R31 reading SDK / links library and store SDK

Similar Questions

• Access to library and store SDK API with simple editing?

  Hello

  We just started to evaluate the DPS for our first project.

  In our project, we want to access the device ID and send it to a server. Apparently, the library and the store SDK provides this feature (DeviceService).

  My question is now:

  We can access this SDK with the single edition of DPS? Or do we need the professional edition or enterprise to use this SDK?

  Thank you!

  Best

  Matthias

  No, there are specific features of business of DPS. Library and store SDK cannot be used with simple edition or Pro of the DPS, so you'll need to get the company DPS to use these features.

• Reading a text file and store it in a table, guard return 0.

  Hello, I have an application where I need to read the speed and rate of a text file. For this application, I use a myRIO NEITHER and I want to save the text file on the drive the myRIO aboard in the tmp folder. I simplified my request to isolate the possible problem and I will attach a sample text file and my VI is used.

  Overview:

  I use a myRIO project because in my real application I myRIO VI of PWM and encoder. I noticed that my problem goes away when just open the main VI and run the application in LabView. My problem then that chairs the VI on a project myRIO folder.

  To address the issue:

  My question is, when running the VI of the hand of a project myRIO folder everything works as it is supposed to, but when you open the text file in my Subvi, it returns 0, as if nothing is in the text file. Now if I open the VI outside myRIO se project file it works just assumed that when X = 1, it opens the text file written data in a table and then close the text file. I can't understand why he reads nothing in the text file executing the main VI of a project of myRIO and when I use run to highlight one can see it opens the text file and then returns nothing. The text "test" file must be placed in the tmp folder on board the myRIO to validate my way.

  Is there a way to fix this?

  I assume because I use a myRIO project I can't access the file text, or because of how LabView?

  Any help is appreciated, thanks in advance!

  You don't have your son wired error upward.  You're files showing error functions?

  What context are you running VI when you are within the project and what context from outside the project?

  My suspicion is that in one case, you run on your PC, the other on the cRIO.  Your file exists only on one device or the other.  And also that when you change your PC for the cRIO, your file path must change.  It's very strange that your watch VI access you the disk R:\.  I bet that the R:\ car n does not exist on your cRIO.

• Library of information on screen and store SDK or reading SDK in a folio

  There is conflicting material regarding the new features of the r30 screen:

  adobeDPS.dialogService.displayCustomWebview(url)

  Since Adobe TV Information & text on-demand Notifications screen of Colin Fleming, he States:

  Analog to digital blown inserts, but

  -Access to the store/library API creates new opportunities in an article

  

  However, this ability is in a conflict of other articles by Adobe, in which only the reading SDK is available from an Information screen when loading in a folio.

  Adobe Digital Publishing Suite help, using HTML and JavaScript APIs to extend DPS, he States:

  For HTML content in a Folio, for example a HTML article or a Web content overlay, you can refer to the read API. The read API includes some of the features available in the library and API of restoration and the geolocation API, camera, your calendar and detection devices.

  Any HTML content you specify in DPS App Builder can reference library and the restore API. HTML articles or Web content overlays in a folio can refer to the read API.

  

  Adobe new APIs and features r30, including folio, item metadata, and calendar of events navigation:

  The API which can access the Web view depends on where the webview has been invoked. If called from within the app, the webview will have access to the library/store API. If called from a folio, the webview will have access to the read API. If your transparent webview has been opened in a custom tab, you need to include the library/store API. If it was open from a folio, you need to include the read API.

  
  

  Because this API is accessible from the library/store and read API, this API is available to DPS Enterprise and Professional DPS customers.
  

  Information display within a folio with the library and the SDK from store loading fails silently, unable to bring up the display of web pages.

  Loading information display within a folio with reading SDK is functional.

  This online video of Colin is incorrect:

  "Access to the store/library API creates new opportunities in an article."

  The information contained in the articles are correct. Specifically, if you launch the information screen of in a HTML article or a Web content overlay, you reference the read API. If you launch the information screen of a banner of law, custom library or a custom slot, you reference the library/store API.

• Reader SDK: is it possible to see what text the user has selected?

  I use Adobe Reader SDK with c#, by looking at the characteristics of communication monitor.

  I can open a document in the reader and allow the user to the user the reader as select text tools, etc.

  Here's the problem: I want my application to know what text that the user has selected.  And I would like to know the name of the field that the user has selected, not only the text of the field.

  PIA of Microsoft Office went something like this:

  currentDocument.GetSelectedText ();

  Is it possible to do with IAC or javascript or plug in the Player SDK features?

  If this is not the case, can it be done with the Acrobat API?  I've looked through the two sets of documents and have not found what I needed.

  Thanks for any help!

  To write a plug-in for Adobe Reader, you will need to go through 2 separate steps.

  Step 1 - Download the SDK Adobe Acrobat (from here http://www.adobe.com/devnet/acrobat)

  and build your plugin against the Acrobat product, following the documentation to ensure that you use only the API that does not exist in the player program. The documentation tells you what version of the Adobe ACrobat program or Reader is required for the function and that the function can be called in Reader.

  Second step: apply for a certificate of reader allow your plug-in to be loaded by the player, the link is on the same web page as the link above. This step can be started until you have created your plugin, and I recommend that start you this process before you develop your plug-in like Adobe may refuse to give you the certificate in which case your development would be lost.

  Only once you have authorization form Adobe can you do your job of plug-in with the reader app.

  Once you have done these two steps there are a lot of people on this forum who can help you with specific problems you may encounter.

  If you are not sure of having the knowledge to build the plug-in, there are a lot of people that you can hire to create the solution for you.

  HTH

  Malcolm

• My Media Player is not let him come his pass. I tired FixIt and followed all the links there and I still can't get media player to read.

  My Media Player is not let him come his pass. I tired FixIt and followed all the links there and I still can't get media player to read suggestions?
  original title: Windows Audio recording

  Hello

  (1) what version of the Windows operating system is installed on your computer?

  (2) did you of recent changes to the computer before the show?

  (3) what is the file format of the files you are trying to play?

  (4) you get an error message?

  (5) you are able to hear the sound of Windows and other applications?

  (6) that Microsoft Fixit ran?

  You can try the following methods and check if it helps.

   

  Method 1: No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

   

  Method 2: Problems running Windows Media Player

  Open the troubleshooting Windows Media Player settings Troubleshooter by clicking the Start button, then Control Panel. In the search box, type Troubleshooting, and then click Troubleshooting. Click view all, and then click the Windows Media Player settings.

  See this link:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 3: Solving problems run Windows Media Player library

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-library-Troubleshooter

• Download picture of URL link and store the Image in a Local folder in BB10 Webworks

  Hello

  I want to download the image of URL link and store the image in a local folder in Webworks BB10.
  But I did not get the code for this.

  If such knowledge code or have any solution then please help me...

  Thank you best regards &,.

  Laurent Subudhi

  NitishSubudhi wrote:
  I go through this code... but it is throwing the exception. That is to say "ReferenceError: Webworks is undefined '." "

  According to the device/operating system, you need to add the extension of your installation of WebWorks as explained here for OS SmartPhone BB or PlayBook OS.

  To use read the samples provided, they must work somehow. When I worked with the extension on PlayBook I only copy + pasted the provided source code and changed the attributes for the function call:

  // You need to define "remotePath", "localPath", "onProgress", "onError", "options" like shown in documentationblackberry.io.fileTransfer.downloadFile(remotePath, localPath, onProgress, onError, options);
  

  For OS SmartPhone BB the function call looks like this:

  // You need to define "options" like shown in documentationwebworks.io.FileDownloader.download(options);
  

  All think that all information provide here, try to follow and cela should operate.

• How to get the current folio of inside a folio with reading sdk

  Hello

  I am currently trying to get the current folio and its value of filter in the reading sdk (custom Navigation).

  Section 2.31 there is a "ReadingService" with "currentfolio" (Adobe DPS - reading SDK 2.31: adobeDPS-ReadingService: JsDoc reference).

  However, this Service has disappeared to 2.32. "Folio", itself is difficult.

  My question is: How can I get the current folio and its filter?

  I tried with adobeDPS.Folio / adobeDPS.Folio () filter and so on but nowhere.

  Best regards

  Andy

  Just use in any case, it's probably an error of generation of paper when we have updated the docs with the Windows platform tags. I'll ask the team to take a look.

  Neil

• I need to read barcode using visa OR and store it in file .text

  Hi all

  I need to read to Barcdode using communications series (OR visa) and store it in .txt) file...

  (I have attached series vi read file... here I can able to read codes to bars, but quickly it goes to zero...)

  Hello

  have you checked on the examples of series communication delivered with Labview?

  In addition, if you want to send the data to the port of reliable succession, I suggest to use a cleaner approach - pack your data of barcode in a significant data structure. The data structure would look like AUT like this: 1. start of data (described at the beginning of the data packet), 2. data bar code, 1B. end of data (described at the end of the data packet) and 4. checksum of data (apply only 1 a or 1 b, whatever you prefer). If you plan to add additional information to your package of data later, this would be really easy to change. This way you can also check if the data got lost during the transfer, notify the user.

  You can take a look at how to read this data package here (set up a loop of producer-consumer, although not necessary):

  https://decibel.NI.com/content/blogs/kl3m3n/2014/10/17/serial-data-send-with-CRC-cyclic-redundancy-c...

  Best regards

  K

• How can I read items in four tables and store them in variables?

  Greetings,

  I have 4 tables which I read to control an autonomous robot vehicle as instructions.

  I must be able to read the first elements of each table and store in separate variables 4 (direction, speed, angle, distance). Wait until the first statement has been executed. Then I move on to the second elements of each array. I'll repeat this until I went through all the elements. I am struggling to figure out how to do this?

  Please note:

  -The number of items in the tables is always the same, although the number of items varies as can be less instructions or more.

  For example, a full trial takes 1st element of table 1, table 2, table 3 and table 4 and it builds something like: forward, 10, 20, to the left. This will then be the robot moving forward at a speed of 10 over a distance of 20 and then turn left. Once this done then it contains the elements 2 and so on.

  Please find attached my VI that reads a text file and creates 4 berries.

  Thank you.

  stanm13 wrote: Unfortunately, I don't think you understood my question.

  Then, I would say a) you don't understand the answer or b) you explain well enough.

  To make each element of an array, using a loop FOR with autoindexing entered is the way to go.

  

• How to extract the same song, several times using different bit rates or formats and store all the digital music files in WMP 12 default on the same HDD music library

  Using Windows Media Player 12 (w/under Windows 7), "can I ripping the same song, several times, using different bitrates & and/or formats and store all the digital music files in the music library by default WMP - 12, on the same hard drive?

  1.) #1 goal: tear up the same song repeatedly, w / "different rates" as a WMA file.

  2.) #2 goal: tear up the same song repeatedly, w / "different rates" as an mp3 file.

  3.) #3 objective: NOT to each subsequent copy (version) of the song, deleted & and/or replaced by the previous version of the song [even].

  4.) question Bottom Line Up Front--> is Windows Media Player 12 (included with the Windows 7 operating system) are able to achieve '#1 objectives; #2; & #3 above?

  5.) details/example: I want to tear the piece "Maria Maria by Carlos Santana" to my laptop as a Windows Media Audio [WMA] file.  In addition, I would like to rip the song 'Maria Maria' three several times with 3 different bitrates in format WMA; and, as an MP3 file.  Therefore, my final result wished (after the extraction process), will take place the four 4 audio files split up as follows: (a) 'Maria Maria by Carlos Santana'--> Format: file WMA; Ripped @128 Kbps bitrate.  (b) ' Maria Maria by Carlos Santana'--> Format: file WMA; Ripped to the "Variable bit rate; (c) ' Maria Maria by Carlos Santana'--> Format: file WMA; Ripped commissioning "Lossless." and (d). 'Maria Maria by Carlos Santana'--> Format: MP3 file. Ripped @256 Kbps bitrate.

  6.) my preference: I do NOT want to rename the file (s). {for example, 'Maria Maria by Carlos Santana' renamed/changed for--> "Maria_Maria_by_Carlos_Santana_128kbps.wma",...} 'Maria_Maria_by_Carlos_Santana_256kbps.mp3 '; etc.}.  In addition, I am not concerned about the additional disk space that will be consumed after multiple copies of the same song with different speeds of transmission and different formats.

  7.) my experience w / Windows Media Player 10 (w / the operating system of Windows XP): using WMP - 10, my goal (s) described above is not a problem at all.  Simply insert the CD purchased by Carlos Santana, containing the song "Maria Maria"... Select the desired Format (WMA; WMA VBR; WMA Lossless; or mp3)... Select the desired flow rate (WMA... 128/160/192kbps_mp3: 128/192/256/320 kbit / s; etc.) ; and click on the "RIP" button to start the copy process on the hard disk of of Carlos Santana's "Maria Maria".  This process (w / WMP-10) would result in having the same song, copied on the hard disk, with levels of quality different "audio" (via the different bit rate settings); regardless of the format (MP3/WMA) which was chosen.

  8.) my experience w / Windows Media Player 11 (w / the operating system of Windows XP): using WMP 11, to described above of my objective (s) could not be reached e-a-s-i-l-y.  The problem with WMP - 11 - in short - which was after the desired selection "Rip settings" tab 'Options' of WMP - 11 (i.e., Format & Bit Rate) and heart-wrenching piece wanted to {'Maria Maria by Carlos Santana'} a moment later/second, WMP11 remove / would crush the previous version of the song [even].  Therefore, the program would NOT allow the user to have multiple copies of the same song on the hard drive of the PC; which obviously restricts a user to have the freedom to choose what level of quality digital audio, they prefer to listen to.

  9.) the ability to have multiple copies [at my descretion] of the same song (on my hard drive) with different bitrates and formats in my music library, is important for me because it has a direct impact on "how I enjoy MY music ', and in what form (audio quality), I choose to listen to my music.  {For example, when I exercise and listening to my camera, digital audio player (Zune), a song ('Maria Maria by Carlos Santana'), will usually be torn off at a lower rate due to the unit of capacity reduction of storage - compared to the storage capacity of notebook PCs/desktop/external hard drives PC.}  However, when I listen to my music through my home cinema or entertainment system (which contains a hard disk dedicated with a large storage capacity), I prefer to load the entertainment system with digital music files that have been ripped to WMA... with the bit being rate-setting is for the: settings "WMA Variable Bit Rate" or "WMA Lossless.

  10.) there you have it.  This is my first post in this forum.  I hope that [detailed] explanations, will be sufficient to encourage these "with knowledge & the hands on experience" using Windows Media Player 12 (as well as with WMP-10/WMP-11 respectively), by providing a [step] "How-to"... "solution to my situation.  It would be highly appreciated.  I'm looking forward-'the solution' - and relevant suggestions & and/or community feedback regarding my request for assistance.

  * Thank 'All' (that would) in advance... For your time & Assistance *.

  Certainly, you can, but I would say that they be in different folders, for your convenience as well as Windows.  You can create one for each debit/format, then you will know who is who.

  In Windows Media Player, on the toolbar, select Tools, Options, Rip, and then select the flow you want first, rip music, then change the folder (higher on the same tab) and rip again... and so on and so forth.

  When you are at home on your home theater, you can use the 320 bitrate folder, when you transfer to the Zune, you can use one of the lower bitrate files (although I personally tear it up to 320 and let the Zune reduce as he wants, even with the iPhone via iTunes, hard drive space is not really a problem here) my server has several hard drives, and I can always add more if and when space is low!

• Accidentally deleted a dynamic link library (DLL) file and the need to replace one possibly other system files - what is the best method?

  I did a system restore to a point before that my main user account has been established.  I had to set up a new user, and then it was suggested that to copy all the data of the user "existing" to the newly created user.  When I did this it's not well at all and some DLL files have been corrupted or deleted or not connecting correctly to the user of your choice.  I actually then did a restore of the system to the last restore point.  However, given that SR does not change the data, I was stuck with the wrong DLL and other system files.  I thought I had stupid test because I had backed up data.  I tried to restore to an earlier point (using Windows backup and restore).  Unfortunately the restore will not work and I get the following error: "a systematic failure of the initialization of the Dynamic Link Library (DLL).  I need to repair or replace the corrupt to get the system back and then protected files again.  I'd appreciate any help!

  Thank you

  In the case that he is a protected system file, you can check if you can always run the System File Checker

  http://support.Microsoft.com/kb/929833

  You can boot from a system repair disc to retrieve an image from the previous system that you have made.

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

• Assign a language of document in Acrobat Pro XI and store in Adobe Reader XI

  Hello

  I'm having a problem with Acrobat Pro XI and XI of Adobe Reader. This happens when you assign a language of document to a PDF, Acrobat Pro XI file.

  Whenever I attribute to a language of document in Acrobat Pro XI (I do this by setting the language of the document in the Advanced tab of the file properties dialog box [file > properties]) and open the document in Adobe Reader XI, the language of the document is not preserved. Instead, if I check the playback Options (located in the same place where I set the language of the document, the Advanced tab of the file properties dialog box [file > properties]), there is an empty space next to the 'language '.

  I'm sure I'm doing things. After all, before closing the document (after the assignment of a language of the document), Acrobat Pro XI wonder if I want to save the changes made to the document. Also, if I open the document in Acrobat Pro XI (after assigning a language of the document) and checking playback Options, it says language I selected next to "language". The problem is that the language is not maintained in Adobe Reader XI, I need whether for accessibility reasons.

  So my question: how to assign a language to the document in Acrobat Pro XI and store in Adobe Reader XI?

  Here is a screenshot of the same open document in Acrobat Pro XI both Adobe Reader XI to show what I mean:

  

  Thank you for your help.

  Assistive technologies (screen readers AT - aka) rely on what's in the tree structure of a tagged PDF document. Try to set the parent top of the language of the structure tree.

  Be well...

• All my files turned .link files and I can't download anything including .zip it's impossible to read .exe files

  I have no internet connection on the laptop (windows xp) after I got this virus any. All my files turned .link files and I can't even open the help and support. When I open the Control Panel, it opens but the icons will lead me not to anywhere. I tried to type in the "Run" dialog box, but it will load and then stop, leading me to nowhere. Evrything is transformed into files .link except internet Explorer, my computer, my documents, the trash and another that I forgot, but even if I open internet, it is useless, since I lost the internet connection. I can't open anything to restore my internet connection. I tried restoring the system also, but it's been so long that it would not return to where it was fine. Also I tried to restore to when it was still very well, but it does nothing. I even tried the safe mode and it is still the same. I tried to format the Local drive, but it tells me to close something that may have been watch the computer or soemthing like that. I formatted the back towards the top but not the local drive. I found the windows xp CD but when the window opens to reinstall, and then when I click on reinstalling windows xp, it won't be going anywhere. The other links will lead to a place, but reinstalling windows won't open. I tried to use the system startup and you press on enter when he went to the Conference of the disarmament/something something and it still does nothing. It will say like taking files from CD or something, but it leads to nothing. I really want to just my laptop to remove everything so I can reinstall windows.

  See if this allows you to format and reinstall XP...
  http://www.YouTube.com/watch?v=Wf2Ffm33DhA

• MAC - impossible to find "Pictures folder" / Iphoto photo library and open the Iphoto Application at all

  Hi all

  I have Apple devices for a few years now, but I still find it difficult to understand the system. I want to put an end to that, so I finally registered.

  I try to look at the tutorials and read the forums, but I can't find concrete answers to my situation.

  First of all, in my application of Photos of my MacBook, I remove hundreds of photos and videos, then I go to recently deleted screen and I delete them all permanently.

  However my disk space is the same before under 'Storage' summary when I check "to about this Mac". I restarted the Mac and waited for days, the space does not release upward.

  Then I read in a forum and found the following answer:

  Your photos has not deleted because they still exist in iPhoto or Aperture, whatever you use. Photos saves disk space by creating links to the already existing files in iPhoto/Aperture, rather than duplicate. This means that if you want to delete a file, you must make sure that it has deleted all.

  If you can live without ever using iPhoto/Aperture once again, go to your Pictures folder and delete iPhoto Library and Aperture Library . In this way, the only copies of your photos will be those photos, and removing free space on your computer.

  
  

  The questions are the following:

  
  

  (1) after reading this, I decided to look it up in my pictures folder in the Finder to locate the iPhoto library, however it is not there on the left side, after reading the forums, I still cannot locate the iPhoto library anywhere.

  (2) in case I finally find my iPhoto library and delete it, are the images that I see now in the deleted Application Photos?

  (3) another curiosity, when I try to open IPHOTO, the following message appears:

  

  And then after trying the 'search App Store':

  

  I did not need to actually use my iPhoto or App Photos in particular, I do not yet fully understand the difference. I want to just my photos to be stored in ONE place and when I take hours to remove them permanently, get my rear space and do not learn, they still exist elsewhere (iPhoto library).

  Also please help me understand what am I supposed to do with the iPhoto application now that gives me these error messages.

  Thank you very much!

  (1) after reading this, I decided to look it up in my pictures folder in the Finder to locate the iPhoto library, however it is not there on the left side, after reading the forums, I still cannot locate the iPhoto library anywhere.

  The images folder must be manually added to the sidebar.

  Open the Finder preferences:

  • Click anywhere on the empty office to bring the Finder to the front, then go to the Finder menu in the main menu bar, open "Preferences".
    Click the tab of the sidebar and add all the items to the sidebar, you want to see.

  

  Now, open the images in the sidebar folder in the Finder.  Is your photo library in iPhoto there?

  Then drag it to an external drive to make a backup copy, then delete it and empty the trash.  Accidentally delete the photo library.

  (2) in case I finally find my iPhoto library and delete it, are the images that I see now in the deleted Application Photos?

  No, the photos in your library of Photos and the iPhoto library are separate files.  It was created by hard links.

  Hard links are new files, which use the same entry in the table. They store the contents in blocks of same on the disks, so the entries are not duplicated, but if you remove one of the linked files, the others will remain. The storage will be released, when the last linked file has been deleted.

  See this link: Six colors: the (hard) link between iPhoto and photo