R5500 fanless video and high output

Similar Questions

• Qosmio G20 = video cable component and videos in high definition with Pinnacle

  Dear everybody
  I bought my Qosmio G20-120 of the Poland that came with D video cable SCART. This cable is only capable of transferring video signals (CVBS) which is pretty useless, because Qoismio already has a S-video out... What is the best simple video production I can get to SCART.
  According to www.toshiba-europe.com Qoismio is supposed to have video output component. But it comes with cable SCART instead. I always try to make this component video cable D-video of the Distributor. If I don't succeed, does anyone know if and where I can buy this cable in Europe? Or is it possible to make a video component with the D-video out D-video cable with cable SCART?
  Everyone last tried the channels high definition DVB-S on Qoismio using USB 2.0 DVB - S TV Card.Any opinions on Pinnacle PCTV 400e?
  Thank you

  Hello

  Sorry, but I don t agree with you. SCART in my opinion is always better than S-Video. As far as I know cable SCART can transfer image and sound and picture just S-Video. Am I wrong?

  In my view, it's great that laptop Qosmio has two video ports and each use can make a choice.

  Another way your ad is a bit confusing to me. Qosmio G20 includes a section on the port (D-video) and as far as I know the original cable must be provided. You can see on this page http://support.toshiba-tro.de/KB0/TSB4A00TK000MR01.htm

  Using this cable you can easily connect your laptop to the TV.

  Also check this http://support.toshiba-tro.de/kb0/FAQ5300XK0012R01.htm document
  It can also be interesting and useful to you.

  Good luck!

• How to have separate video and audio over HDMI output Lenovo Thinkpad T410

  I have lenovo T410 and wanted to connect it to my TV high definition. Earlier had problems, but after buying SIIG Displayport to HDMI its job very well. In fact the video and Audio can now be read / listened to on my HDTV via HDMI. However, I have a separate 2.1 computer speaker system, which has much better sound output than my HDTV. Now if I want to see the video on HD TV via HDMI and audio output to speakers for laptop (connected to the 3.5 mm wired 2.1 speaker system), how to do that. I went to SmartAudio settings in the Control Panel, but there is no option of separates HDMI audio to the speakers only.

  I don't want to buy another cable with RGA Audio Converter 3.5 mm female port. Please suggest a direct solution.

  in win 7 do a right-click on the speakers on your lower right corner icon, select playback devices, click on speakers, click on set default, click OK and it should work (sound must come from your computer speakers or the computer 3, 5mm jack)

• What is a module secure to download youtube video and audio, something, virus and malware free?

  What is a module secure to download youtube video and audio, something, virus and malware free?

  We are not really discussing comparisons add-on here, but note all formally welcomed the module extensions hosted on addons.mozilla.org and available from the will of the User Interface of Firefox were considered and be safe, secure and virus-free.

  • Use the Menu button-> Add-ons-> [search all add-ons]
    (Or key in the address bar Subject: addons)
  • Search example (you can do a targeted search the better your own machine)
    • With > 5 M high to the users of the list is Video DownloadHelper

  NB. There may be legal as possible & /or copyright with downloading some documents issues, but this is out of scope of this support forum discussion.

• I'm looking for laptop 64-bit video editing high definition

  I am looking for a * 64 bit laptop computer *, mainly for video editing high definition, but also for the occasional game.
  I read on the Qosmio 64 bit machines, but I don't know which model.

  It would be powerful enough for video editing or they are intended more to play the game?

  Any suggestions concerning the ideal models would be welcome.

  Thanx.
  Zen OKI

  Hello

  What do you think of the Qosmio G50 series?

  I read that the Qosmio G50 is the portable entertainment has ever created more advanced than Toshiba.
  It was equipped with the Toshiba Quad Core HD processor, which was designed for the normal high standard definition video conversion-enhancement.
  You can use any commercial DVD movie and can watch the movie in stunning HD.

  In addition, the CPU and the GPU are really powerful and you could play more new generation of games that are on the market.

  See this page for more details on G50 series:
  http://EU.computers.Toshiba-Europe.com/innovation/Home/-> Products-> Qosmio-> G50 series.

• After the upgrade to Windows 8 on a HP Pavilion dv2799: sound, video, and mouse is stuttering

  My HP Pavilion dv2799 comes with Windows Vista and has always worked very well. However, after I have recently upgraded to Windows 8 32 bit, now sound, video and even the mouse is stuttering.

  The laptop has a NVIDIA GeForce 8400 M GS, and my approach has been to find the correct graphics driver. However, I don't find the driver on the HP website. I thought that maybe I need to use a HP change NVIDIA driver? To remedy this, I installed the latest NVIDIA driver, 314.22, from nvidia.com.

  Regarding the Conexant High Definition SmartAudio 221 sound that I can't find any other driver as 4.36.7.60. According to the website of Conexant, Conexant provides no drivers for PC audio products to end-users.

  It can be the cause of the performance issue? How can I solve the problem?

  OK, back to the other end of the scale.

  Try this one...

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=0&prodSeriesId=1847703&prodNameId=1847704&swEnvOID=2096&swLang=8&TaskID=135&swItem=ob-56504-1&mode=3

• Satellite P200 1EE problems with playback HD video and USB ports

  I bought the laptop Satellite P200-1EE dixons for and I'm happy with it in many ways, but the main reason I bought the 1EE P200 was because of its potential to play and edit the video high defintion.

  I can't seem to play or watch video clips high definition without them being clumsy and with a frequency of images at 3 frames per second, and not the 30 frames per second, he must turn.

  The clips I'm playing are some MOV files record on my camera at 1280 by 720 resolution at 30 frames per second and the two Quictkime player and Realplayer they simply are not quite smooth. Given that the laptop has a DVD player high definition and a high-end graphics card ATI HD 2600 ispecifically intentional for high defintion watch a DVD high defintion to 2040 by 1080 I do not understand why he should fight with playback relatively low resolution video files.

  I would edit 720 video high definition and the speed of the processor, the speed of the bus, ram and graphics card should be enough for this high defintion video simple editing, so if he can not even play video high defintion, what chance does he have to edit video high defintion?

  After only 2 days of working completely fine Vista Vista completely crushed and the computer refused to restart. I had to use the recovery disk and completely wipe the hard drive. not a good introduction to vista which, apart from that, it was very slippery. After you have installed Office 2003 it works completely fine on Vista Home premium

  Does anyone have suggestions or solutions?

  Hi Daniel

  To be honest you message confuses me.
  The recorded movies (.mov files) are not format true high definition as in movies on HD DVD or Blue ray!

  I think you need to convert these files first in a format mpeg mov or avi format and then you can try to play with ordinary players like WMP, Real player, etc.

  Here are some useful tools;

  Converts mov to mpeg
  http://www.radgametools.com/binkhcon.htm

  Convert mov to avi
  http://www.JakeLudington.com/ask_jake/20051003_convert_mov_to_avi.html

  With regard to the question of the USB.
  Try to remove the USB port on the Device Manager and restart the laptop. After restarting again the USB ports should be recognized again and the USB driver should be updated.
  In most cases, this enables the USB flash drive.

• Sync video and analog data on the same GUI

  I am programming a request that will be followed and video recording IMAQ and given DAQ.  Is there a way to synchornize data during the processing of data on a GUI Viewer displaying the message?  I'm looking to start the video as if it were alive, and have the data displayed on a graph as if we were saving the data of this video.  A simple shared timestamp will work?

  How about tiara?  I have seen no support for files video tiara...

  eatherton says:

  How about tiara?  I have seen no support for files video tiara...

  Of course Diadem supports video files

  -Pre version 10.0: use Clip DIAdem.  See the knowledge base synchronization of data with video clip DIAdem.

  -Version 10.0 or higher: see the example "Video and data synchronization" (located in the finder DIAdem example under "Display and modification of the data")

• YouTube and audio DailyShow is static electricity on all browsers but msnbc video and audio is good.

  System sounds and files mp3 audio are good.  But, the wma and flv files are all static with

  Windows Media Player. Can I download a youtube video and play with VLC
  Drive. All other media players I've tried is all static.  I think I understand
  VLC Player has its own audio codecs.
  Here's the story: machine to my Windows XP Pro and its edge

  (Realtek) worked for two years, then began to get some static.

  and then, died. All audio was static city all the sounds of the computer.

  Installed SP3 to get all of the updates and run diagnostics

  could not detect any problems. Then, installed a Rocketfish 5.1

  his computer back box and got sounds (wav files), dvd-audio and MP3

  audio. But, all the audio to youtube FLV files including and all the WMA files are

  always static. Tried another card of Rocketfish without change. Deleted

  Drivers Realtek, disabled in BIOS Realtek, etc.. Uninstalled and

  Rocketfish reinstalled, etc.. I tried K-Lite Codecs and other codecs

  Pack. Nothing helps. Then I updated to Creative Sound Blaster

  Titanium with hundreds of MB of code and still have the same problem.

  Uninstalled UAA High definition Audio. No help. Still can not play

  YouTube or the Daily Show of any browser. (Video is good but the audio is

  (But static), the audio on msnbc video is good.
  Thanks for your suggestions.

  Hello

  We will run the next Fixit tool.

  Solve the problems of Windows Media Player video and other media or library

  If this does not resolve the issue, I would say that you post your question in the Forums Windows Entertainment and Connected Home .

  Windows Media Player - Windows Media Player - Windows/entertainment and the connected home

• Audio, video, and game controllers missing in vista 64

  Hey there,

  I'm having a problem with my card mother dx58so and sound.  The speaker beside clock icon has a red X.  He says that there is no audio output device installed. When I go into Device Manager it isis is not even an option to extend a audio, video and game controllers. It is completely absent.  I've updated to a vista 64 SP2.  I also tried to install the drivers from microsoft, intel realtek and realtek themselves.  I called intel and had them go through everything with me also including enable/disable in the bios, updaste chipset, bios, drivers.  They also had me uninstall the driver that is at this time the audio, video and game controllers disappeared.  Any help would be great, otherwise I'll probabley try to reformatt HDD and reinstall windows.

  Hello zusa313,

  Thank you for using Microsoft Vista answers Forum!

  We would like to get a better understanding of this issue so that we can better help you on this question.

  Both your video and sound on Board (part of the motherboard) cards or are they another card installed in one of the slots on your system (stand-alone)

  Which version of the service Park you have on your PC (SP1 or SP2?)

  Have you checked to make sure that this motherboard is compatible with the operating system you are using? You can check it out here CENTER OF COMPATIBILITY of VISTA

  If your device is compatible, your problem may be getting the right driver or a defective unit, or you need to just run all the necessary update on your PC.  I suggest you run Windows update to get the latest updates for your PC.

  Second, boot your PC in a boot environment in MINIMAL MODE to make this issue is not caused by a background program and reinstall the latest drivers for your devices

  To perform a clean boot on a computer that is running Windows Vista, follow these steps.

  1. click on Start, type msconfig in the Search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the Load Startup items check box.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click disable all.

  5. click on OK.

  6. When you are prompted, click restart.

  7. after the computer starts, check if the problem is resolved.

  If your problem is resolved, follow the section How to determine what is causing the problem in the KB article to narrow down the exact source.

  http://support.microsoft.com/kb/331796. In addition, refer to the section on how to restore your computer to a Normal startup mode

  David O
  Microsoft Answers Support Engineer
  Visit our and tell us what you think.

• Windows Media Player enabled at startup interferes with sound, video and other sources

  Hi, this is a known issue since I've had this laptop second hand! But always thought that one of the USB flash drives was the cause (Sandisk Cruzer Micro U3), since the mouse cursor blinks like crazy until everything is fully charged and becomes stable. It is clear now Windows Media Player peut cause this conflict for two reasons. A single, "WMP" is pre-activated on startup? (as confirmed with the Task Manager, he just goes there and "sparkles" like crazy). And two, "WMP" wants to seize all media, he can find by default automatically; I "can I" accidentally put as such (during an update of Windows that you are prompted), not sure?

  A purchased late 2009 "Pinnacle PCTV Pro HDTV USB Stick" product had never worked right? Cause the software "TVCenterPro" was unstable, and TV shows have been troubled and often froze. OEM is finally released with a great release of TVCtr Pro5x ("TVCenter6"), and it works much better! But I could only install it in trial mode until I found the CD product key.

  I uninstalled and reinstalled TVC6; but no TV (or FM radio) channels can be found in the full activation mode? And better actually worked in "trial mode; which didn't make any sense? Pursuit of the investigation, that's when I discovered "WMP" behaviour above; and forced a complete process tree removal. I did the same thing to TVC6, which cound not 'see' peripheral integrated audio from the laptop in full mode? And on reloading the program, it worked! TVC6 can now detect the device audio and pick up channel and stations by their identifiers as he did in "test" mode There's more to refine what I should do to properly operate the TVCenter6. But I need to know why "WMP" havoc on audio, video and other sources, hardware and software!

  The 'specifications' are Internet Explorer 9 (new), Vista Home Basic SP-2 and Windows Media Player 11.0.6002.18311. The embedded video is ATI Radeon Express and the audio Realtek High definition, the processor is Intel Pentium Dual Core & so on.

  * The system doesn't have a virus etc and is up to date. Has anyone met a similar behavior with Windows Media Player?

  PS: I just start WMP(11x) again, and of course, the mouse cursor begins to blink like crazy immediately. The only solution is to make the highest (force the tree closed the process and prevent WMP launched with the use of the other audio video).

  It turned out that the real problem was much worse than I thought! I had to reinstall sound, video and other device drivers; Windows Management Framework Core for Vista x 86 [(bundle 32 bits: Windows Powershell 2.0, Windows Remote Management 2.0 ("WinRM"), Background Intelligent Transfer Service 4.0 ("BITS"))], etc.. And preparation tool system update to find and fix registry I didn't know were there? (42 total, only 4 keys were fixed. The other 38 were removed one by one, after finding a way to change the access permissions; not even administrator has for Vista Home Basic; for files also). Addition of a few executables of line at the command prompt (indicated in respective Microsoft etc. support messages and articles online); and what you said that I had already done all troubleshooting (failed?). After working on it for two days, the system suddenly broken to normal; and works better than ever. Windows Media Player (11 x) is working great now and is no longer remains in memory when opening and closing several times; hardware audio and video is surprisingly better; even the works of volume mixer! And that weird State "crazy cursor" that caused the blue screen error if allowed to go on long enough are gone! (even after the insertion of misc USB flash and other devices). Windows updates found nothing to "change" other than the periodic updates. I also ran the command line to stop several languages of the poll"(tout ce qu'il s'appelle?), and"Windows features"appears much faster than the overall speed and performance." All that's left is to tweak "Windows features" for optimum performance; Therefore, the problem is solved!

  Please note: I can't turn off the storage management removable and Remote Differential Compression etc to speed up Vista even more (not). TVCenter6 works fine but "hangs" in memory (at the end).

  For these questions, please go to the related post via this link: optional features of Windows cannot be enabled or disabled, hidden Windows updates cannot be uninstalled.

  Support: Please add a "Mark" button for the problems solved by the user (and when Microsoft does not provide the answer, as is the case with all other messages); so I can close the nets, I opened as 'resolved on mine'.

• WMC LIVE TV PLAYBACK VIDEO AND AUDIO SUTTERS AFTER ABOUT 20 MINUTES.

  Windows 7 ultimate using WMC for watching live TV and have a problem that seems to elude a hotfix running. I see others have this problem in other forums (green button) without a real difficulty.

  While watching live TV, after 20 minutes the video and the Audio begins to stutter badly. Video looks almost like stop action framing approximately two times more than a second and the audio is true chopped until you can't make out what is said at all. A quick fix for this is to pause for about 5 to 10 seconds. Sometimes this only will fix this during about 30 minutes, then it starts again.

  This only effects Live TV and occurs on any channel.

  Someone has an idea of what could be the solution?

  My setup is below:

  Operating system: Windows 7 Ultimate 64 bit SP1
    CPU:  Technology AMD Phenom II X 4 945 78 ° F Deneb 45nm
    RAM: 16.0 GB Dual - Channel DDR3 @ 533 MHz (7-7-7-20)
    Motherboard: FOXCONN ALOE (CPU 1) 81 ° F
    Chart: ATI Radeon HD 4650 (MSI) Standard (1920x1080@60Hz) monitor

  Storage: 931 GB Western Digital WDC WD10EADS-65L5B1 SCSI Disk Device (RAID)
    Audio: Realtek High Definition Audio

  The game, February 6, 2014 17:24:52 + 0000, grandfather of the Zaidens wrote:
   
  | It does not normally start until live TV play between 20-30
  minutes. I guess I'll have to sit down and see if it is triggered by commericals,
  but it does not ever seem to start until after he plays than the length of
  time, so my guess is the first game of commericals isn't the cause.
  |
  |
  |
  | Another thing, it doesn't affect all Extenders. I have three xbox
  and a combined echo and that has never been duplicated on them.
   
  Maybe a driver issue. See
  http://experts.Windows.com/FRMS/windows_entertainment_and_connected_home/f/114/t/95622.aspx
  to confirm, if you look the same on the computer and an xbox
  Extender, you only see it on the computer?
   
   
   
  __________________________________________________________________________________________________
  Barb
   
  MVP Windows Entertainment and connected home
   
  My Blog - http://digitalmediaphile.com/
   
  Connected world Blog Reader Windows 8 App Barb-
  http://apps.Microsoft.com/Windows/en-us/app/barbs-connected-world-blog/02f35769-52bf-461C-b1d5-06e54a58d298
   
   
  Windows and Surface drive Windows 8 App community
  http://apps.Microsoft.com/Windows/en-us/app/Windows-and-surface-community/0abb150e-D287-47d4-837E-9fa51f485ad7
   
   
   
  Please mark as answer if that answers your question
   
   
   

• "The device has changed and no output channel is present. Open Audio hardware preferences? »

  Hello

  I installed an infusion of SSD and fresh install of Windows 7 64-bit, including the installation of Adobe CC with premiere pro and other related applications. My audio works fine, I have a portable speaker connected to the back of the audio 'line in the green plug' at the back of my office, have not had any problems with her.

  However when opening Adobe PP for the first time I get the message "the device has changed and no output channel is present. You want to open the Audio hardware preferences. At the opening of the entry default preference reads "no devices available (does not). I was unable to change the value by default using the box entrance, but was able to change the default output. I changed the default output to ' speakers (device 2-high definition audio) and after that I got an error that read "sorry a serious error has occurred which caused Adobe PP stopped." We will try to save your work)".

  Is anyone able to help with this, I don't know how to set up the audio setting is all new to me. Also do not know why this has happened given my audio works fine in any other program that I use on my pc. Any help from an expert on this forum would be greatly appreciated. Cheers, Joel.

  

  My first guess is to check and possibly update the audio driver.

• PSE video and audio go out of sync on finished product

  A very strange problem has developed.  I have a PRE project that plays perfectly into the program itself, but when I exit the project start audio and video in sync but go not synced to the first place where the audio and video clips are spliced.  To be precise, I have a file mp4 audio (.m4a) synchronized with a .mov file.  At the first break, where I spliced m4a, m4a and .mov to .mov, the project is in phase when I play in the video window of PRE.  But when I have the project output, video and audio go out of sync at the first break.  Other facts:

  • PC, 8 GB of RAM, W7, all installed updates.
  • By using the same file .prel about a month ago, it worked well.  (I tried to do a DVD extra of this project, when the problem came.) The only thing related to the video that changed on my machine was a new version of Studio of GoPro.  Just in case, I uninstalled from my computer and the problem of PRE is still there.  Could GoPro have left something it's messing things up?
  • In this case independent of the output - DVD, mp4 format, etc.
  • If I insert an empty picture at the junction stay video/audio synchronized until the next splice point, when he goes back out of sync.
  • It happened first in PRE9, but I also PRE13 (who reads the PRE9 files) and the problem happening there too, in the same way.

  I am completely puzzled, especially because this same project file perfectly synchronized DVD in the past produced.  Any suggestions will be appreciated.

  R.H.L.

  Thanks for the clarification of your question.

  Complexion all the case is if this problem is limited to a single specific project file.

  Here's what I read since you wrote...

  You say that your audio synchronized to export this file in a project is present for Premiere Elements 9.0/9.0.1 and elements 13/13.1 first.

  These programs do not seem to share/use the same built in programming of the export. And, further, you say that there is this audio desynchronization if burn disk or export the file to one of these versions at this time. Is this correct?

  Even if the problem is not manifest prior to export, which has been described above point to the project file. Have you changed anything in the project settings or export settings in this file of project for good time / wrong time - courses of transitions, component files software plug-in, flow? And you say that look very detailed to the timeline, the content of this one project has revealed no change before and now after? You write

  Would such a program have changed or are damaged?

  From what I just wrote, could the project file has been corrupted, but...

  If you want to look at this as a corruption of program, then you will need to take uninstall, cleaning, reinstall to 9.0/9.0.1 and 13 to dismiss this idea and replace any missing files of exporting program. But, once again, we are dealing with a single project or all your projects with this problem.

  Please consider.

  Thank you.

  RTA

• Sony Handycam DCR-DVD505: failed to get video and audio

  Adobe first assessment.  If all goes well useful for users of Sony DCR-DVD505.

  Objectives:

  -----------------

  (1) obtain videos from handycam Sony DCR-DVD505 first elements

  (2) drag and drop various clips in the sceneline view

  (3) Insert menu marks

  (4) burn DVD

  Stuck at step 1, getting video from handycam, impossible to get video clips (with audio)

  ----------------------------------------------------------------------

  First test: NO SOUND.

  --------------

  Sony DCR-DVD505 burns a (1.4 GB) DVDs for recording.  After "completing" the drive, the media can be imported into the computer.  Streaming is supported by Windows XP driver but is no longer supported in Windows Vista.   Indeed, Vista Service Pack 2 (SP2) does not even recognize the camera as a DVD player!  Then demoted to Vista SP1 and the Sony Picture Motion Browser to import media into the computer in the form of MPG files.  Each MPG file is a video (corresponding exactly to the camera market record during the shooting sequence).  Then opens first Adobe Elements 8.  Media get to import all MPG clips in "organize."  Sliding and dropped various clips... Insert a menu or two and... the DVD burned.  PROBLEM: VIDEO OK, BUT NOT AUDIO (?).  MPG files on computer play very well (with audio) within Windows Media Player.  Read all sorts of nonsense about why Adobe Premier (probably older versions) does not work with 'low-quality/tablet"MPG and must be a particular type AVI so...

  Second test: Capture VOB directly

  -----------------

  Forget the camera.  Insert the DVDs directly into the computer's DVD drive, create a new project and followed directions for 'Truth on VOB' http://forums.adobe.com/message/2117743 and ' tools to convert/DVI" http://forums.adobe.com/thread/415317.  I loaded the VOB directly and dropped into the timeline as advised by the second post (only hitch being the first VOB pertaining to the DVD menu is not recognized and none is needed).

  However, the file > export is always grayed OUT (unusable).  And status at the bottom right seems to be looping through the 'provision of background. "  SHOULD I WAIT?  In all cases, the entire video is displayed as a single continuous stream and what I want are the clips from the camera?

  Then I tried the Prism (again according to the second forum post mentioned above).  He has just done something to deal with 30 minutes of video and crashed without explanation--saying that it was an error in the conversion in the end.

  This conversion of AVI's even a good idea?  How would return my clips?

  Bottomline.  My DVDs and imported MPGs plays fine in Windows Media Player.  However impossible to extract clips from the camera (with audio).

  Dawg, I have Sony DCR-DVD305 and used successfully for some time with PE7, with few problems, once I had a workflow by nailing.

  I think that the 505 is basically the same camera, with some additional features.

  This workflow has worked for me in the past, so I'll pass that along:

  Sony to PC MPEG browser.

  MPEG for Windows Movie Maker, output to DV - AVI, taking default settings.

  DV - AVI any PE7.

  This should also work for PE8.

  By getting Cyberlinks PowerDirector v7, my new workflow changed to this:

  I take the min-DVD directly from the camcorder to my PC and capture the disk via Power Director.

  PD will convert the VOB directly to DV - AVI Type 2 on a single pass.

  I then load this DV - AVI in PE7.

  (PD v7 was preinstalled on my new HP PC, or it can be purchased from Cyberlink).

  Other options to try:

  Copy the VOB directly from the DVDs on your PC and Prism can convert these to AVI.

  Or load the VOB or Mpeg in PE, then use it to convert it to AVI.

  (Export to DV - AVI with PE8 is made with SHARE/PC, not to export on the file Menu, which is grayed out).

  I had many problems working with Mpeg and VOB loaded directly to EP with limited success.

  So if you can get a proper conversion to AVI outside PE, I found this to be a better approach.

  Display the results, if this works for you...

  Note: Another thing, if you are working directly with the VOB to PE, including several VOB on a single DVD, you can encounter problems of out-of-sync between audio and video. In this case, consult this link to Muvipix:

  http://muvipix.com/phpBB3/viewtopic.php?f=38&t=2469: