R7000 problems play 2 ps4s all same same game party

Hello

We recently bought the nighthawk R7000 router running firmware version V1.0.7.2 2.4.24 and filled our gateway 2wire ISPS router (ISP said it was the only way to connect and use a new router) to it and put it up for all the devices in our House. Now, before we bought the nighthawk we had no problem playing together, but with the recent purchase of an android minix neo u1 area, we wanted a better smart router. So husband and I started to play fate with some friends and played for less than an hour when all of a sudden the ps4, I was using completely out me. I restarted the ps4 and returned joined and started to play only to be deported again. The next time I'm on, I was unable to get to my husband and he couldn't join me. I looked online for solutions and went into the settings of routers. I checked and UPNP is already enabled and I have reset the QoS settings to the factory think because I had activated the QOS to prioritize the two different ports that have been using the ps4s that could be the problem. I have you will also know the two ps4s are wired in and I don't know offhand speed but we have improved our internet package for a better service and wirelessley is the speed upload 1.97Mbps and the download is 24.76Mbps so wired should be faster than that. If anyone knows what I can do to get the two ps4s running smoothly play together to the common Nighthawk? Thanks in advance

Thanks for your response James. With a little help from netgear support and looking for a little me. We found our best option was to enable UPnP, enable IPC now that ps4 support and remove rules that I had set the port forwarding. Now, we can play set and have the children watching Netflix or streaming media in multiple areas of the House with no problems at all!

Tags: Netgear

Similar Questions

  • When I open a PDF file, I get the following message "invalid plugin detected Adobe Acrobat reader DC will leave" I reinstalled Adobe DC but still the same problem, it happens with all PDFs. Any advice much appreciated.

    When I open a PDF file, I get the following message "invalid plugin detected Adobe Acrobat reader DC will leave" I reinstalled Adobe DC but still the same problem, it happens with all PDFs. Any advice much appreciated.

    Hi Stephen39,

    Do you have any 3rd party plugin installed for Adobe Reader? If not, close all instances of Adobe Reader running and delete the entire folder to: C:\program Adobe [version] \Reader\plug_ins.

    Now go to control panel > programs and features. Locate the entry for Adobe Reader X and choose to repair the installation.

    If you do not have a 3rd party plugin installed, try to uninstall them and see if the problem is related to the same. If it works, let me know what plugins have been the origin of the problem so that I can have a look.

    If all goes well, this should fix things.

    Thank you

    Nicos

  • Qosmio X 770-135 - problem playing Battlefield 3

    Hello

    After buying a new computer laptop x 770-135 and use a few hours he came to a conclusion: the PC is too heavy (full of programs and functions) that is slow and the other is that you can't play Battlefield3.

    I've been looking through this forum and others have the same problem.
    I bought the same goal for the games and he (laptop), it refers to the characteristics and the box itself.

    Some users talking about marketing campaign, talk more updated issues some drivers, but the truth is I wanted to solve the problems...

    I went to nvidia.com site and I downloaded the 296.10 driver-notebook-win7-WinVista-64bit-international-WHQL. And has already installed the Battlefield3 to play, but in some parts of the game and gave error until I decided to restore the factory settings.

    If anyone has the same problem and was able to solve...
    What was the drivers installed? BIOS, NVIDIA Da, Da INTEL or other?

    Thanks for the answers and questions

    Translation with Google Translator

    Hello

    I have the X 770 - 11 c and use the latest drivers from Nvidia.com/notebooks FRO the GTX 560 M and Battlefield works wonders on Full HD with everything turned up...
    I run the latest form of the Bios Toshiba and all drivers are updated according to the Tosh or manufacturers.
    Market software installed at the factory, including all the stuff of nagware toshiba as sflashing to keep messages telling you he updates etc and my laptop is still the fastest, I used.

  • Solitaire opens the same game

    When I opened lonely (I would call it the classic) it always opens the same game that is played partially. It's like it always opens to the same saved game, but prompt the asking to play a saved game does not appear. Before this problem rather than open a partially played game it always open to the new set of unplayed even.

    Added later: trying to solve this problem, I went to the tab options Solitaire somehow the box 'always save game on exit' has become verified as well as the box "always continue saved game".  Even if I do not save games on the release somehow he opened to them. Funny how that happens sometimes.

    I'll watch the response and report back here if this solves the problem.

    Thanks to all who have responded to this post.

    Added later: DavidMCandy thank you. I'll do an answer here later to tell how it came out.

    Delete the folder under here

    "C:\Users\\Saved Games\Microsoft games.

  • Repeat the same games

    When I play on 'Games' (hearts, Solitare, etc.), the program continues to repeat the same games (I should win all the time, eh?).  How can I reset the program of the games.

    Hello

    The games provided in Windows Vista are not games at several levels.

    However, you can improve your scores by playing the games each time.

    If you are having problems with one of the games, then you can reinstall games using Windows Turn On or Off features.

    a. go to Start and in the search type "or turn off Windows features turn on."

    b. click on 'Windows turn features on or off".

    c. find the games and uncheck the mark before the game that you want to uninstall.

    d. restart the computer.

    e. once the computer is restarted, go to the same location and place a check mark for the game to be installed. Restart the computer once more for the game is installed successfully.

    See: http://windows.microsoft.com/en-us/windows-vista/Learn-about-Windows-games

    Hope this information is useful.

  • Static instead of sound - whenever I'm playing the sound, all I get is static

    Whenever I'm playing the sound, all I get is static, if the volume is 100 or 5. What can I do to recover my sound?

    Hello

    1. what operating system do you use?
    2. you use headphones?
    3. the problem happens on the speakers and the headphones?

    Check what operating system you are using. See the link below:
    http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

    If you use Windows 7, then follow these steps:


    Step 2
    : try using the troubleshooting of Audio playback and check if it detects the problem.

    To open the troubleshooter of Audio playback:
    a. click the Start button and then click Control Panel.
    (b) in the search box, type troubleshooting and then click Troubleshooting.
    c. under hardware and sound, click on the audio playback problems.
    d. follow the instructions contained in the resolution of the problems.

    Refer to this article:
    http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter


    Step 3:
    disable the optional speaker effects that are known as improvements and test

    Follow the steps below to disable the improvements:
    a. Click Start, and then go to the control panel.
    b. click sound.
    c. Select the playback tab.
    d. Enter select speakers/headphones
    e. click Properties
    f. Select enhancements tab
    g. disable all improvements
    h. restart the computer

    Refer to this article for help:

    Tips for solving common audio problems
    http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

    Kind regards
    Afzal Taher
    Microsoft technical support engineer

  • Media Player 12 is not playing music through all before only speakers (5.1) 2 & void.

    Once I've changed in XP to windows 7, I have not noticed Media Player no more playes music through all 5 speakers.  The system is configured correctly, and DVD in 5.1, but no music more plays.

    I read that vista has a tab under the speaker Configuration to allow 'fill improvement', but it's not in Windows 7.   As I noticed this problem I installed the drivers for my audio hardware, but still no option anywhere to play music on the speakers.

    How can I fix it?

    If you have an audio device realtek hd, you can go directly to the site and get the most recent update.  It tends to be more up-to-date than what Microsoft pushes.  From my experience with Realtek and Windows 7, it makes a big difference to get the most recent drivers from them.

    Are your speakers connected directly to your computer or you are using an optical output to a receiver?

    Do you know what type of audio device you have?

    IF you are connected to a receiver, do not forget that the DVD is integrated with the encoding for if there is something to your receiver to surround sound.  You need something to take 2 channels of audio and turn it into surround sound before being recognized.  You CAN turn his 2 surround channels simulated on most receivers clicking through the dolby settings, but the question remains that everything worked fine before the upgrade.

    Insofar as this change in the upgrade from XP to 7, it looks like a driver problem.  WMP is designed to recognize the encoding it is fed, but not to assign any what additional coding.  Your driver will be award any additional improvement and manage the allocation of the audio to the appropriate channels.

  • Problems playing and extraction of some discs in WMP

    I have usually no problem playing and ripping disks on my hard drive using WMP (W7). However, I have problems with some types HDCD discs. An example of this is Neil Young's "Greatest Hits", it will not play WMP poster art, the title of the album etc plus all the track names and rip box is checked, but when I click the icon burn, nothing happens. There are no error messages either. Is there a way to turn it?

    Thanks in advance for an answer

    Hello

    Thanks for posting your question in the Microsoft Community.

    From the information, you can not play and rip some discs as HDCD by using Windows Media Player 12 (WMP).

    Since WMP 9, it is possible to decode and play active HDCD CD.

    This problem occurs if the file as HDCD extension is not supported by Windows Media Player 12.

    You can use your favorite search engine to look for a software that can convert the file for use in Windows Media Player.

    Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

    For more information on the types of files supported by Windows Media Player, you can also view the following link:

    Information on the types of media files that supports Windows Media Player

    Note: This also applies to WMP 12.

    Also see the article:

    Windows Media Player frequently asked questions

    Hope the helps of information.

    If you need further assistance, please answer and we will be happy to help you.

  • I rented a movie on google play. He will not play. I get a message that says: "there was a problem playing the video on this browser. Help!

    I rented the movie and proceeded to go to google play to see. It acts like it is loading, but the screen goes black and a message says: "there was a problem playing the video on this browser. Try the movies play & TV Chrome App. Learn how to install Chrome and chromium app here. problem: I tried to download Chrome (which I don't like), but it seems not to take. I even rebooted. Google opens upward in Chrome. I really want to watch this movie! Help!

    Try:

  • I've recently upgraded to El Capitan - biggest problem is timing removed all the entries in my previous ical. Any ideas how I can track down the file containing these essential documents and install in the new program?

    I've recently upgraded to El Capitan - biggest problem is timing removed all the entries in my previous ical. Any ideas how I can track down the file containing these essential documents and install in the new program?

    All calendars are enabled in the sidebar?

  • There was a problem playing this file. (0xC00D0FEA: "Windows Media Player has encountered a problem during the download of the file.) For any additional help, click Help on the Web. »)

    Outlook has been changed from hotmail, my emails say don't link with windows media player, outlook is not their problem, but it happened only when they merged account

    I have to be able to open MP3 files that ae sent emails in my work, it's urgent, please I need to know what settings to correct to sort this please

    It comes to getting the error message

    There was a problem playing this file. (0xC00D0FEA: "Windows Media Player has encountered a problem during the download of the file.) For any additional help, click Help on the Web. »)

    E-mail address is removed from the privacy *.

    Hello

    Method 1:

    See the article and check if that helps:

    Windows Media Player sync: frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Media-Player-sync-frequently-asked-questions

    Method 2:

    I suggest also refer to the thread with a similar problem and a possible solution:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-pictures/error-when-trying-to-play-media-files-Windows/4abe7be7-b3fe-44eb-b4da-e0848c3c8bd4

    It will be useful.

  • Hi, I have 0xc0000142 error when I start the first pro after the last update, before that I had no problem playing first pro...!

    Hi, I have 0xc0000142 error when I start the first pro after the last update, before that I had no problem playing first pro...!

    Hello Gene,

    You may need to check this: Re: Premiere Pro 2015 won't open after the recent update

    Kind regards

    Navdeep Pandey

  • I am new to Muse, so I am following the tutorial for coffee of Katie.  I downloaded the sample files.  The problem is not that all the files in the folder as in the tutorial.  The color swatch for example is not there.  The updated CC on the road Katies.m

    I am new to Muse, so I am following the tutorial for coffee of Katie.  I downloaded the sample files.  The problem is not that all the files in the folder as in the tutorial.  The color swatch for example is not there.  The CC file to get started Katies.mulib is also not if you can't automatically download all the necessary files.  Can anyone help?

    found in another area

    Where can I find updated cc enroute Katies.mulib file?

  • Problems with DirectX, you cannot start any game.

    Hello, I just joined here because I can't find an answer anywhere, I hope you can help me :)

    As the title says, I have problems to run games on my lap top, I can't run any game I have installed on it, they all show an error or do not launch at all. First of all for all, my computer specs:
    HP Pavilion dv7, running Windows 7 edition full 64-bit
    Intel Core i7 Q720 @1. 60 Ghz
    6 GB of RAM
    GeForce GT 320M with Directx 11
    And the games I've tried so far:
    -Roller coaster tycoon 3 Platinum (it shows Directx 9 not found)
    -Euro Truck Simulator 1 (in the settings window, I can't change between OpenGL and Directx, and it will not open with OpenGl I don't know why)
    -Euro Truck Simulator 2 (it crashes just before the splash screen)
    -Grand Theft Auto San Andreas (similar to the 2 Euro truck Simulator)
    -Age of Mythology - The Titans Expansion ('Failed to initialize')
    And I must say that all of these games has a great like 5 months ago (Yes, I have 5 months without playing an any of them).
    I will zoom checked drivers video card, update to the latest directx and I tried to downgrade my directx to version 10, but it seems to be impossible.
    It also shows, on DX diag on the section "Screen", DirectDraw, Direct3D and AGP Texture as 'unavailable '.
    Any ideas on how I can solve it? Thanks in advance, if you need info. just tell me :)

    Thank you for your quick response, I solved it today morning, I had to downgrade somehow the video card drivers and thn update again, and it worked, if anyone has the same problem, try to do this and hope it works for you also.

    Thanks, Imran M.
  • White all included Vista Games hang with card shuffle and its screen

    Hello

    Have you met the danrdest thing I've ever seen with Vista Home Premium 32 bit...

    All included Microsoft games (Solitaire... Spider Solitaire... etc... all 8 or 9 of them) can be started from their icons... But when the game starts to load, I hear a noise to shuffle the cards and the game hangs on a white screen after asking on the use of las score (in the case of spider solitaire).

    I can't for the life of me think what I did to cause this error... This is the first time I've not been able to track down other users with the same problem.  I saw the cupboards is some people including the games hang on a black screen... but mine is on a white screen with this funny shuffle-like sound card.

    Shuffle sound card (some think it's sound like a babbling-brook (stream)... that happens on all the games I've tried...

    I already tried the most basic things like uninstalling and reinstalling games... Install the Vista SP1...  No change in this weird problem...

    ANY ideas would be appreciated...  I'm proud of myself to be able to track down such things...

    It has hair I left turn more grey...

    Thanks in advance!

    SD1

    Well, I suggest you update your graphics and sound card drivers.   If this does not work, maybe DirectX must be reinstalled.  I guess that the partition table may be corrupted since it has a losing hand when he was asked about it, but I would have thought uninstalling and reinstalling would have cleared that.  I try different graphics drivers and see if it works for you.

Maybe you are looking for

  • VGA port stopped working

    I have a desktop HP p6000 computer, running Windows 7, and the VGA port should have stopped working.  The monitor is no longer working or showing no signal.  I tried the cable and the screen with my laptop and both work very well.  I opened the side

  • Import of CSV with loop value FOR

    Good afternoon I'm new to LabView and trying to write a VI that will eventually run a set of calculations on a set of data with millions of data points. I want the VI to count the number of data imported points of the. As they are written to a CSV fi

  • Office - 2007 on Windows XP SP3 SaveAs Dialogbox crashes

    Hello Every time I open a new spreadsheet or document or the TPP and just try to do a save as to save a name office crashes. The only solution I've found so far is to create an empty txt file, rename the extension .xlxs or docx, pptx and then open th

  • Windows Vista ISO

    Someone has a good and updated link for Vista ISO? I got Home 32 bit.

  • remote procedure call fail error fo vista SP2 printer installation

    I'm trying to reinstall my printer drivers and the HP software. I get the Windows Installer is not available. I have looked up lots of info on this and have tried many things but still seem to have a problem. This last time, I got the error message "