R7000 and latest beta 1.0.6.40_1.1.90 small cosmetic bug
Hello
I've recently updated 1.06.40. For now, it seems much more stable than previous versions of 1.0.5 and 1.0.6.28
I still have it running for a few days without rebooting and load havy p2p to see if she stalls like the previous versions
However, the speed seems even in NAS Tester tool and EXTENSIVE network for my 250 MB/s connection
One small thing: Arlo option appears only under the basic configuration, not under Advanced. I missed it because I never use the Basic tab!
Also, if I disable the Arlo, wifi connection, associated with the Arlo remains active until the next reboot of rooter
Other than ipv6 broken, I don't see any other problems with this firmware. I'll give you your comments in the next few days for the stability of long-term under a load heavy p2p
Hi Chopin70,
Please check this official firmware for stability.
http://KB.NETGEAR.com/app/answers/detail/A_ID/30695
Tags: Netgear
Similar Questions
-
Question
Sometimes of firefox loads a page slowly with a single click, but if I double click it loads very well? Is there a reason or a fix for this? Overall, I really like Firefox. I always use the latest beta version.Hi Jlhillhouse,
It is difficult to solve the problems of the computer without knowing all the details. You should look at the link I sent you and especially to Firefox is slow - how to make it faster. I don't know any known issue as you describe, it's probably a very good bet for a response.
-
Latest beta 3 b3 121207 installation problems
Just downloaded the latest beta 121207, uninstalled previous versions 100107 and installed a new. All seem normal, with a clean and efficient Setup log.
However, could not run the generator after a little exploration and research of the error log, noticed that a bunch of com.adobe.flexbuilder.xxxx directory was missing (compare to the previous beta installed) a com.abobe.flexbuilder.flex_xxxxxx directory was empty. Tried to install twice with similar results.
Finally, I went back and installed the old version to continue working.
(1.) I'll re-download and try.
2.), but why no error messages and clean the elements of (successfully) log file actually missing?
Hope that this report is useful for others and group QA.
Yoav text textFor the record, I checked a clean & successful :) install the 1201207 on another system (W2000 Server) who never had FB installed on. This time, the installation was successful and FB3 works OK.
Thus, the inability to install the new version is due to the environment on my system and could not be that there have been some "leftovers" of the previous version of FB3 when it has been uninstalled.
In any case, the symptoms are that some directories are not copied and remain empty (for example, com.abobe.flexbuilder.flex_xxxxxx) -
What is the difference between the Firefox for android and Firefox beta
I noticed in the store of Google play there are two applications of Firefox. What is the center of the difference between the two Firefox browser for android and Firefox beta.
Firefox for android is just the regular and stable browser that is recommended. Beta of Firefox for android is the next version of firefox that is in beta (test yet, but almost ready) step and is not ready for an official release because he has a few folds and fixes to do. But firefox for android beta has some of the features the most recent Firefox should be released soon as an official version.
The current version of firefox for android is 34.01.
The current version of firefox for android beta is 35.0. -
What is the difference between dawn and the beta?
What is the difference between dawn and the beta?
Beta is the next version of Firefox that is due to be released in 5 weeks, and Aurora is the one after that--like an Alpha version of development.
-
Hello
I R7000 and PS4 and I continued the PS4 in the PSN network disconnection.
I tried to activate UPNP port forwarding and I tried to put the IP address of the PS4 in DMZ without success.
I can play for no more than 5 minutes. After this time, I am disconnected from the PSN network.
If I use my old active router (Asus RT-N66U with the PS4 in DMZ or UPNP) I have no problem.
Can someone suggest me a solution?
Thanks in advance.After a few hours of play, it seems that the problem is solved. In the end, I think it was a fault of ps4, in this sense, that if you reset the NET installation when you change the router probably ps4 'rember' something of the old router and the connection became unstable.
I still have the problem of date and hour, yesterday I contacted netgear support, but the solutions they suggested me do not resolve the problem. -
Y at - it a newsletter I could sign up to get the latest beta versions of Microsoft?
Y at - it a newsletter I could sign up to get the latest beta versions of Microsoft?
No, it's not...
-
Is Digital Zoom precision on the Nex 5N and al better than simply cropping in post-production?
The main question in the subject line. If the answer is 'no', what is the new clear Image Zoom. It provides nothing that I can't do post-production with cropping?
If previous digital zoom and turn off zoom of the image are not better than cropping, software like The Gimp would be sufficient, or would I need pro-level photo editing software?
Thanks in advance!
Hi lporrel,
As the camera will only m the image zoomed in and you might get a correct exposure for this small part of the image, this is a good option to use the digital zoom.
When you use the digital precision, Zoom auto focus feature works with priority on and around the central region.
While in the cropping a picture, its quality will remain identical to the original image, but the size will be smaller.
If my post answered your question, please mark it as an "accepted Solution".
-
Is there a timeline when Flash Player 22.0.0.203 comes out as ready to use and not beta?
Version 22.0.0.209 was released earlier today and includes all the fixes in version 22.0.0.203 beta.
-
I bought a new and a better computer, but now it is impossible to reinstall my CS6
I bought CS6 in 2012. I bought a new and a better computer, but now it is impossible to reinstall my CS6. I get an error during installation (see below)
and some fetchers do not work (as when I try the recovery tool "save for web" I get: the system can not fined the specified path) .
What can I do?
This is the log I get at the end of the installation:
Exit code: 6
Please see the faults and warnings below for troubleshooting. For example, ERROR: DW050...
--------------- Summary ------------------------------
-0 fatal Error (s), 12 (s), 0 warning (s)
-Payload: {92D58719-BBC1-4CC3-A08B-56C9E884CC2C} Microsoft_VC80_CRT_x86 1.0.0.0.
ERROR: Error 1327.Invalid Drive: F:\
ERROR: Install payload MSI failed with the error: - 1603 Fatal error during installation.
MSI error message: Error 1327.Invalid Drive: F:\
-Payload: {7E91BB17-16A1-42CE-9502-D6C98BE04920} PDF settings CS6 11.0.0.0.
ERROR: Error 1327.Invalid Drive: F:\
ERROR: Install payload MSI failed with the error: - 1603 Fatal error during installation.
MSI error message: Error 1327.Invalid Drive: F:\
-Payload: {AC76BA86-1037-0000-7760-000000000005} Acrobat Professional 10.0.0.0.
ERROR: Error 1327.Invalid Drive: F:\
ERROR: Install payload MSI failed with the error: - 1603 Fatal error during installation.
MSI error message: Error 1327.Invalid Drive: F:\
ERROR: DW050: the following payload errors were found during the installation:
ERROR: DW050:-Microsoft_VC90_CRT_x86: installation failed
ERROR: DW050:-CS6 settings PDF: installation failed
ERROR: DW050:-Microsoft_VC80_CRT_x86: installation failed
ERROR: DW050:-Acrobat Professional: installation failed
ERROR: DW050:-Adobe Mini Bridge CS6: installation failed
ERROR: DW050:-standard Adobe 2.0: installation failed
Hello
Please visit https://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
Hope that helps!
Kind regards
Sheena
-
When I downloaded the latest version of Firefox, the print was so small, I could barely read. What should I do to enlarge the characters without losing a bit of my toolbars...?
== When I downloaded the latest version of Firefox, the print was so small I could read bvarely. What should I do to enlarge the characters without losing a bit of my toolbars...?
print is too small
-
Screen of remote desktop: fonts and icons of the remote desktop window are so small
I try to connect via Office server2012 windows remotely.
The remote computer is a Server Terminal server where at least 240 users are connected.
The fonts and icons of the remote desktop window are so small, all other users who are connected to the same server have no problem with the font size or the size of the window. everything seems normal
But when I connect remotely, the size of the window and the police are so small. I can't use any application on remote because of the size of the font.
Please suggest...
Hello
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
-
get the e french instead of the question mark or frame them
Emailing to my question mark and supervise the work on the first, then the small e accent when arrives to her frame them and the capital E with the accent comes for the question mark. Can you tell me what is the cause and how to fix it. Thank you.Hello
I suggest you according to the question in this forum and check if that helps:
http://windowslivehelp.com/forums.aspx?ProductID=15
It will be useful.
-
Remote Desktop screen resolution
I've recently upgraded to a Windows 7 laptop from a computer in Office XP.
On my old machine, I use a VPN clent and Remote Desktop connection to use my work computer (my company uses XP on their machines). If I try to connect from my computer Windows 7, fonts and icons of the remote desktop window are so small they can barely read. Change display options in the settings of remote desktop doesn't affect the size of the window, not the resolution.
It is a problem because I am stuck using my old system to work remotely.
Any ideas?
All you have to do is to reduce the resolution of the screen that you use to connect to your Remote Desktop Session. More the higher resolution and the characters will be on your screen, and when you connect to Remote Desktop. In my case, I lowered the resolution of my screen to the House for the resolution of the screen in my office. It works perfectly. To reduce the resolution follow these steps:
1. click on start
2. click on Control Panel
3. under appearance & personalization - click on adjust screen resolution. You may get a message indicating that your resolution is not at the optimum, but don't worry you will still be able to see the letters on your screen.
-
Why so slow and fat out put for only the clip size small 1 sec?
Why so slow and fat out put for only the clip size small 1 sec?
Hello
I just apply simple ray tracing 3d in AE and then try to make it by media encoder
Meia encoder says 4 hours so he could make
my clip was 15 sec not hd (I do not change all of the settings in media encoder to make)
then I cut it to 1 sec encoder media took 20 minutes to make
out put
4.12 MB
.avi file
1 sec
Why what is happening
This only happens when I apply ray trace 3d not for others
Thank you
As they say - "a picture is worth a thousand words" thus:
This is a screenshot of the small video clip (full HD) with curvature layer with RayTracing (see render estimated times):
And the same video clip with 3D classic (without RayTracing) and effect of Warp Mesh (rendering was so fast that he even showed no estimated time - but you can see the final rendering time):
So you almost 1, 5 h with RayTracing vs 11 dry without.
Maybe you are looking for
-
Java applets on "Allow and Remember" shows nothing (Ubuntu)
I tried the Java 7 update to Java 8 because of the safety block Firefox did the plugin Java 7 - However, even after I deleted libnpjp2.so(as root) in order to update the plugin and make a new hard link to the 8 libnpjp2.soJava, he always tells me tha
-
By mistake, I downloaded firefox 3.6 until I realized that my system does not support it. Now, firefox starts and replaced my old version of firefox in applications. Now what should I do?
-
Configure the search box on My DataFinder with vbscript
Hello I use the following vbscript script to load data into data tiara Portal: Define dataFinder = Navigator.ConnectDataFinder ("My DataFinder")Set queryForm = Navigator.CreateQuery (eAdvancedQuery)queryForm.ReturnType = eSearchFileCall queryForm.Con
-
HP Pavilion Notebook: right click on area does not
I bought this laptop a few weeks ago as a replacement for my old Asus. I can't the 'right area click' on the touchpad to work at all. I went into the control panel to access the touchpad settings and times enlarged and reduced the size of the 'zone
-
How can I change the Windows Media Player the default player for?
I have windows 7. I want to keep windows 7. One morning when I open my computer, I found that Windows 10 had been installed without my agreement. I would not accept the terms and windows 10 has been removed. However, they have changed my settings