and then station, select change.
  • Select the network tab.
  • Select Network Options...
  • The range is set with the option "IPv4 DHCP Range".

  

  But the question would be why would you?

• Can I use my time capsule for wired Internet?

  The fundamental question is, I can connect my time capsule to my wireless internet router and then use the capsule to connect my iMac to the Internet with an Ethernet cable?

  The back story: I have an i7 iMac late 2009 that has worked perfectly until that somewhere around OS x Lion. The update came, and suddenly the wifi became shotty; intermittent connectivity that could last from 2 hours to 2 minutes and often, the computer would suddenly turns off. So, I just took an Ethernet cable from my gateway wireless comcast directly to my time capsule and then another was running for the TC to the iMac. It worked perfectly when the router and the iMac were in the same room. Since then, we moved and there is only a single coaxial connection of work in the new House, and this room that can hold your desktop. Now, I searched high and low for a fix for the problem of wifi, without success; reset the PRAM, change the wireless channel reset wireless packet, you name it I tried it (with the exception of a reinstallation of firmware lion before the airport summary-pretend). I really do not have the money to have someone come run an Ethernet cable through my walls now or to understand the situation of coaxial cable (I tried to do it me but there are about 10 outputs and the room that I want to use seems to actually be connected directly on a former satellite Hughes-NET on the side of the House). Now, this wireless to the dream of the Ethernet connection is my only option... Anyway I can make it work?

  The fundamental question is, I can connect my time capsule to my wireless internet router and then use the capsule to connect my iMac to the Internet with an Ethernet cable?

  The answer is not quite as simple.

  Yes... If your 'hand' wireless router is another Apple wireless router.

  No.... If your 'hand' wireless router is a part 3.

  However, you have two options if you have a 3rd party router that provides to your wireless network:

  (1) add an AirPort Express and it set up to 'join' the network wireless provided by your 3rd party product. Then, the AirPort Express can provide wired Ethernet cable of the Time Capsule and the iMac can connect to the time Capsule using Ethernet as well.

  (2) If you can not run the Ethernet cable... (always the best performance option)... a pair of Ethernet over Powerline adapters could be able to send the Ethernet signal via power lines the existing AC in your House.  In other words, the theory with EoP devices is that you already have the wiring in place, you must just adapters.

  An adapter would be located near your router 'primary' and plugged into an outlet. A short Ethernet cable connects to the router to the EoP adapter.  In contrast, an another EoP adapter is plugged into a power outlet near the time Capsule and a short Ethernet cable connects from the adapter to the time Capsule. Then, the iMac connects to time Capsule using a different Ethernet cable as well.

• express problem airport works as a wired wifi Extender

  I have TW cable for internet in bridge mode and not as a DHCP server.  This is directly related to the port WAN to a time capsule extreme Airport (1-2 years).  The time capsule has a link to 16 port 10/100 netgear switch to one of the LAN ports.  About 3 weeks ago, I added 2 new Airport Express to expand the wifi of my very large House.  I ran the hard lines to the Airport Express as well.  Each express is set to bridge mode and just to extend the wifi network.  The extreme time capsule is the DHCP server.  Everything works fine as long as the couple declares itself to the extreme to the wifi, but this does not solve my problems of scope and speed on the other side of the House that expresses it is installed to cover.

  Problem: When it expresses the airport is not connected I get a ping void 5ms from a computer on the local network to express it and extreme.  Once I Plug one of them in the cable system my time to ping for all devices are very erratic.  From time to time they are in the range 1-10ms, but more often they are in the range of 1-2 seconds and exhale.  Once, I disconnect or hard of the line time to ping back to normal within 5 seconds.

  Troubleshooting attempted so far: even once, I connected one or the other of expresses it to the hard line the problem occurs.  Disconnect it and connect the other the same thing.  Connect them directly to the Airport extreme still same thing.  Connect the express directly to a PC and run ping test, void 1ms response times and no change for the rest of the devices.  Ethernet connected to the WAN port of expresses it instead of the LAN port same question.  Repunched and re made the end of the cable used to one of them, same problem.  Called Apple and they told me it should work, and provided with additional troubleshooting.

  Firmware on all the devices have been updated about 3 weeks after I got them stable on wifi.  Unfortunately I do not have the written down version, but they are all on the same version now.  All devices have a green light on them when just using wifi to talk to the extreme.  When wired in airport utility devices drop the GUI are available intermittently and back.

  Whats to test I can think of to the left: replace the extreme airport time capsule.  Replace expresses it.  Wipe off the network completely and start over from scratch with a factory reset complete.

  Any help would be appreciated, I am amazed as to why it does not work.

  Each express is set to bridge mode and just to extend the wifi network.

  And this... extend the WiFi network... is the problem.  When the Express is configured to "extend a wireless network", it waits a connection without wire of the main router. When an Ethernet signal is applied, this translates a huge feedback loop blocking, network.

  Start over and do a hard reset on each of the AirPort Express devices

  Then for the Setup, use a short piece of spare Ethernet cable... any length will do... and plug it between a LAN port <>- on AirPort Extreme on the "O" WAN port on the AirPort Express Terminal

  Don't forget to make the Ethernet connection before you try to implement the Express. In this way, the "Wizard" will pick up the Ethernet connection and apply the correct settings for the Express installation.

  Use "Wizard" Apple's Installation in AirPort Utility to configure things. When you do so, you will notice that the final configuration screen will indicate that the AirPort Express is set up to "extend with Ethernet', who must confirm that the correct settings apply to the Express.

  

  The first Express is now properly configured. It turned off and move it to the remote location where it is needed. If your Ethernet cables and the Ethernet switch works correctly, so too the Express will work properly.

  Implement the second Express exactly the same way as the first, except him give a different device... as Express2 name, for example... to keep things straight.

• wired devices is more capable of connecting to time capsule

  Wired devices connected to the time capsule apple are assigned is no longer an ip address and not able to connect to the internet. Always wireless devices connect very well without any problems.

  Gites assign addresses IP not work

  The capsule is connected via PPPoE modem of fibre broadband BT openreach

  Any ideas?

  Wireless devices get the private IP address of the TC... Please check.

  for example... the TC in standard configuration as a router will use 10.0.1.x for the first device is 10.0.1.2

  The values of the gateway and DNS will be 10.0.1.1 on the laptop... check and report what are the numbers.

  On the ethernet connected machine... see if you get anything... Otherwise, set an IP address static, for example 10.0.1.201 with gateway of 10.0.1.1 and the same DNS... Does it work... If this is not the case, change the Google public DNS. 8.8.8.8

  It might also help to post some screenshots of the configuration of the TC if you still have questions... tab tab and internet network more summary page.